libertas ub8xxx - bcdDevice 30.06 - firmware issues?

[Luis R. Rodriguez]

Sorry CC'd linux-kernel, meant linux-wireless ;)

On Nov 16, 2007 8:26 PM, Luis R. Rodriguez <mcgrof at gmail.com> wrote:
> I have a USB libertas 1286:2001 with bcdDevice 30.06 (from lsusb -v).
> I tried downloading the firmware from marvell:
>
> https://www.marvell.com/drivers/driverDisplay.do?dId=160&pId=38
>
> renaming and to usb8388.bin and putting it in firmware dir. Is this
> the right firmware??
>
> Upon load this is what I get:
>
> 17:58 < mcgrof> usb8xxx: URB in failure status: -71
> 17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
> and address 3
> 17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
> and address 3
> 17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
> and address 3
> 17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
> and address 3
> 17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
> and address 3
> 17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
> and address 3
> 17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
> and address 3
> 17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
> and address 3
> 17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
> and address 3
> 17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
> and address 3
> 17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
> and address 3
> 17:58 < mcgrof> usb8xxx: probe of 4-1:1.0 failed with error -12
> 17:58 < mcgrof> usbcore: registered new interface driver usb8xxx
>
> I'm using the compatibility package from:
>
> http://linuxwireless.org/en/users/Download
>
> on 2.6.22. So this driver reflects what's on
> wireless2.6.git#everything. I tried looking on the wiki but well can't
> find much information. Can we please start adding some info about this
> driver to:
>
> http://linuxwireless.org/en/users/Drivers/libertas
>
>   Luis
>