[LEDE-DEV] [PATCH] layerscape: activate fpu feature

[Hauke Mehrtens]

On 01/03/2018 04:21 AM, Y.b. Lu wrote:
> Hi Hauke,
> 
> The layerscape maintainer info should be no problem. You just sent wrong email address to me. (cyangbo.lu at nxp.com)
> MAINTAINER:=Yangbo Lu <yangbo.lu at nxp.com>

Will you send a patch to update the Maintainer?

> I will cherry-pick this patch to our internal LEDE git tree. Test team will test all devices, and we will have a release on our github by end of January.
> https://github.com/qoriq-open-source/LEDE-source

John already merged this patch, see here:
https://git.lede-project.org/?p=openwrt/openwrt.git;a=commitdiff;h=597de6904c39e02a8aa008f50ff19c6793117194

Mathew McBride also tested this on his LS1043 board and did not notice
any problems.

Hauke

> 
> I will send related patches to community after release.
> Thanks a lot.
> 
> 
> Best regards,
> Yangbo Lu
> 
> 
>> -----Original Message-----
>> From: Hauke Mehrtens [mailto:hauke at hauke-m.de]
>> Sent: 2018年1月2日 0:04
>> To: lede-dev at lists.infradead.org; Y.b. Lu <yangbo.lu at nxp.com>
>> Subject: Re: [PATCH] layerscape: activate fpu feature
>>
>> Hi Yangbo Lu,
>>
>> Can you please test this patch on your hardware.
>>
>>
>> I send a mail to yangbo.lu at nxp.com who is listed as the current layerscape
>> maintainer, but it was rejected by your mail server:
>>
>> <cyangbo.lu at nxp.com>: host
>> nxp-com.mail.protection.outlook.com[213.199.154.170] said: 550 5.4.1
>> [cyangbo.lu at nxp.com]: Recipient address rejected: Access denied
>> [DB5EUR01FT058.eop-EUR01.prod.protection.outlook.com] (in reply to RCPT
>> TO command)
>>
>> Are you the current maintainer? If so can you please send a patch to fix this
>> please.
>>
>> Hauke
>>
>>
>> On 01/01/2018 04:58 PM, Hauke Mehrtens wrote:
>>> The CPU sub type was set to a CPU version with FPU, but the FPU
>>> feature was not activated before, so a soft float toolchain was created.
>>> Activate also the FPU feature to create the correct toolchain.
>>>
>>> Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
>>> ---
>>>
>>> This probably fixes a problem, but I do not have any layerscape
>>> hardware, could someone please test this on real hardware and report
>>> back if it still works.
>>>
>>> A complete rebuild incl. toolchain is needed.
>>>
>>>  target/linux/layerscape/Makefile | 2 +-
>>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>>
>>> diff --git a/target/linux/layerscape/Makefile
>>> b/target/linux/layerscape/Makefile
>>> index 67da8449aa..bd91556ef4 100644
>>> --- a/target/linux/layerscape/Makefile
>>> +++ b/target/linux/layerscape/Makefile
>>> @@ -10,7 +10,7 @@ BOARD:=layerscape
>>>  BOARDNAME:=NXP Layerscape
>>>  DEVICE_TYPE:=developerboard
>>>  KERNEL_PATCHVER:=4.9
>>> -FEATURES:=squashfs nand usb pcie gpio
>>> +FEATURES:=squashfs nand usb pcie gpio fpu
>>>  SUBTARGETS:=armv8_64b armv8_32b
>>>  MAINTAINER:=Yangbo Lu <yangbo.lu at nxp.com>
>>>
>>>
>