[LEDE-DEV] [PATCH] brcm2708: USB tethering by default

[Christo Nedev]

Signed-off-by: Christo Nedev <christo.nedev at gmail.com>
---
 target/linux/brcm2708/Makefile                          |  1 +
 target/linux/brcm2708/base-files/etc/board.d/02_network | 13 ++++++++++++-
 2 files changed, 13 insertions(+), 1 deletion(-)

diff --git a/target/linux/brcm2708/Makefile b/target/linux/brcm2708/Makefile
index 14dd76972a..c2018e2a91 100644
--- a/target/linux/brcm2708/Makefile
+++ b/target/linux/brcm2708/Makefile
@@ -25,6 +25,7 @@ include $(INCLUDE_DIR)/target.mk
 DEFAULT_PACKAGES += \
 	brcm2708-gpu-fw \
 	kmod-usb-hid \
+	kmod-usb-net kmod-usb-net-cdc-ether kmod-usb-net-rndis \
 	kmod-sound-core kmod-sound-arm-bcm2835 \
 	kmod-fs-vfat kmod-nls-cp437 kmod-nls-iso8859-1 \
 	brcmfmac-firmware-43430-sdio kmod-brcmfmac wpad-mini
diff --git a/target/linux/brcm2708/base-files/etc/board.d/02_network b/target/linux/brcm2708/base-files/etc/board.d/02_network
index c8449bb78f..2d3e1c2214 100755
--- a/target/linux/brcm2708/base-files/etc/board.d/02_network
+++ b/target/linux/brcm2708/base-files/etc/board.d/02_network
@@ -14,14 +14,25 @@ case "$board" in
 raspberrypi,model-b |\
 raspberrypi,model-b-plus |\
 raspberrypi,model-b-rev2 |\
-raspberrypi,2-model-b |\
+raspberrypi,2-model-b)
+	ucidef_set_interface_lan "eth0"
+	ucidef_set_interface_wan "usb0"
+	;;
+
 raspberrypi,3-model-b |\
 raspberrypi,3-model-b-plus)
 	ucidef_set_interface_lan "eth0"
+	ucidef_set_interface_lan "wlan0"
+	ucidef_set_interface_wan "usb0"
+	;;
+
+raspberrypi,model-zero)
+	ucidef_set_interface_lan "usb0"
 	;;
 
 raspberrypi,model-zero-w)
 	ucidef_set_interface_lan "wlan0"
+	ucidef_set_interface_wan "usb0"
 	;;
 esac
 
-- 
2.11.0