[LEDE-DEV] sunxi: bpi-r1 switch configuration missing in latest development trunk for 18.0x

[TheWerthFam]

Yes,
switch driver is missing.  17.01.4 kernel log shows:  "b53_common: found 
switch: BCM53125, rev 4"

18.0x doesn't show any b53/BCM53125 switch information.
Thanks
     Derek

On 03/03/2018 08:30 PM, Rosen Penev wrote:
> On Sat, Mar 3, 2018 at 5:26 PM, TheWerthFam <thewerthfam at gmail.com> wrote:
>> 17.01.4 works great currently on this platform, just trying out the cutting
>> edge and found the switch configuration not existent.
>> swconfig list  returns no results.
>>
>> Normally swconfig returns
>> Found: switch0 - eth0
>> Found: switch1 - eth0
>>
>> The interfaces eth0.1 eth0.2 etc are created, but they don't pass any
>> traffic.  LAN ports and the WAN port LEDs seem to work in their normal
>> quirky way with devices connected but they don't pass any traffic.
>>
>> Any advice and direction of work that needs to be done would be appreciated.
>>
> Did you clear settings when upgrading? Please post /etc/config/network.
>
> This sounds like the switch driver is missing.
>> Cheers
>>      Derek
>>
>> _______________________________________________
>> Lede-dev mailing list
>> Lede-dev at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/lede-dev