[LEDE-DEV] [PATCH 4/4] ath10k-ct: Add htt-mgt variants of ath10k-ct firmware.
greearb at candelatech.com
greearb at candelatech.com
Tue Mar 20 15:39:55 PDT 2018
From: Ben Greear <greearb at candelatech.com>
The HTT-MGT variants transport management frames over the
normal HTT tx path, just like data frames. This saves
limitted WMI buffers which can become depleted if lots of
management frames become stuck in TX queues due to peer
that went away.
In addition, at least for the wave-1 firmware, htt-mgt is
required in order for 802.11r (fast roaming) authentication
to function properly.
The htt-mgt firmware requires the use of the ath10k-ct
driver. Normal non-htt-mgt ath10k-ct firmware should work
with stock drivers.
Signed-off-by: Ben Greear <greearb at candelatech.com>
---
package/firmware/ath10k-firmware/Makefile | 250 ++++++++++++++++++++++++++----
1 file changed, 217 insertions(+), 33 deletions(-)
diff --git a/package/firmware/ath10k-firmware/Makefile b/package/firmware/ath10k-firmware/Makefile
index 9dccd12..0099146 100644
--- a/package/firmware/ath10k-firmware/Makefile
+++ b/package/firmware/ath10k-firmware/Makefile
@@ -71,6 +71,14 @@ define Download/ath10k-firmware-qca988x-ct
endef
$(eval $(call Download,ath10k-firmware-qca988x-ct))
+QCA988X_FIRMWARE_FILE_CT_HTT:=firmware-2-ct-full-htt-mgt-community-20.bin.lede.001
+define Download/ath10k-firmware-qca988x-ct-htt
+ $(call Download/ct-firmware-htt,QCA988X,)
+ HASH:=a1f90d9de19bb148f3e4c6570bf7572cf90c7c6870d0afcf8a87d67114eab701
+endef
+$(eval $(call Download,ath10k-firmware-qca988x-ct-htt))
+
+
QCA9887_FIRMWARE_FILE_CT:=firmware-2-ct-full-community-20.bin.lede.001
define Download/ath10k-firmware-qca9887-ct
$(call Download/ct-firmware,QCA9887,ath10k-9887)
@@ -78,6 +86,14 @@ define Download/ath10k-firmware-qca9887-ct
endef
$(eval $(call Download,ath10k-firmware-qca9887-ct))
+QCA9887_FIRMWARE_FILE_CT_HTT:=firmware-2-ct-full-htt-mgt-community-20.bin.lede.001
+define Download/ath10k-firmware-qca9887-ct-htt
+ $(call Download/ct-firmware-htt,QCA9887,ath10k-9887)
+ HASH:=f31e5f5f546ef7c104b9526d0a95faf4c291b21e7512a19f624c5a015dee80f1
+endef
+$(eval $(call Download,ath10k-firmware-qca9887-ct-htt))
+
+
QCA99X0_FIRMWARE_FILE_CT:=firmware-5-ct-full-community-10.bin-lede.001
define Download/ath10k-firmware-qca99x0-ct
$(call Download/ct-firmware,QCA99X0,ath10k-10-4)
@@ -85,6 +101,14 @@ define Download/ath10k-firmware-qca99x0-ct
endef
$(eval $(call Download,ath10k-firmware-qca99x0-ct))
+QCA99X0_FIRMWARE_FILE_CT_HTT:=firmware-5-ct-full-htt-mgt-community-10.bin-lede.001
+define Download/ath10k-firmware-qca99x0-ct-htt
+ $(call Download/ct-firmware-htt,QCA99X0,ath10k-10-4)
+ HASH:=520f0ecfeba034056a196793d2f0e628d4c89bd1080c6a811fdc3a4b35bfe8d6
+endef
+$(eval $(call Download,ath10k-firmware-qca99x0-ct-htt))
+
+
QCA9984_FIRMWARE_FILE_CT:=firmware-5-ct-full-community-10.bin-lede.001
define Download/ath10k-firmware-qca9984-ct
$(call Download/ct-firmware,QCA9984,ath10k-9984-10-4)
@@ -92,6 +116,14 @@ define Download/ath10k-firmware-qca9984-ct
endef
$(eval $(call Download,ath10k-firmware-qca9984-ct))
+QCA9984_FIRMWARE_FILE_CT_HTT:=firmware-5-ct-full-htt-mgt-community-10.bin-lede.001
+define Download/ath10k-firmware-qca9984-ct-htt
+ $(call Download/ct-firmware-htt,QCA9984,ath10k-9984-10-4)
+ HASH:=cf18bd88f8995d383be25fe302b205b8cde3f593b88e34bdffe05732520abfde
+endef
+$(eval $(call Download,ath10k-firmware-qca9984-ct-htt))
+
+
QCA4019_FIRMWARE_FILE_CT_HTT:=firmware-5-ct-full-htt-mgt-community-10.bin-lede.003
define Download/ath10k-firmware-qca4019-ct-htt
$(call Download/ct-firmware-htt,QCA4019,ath10k-4019-10-4)
@@ -106,6 +138,7 @@ define Download/ath10k-firmware-qca4019-ct
endef
$(eval $(call Download,ath10k-firmware-qca4019-ct))
+
QCA9888_FIRMWARE_FILE_CT:=firmware-5-ct-full-community-10.bin-lede.003
define Download/ath10k-firmware-qca9888-ct
$(call Download/ct-firmware,QCA9888,ath10k-9888-10-4)
@@ -113,6 +146,14 @@ define Download/ath10k-firmware-qca9888-ct
endef
$(eval $(call Download,ath10k-firmware-qca9888-ct))
+QCA9888_FIRMWARE_FILE_CT_HTT:=firmware-5-ct-full-htt-mgt-community-10.bin-lede.003
+define Download/ath10k-firmware-qca9888-ct-htt
+ $(call Download/ct-firmware-htt,QCA9888,ath10k-9888-10-4)
+ HASH:=dc35c392cf2688a97ed5c4ca6490bd7a3d622bb711edb246b09a3d9a0b9dc0d0
+endef
+$(eval $(call Download,ath10k-firmware-qca9888-ct-htt))
+
+
define Package/ath10k-firmware-qca99x0
$(Package/ath10k-firmware-default)
TITLE:=ath10k firmware for QCA99x0 devices
@@ -127,6 +168,14 @@ $(Package/ath10k-firmware-default)
CATEGORY:=Firmware
PROVIDES:=ath10k-firmware-qca988x
endef
+define Package/ath10k-firmware-qca988x-ct-htt
+$(Package/ath10k-firmware-default)
+ TITLE:=ath10k CT 10.1 htt-mgt fw for QCA988x
+ SECTION:=firmware
+ CATEGORY:=Firmware
+ PROVIDES:=ath10k-firmware-qca988x
+ DEPENDS:=+kmod-ath10k-ct
+endef
define Package/ath10k-firmware-qca9887-ct
$(Package/ath10k-firmware-default)
@@ -135,6 +184,14 @@ $(Package/ath10k-firmware-default)
CATEGORY:=Firmware
PROVIDES:=ath10k-firmware-qca9887
endef
+define Package/ath10k-firmware-qca9887-ct-htt
+$(Package/ath10k-firmware-default)
+ TITLE:=ath10k CT 10.1 htt-mgt fw for QCA9887
+ SECTION:=firmware
+ CATEGORY:=Firmware
+ PROVIDES:=ath10k-firmware-qca9887
+ DEPENDS:=+kmod-ath10k-ct
+endef
define Package/ath10k-firmware-qca988x-ct/description
Alternative ath10k firmware for QCA988X from Candela Technologies.
@@ -144,6 +201,14 @@ This firmware will NOT be used unless the standard ath10k-firmware-qca988x
is un-selected since the driver will try to load firmware-5.bin before
firmware-2.bin
endef
+define Package/ath10k-firmware-qca988x-ct-htt/description
+Alternative ath10k firmware for QCA988X from Candela Technologies.
+Uses normal HTT TX data path for management frames, which improves
+stability in busy networks and fixes .11r authentication.
+Enables IBSS and other features. See:
+http://www.candelatech.com/ath10k-10.1.php
+This firmware selects and requires the ath10k-ct driver.
+endef
define Package/ath10k-firmware-qca9887-ct/description
Alternative ath10k firmware for QCA9887 from Candela Technologies.
@@ -152,6 +217,14 @@ http://www.candelatech.com/ath10k-10.1.php
This firmware conflicts with the standard 9887 firmware, so select only
one.
endef
+define Package/ath10k-firmware-qca9887-ct-htt/description
+Alternative ath10k firmware for QCA9887 from Candela Technologies.
+Uses normal HTT TX data path for management frames, which improves
+stability in busy networks and fixes .11r authentication.
+Enables IBSS and other features. See:
+http://www.candelatech.com/ath10k-10.1.php
+This firmware selects and requires the ath10k-ct driver.
+endef
define Package/ath10k-firmware-qca99x0-ct/description
Alternative ath10k firmware for QCA99x0 from Candela Technologies.
@@ -160,6 +233,14 @@ http://www.candelatech.com/ath10k-10.4.php
This firmware conflicts with the standard 99x0 firmware, so select only
one.
endef
+define Package/ath10k-firmware-qca99x0-ct-htt/description
+Alternative ath10k firmware for QCA99x0 from Candela Technologies.
+Uses normal HTT TX data path for management frames, which improves
+stability in busy networks and may be required for .11r authentication.
+Enables IBSS and other features. See:
+http://www.candelatech.com/ath10k-10.4.php
+This firmware selects and requires the ath10k-ct driver.
+endef
define Package/ath10k-firmware-qca9984-ct/description
Alternative ath10k firmware for QCA9984 from Candela Technologies.
@@ -168,11 +249,13 @@ http://www.candelatech.com/ath10k-10.4.php
This firmware conflicts with the standard 9984 firmware, so select only
one.
endef
-
-define Package/ath10k-firmware-qca4019-ct-htt/description
-Alternative ath10k firmware for IPQ4019 radio from Candela Technologies.
-Enables IBSS and other features. Requires ath10k-ct driver to function.
-See: http://www.candelatech.com/ath10k-10.4.php
+define Package/ath10k-firmware-qca9984-ct-htt/description
+Alternative ath10k firmware for QCA9984 from Candela Technologies.
+Uses normal HTT TX data path for management frames, which improves
+stability in busy networks and may be required for .11r authentication.
+Enables IBSS and other features. See:
+http://www.candelatech.com/ath10k-10.4.php
+This firmware selects and requires the ath10k-ct driver.
endef
define Package/ath10k-firmware-qca4019-ct/description
@@ -180,6 +263,14 @@ Alternative ath10k firmware for IPQ4019 radio from Candela Technologies.
Enables IBSS and other features. Works with standard or ath10k-ct driver.
See: http://www.candelatech.com/ath10k-10.4.php
endef
+define Package/ath10k-firmware-qca4019-ct-htt/description
+Alternative ath10k firmware for IPQ4019 radio from Candela Technologies.
+Uses normal HTT TX data path for management frames, which improves
+stability in busy networks and may be required for .11r authentication.
+Enables IBSS and other features.
+See: http://www.candelatech.com/ath10k-10.4.php
+This firmware selects and requires the ath10k-ct driver.
+endef
define Package/ath10k-firmware-qca9888-ct/description
Alternative ath10k firmware for QCA9886 and QCA9888 from Candela Technologies.
@@ -188,6 +279,15 @@ http://www.candelatech.com/ath10k-10.4.php
This firmware conflicts with the standard 9886 and 9888 firmware, so select only
one.
endef
+define Package/ath10k-firmware-qca9888-ct-htt/description
+Alternative ath10k firmware for QCA9886 and QCA9888 from Candela Technologies.
+Uses normal HTT TX data path for management frames, which improves
+stability in busy networks and may be required for .11r authentication.
+Enables IBSS and other features. See:
+http://www.candelatech.com/ath10k-10.4.php
+This firmware selects and requires the ath10k-ct driver.
+endef
+
define Package/ath10k-firmware-qca99x0/description
Standard ath10k firmware for QCA99x0 from QCA
@@ -202,6 +302,14 @@ $(Package/ath10k-firmware-default)
CATEGORY:=Firmware
PROVIDES:=ath10k-firmware-qca99x0
endef
+define Package/ath10k-firmware-qca99x0-ct-htt
+$(Package/ath10k-firmware-default)
+ TITLE:=ath10k CT 10.4 htt-mgt fw for QCA99x0
+ SECTION:=firmware
+ CATEGORY:=Firmware
+ PROVIDES:=ath10k-firmware-qca99x0
+ DEPENDS:=+kmod-ath10k-ct
+endef
define Package/ath10k-firmware-qca9984-ct
$(Package/ath10k-firmware-default)
@@ -210,15 +318,15 @@ $(Package/ath10k-firmware-default)
CATEGORY:=Firmware
PROVIDES:=ath10k-firmware-qca9984
endef
-
-define Package/ath10k-firmware-qca4019-ct-htt
+define Package/ath10k-firmware-qca9984-ct-htt
$(Package/ath10k-firmware-default)
- TITLE:=ath10k CT 10.4 htt-mgt for QCA4018/9
+ TITLE:=ath10k CT 10.4 htt-mgt fw for QCA9984
SECTION:=firmware
CATEGORY:=Firmware
- PROVIDES:=ath10k-firmware-qca4019
+ PROVIDES:=ath10k-firmware-qca9984
DEPENDS:=+kmod-ath10k-ct
endef
+
define Package/ath10k-firmware-qca4019-ct
$(Package/ath10k-firmware-default)
TITLE:=ath10k CT 10.4 firmware for QCA4018/9
@@ -226,6 +334,14 @@ $(Package/ath10k-firmware-default)
CATEGORY:=Firmware
PROVIDES:=ath10k-firmware-qca4019
endef
+define Package/ath10k-firmware-qca4019-ct-htt
+$(Package/ath10k-firmware-default)
+ TITLE:=ath10k CT 10.4 htt-mgt for QCA4018/9
+ SECTION:=firmware
+ CATEGORY:=Firmware
+ PROVIDES:=ath10k-firmware-qca4019
+ DEPENDS:=+kmod-ath10k-ct
+endef
define Package/ath10k-firmware-qca9888-ct
$(Package/ath10k-firmware-default)
@@ -234,6 +350,16 @@ $(Package/ath10k-firmware-default)
CATEGORY:=Firmware
PROVIDES:=ath10k-firmware-qca9888
endef
+define Package/ath10k-firmware-qca9888-ct-htt
+$(Package/ath10k-firmware-default)
+ TITLE:=ath10k CT 10.4 htt-mgt fw for QCA9886/8
+ SECTION:=firmware
+ CATEGORY:=Firmware
+ PROVIDES:=ath10k-firmware-qca9888
+ DEPENDS:=+kmod-ath10k-ct
+endef
+
+
define Package/ath10k-firmware-qca9984
$(Package/ath10k-firmware-default)
@@ -311,6 +437,37 @@ define Package/ath10k-firmware-qca988x/install
$(1)/lib/firmware/ath10k/QCA988X/hw2.0/firmware-5.bin
endef
+define Package/ath10k-firmware-qca6174/install
+ $(INSTALL_DIR) $(1)/lib/firmware/ath10k
+ $(CP) $(PKG_BUILD_DIR)/QCA6174 $(1)/lib/firmware/ath10k/
+endef
+
+define Package/ath10k-firmware-qca99x0/install
+ $(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA99X0/hw2.0
+ $(INSTALL_DATA) \
+ $(DL_DIR)/$(QCA99X0_BOARD_FILE) \
+ $(1)/lib/firmware/ath10k/QCA99X0/hw2.0/board-2.bin
+ $(INSTALL_DATA) \
+ $(PKG_BUILD_DIR)/QCA99X0/hw2.0/boardData_AR900B_CUS239_5G_v2_001.bin \
+ $(1)/lib/firmware/ath10k/QCA99X0/hw2.0/board.bin
+ $(INSTALL_DATA) \
+ $(PKG_BUILD_DIR)/QCA99X0/hw2.0/firmware-5.bin_10.4.1.00030-1 \
+ $(1)/lib/firmware/ath10k/QCA99X0/hw2.0/firmware-5.bin
+endef
+
+define Package/ath10k-firmware-qca9984/install
+ $(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9984/hw1.0
+ $(INSTALL_DATA) \
+ $(PKG_BUILD_DIR)/QCA9984/hw1.0/board-2.bin \
+ $(1)/lib/firmware/ath10k/QCA9984/hw1.0/board-2.bin
+ $(INSTALL_DATA) \
+ $(PKG_BUILD_DIR)/QCA9984/hw1.0/3.5.3/firmware-5.bin_10.4-3.5.3-00053 \
+ $(1)/lib/firmware/ath10k/QCA9984/hw1.0/firmware-5.bin
+endef
+
+
+# CT related firmware
+
define Package/ath10k-firmware-qca9887-ct/install
$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9887/hw1.0
$(INSTALL_DATA) \
@@ -320,6 +477,15 @@ define Package/ath10k-firmware-qca9887-ct/install
$(PKG_BUILD_DIR)/QCA9887/hw1.0/board.bin \
$(1)/lib/firmware/ath10k/QCA9887/hw1.0/board.bin
endef
+define Package/ath10k-firmware-qca9887-ct-htt/install
+ $(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9887/hw1.0
+ $(INSTALL_DATA) \
+ $(DL_DIR)/$(call CT_FIRMWARE_FILE_HTT,QCA9887) \
+ $(1)/lib/firmware/ath10k/QCA9887/hw1.0/ct-firmware-2.bin
+ $(INSTALL_DATA) \
+ $(PKG_BUILD_DIR)/QCA9887/hw1.0/board.bin \
+ $(1)/lib/firmware/ath10k/QCA9887/hw1.0/board.bin
+endef
define Package/ath10k-firmware-qca988x-ct/install
$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA988X/hw2.0
@@ -330,13 +496,17 @@ define Package/ath10k-firmware-qca988x-ct/install
$(DL_DIR)/$(call CT_FIRMWARE_FILE,QCA988X) \
$(1)/lib/firmware/ath10k/QCA988X/hw2.0/firmware-2.bin
endef
-
-define Package/ath10k-firmware-qca6174/install
- $(INSTALL_DIR) $(1)/lib/firmware/ath10k
- $(CP) $(PKG_BUILD_DIR)/QCA6174 $(1)/lib/firmware/ath10k/
+define Package/ath10k-firmware-qca988x-ct-htt/install
+ $(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA988X/hw2.0
+ $(INSTALL_DATA) \
+ $(PKG_BUILD_DIR)/QCA988X/hw2.0/board.bin \
+ $(1)/lib/firmware/ath10k/QCA988X/hw2.0/
+ $(INSTALL_DATA) \
+ $(DL_DIR)/$(call CT_FIRMWARE_FILE_HTT,QCA988X) \
+ $(1)/lib/firmware/ath10k/QCA988X/hw2.0/ct-firmware-2.bin
endef
-define Package/ath10k-firmware-qca99x0/install
+define Package/ath10k-firmware-qca99x0-ct/install
$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA99X0/hw2.0
$(INSTALL_DATA) \
$(DL_DIR)/$(QCA99X0_BOARD_FILE) \
@@ -345,11 +515,10 @@ define Package/ath10k-firmware-qca99x0/install
$(PKG_BUILD_DIR)/QCA99X0/hw2.0/boardData_AR900B_CUS239_5G_v2_001.bin \
$(1)/lib/firmware/ath10k/QCA99X0/hw2.0/board.bin
$(INSTALL_DATA) \
- $(PKG_BUILD_DIR)/QCA99X0/hw2.0/firmware-5.bin_10.4.1.00030-1 \
+ $(DL_DIR)/$(call CT_FIRMWARE_FILE,QCA99X0) \
$(1)/lib/firmware/ath10k/QCA99X0/hw2.0/firmware-5.bin
endef
-
-define Package/ath10k-firmware-qca99x0-ct/install
+define Package/ath10k-firmware-qca99x0-ct-htt/install
$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA99X0/hw2.0
$(INSTALL_DATA) \
$(DL_DIR)/$(QCA99X0_BOARD_FILE) \
@@ -358,48 +527,46 @@ define Package/ath10k-firmware-qca99x0-ct/install
$(PKG_BUILD_DIR)/QCA99X0/hw2.0/boardData_AR900B_CUS239_5G_v2_001.bin \
$(1)/lib/firmware/ath10k/QCA99X0/hw2.0/board.bin
$(INSTALL_DATA) \
- $(DL_DIR)/$(call CT_FIRMWARE_FILE,QCA99X0) \
- $(1)/lib/firmware/ath10k/QCA99X0/hw2.0/firmware-5.bin
+ $(DL_DIR)/$(call CT_FIRMWARE_FILE_HTT,QCA99X0) \
+ $(1)/lib/firmware/ath10k/QCA99X0/hw2.0/ct-firmware-5.bin
endef
-define Package/ath10k-firmware-qca9984/install
+define Package/ath10k-firmware-qca9984-ct/install
$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9984/hw1.0
$(INSTALL_DATA) \
$(PKG_BUILD_DIR)/QCA9984/hw1.0/board-2.bin \
$(1)/lib/firmware/ath10k/QCA9984/hw1.0/board-2.bin
$(INSTALL_DATA) \
- $(PKG_BUILD_DIR)/QCA9984/hw1.0/3.5.3/firmware-5.bin_10.4-3.5.3-00053 \
+ $(DL_DIR)/$(call CT_FIRMWARE_FILE,QCA9984) \
$(1)/lib/firmware/ath10k/QCA9984/hw1.0/firmware-5.bin
endef
-
-define Package/ath10k-firmware-qca9984-ct/install
+define Package/ath10k-firmware-qca9984-ct-htt/install
$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9984/hw1.0
$(INSTALL_DATA) \
$(PKG_BUILD_DIR)/QCA9984/hw1.0/board-2.bin \
$(1)/lib/firmware/ath10k/QCA9984/hw1.0/board-2.bin
$(INSTALL_DATA) \
- $(DL_DIR)/$(call CT_FIRMWARE_FILE,QCA9984) \
- $(1)/lib/firmware/ath10k/QCA9984/hw1.0/firmware-5.bin
+ $(DL_DIR)/$(call CT_FIRMWARE_FILE_HTT,QCA9984) \
+ $(1)/lib/firmware/ath10k/QCA9984/hw1.0/ct-firmware-5.bin
endef
-define Package/ath10k-firmware-qca4019-ct-htt/install
+define Package/ath10k-firmware-qca4019-ct/install
$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA4019/hw1.0
$(INSTALL_DATA) \
$(PKG_BUILD_DIR)/QCA4019/hw1.0/board-2.bin \
$(1)/lib/firmware/ath10k/QCA4019/hw1.0/
$(INSTALL_DATA) \
- $(DL_DIR)/$(call CT_FIRMWARE_FILE_HTT,QCA4019) \
- $(1)/lib/firmware/ath10k/QCA4019/hw1.0/ct-firmware-5.bin
+ $(DL_DIR)/$(call CT_FIRMWARE_FILE,QCA4019) \
+ $(1)/lib/firmware/ath10k/QCA4019/hw1.0/firmware-5.bin
endef
-
-define Package/ath10k-firmware-qca4019-ct/install
+define Package/ath10k-firmware-qca4019-ct-htt/install
$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA4019/hw1.0
$(INSTALL_DATA) \
$(PKG_BUILD_DIR)/QCA4019/hw1.0/board-2.bin \
$(1)/lib/firmware/ath10k/QCA4019/hw1.0/
$(INSTALL_DATA) \
- $(DL_DIR)/$(call CT_FIRMWARE_FILE,QCA4019) \
- $(1)/lib/firmware/ath10k/QCA4019/hw1.0/firmware-5.bin
+ $(DL_DIR)/$(call CT_FIRMWARE_FILE_HTT,QCA4019) \
+ $(1)/lib/firmware/ath10k/QCA4019/hw1.0/ct-firmware-5.bin
endef
define Package/ath10k-firmware-qca9888-ct/install
@@ -414,6 +581,18 @@ define Package/ath10k-firmware-qca9888-ct/install
$(DL_DIR)/$(call CT_FIRMWARE_FILE,QCA9888) \
$(1)/lib/firmware/ath10k/QCA9888/hw2.0/firmware-5.bin
endef
+define Package/ath10k-firmware-qca9888-ct-htt/install
+ $(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9888/hw2.0
+ ln -s \
+ ../../cal-pci-0000:01:00.0.bin \
+ $(1)/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
+ $(INSTALL_DATA) \
+ $(PKG_BUILD_DIR)/QCA9888/hw2.0/board-2.bin \
+ $(1)/lib/firmware/ath10k/QCA9888/hw2.0/board-2.bin
+ $(INSTALL_DATA) \
+ $(DL_DIR)/$(call CT_FIRMWARE_FILE_HTT,QCA9888) \
+ $(1)/lib/firmware/ath10k/QCA9888/hw2.0/ct-firmware-5.bin
+endef
$(eval $(call BuildPackage,ath10k-firmware-qca9887))
$(eval $(call BuildPackage,ath10k-firmware-qca9888))
@@ -424,9 +603,14 @@ $(eval $(call BuildPackage,ath10k-firmware-qca9984))
$(eval $(call BuildPackage,ath10k-firmware-qca4019))
$(eval $(call BuildPackage,ath10k-firmware-qca9887-ct))
+$(eval $(call BuildPackage,ath10k-firmware-qca9887-ct-htt))
$(eval $(call BuildPackage,ath10k-firmware-qca988x-ct))
+$(eval $(call BuildPackage,ath10k-firmware-qca988x-ct-htt))
$(eval $(call BuildPackage,ath10k-firmware-qca99x0-ct))
+$(eval $(call BuildPackage,ath10k-firmware-qca99x0-ct-htt))
$(eval $(call BuildPackage,ath10k-firmware-qca9984-ct))
-$(eval $(call BuildPackage,ath10k-firmware-qca4019-ct-htt))
+$(eval $(call BuildPackage,ath10k-firmware-qca9984-ct-htt))
$(eval $(call BuildPackage,ath10k-firmware-qca4019-ct))
+$(eval $(call BuildPackage,ath10k-firmware-qca4019-ct-htt))
$(eval $(call BuildPackage,ath10k-firmware-qca9888-ct))
+$(eval $(call BuildPackage,ath10k-firmware-qca9888-ct-htt))
--
2.4.11
More information about the Lede-dev
mailing list