[LEDE-DEV] [PATCH 1/4] ar71xx: add definitions for RouterBOARD hardware option bits

[Gabor Juhos]

Add bit definitions for the 'hardware options' tag which is used in
the MikroTik devices' hardware configurations. These values can be
used in board setup codes, to do different initialization sequences.
The values were obtained from the RouterOS 6.41-rc38 patches.

Additionally, introduce two helper functions what make the processing
of the hardware options easy.

Signed-off-by: Gabor Juhos <juhosg at freemail.hu>
---
 .../ar71xx/files/arch/mips/ath79/routerboot.h      | 26 ++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/routerboot.h b/target/linux/ar71xx/files/arch/mips/ath79/routerboot.h
index c1d7fb9ee0..cf189362d6 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/routerboot.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/routerboot.h
@@ -21,6 +21,32 @@ struct rb_info {
 	u32 hw_options;
 };
 
+/* Bit definitions for hardware options */
+#define RB_HW_OPT_UART_ABSENT		BIT(0)
+#define RB_HW_OPT_HAS_VOLTAGE		BIT(1)
+#define RB_HW_OPT_HAS_USB		BIT(2)
+#define RB_HW_OPT_HAS_ATTINY		BIT(3)
+#define RB_HW_OPT_NO_NAND		BIT(14)
+#define RB_HW_OPT_HAS_LCD		BIT(15)
+#define RB_HW_OPT_HAS_POE_OUT		BIT(16)
+#define RB_HW_OPT_HAS_uSD		BIT(17)
+#define RB_HW_OPT_HAS_SFP		BIT(20)
+#define RB_HW_OPT_HAS_WIFI		BIT(21)
+#define RB_HW_OPT_HAS_TS_FOR_ADC	BIT(22)
+#define RB_HW_OPT_HAS_PLC		BIT(29)
+
+static inline bool
+rb_hw_option_match(const struct rb_info *info, u32 mask, u32 val)
+{
+	return (info->hw_options & (val | mask)) == val;
+}
+
+static inline bool
+rb_has_hw_option(const struct rb_info *info, u32 mask)
+{
+	return rb_hw_option_match(info, mask, mask);
+}
+
 #ifdef CONFIG_ATH79_ROUTERBOOT
 const struct rb_info *rb_init_info(void *data, unsigned int size);
 void *rb_get_wlan_data(void);
-- 
2.14.3