libertas_sdio on at91sam9263

[Holger Schurig]

> try enabling debug in the libertas driver and disable it in
> the mmc/sd stack. I think there is a timing problem when
> downloading the firmware, if there is a lot of printk, the
> firmware upload will fail...

You can use hex numbers to enable debug, but there's a little
tool named "lbsdebug" that makes turning debug on/off a little easier.

http://git.infradead.org/?p=users/schurig/libertas-tools.git

git clone git://git.infradead.org/users/schurig/libertas-tools.git