root@OpenWrt:~# dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.14.34 (lulz@lulz) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r6726+2-fdf2e1fe1e)) #0 SMP Wed Apr 25 22:01:06 2018
[    0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[    0.000000] OF: fdt: Machine model: Netgear Nighthawk X4S R7800
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 122880
[    0.000000] free_area_init_node: node 0, pgdat c0b3aac0, node_mem_map dda39000
[    0.000000]   Normal zone: 960 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 122880 pages, LIFO batch:31
[    0.000000] random: get_random_bytes called from start_kernel+0x88/0x408 with crng_init=0
[    0.000000] percpu: Embedded 15 pages/cpu @dda00000 s29260 r8192 d23988 u61440
[    0.000000] pcpu-alloc: s29260 r8192 d23988 u61440 alloc=15*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 121920
[    0.000000] Kernel command line: 
[    0.000000] Bootloader command line (ignored): console=ttyHSL1,115200n8
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 476260K/491520K available (4720K kernel code, 236K rwdata, 1304K rodata, 1024K init, 244K bss, 15260K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xde800000 - 0xff800000   ( 528 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xde000000   ( 480 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0208000 - 0xc079c0e0   (5713 kB)
[    0.000000]       .init : 0xc0a00000 - 0xc0b00000   (1024 kB)
[    0.000000]       .data : 0xc0b00000 - 0xc0b3b3c0   ( 237 kB)
[    0.000000]        .bss : 0xc0b3d000 - 0xc0b7a274   ( 245 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
[    0.000006] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
[    0.000019] Switching to timer-based delay loop, resolution 160ns
[    0.000220] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
[    0.000244] pid_max: default: 32768 minimum: 301
[    0.000367] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000384] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000943] CPU: Testing write buffer coherency: ok
[    0.001656] Setting up static identity map for 0x42300000 - 0x42300060
[    0.001805] Hierarchical SRCU implementation.
[    0.002504] smp: Bringing up secondary CPUs ...
[    0.004267] smp: Brought up 1 node, 2 CPUs
[    0.004281] SMP: Total of 2 processors activated (25.00 BogoMIPS).
[    0.004292] CPU: All CPU(s) started in SVC mode.
[    0.015611] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
[    0.015786] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.015811] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.015924] pinctrl core: initialized pinctrl subsystem
[    0.017020] NET: Registered protocol family 16
[    0.017267] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.018622] cpuidle: using governor ladder
[    0.018687] cpuidle: using governor menu
[    0.020816] qcom_rpm 108000.rpm: could not find pctldev for node /soc/pinmux@800000/i2c4_pinmux, deferring probe
[    0.041120] msm_bus_fabric_init_driver
[    0.042637] usbcore: registered new interface driver usbfs
[    0.042723] usbcore: registered new interface driver hub
[    0.042807] usbcore: registered new device driver usb
[    0.042859] pps_core: LinuxPPS API ver. 1 registered
[    0.042870] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.042901] PTP clock support registered
[    0.044619] clocksource: Switched to clocksource dg_timer
[    0.047909] NET: Registered protocol family 2
[    0.048432] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.048470] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.048522] TCP: Hash tables configured (established 4096 bind 4096)
[    0.048610] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.048634] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.048808] NET: Registered protocol family 1
[    0.048856] PCI: CLS 0 bytes, default 64
[    0.049996] No memory allocated for crashlog
[    0.050200] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[    0.055196] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.055211] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.057816] random: fast init done
[    0.061854] io scheduler noop registered
[    0.061869] io scheduler deadline registered (default)
[    0.063685] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda not found, using dummy regulator
[    0.063806] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_phy not found, using dummy regulator
[    0.063892] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_refclk not found, using dummy regulator
[    0.064585] OF: PCI: host bridge /soc/pci@1b500000 ranges:
[    0.064631] OF: PCI:    IO 0x0fe00000..0x0fefffff -> 0x0fe00000
[    0.064656] OF: PCI:   MEM 0x08000000..0x0fdfffff -> 0x08000000
[    1.096756] qcom-pcie 1b500000.pci: phy link never came up
[    1.098752] qcom-pcie 1b500000.pci: cannot initialize host
[    1.099340] qcom-pcie: probe of 1b500000.pci failed with error -110
[    1.099677] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda not found, using dummy regulator
[    1.099769] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_phy not found, using dummy regulator
[    1.099869] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_refclk not found, using dummy regulator
[    1.100536] OF: PCI: host bridge /soc/pci@1b700000 ranges:
[    1.100573] OF: PCI:    IO 0x31e00000..0x31efffff -> 0x31e00000
[    1.100596] OF: PCI:   MEM 0x2e000000..0x31dfffff -> 0x2e000000
[    2.133269] qcom-pcie 1b700000.pci: phy link never came up
[    2.135230] qcom-pcie 1b700000.pci: cannot initialize host
[    2.135750] qcom-pcie: probe of 1b700000.pci failed with error -110
[    2.138363] L2 @ QSB rate. Forcing new rate.
[    2.138579] L2 @ 384000 KHz
[    2.139081] CPU0 @ 800000 KHz
[    2.139093] CPU1 @ QSB rate. Forcing new rate.
[    2.139217] CPU1 @ 384000 KHz
[    2.143203] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
[    2.144644] gsbi 1a200000.gsbi: GSBI port protocol: 3 crci: 0
[    2.146328] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    2.147157] msm_serial 16340000.serial: msm_serial: detected port #0
[    2.147263] msm_serial 16340000.serial: uartclk = 7372800
[    2.147346] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 99, base_baud = 460800) is a MSM
[    2.147383] msm_serial: console setup on port #0
[    2.794644] console [ttyMSM0] enabled
[    2.799780] msm_serial: driver initialized
[    2.808393] loop: module loaded
[    2.810415] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xa1
[    2.810448] nand: AMD/Spansion S34MS01G2
[    2.817049] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    2.820965] 10 fixed-partitions partitions found on MTD device qcom_nand.0
[    2.828325] Creating 10 MTD partitions on "qcom_nand.0":
[    2.835176] 0x000000000000-0x000000c80000 : "qcadata"
[    2.862672] 0x000000c80000-0x000001180000 : "APPSBL"
[    2.871948] 0x000001180000-0x000001200000 : "APPSBLENV"
[    2.873570] 0x000001200000-0x000001340000 : "art"
[    2.878907] 0x000001340000-0x000001480000 : "artbak"
[    2.883680] 0x000001480000-0x000001880000 : "kernel"
[    2.893467] 0x000001880000-0x000003480000 : "ubi"
[    2.942015] 0x000003480000-0x000007900000 : "netgear"
[    3.059560] 0x000007900000-0x000008000000 : "reserve"
[    3.072217] 0x000001480000-0x000003480000 : "firmware"
[    3.128647] no rootfs found after FIT image in "firmware"
[    3.129593] spi_qup 1a280000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[    3.136092] m25p80 spi0.0: unrecognized JEDEC id bytes: 00, 00, 00
[    3.140186] m25p80: probe of spi0.0 failed with error -2
[    3.147682] libphy: GPIO Bitbanged MDIO: probed
[    3.175913] switch0: Atheros AR8337 rev. 2 switch registered on gpio-0
[    4.093670] libphy: Fixed MDIO Bus: probed
[    4.096688] ipq806x-gmac-dwmac 37200000.ethernet: PTP uses main clock
[    4.097183] stmmac - user ID: 0x10, Synopsys ID: 0x37
[    4.103190] ipq806x-gmac-dwmac 37200000.ethernet: Ring mode enabled
[    4.108349] ipq806x-gmac-dwmac 37200000.ethernet: DMA HW capability register supported
[    4.114303] ipq806x-gmac-dwmac 37200000.ethernet: Enhanced/Alternate descriptors
[    4.122416] ipq806x-gmac-dwmac 37200000.ethernet: Enabled extended descriptors
[    4.129917] ipq806x-gmac-dwmac 37200000.ethernet: RX Checksum Offload Engine supported
[    4.136982] ipq806x-gmac-dwmac 37200000.ethernet: COE Type 2
[    4.144767] ipq806x-gmac-dwmac 37200000.ethernet: TX Checksum insertion supported
[    4.150663] ipq806x-gmac-dwmac 37200000.ethernet: Wake-Up On Lan supported
[    4.158071] ipq806x-gmac-dwmac 37200000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    4.166854] ipq806x-gmac-dwmac 37400000.ethernet: PTP uses main clock
[    4.173606] stmmac - user ID: 0x10, Synopsys ID: 0x37
[    4.179802] ipq806x-gmac-dwmac 37400000.ethernet: Ring mode enabled
[    4.184698] ipq806x-gmac-dwmac 37400000.ethernet: DMA HW capability register supported
[    4.190893] ipq806x-gmac-dwmac 37400000.ethernet: Enhanced/Alternate descriptors
[    4.198876] ipq806x-gmac-dwmac 37400000.ethernet: Enabled extended descriptors
[    4.206394] ipq806x-gmac-dwmac 37400000.ethernet: RX Checksum Offload Engine supported
[    4.213347] ipq806x-gmac-dwmac 37400000.ethernet: COE Type 2
[    4.221327] ipq806x-gmac-dwmac 37400000.ethernet: TX Checksum insertion supported
[    4.227167] ipq806x-gmac-dwmac 37400000.ethernet: Wake-Up On Lan supported
[    4.234440] ipq806x-gmac-dwmac 37400000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    4.242259] i2c /dev entries driver
[    4.251097] Calibration not found.
[    4.253012] qcom-tsens 900000.thermal-sensor: tsens calibration failed
[    4.258290] Speed bin: 0
[    4.262985] PVS bin: 4
[    4.267662] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
[    4.267959] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
[    4.275912] sdhci: Secure Digital Host Controller Interface driver
[    4.282347] sdhci: Copyright(c) Pierre Ossman
[    4.288706] sdhci-pltfm: SDHCI platform and OF driver helper
[    4.295587] NET: Registered protocol family 10
[    4.300852] Segment Routing with IPv6
[    4.303125] NET: Registered protocol family 17
[    4.307475] 8021q: 802.1Q VLAN Support v1.8
[    4.311130] Registering SWP/SWPB emulation handler
[    4.331979] qcom_rpm 108000.rpm: RPM firmware 3.0.16777364
[    4.346523] s1a: supplied by regulator-dummy
[    4.346641] s1a: Bringing 0uV into 1050000-1050000uV
[    4.350282] s1b: supplied by regulator-dummy
[    4.354913] s1b: Bringing 0uV into 1050000-1050000uV
[    4.359444] s2a: supplied by regulator-dummy
[    4.364089] s2a: Bringing 0uV into 775000-775000uV
[    4.368742] s2b: supplied by regulator-dummy
[    4.372944] s2b: Bringing 0uV into 775000-775000uV
[    4.383954] UBI: auto-attach mtd6
[    4.383996] ubi0: attaching mtd6
[    4.391215] random: crng init done
[    4.436569] UBI: EOF marker found, PEBs from 30 will be erased
[    4.464121] ubi0: scanning is finished
[    4.490203] ubi0: volume 1 ("rootfs_data") re-sized from 9 to 172 LEBs
[    4.490663] ubi0: attached mtd6 (name "ubi", size 28 MiB)
[    4.495697] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    4.501080] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    4.507903] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[    4.514710] ubi0: good PEBs: 224, bad PEBs: 0, corrupted PEBs: 0
[    4.521524] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[    4.527804] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 319252012
[    4.534765] ubi0: available PEBs: 0, total reserved PEBs: 224, PEBs reserved for bad PEB handling: 20
[    4.543870] ubi0: background thread "ubi_bgt0d" started, PID 61
[    4.544448] block ubiblock0_0: created from ubi0:0(rootfs)
[    4.544451] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[    4.544456] hctosys: unable to open rtc device (rtc0)
[    5.094643] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[    5.095832] Freeing unused kernel memory: 1024K
[    5.356328] init: Console is alive
[    5.356445] init: - watchdog -
[    6.261774] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    6.314645] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    6.316645] SCSI subsystem initialized
[    6.322448] libata version 3.00 loaded.
[    6.324634] ahci 29000000.sata: forcing port_map 0x0 -> 0x1
[    6.324678] ahci 29000000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[    6.329329] ahci 29000000.sata: flags: ncq sntf pm led clo only pmp pio slum part ccc apst 
[    6.338411] scsi host0: ahci
[    6.346302] ata1: SATA max UDMA/133 mmio [mem 0x29000000-0x2900017f] port 0x100 irq 26
[    6.676787] ata1: SATA link down (SStatus 0 SControl 300)
[    6.681073] ehci-platform: EHCI generic platform driver
[    6.689089] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    6.690384] ohci-platform: OHCI generic platform driver
[    6.831818] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    6.831865] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[    6.836465] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[    6.843860] xhci-hcd xhci-hcd.0.auto: irq 104, io mem 0x11000000
[    6.853661] hub 1-0:1.0: USB hub found
[    6.858806] hub 1-0:1.0: 1 port detected
[    6.862563] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    6.866425] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[    6.871813] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    6.879844] hub 2-0:1.0: USB hub found
[    6.887678] hub 2-0:1.0: 1 port detected
[    6.891440] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    6.895227] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[    6.900682] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[    6.908126] xhci-hcd xhci-hcd.1.auto: irq 105, io mem 0x10000000
[    6.917357] hub 3-0:1.0: USB hub found
[    6.922982] hub 3-0:1.0: 1 port detected
[    6.926842] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    6.930561] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[    6.936045] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    6.943973] hub 4-0:1.0: USB hub found
[    6.951864] hub 4-0:1.0: 1 port detected
[    6.957918] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    6.961510] init: - preinit -
[    8.834536] Generic PHY fixed-0:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:01, irq=POLL)
[    8.836437] dwmac1000: Master AXI performs any burst length
[    8.843453] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[    8.849147] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[    8.859275] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[    9.915247] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[    9.915346] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   12.030802] UBIFS (ubi0:1): default file-system created
[   12.032253] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 143
[   12.143024] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[   12.143071] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[   12.149979] UBIFS (ubi0:1): FS size: 20570112 bytes (19 MiB, 162 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs)
[   12.159847] UBIFS (ubi0:1): reserved for root: 971576 bytes (948 KiB)
[   12.170120] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID 26BAD019-D58B-4B92-B132-F0747773196C, small LPT model
[   12.179660] mount_root: overlay filesystem has not been fully initialized yet
[   12.188166] mount_root: switching to ubifs overlay
[   12.227266] urandom-seed: Seed file not found (/etc/urandom.seed)
[   12.313337] procd: - early -
[   12.313473] procd: - watchdog -
[   12.967997] procd: - watchdog -
[   12.968485] procd: - ubus -
[   13.028836] procd: - init -
[   13.159963] kmodloader: loading kernel modules from /etc/modules.d/*
[   13.163050] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   13.461400] Netfilter messages via NETLINK v0.30.
[   13.463786] ip_set: protocol 6
[   13.485341] u32 classifier
[   13.485361]     input device check on
[   13.486932]     Actions configured
[   13.492342] Mirror/redirect action on
[   13.497729] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
[   13.500995] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
[   13.503780] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[   13.513160] ip_tables: (C) 2000-2006 Netfilter Core Team
[   14.062095] xt_time: kernel timezone is -0000
[   14.252746] PPP generic driver version 2.4.2
[   14.254460] NET: Registered protocol family 24
[   14.265153] kmodloader: done loading kernel modules from /etc/modules.d/*
[   21.418709] Generic PHY fixed-0:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:01, irq=POLL)
[   21.419666] dwmac1000: Master AXI performs any burst length
[   21.427728] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[   21.433140] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[   21.442277] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   21.457888] br-lan: port 1(eth1.1) entered blocking state
[   21.457939] br-lan: port 1(eth1.1) entered disabled state
[   21.462524] device eth1.1 entered promiscuous mode
[   21.467765] device eth1 entered promiscuous mode
[   21.475878] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[   21.486244] Generic PHY fixed-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:00, irq=POLL)
[   21.487305] dwmac1000: Master AXI performs any burst length
[   21.495285] ipq806x-gmac-dwmac 37200000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[   21.500718] ipq806x-gmac-dwmac 37200000.ethernet eth0: registered PTP clock
[   21.510207] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   21.527969] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready
[   22.475060] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[   22.477701] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   22.483388] br-lan: port 1(eth1.1) entered blocking state
[   22.489103] br-lan: port 1(eth1.1) entered forwarding state
[   22.515056] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   22.555077] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[   22.555137] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   22.563226] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready

