[LEDE-DEV] [PATCH v3] ar71xx: add ew-balin platform from Embedded Wireless
Catrinel Catrinescu
cc at 80211.de
Thu Jan 11 02:27:39 PST 2018
Add the Embedded Wireless "Balin" platform, based on AR9344:
http://www.embeddedwireless.de/uploads/Balin_data_2016_10.pdf
The module comes already with the current vanilla OpenWRT firmware,
so no need to install "factory"-image, or any other stuff:-)
Signed-off-by: Catrinel Catrinescu <cc at 80211.de>
---
.../linux/ar71xx/base-files/etc/board.d/02_network | 6 ++
target/linux/ar71xx/base-files/etc/diag.sh | 3 +
.../etc/uci-defaults/03_network-switchX-migration | 1 +
target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 +
.../ar71xx/base-files/lib/upgrade/platform.sh | 1 +
target/linux/ar71xx/config-4.4 | 1 +
target/linux/ar71xx/config-4.9 | 1 +
.../ar71xx/files/arch/mips/ath79/Kconfig.openwrt | 11 ++
target/linux/ar71xx/files/arch/mips/ath79/Makefile | 1 +
.../ar71xx/files/arch/mips/ath79/mach-ew-balin.c | 112 +++++++++++++++++++++
.../linux/ar71xx/files/arch/mips/ath79/machtypes.h | 1 +
target/linux/ar71xx/image/generic.mk | 9 ++
target/linux/ar71xx/mikrotik/config-default | 1 +
target/linux/ar71xx/nand/config-default | 1 +
14 files changed, 152 insertions(+)
create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-ew-balin.c
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index fb61792bf4..4919e7c983 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -368,6 +368,12 @@ ar71xx_setup_interfaces()
ucidef_add_switch "switch0" \
"0 at eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
;;
+ ew-balin)
+ ucidef_set_interface_raw "usb2" "usb0" "static"
+ ucidef_set_interface_raw "usb3" "usb0" "static"
+ ucidef_add_switch "switch0" \
+ "0 at eth0" "5:lan:4" "4:lan:5" "3:wan"
+ ;;
ew-dorin)
ucidef_add_switch "switch0" \
"0 at eth0" "1:lan" "2:lan" "3:wan"
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index 6cbb3576d8..ca73d5f62b 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -193,6 +193,9 @@ get_status_led() {
el-mini)
status_led="easylink:green:system"
;;
+ ew-balin)
+ status_led="balin:green:status"
+ ;;
ew-dorin|\
ew-dorin-router)
status_led="dorin:green:status"
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration b/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration
index 29fdde40a0..898082f552 100644
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration
@@ -53,6 +53,7 @@ dir-615-e1|\
dir-615-e4|\
dir-825-c1|\
ebr-2310-c1|\
+ew-balin|\
ew-dorin|\
ew-dorin-router|\
ja76pf|\
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index b5440230a5..162742a94c 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -640,6 +640,9 @@ ar71xx_board_detect() {
*"EL-MINI")
name="el-mini"
;;
+ *EmbWir-Balin)
+ name="ew-balin"
+ ;;
*"EmbWir-Dorin")
name="ew-dorin"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index ecf6820a2b..9dceadc563 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -237,6 +237,7 @@ platform_check_image() {
epg5000|\
esr1750|\
esr900|\
+ ew-balin|\
ew-dorin|\
ew-dorin-router|\
gl-ar150|\
diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4
index 5a8004a03e..36b266f21c 100644
--- a/target/linux/ar71xx/config-4.4
+++ b/target/linux/ar71xx/config-4.4
@@ -109,6 +109,7 @@ CONFIG_ATH79_MACH_ENS202EXT=y
CONFIG_ATH79_MACH_EPG5000=y
CONFIG_ATH79_MACH_ESR1750=y
CONFIG_ATH79_MACH_ESR900=y
+CONFIG_ATH79_MACH_EW_BALIN=y
CONFIG_ATH79_MACH_EW_DORIN=y
CONFIG_ATH79_MACH_F9K1115V2=y
CONFIG_ATH79_MACH_FRITZ300E=y
diff --git a/target/linux/ar71xx/config-4.9 b/target/linux/ar71xx/config-4.9
index 4334d25b80..d51fe5f797 100644
--- a/target/linux/ar71xx/config-4.9
+++ b/target/linux/ar71xx/config-4.9
@@ -107,6 +107,7 @@ CONFIG_ATH79_MACH_ENS202EXT=y
CONFIG_ATH79_MACH_EPG5000=y
CONFIG_ATH79_MACH_ESR1750=y
CONFIG_ATH79_MACH_ESR900=y
+CONFIG_ATH79_MACH_EW_BALIN=y
CONFIG_ATH79_MACH_EW_DORIN=y
CONFIG_ATH79_MACH_F9K1115V2=y
CONFIG_ATH79_MACH_FRITZ300E=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index 1198fcb74b..a94c5a3a2e 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -702,6 +702,17 @@ config ATH79_MACH_ESR900
select ATH79_DEV_WMAC
select ATH79_NVRAM
+config ATH79_MACH_EW_BALIN
+ bool "embedded wireless Balin Platform support"
+ select SOC_AR934X
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_WMAC
+ select ATH79_DEV_ETH
+ select ATH79_DEV_USB
+ select ATH79_DEV_AP9X_PCI if PCI
+
config ATH79_MACH_EW_DORIN
bool "embedded wireless Dorin Platform support"
select SOC_AR933X
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index 455af762e3..bde1b75308 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -115,6 +115,7 @@ obj-$(CONFIG_ATH79_MACH_ENS202EXT) += mach-ens202ext.o
obj-$(CONFIG_ATH79_MACH_EPG5000) += mach-epg5000.o
obj-$(CONFIG_ATH79_MACH_ESR1750) += mach-esr1750.o
obj-$(CONFIG_ATH79_MACH_ESR900) += mach-esr900.o
+obj-$(CONFIG_ATH79_MACH_EW_BALIN) += mach-ew-balin.o
obj-$(CONFIG_ATH79_MACH_EW_DORIN) += mach-ew-dorin.o
obj-$(CONFIG_ATH79_MACH_F9K1115V2) += mach-f9k1115v2.o
obj-$(CONFIG_ATH79_MACH_FRITZ300E) += mach-fritz300e.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ew-balin.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ew-balin.c
new file mode 100644
index 0000000000..7d7f38c1d2
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-ew-balin.c
@@ -0,0 +1,112 @@
+/*
+ * EW Balin board support
+ * (based on Atheros DB120 reference board support)
+ *
+ * Copyright (c) 2011 Qualcomm Atheros
+ * Copyright (c) 2011-2012 Gabor Juhos <juhosg at openwrt.org>
+ * Copyright (C) 2017 Embedded Wireless GmbH www.80211.de
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define BALIN_GPIO_LED_STATUS 14
+
+#define BALIN_GPIO_BTN_WPS 18
+
+#define BALIN_KEYS_POLL_INTERVAL 20 /* msecs */
+#define BALIN_KEYS_DEBOUNCE_INTERVAL (3 * BALIN_KEYS_POLL_INTERVAL)
+
+#define BALIN_CALDATA_OFFSET 0x1000
+#define BALIN_WMAC_MAC_OFFSET (BALIN_CALDATA_OFFSET + 0x02)
+
+static struct gpio_led balin_leds_gpio[] __initdata = {
+ {
+ .name = "balin:green:status",
+ .gpio = BALIN_GPIO_LED_STATUS,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button balin_gpio_keys[] __initdata = {
+ {
+ .desc = "WPS button",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = BALIN_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = BALIN_GPIO_BTN_WPS,
+ .active_low = 0,
+ },
+};
+
+
+static void __init balin_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+ static u8 mac[6];
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(balin_leds_gpio),
+ balin_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, BALIN_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(balin_gpio_keys),
+ balin_gpio_keys);
+
+ ath79_register_usb();
+
+
+ ath79_register_wmac(art + BALIN_CALDATA_OFFSET,
+ art + BALIN_WMAC_MAC_OFFSET);
+
+ ath79_register_pci();
+
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
+ AR934X_ETH_CFG_SW_ONLY_MODE);
+
+ ath79_register_mdio(1, 0x0);
+
+ /* GMAC1 is connected to the internal switch */
+ memcpy(mac, art + BALIN_WMAC_MAC_OFFSET, sizeof(mac));
+ mac[3] |= 0x40;
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+
+ ath79_register_eth(1);
+}
+
+MIPS_MACHINE(ATH79_MACH_EW_BALIN, "EW-BALIN", "EmbWir-Balin",
+ balin_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index 0f536f0ec5..ca684b4209 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -106,6 +106,7 @@ enum ath79_mach_type {
ATH79_MACH_EPG5000, /* EnGenius EPG5000 */
ATH79_MACH_ESR1750, /* EnGenius ESR1750 */
ATH79_MACH_ESR900, /* EnGenius ESR900 */
+ ATH79_MACH_EW_BALIN, /* embedded wireless Balin Platform */
ATH79_MACH_EW_DORIN, /* embedded wireless Dorin Platform */
ATH79_MACH_EW_DORIN_ROUTER, /* embedded wireless Dorin Router Platform */
ATH79_MACH_F9K1115V2, /* Belkin AC1750DB */
diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk
index 6829f113a7..9e9f747803 100644
--- a/target/linux/ar71xx/image/generic.mk
+++ b/target/linux/ar71xx/image/generic.mk
@@ -229,6 +229,15 @@ define Device/dragino2
endef
TARGET_DEVICES += dragino2
+define Device/ew-balin
+ DEVICE_TITLE := Embedded Wireless Balin Platform
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb-chipidea
+ BOARDNAME = EW-BALIN
+ IMAGE_SIZE = 16000k
+ MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
+endef
+TARGET_DEVICES += ew-balin
+
define Device/ew-dorin
DEVICE_TITLE := Embedded Wireless Dorin Platform
DEVICE_PACKAGES := kmod-usb-core kmod-usb-chipidea
diff --git a/target/linux/ar71xx/mikrotik/config-default b/target/linux/ar71xx/mikrotik/config-default
index a77813d23d..ffa07bd3dd 100644
--- a/target/linux/ar71xx/mikrotik/config-default
+++ b/target/linux/ar71xx/mikrotik/config-default
@@ -73,6 +73,7 @@
# CONFIG_ATH79_MACH_EPG5000 is not set
# CONFIG_ATH79_MACH_ESR1750 is not set
# CONFIG_ATH79_MACH_ESR900 is not set
+# CONFIG_ATH79_MACH_EW_BALIN is not set
# CONFIG_ATH79_MACH_EW_DORIN is not set
# CONFIG_ATH79_MACH_F9K1115V2 is not set
# CONFIG_ATH79_MACH_FRITZ300E is not set
diff --git a/target/linux/ar71xx/nand/config-default b/target/linux/ar71xx/nand/config-default
index d85a21d91a..18d56c1f80 100644
--- a/target/linux/ar71xx/nand/config-default
+++ b/target/linux/ar71xx/nand/config-default
@@ -74,6 +74,7 @@ CONFIG_ATH79_MACH_DOMYWIFI_DW33D=y
# CONFIG_ATH79_MACH_EPG5000 is not set
# CONFIG_ATH79_MACH_ESR1750 is not set
# CONFIG_ATH79_MACH_ESR900 is not set
+# CONFIG_ATH79_MACH_EW_BALIN is not set
# CONFIG_ATH79_MACH_EW_DORIN is not set
# CONFIG_ATH79_MACH_F9K1115V2 is not set
# CONFIG_ATH79_MACH_FRITZ300E is not set
--
2.14.3 (Apple Git-98)
More information about the Lede-dev
mailing list