[LEDE-DEV] [PATCH 1/4] mac80211: update to backports-4.14-rc1
Hauke Mehrtens
hauke at hauke-m.de
Sun Sep 17 11:39:29 PDT 2017
This updates mac80211 to backprots-4.14-rc1.
This was only compile tested and runtime tested with ath9k and ath10k
with multiple stations and ieee80211w.
To create the backports-4.14-rc1.tar.xz use this repository:
https://git.kernel.org/pub/scm/linux/kernel/git/backports/backports.git
Then run this:
./gentree.py --refresh --git-revision v4.14-rc1 --clean /home/hauke/linux/linux-next-clean/ ../backports-4.14-rc1
Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
---
package/kernel/mac80211/Makefile | 22 +-
.../kernel/mac80211/patches/001-fix_build.patch | 10 +-
.../mac80211/patches/002-change_allconfig.patch | 6 +-
.../patches/004-kconfig_backport_fix.patch | 2 +-
.../mac80211/patches/005-revert-devcoredump.patch | 143 +-
.../patches/006-revert-ktime-changes.patch | 20 -
.../patches/007-revert-genetlink-changes.patch | 266 ---
.../patches/008-revert-ndo_stats64-cleanup.patch | 20 -
.../mac80211/patches/009-revert-mtu-changes.patch | 338 ----
.../mac80211/patches/010-disable_rfkill.patch | 2 +-
.../mac80211/patches/011-backport_strscpy.patch | 43 -
.../013-backport-dev_coredumpm-function.patch | 156 --
.../kernel/mac80211/patches/015-ipw200-mtu.patch | 34 +
...d-introducing-a-USB-dependency-in-the-rt2.patch | 78 -
...2-rt2x00usb-do-not-anchor-rx-and-tx-urb-s.patch | 56 -
...20-03-rt2x00usb-fix-anchor-initialization.patch | 70 -
.../020-04-rt61pci-use-entry-directly.patch | 23 -
...-call-entry-directly-in-rt2x00_dump_frame.patch | 158 --
...06-rt2x00-remove-queue_entry-from-skbdesc.patch | 52 -
...sb-don-t-mark-register-accesses-as-inline.patch | 79 -
...00lib-move-rt2800_drv_data-declaration-in.patch | 87 -
...800-identify-station-based-on-status-WCID.patch | 85 -
...rte-filling-tx-status-from-rt2x00lib_txdo.patch | 173 --
...arte-clearing-entry-from-rt2x00lib_txdone.patch | 83 -
...020-12-rt2x00-add-txdone-nomatch-function.patch | 85 -
...x00-fixup-fill_tx_status-for-nomatch-case.patch | 47 -
...14-rt2x00-use-txdone_nomatch-on-rt2800usb.patch | 180 --
...-status-based-rate-flags-for-nomatch-case.patch | 81 -
...-rt2800-use-TXOP_BACKOFF-for-probe-frames.patch | 38 -
...rt2x00-fix-rt2x00debug_dump_frame-comment.patch | 23 -
...2x00-fix-TX_PWR_CFG_4-register-definition.patch | 32 -
.../020-19-rt2x00-add-support-for-MT7620.patch | 2064 --------------------
...reverse-external-PA-capability-flag-logic.patch | 121 --
...rt2800-fix-LNA-gain-assignment-for-MT7620.patch | 49 -
...-do-VCO-calibration-after-programming-ALC.patch | 29 -
...2800-fix-mt7620-vco-calibration-registers.patch | 45 -
...24-rt2800-fix-mt7620-E2-channel-registers.patch | 36 -
.../mac80211/patches/060-no_local_ssb_bcma.patch | 22 +-
.../patches/080-ath10k_thermal_config.patch | 2 +-
.../kernel/mac80211/patches/090-remove-cred.patch | 15 -
.../100-remove-cryptoapi-dependencies.patch | 22 +-
.../110-mac80211_keep_keys_on_stop_ap.patch | 2 +-
.../patches/130-mac80211-hwsim-hrtimer-clock.patch | 11 -
.../patches/150-disable_addr_notifier.patch | 10 +-
package/kernel/mac80211/patches/210-ap_scan.patch | 2 +-
...04-ath9k-force-rx_clear-when-disabling-rx.patch | 2 +-
...mit-retries-for-powersave-response-frames.patch | 12 +-
...k-interpret-requested-txpower-in-EIRP-dom.patch | 4 +-
...-mac80211-add-hdrlen-to-ieee80211_tx_data.patch | 30 +-
...8-mac80211-add-NEED_ALIGNED4_SKBS-hw-flag.patch | 32 +-
...nstrel-Enable-STBC-and-LDPC-for-VHT-Rates.patch | 2 +-
...moredata-bit-in-PS-buffered-frame-release.patch | 6 +-
...-potentially-stale-EOSP-status-bit-in-int.patch | 2 +-
...th9k-fix-block-ack-window-tracking-issues.patch | 6 +-
...-rename-tx_complete_work-to-hw_check_work.patch | 175 --
...9k_hw-check-if-the-chip-failed-to-wake-up.patch | 30 -
...race-condition-in-enabling-disabling-IRQs.patch | 197 --
...eck-brcmf_bus_get_memdump-result-for-erro.patch | 52 -
...be-more-verbose-when-PSM-s-watchdog-fires.patch | 38 -
...e-wiphy_read_of_freq_limits-to-respect-li.patch | 44 -
...mfmac-merge-two-brcmf_err-macros-into-one.patch | 43 -
...itch-to-C-function-__brcmf_err-for-printi.patch | 69 -
...fmac-merge-two-remaining-brcmf_err-macros.patch | 46 -
...h9k-clean-up-and-fix-ath_tx_count_airtime.patch | 107 -
.../321-mac80211-fix-CSA-in-IBSS-mode.patch | 34 -
...n-t-handle-filtered-frames-within-a-BA-se.patch | 28 -
...e-net_device_stats-from-struct-net_device.patch | 112 --
...ways-print-error-when-PSM-s-watchdog-fire.patch | 148 --
...-not-print-the-firmware-version-as-an-err.patch | 56 -
...mac-Do-not-complain-about-country-code-00.patch | 28 -
...ndle-status-BRCMF_E_STATUS_ABORT-in-cfg80.patch | 35 -
...fmac-move-brcmf_txflowblock-to-bcdc-layer.patch | 137 --
...mfmac-move-brcmf_txcomplete-to-bcdc-layer.patch | 122 --
...ap-brcmf_fws_add_interface-into-bcdc-laye.patch | 95 -
...ap-brcmf_fws_del_interface-into-bcdc-laye.patch | 83 -
...ap-brcmf_fws_reset_interface-into-bcdc-la.patch | 82 -
...conditionally-start-new-netdev-queues-wit.patch | 29 -
.../patches/326-ath9k-fix-ar934x-OTP-offsets.patch | 42 -
.../patches/327-ath10k-increase-BMI-timeout.patch | 31 -
...28-ath10k-log-when-longer-bmi-cmds-happen.patch | 74 -
...BMI-parameters-to-fix-calibration-from-DT.patch | 80 -
...t-disable-wake_tx_queue-for-older-devices.patch | 2 +-
.../mac80211/patches/402-ath_regd_optional.patch | 18 +-
.../mac80211/patches/404-regd_no_assoc_hints.patch | 4 +-
.../patches/406-ath_relax_default_regd.patch | 2 +-
.../patches/440-ath5k_channel_bw_debugfs.patch | 2 +-
.../patches/500-ath9k_eeprom_debugfs.patch | 4 +-
.../mac80211/patches/501-ath9k_ahb_init.patch | 2 +-
.../patches/512-ath9k_channelbw_debugfs.patch | 10 +-
.../mac80211/patches/513-ath9k_add_pci_ids.patch | 2 +-
.../522-mac80211_configure_antenna_gain.patch | 38 +-
.../mac80211/patches/530-ath9k_extra_leds.patch | 6 +-
.../mac80211/patches/542-ath9k_debugfs_diag.patch | 10 +-
.../patches/543-ath9k_entropy_from_adc.patch | 10 +-
.../patches/551-ath9k_ubnt_uap_plus_hsr.patch | 6 +-
...t2x00-rt2800lib-enable-support-for-RT3883.patch | 2 +-
...3-rt2x00-rt2800lib-add-rf_vals-for-RF3853.patch | 6 +-
...2800lib-enable-VCO-calibration-for-RF3853.patch | 4 +-
...00lib-add-channel-configuration-function-.patch | 22 +-
...06-rt2x00-rt2800lib-enable-RF3853-support.patch | 2 +-
...00lib-add-MAC-register-initialization-for.patch | 6 +-
...00lib-add-BBP-register-initialization-for.patch | 4 +-
...00lib-add-RFCSR-initialization-for-RT3883.patch | 16 +-
...00lib-use-the-extended-EEPROM-map-for-RT3.patch | 2 +-
...2800lib-force-rf-type-to-RF3853-on-RT3883.patch | 4 +-
...00lib-add-channel-configuration-code-for-.patch | 12 +-
...00lib-fix-txpower_to_dev-function-for-RT3.patch | 2 +-
...00lib-use-correct-txpower-calculation-fun.patch | 2 +-
...00lib-hardcode-txmixer-gain-values-to-zer.patch | 8 +-
...800lib-use-correct-RT-XWI-size-for-RT3883.patch | 2 +-
...00lib-fix-antenna-configuration-for-RT388.patch | 2 +-
...00lib-fix-LNA-gain-configuration-for-RT38.patch | 10 +-
...rt2x00-rt2800lib-fix-VGC-setup-for-RT3883.patch | 6 +-
...00lib-fix-EEPROM-LNA-validation-for-RT388.patch | 12 +-
...00lib-fix-txpower-compensation-for-RT3883.patch | 2 +-
...00mmio-add-a-workaround-for-spurious-TX_F.patch | 14 +-
.../602-rt2x00-introduce-rt2x00eeprom.patch | 16 +-
...low_disabling_bands_through_platform_data.patch | 2 +-
.../607-rt2x00-add_platform_data_mac_addr.patch | 2 +-
...-rt2x00-allow_disabling_bands_through_dts.patch | 2 +-
.../610-rt2x00-change-led-polarity-from-OF.patch | 2 +-
.../patches/611-rt2x00-add-AP+STA-support.patch | 2 +-
...x00-add-support-for-external-PA-on-MT7620.patch | 16 +-
.../651-rt2x00-remove-unneccesary-code.patch | 2 +-
...Add-initial-code-to-detect-8188eu-devices.patch | 2 +-
...tl8xxxu-Add-rtl8188etv-to-USB-device-list.patch | 2 +-
...xxu-Add-sitecom-dongle-to-USB-device-list.patch | 2 +-
...d-rtl8188eu-USB-ID-for-D-Link-USB-GO-N150.patch | 2 +-
.../801-libertas-configure-sysfs-links.patch | 6 +-
.../802-libertas-set-wireless-macaddr.patch | 2 +-
.../patches/810-b43-gpio-mask-module-option.patch | 6 +-
.../kernel/mac80211/patches/811-b43_no_pio.patch | 2 +-
.../patches/812-b43-add-antenna-control.patch | 18 +-
.../814-b43-only-use-gpio-0-1-for-led.patch | 2 +-
.../815-b43-always-take-overlapping-devs.patch | 2 +-
...mfmac-register-wiphy-s-during-module_init.patch | 27 +-
...rkaround-bug-with-some-inconsistent-BSSes.patch | 4 +-
.../862-brcmfmac-Disable-power-management.patch | 2 +-
.../921-ath10k_init_devices_synchronously.patch | 2 +-
.../patches/930-ath10k_add_tpt_led_trigger.patch | 8 +-
.../936-ath10k-fix-otp-failure-result.patch | 2 +-
.../940-mwl8k_init_devices_synchronously.patch | 4 +-
.../960-0010-ath10k-limit-htt-rx-ring-size.patch | 2 +-
143 files changed, 328 insertions(+), 7104 deletions(-)
delete mode 100644 package/kernel/mac80211/patches/006-revert-ktime-changes.patch
delete mode 100644 package/kernel/mac80211/patches/007-revert-genetlink-changes.patch
delete mode 100644 package/kernel/mac80211/patches/008-revert-ndo_stats64-cleanup.patch
delete mode 100644 package/kernel/mac80211/patches/009-revert-mtu-changes.patch
delete mode 100644 package/kernel/mac80211/patches/011-backport_strscpy.patch
delete mode 100644 package/kernel/mac80211/patches/013-backport-dev_coredumpm-function.patch
create mode 100644 package/kernel/mac80211/patches/015-ipw200-mtu.patch
delete mode 100644 package/kernel/mac80211/patches/020-01-rt2x00-avoid-introducing-a-USB-dependency-in-the-rt2.patch
delete mode 100644 package/kernel/mac80211/patches/020-02-rt2x00usb-do-not-anchor-rx-and-tx-urb-s.patch
delete mode 100644 package/kernel/mac80211/patches/020-03-rt2x00usb-fix-anchor-initialization.patch
delete mode 100644 package/kernel/mac80211/patches/020-04-rt61pci-use-entry-directly.patch
delete mode 100644 package/kernel/mac80211/patches/020-05-rt2x00-call-entry-directly-in-rt2x00_dump_frame.patch
delete mode 100644 package/kernel/mac80211/patches/020-06-rt2x00-remove-queue_entry-from-skbdesc.patch
delete mode 100644 package/kernel/mac80211/patches/020-07-rt2500usb-don-t-mark-register-accesses-as-inline.patch
delete mode 100644 package/kernel/mac80211/patches/020-08-rt2x00-rt2800lib-move-rt2800_drv_data-declaration-in.patch
delete mode 100644 package/kernel/mac80211/patches/020-09-rt2800-identify-station-based-on-status-WCID.patch
delete mode 100644 package/kernel/mac80211/patches/020-10-rt2x00-separte-filling-tx-status-from-rt2x00lib_txdo.patch
delete mode 100644 package/kernel/mac80211/patches/020-11-rt2x00-separte-clearing-entry-from-rt2x00lib_txdone.patch
delete mode 100644 package/kernel/mac80211/patches/020-12-rt2x00-add-txdone-nomatch-function.patch
delete mode 100644 package/kernel/mac80211/patches/020-13-rt2x00-fixup-fill_tx_status-for-nomatch-case.patch
delete mode 100644 package/kernel/mac80211/patches/020-14-rt2x00-use-txdone_nomatch-on-rt2800usb.patch
delete mode 100644 package/kernel/mac80211/patches/020-15-rt2800-status-based-rate-flags-for-nomatch-case.patch
delete mode 100644 package/kernel/mac80211/patches/020-16-rt2800-use-TXOP_BACKOFF-for-probe-frames.patch
delete mode 100644 package/kernel/mac80211/patches/020-17-rt2x00-fix-rt2x00debug_dump_frame-comment.patch
delete mode 100644 package/kernel/mac80211/patches/020-18-rt2x00-fix-TX_PWR_CFG_4-register-definition.patch
delete mode 100644 package/kernel/mac80211/patches/020-19-rt2x00-add-support-for-MT7620.patch
delete mode 100644 package/kernel/mac80211/patches/020-20-rt2x00-reverse-external-PA-capability-flag-logic.patch
delete mode 100644 package/kernel/mac80211/patches/020-21-rt2800-fix-LNA-gain-assignment-for-MT7620.patch
delete mode 100644 package/kernel/mac80211/patches/020-22-rt2800-do-VCO-calibration-after-programming-ALC.patch
delete mode 100644 package/kernel/mac80211/patches/020-23-rt2800-fix-mt7620-vco-calibration-registers.patch
delete mode 100644 package/kernel/mac80211/patches/020-24-rt2800-fix-mt7620-E2-channel-registers.patch
delete mode 100644 package/kernel/mac80211/patches/090-remove-cred.patch
delete mode 100644 package/kernel/mac80211/patches/130-mac80211-hwsim-hrtimer-clock.patch
delete mode 100644 package/kernel/mac80211/patches/314-ath9k-rename-tx_complete_work-to-hw_check_work.patch
delete mode 100644 package/kernel/mac80211/patches/315-ath9k_hw-check-if-the-chip-failed-to-wake-up.patch
delete mode 100644 package/kernel/mac80211/patches/316-ath9k-fix-race-condition-in-enabling-disabling-IRQs.patch
delete mode 100644 package/kernel/mac80211/patches/318-0001-brcmfmac-check-brcmf_bus_get_memdump-result-for-erro.patch
delete mode 100644 package/kernel/mac80211/patches/319-0002-brcmfmac-be-more-verbose-when-PSM-s-watchdog-fires.patch
delete mode 100644 package/kernel/mac80211/patches/319-0003-brcmfmac-use-wiphy_read_of_freq_limits-to-respect-li.patch
delete mode 100644 package/kernel/mac80211/patches/319-0004-brcmfmac-merge-two-brcmf_err-macros-into-one.patch
delete mode 100644 package/kernel/mac80211/patches/319-0005-brcmfmac-switch-to-C-function-__brcmf_err-for-printi.patch
delete mode 100644 package/kernel/mac80211/patches/319-0006-brcmfmac-merge-two-remaining-brcmf_err-macros.patch
delete mode 100644 package/kernel/mac80211/patches/320-ath9k-clean-up-and-fix-ath_tx_count_airtime.patch
delete mode 100644 package/kernel/mac80211/patches/321-mac80211-fix-CSA-in-IBSS-mode.patch
delete mode 100644 package/kernel/mac80211/patches/322-mac80211-don-t-handle-filtered-frames-within-a-BA-se.patch
delete mode 100644 package/kernel/mac80211/patches/323-0001-brcmfmac-Use-net_device_stats-from-struct-net_device.patch
delete mode 100644 package/kernel/mac80211/patches/323-0002-brcmfmac-always-print-error-when-PSM-s-watchdog-fire.patch
delete mode 100644 package/kernel/mac80211/patches/323-0003-brcmfmac-Do-not-print-the-firmware-version-as-an-err.patch
delete mode 100644 package/kernel/mac80211/patches/323-0004-brcmfmac-Do-not-complain-about-country-code-00.patch
delete mode 100644 package/kernel/mac80211/patches/323-0005-brcmfmac-Handle-status-BRCMF_E_STATUS_ABORT-in-cfg80.patch
delete mode 100644 package/kernel/mac80211/patches/323-0006-brcmfmac-move-brcmf_txflowblock-to-bcdc-layer.patch
delete mode 100644 package/kernel/mac80211/patches/323-0007-brcmfmac-move-brcmf_txcomplete-to-bcdc-layer.patch
delete mode 100644 package/kernel/mac80211/patches/323-0008-brcmfmac-wrap-brcmf_fws_add_interface-into-bcdc-laye.patch
delete mode 100644 package/kernel/mac80211/patches/323-0009-brcmfmac-wrap-brcmf_fws_del_interface-into-bcdc-laye.patch
delete mode 100644 package/kernel/mac80211/patches/323-0010-brcmfmac-wrap-brcmf_fws_reset_interface-into-bcdc-la.patch
delete mode 100644 package/kernel/mac80211/patches/325-mac80211-unconditionally-start-new-netdev-queues-wit.patch
delete mode 100644 package/kernel/mac80211/patches/326-ath9k-fix-ar934x-OTP-offsets.patch
delete mode 100644 package/kernel/mac80211/patches/327-ath10k-increase-BMI-timeout.patch
delete mode 100644 package/kernel/mac80211/patches/328-ath10k-log-when-longer-bmi-cmds-happen.patch
delete mode 100644 package/kernel/mac80211/patches/329-ath10k-add-BMI-parameters-to-fix-calibration-from-DT.patch
diff --git a/package/kernel/mac80211/Makefile b/package/kernel/mac80211/Makefile
index dfe9781be2..0c9849811b 100644
--- a/package/kernel/mac80211/Makefile
+++ b/package/kernel/mac80211/Makefile
@@ -10,14 +10,14 @@ include $(INCLUDE_DIR)/kernel.mk
PKG_NAME:=mac80211
-PKG_VERSION:=2017-01-31
-PKG_RELEASE:=3
-PKG_SOURCE_URL:=http://mirror2.openwrt.org/sources
+PKG_VERSION:=4.14-rc1
+PKG_RELEASE:=1
+PKG_SOURCE_URL:=https://www.hauke-m.de/files
PKG_BACKPORT_VERSION:=
-PKG_HASH:=75e6d39e34cf156212a2509172a4a62b673b69eb4a1d9aaa565f7fa719fa2317
+PKG_HASH:=171b8b93caa63a14ab3118610ac001df5476eefeae2ddb54085ab38a56162ebd
-PKG_SOURCE:=compat-wireless-$(PKG_VERSION)$(PKG_BACKPORT_VERSION).tar.xz
-PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/compat-wireless-$(PKG_VERSION)
+PKG_SOURCE:=backports-$(PKG_VERSION)$(PKG_BACKPORT_VERSION).tar.xz
+PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/backports-$(PKG_VERSION)
PKG_BUILD_PARALLEL:=1
PKG_MAINTAINER:=Felix Fietkau <nbd at nbd.name>
@@ -101,7 +101,7 @@ endef
define KernelPackage/mac80211
$(call KernelPackage/mac80211/Default)
TITLE:=Linux 802.11 Wireless Networking Stack
- DEPENDS+= +kmod-cfg80211 +hostapd-common
+ DEPENDS+= +kmod-cfg80211 +kmod-crypto-hash +kmod-crypto-cmac +hostapd-common
KCONFIG:=\
CONFIG_AVERAGE=y
FILES:= $(PKG_BUILD_DIR)/net/mac80211/mac80211.ko
@@ -929,7 +929,7 @@ endef
define KernelPackage/libipw
$(call KernelPackage/mac80211/Default)
TITLE:=libipw for ipw2100 and ipw2200
- DEPENDS:=@PCI_SUPPORT +kmod-crypto-michael-mic +kmod-lib80211 +kmod-cfg80211 + at DRIVER_WEXT_SUPPORT @!BIG_ENDIAN
+ DEPENDS:=@PCI_SUPPORT +kmod-crypto-michael-mic +kmod-crypto-ecb +kmod-lib80211 +kmod-cfg80211 + at DRIVER_WEXT_SUPPORT @!BIG_ENDIAN @!LINUX_3_18
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intel/ipw2x00/libipw.ko
AUTOLOAD:=$(call AutoProbe,libipw)
endef
@@ -989,7 +989,7 @@ endef
define KernelPackage/libertas-usb
$(call KernelPackage/mac80211/Default)
- DEPENDS+= @USB_SUPPORT +kmod-cfg80211 +kmod-usb-core +kmod-lib80211 + at DRIVER_WEXT_SUPPORT +libertas-usb-firmware
+ DEPENDS+= @USB_SUPPORT +kmod-cfg80211 +kmod-usb-core +kmod-lib80211 + at DRIVER_WEXT_SUPPORT +libertas-usb-firmware @!LINUX_3_18
TITLE:=Marvell 88W8015 Wireless Driver
FILES:= \
$(PKG_BUILD_DIR)/drivers/net/wireless/marvell/libertas/libertas.ko \
@@ -999,7 +999,7 @@ endef
define KernelPackage/libertas-sdio
$(call KernelPackage/mac80211/Default)
- DEPENDS+= +kmod-cfg80211 +kmod-lib80211 +kmod-mmc + at DRIVER_WEXT_SUPPORT @!TARGET_uml +libertas-sdio-firmware
+ DEPENDS+= +kmod-cfg80211 +kmod-lib80211 +kmod-mmc + at DRIVER_WEXT_SUPPORT @!TARGET_uml +libertas-sdio-firmware @!LINUX_3_18
TITLE:=Marvell 88W8686 Wireless Driver
FILES:= \
$(PKG_BUILD_DIR)/drivers/net/wireless/marvell/libertas/libertas.ko \
@@ -1010,7 +1010,7 @@ endef
define KernelPackage/libertas-spi
$(call KernelPackage/mac80211/Default)
SUBMENU:=Wireless Drivers
- DEPENDS+= +kmod-cfg80211 +kmod-lib80211 + at DRIVER_WEXT_SUPPORT @!TARGET_uml +libertas-spi-firmware
+ DEPENDS+= +kmod-cfg80211 +kmod-lib80211 + at DRIVER_WEXT_SUPPORT @!TARGET_uml +libertas-spi-firmware @!LINUX_3_18
KCONFIG := \
CONFIG_SPI=y \
CONFIG_SPI_MASTER=y
diff --git a/package/kernel/mac80211/patches/001-fix_build.patch b/package/kernel/mac80211/patches/001-fix_build.patch
index 402649d2cc..9e272e90af 100644
--- a/package/kernel/mac80211/patches/001-fix_build.patch
+++ b/package/kernel/mac80211/patches/001-fix_build.patch
@@ -24,7 +24,7 @@
-.DEFAULT:
+.SILENT: $(STAMP_KERNEL_CONFIG)
+$(STAMP_KERNEL_CONFIG):
- @set -e ; test -f .local-symbols || ( \
+ @set -e ; test -f local-symbols || ( \
echo "/--------------" ;\
echo "| You shouldn't run make in the backports tree, but only in" ;\
@@ -60,57 +62,61 @@ mrproper:
@@ -34,7 +34,7 @@
- @set -e ; if [ "$$(cat .kernel_config_md5 2>/dev/null)" != "$(CONFIG_MD5)" ] ;\
- then \
- echo -n "Generating local configuration database from kernel ..." ;\
-- grep -v -f .local-symbols $(KERNEL_CONFIG) | grep = | ( \
+- grep -v -f local-symbols $(KERNEL_CONFIG) | grep = | ( \
- while read l ; do \
- if [ "$${l:0:7}" != "CONFIG_" ] ; then \
- continue ;\
@@ -85,9 +85,9 @@
+ @rm -f .kernel_config_md5_*
+ @touch $@
+
-+Kconfig.kernel: $(STAMP_KERNEL_CONFIG) .local-symbols
++Kconfig.kernel: $(STAMP_KERNEL_CONFIG) local-symbols
+ @printf "Generating local configuration database from kernel ..."
-+ @grep -v -f .local-symbols $(KERNEL_CONFIG) | grep = | ( \
++ @grep -v -f local-symbols $(KERNEL_CONFIG) | grep = | ( \
+ while read l ; do \
+ if [ "$${l:0:7}" != "CONFIG_" ] ; then \
+ continue ;\
@@ -148,7 +148,7 @@
@$(MAKE) oldconfig
- @echo -n "Building backport-include/backport/autoconf.h ..."
+ @printf "Building backport-include/backport/autoconf.h ..."
- @grep -f .local-symbols .config | ( \
+ @grep -f local-symbols .config | ( \
echo "#ifndef COMPAT_AUTOCONF_INCLUDED" ;\
echo "#define COMPAT_AUTOCONF_INCLUDED" ;\
@@ -80,7 +80,12 @@ backport-include/backport/autoconf.h: .c
diff --git a/package/kernel/mac80211/patches/002-change_allconfig.patch b/package/kernel/mac80211/patches/002-change_allconfig.patch
index a071ae6370..bd5bebfa45 100644
--- a/package/kernel/mac80211/patches/002-change_allconfig.patch
+++ b/package/kernel/mac80211/patches/002-change_allconfig.patch
@@ -1,6 +1,6 @@
--- a/kconf/conf.c
+++ b/kconf/conf.c
-@@ -594,40 +594,12 @@ int main(int ac, char **av)
+@@ -593,40 +593,12 @@ int main(int ac, char **av)
case oldconfig:
case listnewconfig:
case olddefconfig:
@@ -44,7 +44,7 @@
break;
--- a/kconf/confdata.c
+++ b/kconf/confdata.c
-@@ -1170,6 +1170,8 @@ bool conf_set_all_new_symbols(enum conf_
+@@ -1169,6 +1169,8 @@ bool conf_set_all_new_symbols(enum conf_
}
bool has_changed = false;
@@ -53,7 +53,7 @@
for_all_symbols(i, sym) {
if (sym_has_value(sym) || (sym->flags & SYMBOL_VALID))
continue;
-@@ -1213,8 +1215,6 @@ bool conf_set_all_new_symbols(enum conf_
+@@ -1212,8 +1214,6 @@ bool conf_set_all_new_symbols(enum conf_
}
diff --git a/package/kernel/mac80211/patches/004-kconfig_backport_fix.patch b/package/kernel/mac80211/patches/004-kconfig_backport_fix.patch
index f11029844c..2c9572ec93 100644
--- a/package/kernel/mac80211/patches/004-kconfig_backport_fix.patch
+++ b/package/kernel/mac80211/patches/004-kconfig_backport_fix.patch
@@ -17,7 +17,7 @@
#undef IS_ENABLED
#define IS_ENABLED(option) \
(config_enabled(option) || config_enabled(option##_MODULE))
-@@ -24,6 +27,8 @@
+@@ -31,6 +34,8 @@
#undef IS_BUILTIN
#define IS_BUILTIN(option) config_enabled(option)
diff --git a/package/kernel/mac80211/patches/005-revert-devcoredump.patch b/package/kernel/mac80211/patches/005-revert-devcoredump.patch
index ff460900ff..1216b99574 100644
--- a/package/kernel/mac80211/patches/005-revert-devcoredump.patch
+++ b/package/kernel/mac80211/patches/005-revert-devcoredump.patch
@@ -1,6 +1,6 @@
--- a/compat/Makefile
+++ b/compat/Makefile
-@@ -35,8 +35,6 @@ compat-$(CPTCFG_KERNEL_4_6) += backport-
+@@ -39,8 +39,6 @@ compat-$(CPTCFG_KERNEL_4_10) += backport
compat-$(CPTCFG_BPAUTO_BUILD_CRYPTO_CCM) += crypto-ccm.o
compat-$(CPTCFG_BPAUTO_CRYPTO_SKCIPHER) += crypto-skcipher.o
@@ -9,144 +9,3 @@
compat-$(CPTCFG_BPAUTO_BUILD_WANT_DEV_COREDUMP) += drivers-base-devcoredump.o
compat-$(CPTCFG_BPAUTO_RHASHTABLE) += lib-rhashtable.o
cordic-objs += lib-cordic.o
---- a/compat/drivers-base-devcoredump.c
-+++ b/compat/drivers-base-devcoredump.c
-@@ -31,6 +31,7 @@
- #include <linux/slab.h>
- #include <linux/fs.h>
- #include <linux/workqueue.h>
-+#include "backports.h"
-
- static struct class devcd_class;
-
-@@ -40,6 +41,10 @@ static bool devcd_disabled;
- /* if data isn't read by userspace after 5 minutes then delete it */
- #define DEVCD_TIMEOUT (HZ * 60 * 5)
-
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(3,11,0)
-+static struct bin_attribute devcd_attr_data;
-+#endif
-+
- struct devcd_entry {
- struct device devcd_dev;
- void *data;
-@@ -69,8 +74,7 @@ static void devcd_dev_release(struct dev
- * a struct device to know when it goes away?
- */
- if (devcd->failing_dev->kobj.sd)
-- sysfs_delete_link(&devcd->failing_dev->kobj, &dev->kobj,
-- "devcoredump");
-+ sysfs_remove_link(&devcd->failing_dev->kobj, "devcoredump");
-
- put_device(devcd->failing_dev);
- kfree(devcd);
-@@ -82,6 +86,9 @@ static void devcd_del(struct work_struct
-
- devcd = container_of(wk, struct devcd_entry, del_wk.work);
-
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(3,11,0)
-+ device_remove_bin_file(&devcd->devcd_dev, &devcd_attr_data);
-+#endif
- device_del(&devcd->devcd_dev);
- put_device(&devcd->devcd_dev);
- }
-@@ -115,6 +122,7 @@ static struct bin_attribute devcd_attr_d
- .write = devcd_data_write,
- };
-
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,11,0)
- static struct bin_attribute *devcd_dev_bin_attrs[] = {
- &devcd_attr_data, NULL,
- };
-@@ -126,6 +134,7 @@ static const struct attribute_group devc
- static const struct attribute_group *devcd_dev_groups[] = {
- &devcd_dev_group, NULL,
- };
-+#endif /* LINUX_VERSION_CODE >= KERNEL_VERSION(3,11,0) */
-
- static int devcd_free(struct device *dev, void *data)
- {
-@@ -160,18 +169,11 @@ static ssize_t disabled_store(struct cla
-
- return count;
- }
--static CLASS_ATTR_RW(disabled);
-
--static struct attribute *devcd_class_attrs[] = {
-- &class_attr_disabled.attr,
-- NULL,
-+static struct class_attribute devcd_class_attrs[] = {
-+ __ATTR_RW(disabled),
-+ __ATTR_NULL
- };
--#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,11,0)
--ATTRIBUTE_GROUPS(devcd_class);
--#else
--#define BP_ATTR_GRP_STRUCT device_attribute
--ATTRIBUTE_GROUPS_BACKPORT(devcd_class);
--#endif
-
- static struct class devcd_class = {
- .name = "devcoredump",
-@@ -179,10 +181,8 @@ static struct class devcd_class = {
- .dev_release = devcd_dev_release,
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(3,11,0)
- .dev_groups = devcd_dev_groups,
--#else
-- .dev_attrs = devcd_class_dev_attrs,
- #endif
-- .class_groups = devcd_class_groups,
-+ .class_attrs = devcd_class_attrs,
- };
-
- static ssize_t devcd_readv(char *buffer, loff_t offset, size_t count,
-@@ -325,6 +325,11 @@ void dev_coredumpm(struct device *dev, s
- if (device_add(&devcd->devcd_dev))
- goto put_device;
-
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(3,11,0)
-+ if (device_create_bin_file(&devcd->devcd_dev, &devcd_attr_data))
-+ goto put_device;
-+#endif
-+
- if (sysfs_create_link(&devcd->devcd_dev.kobj, &dev->kobj,
- "failing_device"))
- /* nothing - symlink will be missing */;
-@@ -367,16 +372,13 @@ void dev_coredumpsg(struct device *dev,
- }
- EXPORT_SYMBOL_GPL(dev_coredumpsg);
-
--static int __init devcoredump_init(void)
-+int __init devcoredump_init(void)
- {
-- init_devcd_class_attrs();
- return class_register(&devcd_class);
- }
--__initcall(devcoredump_init);
-
--static void __exit devcoredump_exit(void)
-+void __exit devcoredump_exit(void)
- {
- class_for_each_device(&devcd_class, NULL, NULL, devcd_free);
- class_unregister(&devcd_class);
- }
--__exitcall(devcoredump_exit);
---- a/include/linux/backport-devcoredump.h
-+++ b/include/linux/backport-devcoredump.h
-@@ -66,7 +66,7 @@ static inline void _devcd_free_sgtable(s
- }
-
-
--#ifdef CONFIG_DEV_COREDUMP
-+#ifdef CPTCFG_BPAUTO_WANT_DEV_COREDUMP
- void dev_coredumpv(struct device *dev, void *data, size_t datalen,
- gfp_t gfp);
-
-@@ -100,6 +100,6 @@ static inline void dev_coredumpsg(struct
- {
- _devcd_free_sgtable(table);
- }
--#endif /* CONFIG_DEV_COREDUMP */
-+#endif /* CPTCFG_BPAUTO_WANT_DEV_COREDUMP */
-
- #endif /* __DEVCOREDUMP_H */
diff --git a/package/kernel/mac80211/patches/006-revert-ktime-changes.patch b/package/kernel/mac80211/patches/006-revert-ktime-changes.patch
deleted file mode 100644
index b839eb4c8d..0000000000
--- a/package/kernel/mac80211/patches/006-revert-ktime-changes.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/drivers/net/wireless/ralink/rt2x00/rt2800usb.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800usb.c
-@@ -177,7 +177,7 @@ static bool rt2800usb_tx_sta_fifo_read_c
- if (rt2800usb_txstatus_pending(rt2x00dev)) {
- /* Read register after 1 ms */
- hrtimer_start(&rt2x00dev->txstatus_timer,
-- TXSTATUS_READ_INTERVAL,
-+ ktime_set(0, TXSTATUS_READ_INTERVAL),
- HRTIMER_MODE_REL);
- return false;
- }
-@@ -204,7 +204,7 @@ static void rt2800usb_async_read_tx_stat
-
- /* Read TX_STA_FIFO register after 2 ms */
- hrtimer_start(&rt2x00dev->txstatus_timer,
-- 2 * TXSTATUS_READ_INTERVAL,
-+ ktime_set(0, 2*TXSTATUS_READ_INTERVAL),
- HRTIMER_MODE_REL);
- }
-
diff --git a/package/kernel/mac80211/patches/007-revert-genetlink-changes.patch b/package/kernel/mac80211/patches/007-revert-genetlink-changes.patch
deleted file mode 100644
index 1a85106bc2..0000000000
--- a/package/kernel/mac80211/patches/007-revert-genetlink-changes.patch
+++ /dev/null
@@ -1,266 +0,0 @@
---- a/net/wireless/nl80211.c
-+++ b/net/wireless/nl80211.c
-@@ -32,8 +32,22 @@ static int nl80211_crypto_settings(struc
- struct cfg80211_crypto_settings *settings,
- int cipher_limit);
-
-+static int nl80211_pre_doit(const struct genl_ops *ops, struct sk_buff *skb,
-+ struct genl_info *info);
-+static void nl80211_post_doit(const struct genl_ops *ops, struct sk_buff *skb,
-+ struct genl_info *info);
-+
- /* the netlink family */
--static struct genl_family nl80211_fam;
-+static struct genl_family nl80211_fam = {
-+ .id = GENL_ID_GENERATE, /* don't bother with a hardcoded ID */
-+ .name = NL80211_GENL_NAME, /* have users key off the name instead */
-+ .hdrsize = 0, /* no private header */
-+ .version = 1, /* no particular meaning now */
-+ .maxattr = NL80211_ATTR_MAX,
-+ .netnsok = true,
-+ .pre_doit = nl80211_pre_doit,
-+ .post_doit = nl80211_post_doit,
-+};
-
- /* multicast groups */
- enum nl80211_multicast_groups {
-@@ -549,14 +563,13 @@ static int nl80211_prepare_wdev_dump(str
-
- if (!cb->args[0]) {
- err = nlmsg_parse(cb->nlh, GENL_HDRLEN + nl80211_fam.hdrsize,
-- genl_family_attrbuf(&nl80211_fam),
-- nl80211_fam.maxattr, nl80211_policy);
-+ nl80211_fam.attrbuf, nl80211_fam.maxattr,
-+ nl80211_policy);
- if (err)
- goto out_unlock;
-
-- *wdev = __cfg80211_wdev_from_attrs(
-- sock_net(skb->sk),
-- genl_family_attrbuf(&nl80211_fam));
-+ *wdev = __cfg80211_wdev_from_attrs(sock_net(skb->sk),
-+ nl80211_fam.attrbuf);
- if (IS_ERR(*wdev)) {
- err = PTR_ERR(*wdev);
- goto out_unlock;
-@@ -1903,7 +1916,7 @@ static int nl80211_dump_wiphy_parse(stru
- struct netlink_callback *cb,
- struct nl80211_dump_wiphy_state *state)
- {
-- struct nlattr **tb = genl_family_attrbuf(&nl80211_fam);
-+ struct nlattr **tb = nl80211_fam.attrbuf;
- int ret = nlmsg_parse(cb->nlh, GENL_HDRLEN + nl80211_fam.hdrsize,
- tb, nl80211_fam.maxattr, nl80211_policy);
- /* ignore parse errors for backward compatibility */
-@@ -7733,7 +7746,6 @@ static int nl80211_send_survey(struct sk
-
- static int nl80211_dump_survey(struct sk_buff *skb, struct netlink_callback *cb)
- {
-- struct nlattr **attrbuf = genl_family_attrbuf(&nl80211_fam);
- struct survey_info survey;
- struct cfg80211_registered_device *rdev;
- struct wireless_dev *wdev;
-@@ -7746,7 +7758,7 @@ static int nl80211_dump_survey(struct sk
- return res;
-
- /* prepare_wdev_dump parsed the attributes */
-- radio_stats = attrbuf[NL80211_ATTR_SURVEY_RADIO_STATS];
-+ radio_stats = nl80211_fam.attrbuf[NL80211_ATTR_SURVEY_RADIO_STATS];
-
- if (!wdev->netdev) {
- res = -EINVAL;
-@@ -8594,14 +8606,14 @@ static int nl80211_testmode_dump(struct
- */
- phy_idx = cb->args[0] - 1;
- } else {
-- struct nlattr **attrbuf = genl_family_attrbuf(&nl80211_fam);
--
- err = nlmsg_parse(cb->nlh, GENL_HDRLEN + nl80211_fam.hdrsize,
-- attrbuf, nl80211_fam.maxattr, nl80211_policy);
-+ nl80211_fam.attrbuf, nl80211_fam.maxattr,
-+ nl80211_policy);
- if (err)
- goto out_err;
-
-- rdev = __cfg80211_rdev_from_attrs(sock_net(skb->sk), attrbuf);
-+ rdev = __cfg80211_rdev_from_attrs(sock_net(skb->sk),
-+ nl80211_fam.attrbuf);
- if (IS_ERR(rdev)) {
- err = PTR_ERR(rdev);
- goto out_err;
-@@ -8609,8 +8621,9 @@ static int nl80211_testmode_dump(struct
- phy_idx = rdev->wiphy_idx;
- rdev = NULL;
-
-- if (attrbuf[NL80211_ATTR_TESTDATA])
-- cb->args[1] = (long)attrbuf[NL80211_ATTR_TESTDATA];
-+ if (nl80211_fam.attrbuf[NL80211_ATTR_TESTDATA])
-+ cb->args[1] =
-+ (long)nl80211_fam.attrbuf[NL80211_ATTR_TESTDATA];
- }
-
- if (cb->args[1]) {
-@@ -10814,7 +10827,8 @@ static int handle_nan_filter(struct nlat
-
- i = 0;
- nla_for_each_nested(attr, attr_filter, rem) {
-- filter[i].filter = nla_memdup(attr, GFP_KERNEL);
-+ filter[i].filter = kmemdup(nla_data(attr), nla_len(attr),
-+ GFP_KERNEL);
- filter[i].len = nla_len(attr);
- i++;
- }
-@@ -11450,7 +11464,6 @@ static int nl80211_prepare_vendor_dump(s
- struct cfg80211_registered_device **rdev,
- struct wireless_dev **wdev)
- {
-- struct nlattr **attrbuf = genl_family_attrbuf(&nl80211_fam);
- u32 vid, subcmd;
- unsigned int i;
- int vcmd_idx = -1;
-@@ -11486,28 +11499,31 @@ static int nl80211_prepare_vendor_dump(s
- }
-
- err = nlmsg_parse(cb->nlh, GENL_HDRLEN + nl80211_fam.hdrsize,
-- attrbuf, nl80211_fam.maxattr, nl80211_policy);
-+ nl80211_fam.attrbuf, nl80211_fam.maxattr,
-+ nl80211_policy);
- if (err)
- goto out_unlock;
-
-- if (!attrbuf[NL80211_ATTR_VENDOR_ID] ||
-- !attrbuf[NL80211_ATTR_VENDOR_SUBCMD]) {
-+ if (!nl80211_fam.attrbuf[NL80211_ATTR_VENDOR_ID] ||
-+ !nl80211_fam.attrbuf[NL80211_ATTR_VENDOR_SUBCMD]) {
- err = -EINVAL;
- goto out_unlock;
- }
-
-- *wdev = __cfg80211_wdev_from_attrs(sock_net(skb->sk), attrbuf);
-+ *wdev = __cfg80211_wdev_from_attrs(sock_net(skb->sk),
-+ nl80211_fam.attrbuf);
- if (IS_ERR(*wdev))
- *wdev = NULL;
-
-- *rdev = __cfg80211_rdev_from_attrs(sock_net(skb->sk), attrbuf);
-+ *rdev = __cfg80211_rdev_from_attrs(sock_net(skb->sk),
-+ nl80211_fam.attrbuf);
- if (IS_ERR(*rdev)) {
- err = PTR_ERR(*rdev);
- goto out_unlock;
- }
-
-- vid = nla_get_u32(attrbuf[NL80211_ATTR_VENDOR_ID]);
-- subcmd = nla_get_u32(attrbuf[NL80211_ATTR_VENDOR_SUBCMD]);
-+ vid = nla_get_u32(nl80211_fam.attrbuf[NL80211_ATTR_VENDOR_ID]);
-+ subcmd = nla_get_u32(nl80211_fam.attrbuf[NL80211_ATTR_VENDOR_SUBCMD]);
-
- for (i = 0; i < (*rdev)->wiphy.n_vendor_commands; i++) {
- const struct wiphy_vendor_command *vcmd;
-@@ -11531,9 +11547,9 @@ static int nl80211_prepare_vendor_dump(s
- goto out_unlock;
- }
-
-- if (attrbuf[NL80211_ATTR_VENDOR_DATA]) {
-- data = nla_data(attrbuf[NL80211_ATTR_VENDOR_DATA]);
-- data_len = nla_len(attrbuf[NL80211_ATTR_VENDOR_DATA]);
-+ if (nl80211_fam.attrbuf[NL80211_ATTR_VENDOR_DATA]) {
-+ data = nla_data(nl80211_fam.attrbuf[NL80211_ATTR_VENDOR_DATA]);
-+ data_len = nla_len(nl80211_fam.attrbuf[NL80211_ATTR_VENDOR_DATA]);
- }
-
- /* 0 is the first index - add 1 to parse only once */
-@@ -12795,21 +12811,6 @@ static __genl_const struct genl_ops nl80
- },
- };
-
--static struct genl_family nl80211_fam __ro_after_init = {
-- .name = NL80211_GENL_NAME, /* have users key off the name instead */
-- .hdrsize = 0, /* no private header */
-- .version = 1, /* no particular meaning now */
-- .maxattr = NL80211_ATTR_MAX,
-- .netnsok = true,
-- .pre_doit = nl80211_pre_doit,
-- .post_doit = nl80211_post_doit,
-- .module = THIS_MODULE,
-- .ops = nl80211_ops,
-- .n_ops = ARRAY_SIZE(nl80211_ops),
-- .mcgrps = nl80211_mcgrps,
-- .n_mcgrps = ARRAY_SIZE(nl80211_mcgrps),
--};
--
- /* notification functions */
-
- void nl80211_notify_wiphy(struct cfg80211_registered_device *rdev,
-@@ -14759,11 +14760,12 @@ void nl80211_send_ap_stopped(struct wire
-
- /* initialisation/exit functions */
-
--int __init nl80211_init(void)
-+int nl80211_init(void)
- {
- int err;
-
-- err = genl_register_family(&nl80211_fam);
-+ err = genl_register_family_with_ops_groups(&nl80211_fam, nl80211_ops,
-+ nl80211_mcgrps);
- if (err)
- return err;
-
---- a/drivers/net/wireless/mac80211_hwsim.c
-+++ b/drivers/net/wireless/mac80211_hwsim.c
-@@ -587,8 +587,15 @@ struct hwsim_radiotap_ack_hdr {
- __le16 rt_chbitmask;
- } __packed;
-
--/* MAC80211_HWSIM netlink family */
--static struct genl_family hwsim_genl_family;
-+/* MAC80211_HWSIM netlinf family */
-+static struct genl_family hwsim_genl_family = {
-+ .id = GENL_ID_GENERATE,
-+ .hdrsize = 0,
-+ .name = "MAC80211_HWSIM",
-+ .version = 1,
-+ .maxattr = HWSIM_ATTR_MAX,
-+ .netnsok = true,
-+};
-
- enum hwsim_multicast_groups {
- HWSIM_MCGRP_CONFIG,
-@@ -3250,18 +3257,6 @@ static __genl_const struct genl_ops hwsi
- },
- };
-
--static struct genl_family hwsim_genl_family __ro_after_init = {
-- .name = "MAC80211_HWSIM",
-- .version = 1,
-- .maxattr = HWSIM_ATTR_MAX,
-- .netnsok = true,
-- .module = THIS_MODULE,
-- .ops = hwsim_ops,
-- .n_ops = ARRAY_SIZE(hwsim_ops),
-- .mcgrps = hwsim_mcgrps,
-- .n_mcgrps = ARRAY_SIZE(hwsim_mcgrps),
--};
--
- static void destroy_radio(struct work_struct *work)
- {
- struct mac80211_hwsim_data *data =
-@@ -3309,13 +3304,15 @@ static struct notifier_block hwsim_netli
- .notifier_call = mac80211_hwsim_netlink_notify,
- };
-
--static int __init hwsim_init_netlink(void)
-+static int hwsim_init_netlink(void)
- {
- int rc;
-
- printk(KERN_INFO "mac80211_hwsim: initializing netlink\n");
-
-- rc = genl_register_family(&hwsim_genl_family);
-+ rc = genl_register_family_with_ops_groups(&hwsim_genl_family,
-+ hwsim_ops,
-+ hwsim_mcgrps);
- if (rc)
- goto failure;
-
diff --git a/package/kernel/mac80211/patches/008-revert-ndo_stats64-cleanup.patch b/package/kernel/mac80211/patches/008-revert-ndo_stats64-cleanup.patch
deleted file mode 100644
index 0f6f0f919f..0000000000
--- a/package/kernel/mac80211/patches/008-revert-ndo_stats64-cleanup.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/net/mac80211/iface.c
-+++ b/net/mac80211/iface.c
-@@ -1133,7 +1133,7 @@ static u16 ieee80211_netdev_select_queue
- return ieee80211_select_queue(IEEE80211_DEV_TO_SUB_IF(dev), skb);
- }
-
--static void
-+static struct rtnl_link_stats64 *
- ieee80211_get_stats64(struct net_device *dev, struct rtnl_link_stats64 *stats)
- {
- int i;
-@@ -1158,6 +1158,8 @@ ieee80211_get_stats64(struct net_device
- stats->rx_bytes += rx_bytes;
- stats->tx_bytes += tx_bytes;
- }
-+
-+ return stats;
- }
-
- static const struct net_device_ops ieee80211_dataif_ops = {
diff --git a/package/kernel/mac80211/patches/009-revert-mtu-changes.patch b/package/kernel/mac80211/patches/009-revert-mtu-changes.patch
deleted file mode 100644
index f5e2757d3f..0000000000
--- a/package/kernel/mac80211/patches/009-revert-mtu-changes.patch
+++ /dev/null
@@ -1,338 +0,0 @@
---- a/net/mac80211/iface.c
-+++ b/net/mac80211/iface.c
-@@ -151,6 +151,15 @@ void ieee80211_recalc_idle(struct ieee80
- ieee80211_hw_config(local, change);
- }
-
-+static int ieee80211_change_mtu(struct net_device *dev, int new_mtu)
-+{
-+ if (new_mtu < 256 || new_mtu > IEEE80211_MAX_DATA_LEN)
-+ return -EINVAL;
-+
-+ dev->mtu = new_mtu;
-+ return 0;
-+}
-+
- static int ieee80211_verify_mac(struct ieee80211_sub_if_data *sdata, u8 *addr,
- bool check_dup)
- {
-@@ -1168,6 +1177,7 @@ static const struct net_device_ops ieee8
- .ndo_uninit = ieee80211_uninit,
- .ndo_start_xmit = ieee80211_subif_start_xmit,
- .ndo_set_rx_mode = ieee80211_set_multicast_list,
-+ .ndo_change_mtu = ieee80211_change_mtu,
- .ndo_set_mac_address = ieee80211_change_mac,
- .ndo_select_queue = ieee80211_netdev_select_queue,
- .ndo_get_stats64 = ieee80211_get_stats64,
-@@ -1211,6 +1221,7 @@ static const struct net_device_ops ieee8
- .ndo_uninit = ieee80211_uninit,
- .ndo_start_xmit = ieee80211_monitor_start_xmit,
- .ndo_set_rx_mode = ieee80211_set_multicast_list,
-+ .ndo_change_mtu = ieee80211_change_mtu,
- .ndo_set_mac_address = ieee80211_change_mac,
- .ndo_select_queue = ieee80211_monitor_select_queue,
- .ndo_get_stats64 = ieee80211_get_stats64,
-@@ -1919,10 +1930,6 @@ int ieee80211_if_add(struct ieee80211_lo
-
- netdev_set_default_ethtool_ops(ndev, &ieee80211_ethtool_ops);
-
-- /* MTU range: 256 - 2304 */
-- ndev->min_mtu = 256;
-- ndev->max_mtu = IEEE80211_MAX_DATA_LEN;
--
- ret = register_netdevice(ndev);
- if (ret) {
- ieee80211_if_free(ndev);
---- a/drivers/net/wireless/ath/wil6210/netdev.c
-+++ b/drivers/net/wireless/ath/wil6210/netdev.c
-@@ -42,6 +42,21 @@ static int wil_stop(struct net_device *n
- return wil_down(wil);
- }
-
-+static int wil_change_mtu(struct net_device *ndev, int new_mtu)
-+{
-+ struct wil6210_priv *wil = ndev_to_wil(ndev);
-+
-+ if (new_mtu < 68 || new_mtu > mtu_max) {
-+ wil_err(wil, "invalid MTU %d\n", new_mtu);
-+ return -EINVAL;
-+ }
-+
-+ wil_dbg_misc(wil, "change MTU %d -> %d\n", ndev->mtu, new_mtu);
-+ ndev->mtu = new_mtu;
-+
-+ return 0;
-+}
-+
- static int wil_do_ioctl(struct net_device *ndev, struct ifreq *ifr, int cmd)
- {
- struct wil6210_priv *wil = ndev_to_wil(ndev);
-@@ -55,6 +70,7 @@ static const struct net_device_ops wil_n
- .ndo_start_xmit = wil_start_xmit,
- .ndo_set_mac_address = eth_mac_addr,
- .ndo_validate_addr = eth_validate_addr,
-+ .ndo_change_mtu = wil_change_mtu,
- .ndo_do_ioctl = wil_do_ioctl,
- };
-
-@@ -111,7 +127,6 @@ static int wil6210_netdev_poll_tx(struct
- static void wil_dev_setup(struct net_device *dev)
- {
- ether_setup(dev);
-- dev->max_mtu = mtu_max;
- dev->tx_queue_len = WIL_TX_Q_LEN_DEFAULT;
- }
-
---- a/drivers/net/wireless/atmel/atmel.c
-+++ b/drivers/net/wireless/atmel/atmel.c
-@@ -1295,6 +1295,14 @@ static struct iw_statistics *atmel_get_w
- return &priv->wstats;
- }
-
-+static int atmel_change_mtu(struct net_device *dev, int new_mtu)
-+{
-+ if ((new_mtu < 68) || (new_mtu > 2312))
-+ return -EINVAL;
-+ dev->mtu = new_mtu;
-+ return 0;
-+}
-+
- static int atmel_set_mac_address(struct net_device *dev, void *p)
- {
- struct sockaddr *addr = p;
-@@ -1498,6 +1506,7 @@ static const struct file_operations atme
- static const struct net_device_ops atmel_netdev_ops = {
- .ndo_open = atmel_open,
- .ndo_stop = atmel_close,
-+ .ndo_change_mtu = atmel_change_mtu,
- .ndo_set_mac_address = atmel_set_mac_address,
- .ndo_start_xmit = start_tx,
- .ndo_do_ioctl = atmel_ioctl,
-@@ -1591,10 +1600,6 @@ struct net_device *init_atmel_card(unsig
- dev->irq = irq;
- dev->base_addr = port;
-
-- /* MTU range: 68 - 2312 */
-- dev->min_mtu = 68;
-- dev->max_mtu = MAX_WIRELESS_BODY - ETH_FCS_LEN;
--
- SET_NETDEV_DEV(dev, sys_dev);
-
- if ((rc = request_irq(dev->irq, service_interrupt, IRQF_SHARED, dev->name, dev))) {
---- a/drivers/net/wireless/cisco/airo.c
-+++ b/drivers/net/wireless/cisco/airo.c
-@@ -2329,6 +2329,14 @@ static int airo_set_mac_address(struct n
- return 0;
- }
-
-+static int airo_change_mtu(struct net_device *dev, int new_mtu)
-+{
-+ if ((new_mtu < 68) || (new_mtu > 2400))
-+ return -EINVAL;
-+ dev->mtu = new_mtu;
-+ return 0;
-+}
-+
- static LIST_HEAD(airo_devices);
-
- static void add_airo_dev(struct airo_info *ai)
-@@ -2648,6 +2656,7 @@ static const struct net_device_ops airo1
- .ndo_get_stats = airo_get_stats,
- .ndo_set_mac_address = airo_set_mac_address,
- .ndo_do_ioctl = airo_ioctl,
-+ .ndo_change_mtu = airo_change_mtu,
- };
-
- static void wifi_setup(struct net_device *dev)
-@@ -2659,8 +2668,6 @@ static void wifi_setup(struct net_device
- dev->type = ARPHRD_IEEE80211;
- dev->hard_header_len = ETH_HLEN;
- dev->mtu = AIRO_DEF_MTU;
-- dev->min_mtu = 68;
-- dev->max_mtu = MIC_MSGLEN_MAX;
- dev->addr_len = ETH_ALEN;
- dev->tx_queue_len = 100;
-
-@@ -2747,6 +2754,7 @@ static const struct net_device_ops airo_
- .ndo_set_rx_mode = airo_set_multicast_list,
- .ndo_set_mac_address = airo_set_mac_address,
- .ndo_do_ioctl = airo_ioctl,
-+ .ndo_change_mtu = airo_change_mtu,
- .ndo_validate_addr = eth_validate_addr,
- };
-
-@@ -2758,6 +2766,7 @@ static const struct net_device_ops mpi_n
- .ndo_set_rx_mode = airo_set_multicast_list,
- .ndo_set_mac_address = airo_set_mac_address,
- .ndo_do_ioctl = airo_ioctl,
-+ .ndo_change_mtu = airo_change_mtu,
- .ndo_validate_addr = eth_validate_addr,
- };
-
-@@ -2813,7 +2822,6 @@ static struct net_device *_init_airo_car
- dev->irq = irq;
- dev->base_addr = port;
- dev->priv_flags &= ~IFF_TX_SKB_SHARING;
-- dev->max_mtu = MIC_MSGLEN_MAX;
-
- SET_NETDEV_DEV(dev, dmdev);
-
---- a/drivers/net/wireless/intel/ipw2x00/ipw2100.c
-+++ b/drivers/net/wireless/intel/ipw2x00/ipw2100.c
-@@ -6039,6 +6039,7 @@ static const struct net_device_ops ipw21
- .ndo_open = ipw2100_open,
- .ndo_stop = ipw2100_close,
- .ndo_start_xmit = libipw_xmit,
-+ .ndo_change_mtu = libipw_change_mtu,
- .ndo_tx_timeout = ipw2100_tx_timeout,
- .ndo_set_mac_address = ipw2100_set_address,
- .ndo_validate_addr = eth_validate_addr,
-@@ -6074,8 +6075,6 @@ static struct net_device *ipw2100_alloc_
- dev->wireless_data = &priv->wireless_data;
- dev->watchdog_timeo = 3 * HZ;
- dev->irq = 0;
-- dev->min_mtu = 68;
-- dev->max_mtu = LIBIPW_DATA_LEN;
-
- /* NOTE: We don't use the wireless_handlers hook
- * in dev as the system will start throwing WX requests
---- a/drivers/net/wireless/intel/ipw2x00/ipw2200.c
-+++ b/drivers/net/wireless/intel/ipw2x00/ipw2200.c
-@@ -11561,6 +11561,7 @@ static const struct net_device_ops ipw_p
- .ndo_open = ipw_prom_open,
- .ndo_stop = ipw_prom_stop,
- .ndo_start_xmit = ipw_prom_hard_start_xmit,
-+ .ndo_change_mtu = libipw_change_mtu,
- .ndo_set_mac_address = eth_mac_addr,
- .ndo_validate_addr = eth_validate_addr,
- };
-@@ -11586,9 +11587,6 @@ static int ipw_prom_alloc(struct ipw_pri
- priv->prom_net_dev->type = ARPHRD_IEEE80211_RADIOTAP;
- priv->prom_net_dev->netdev_ops = &ipw_prom_netdev_ops;
-
-- priv->prom_net_dev->min_mtu = 68;
-- priv->prom_net_dev->max_mtu = LIBIPW_DATA_LEN;
--
- priv->prom_priv->ieee->iw_mode = IW_MODE_MONITOR;
- SET_NETDEV_DEV(priv->prom_net_dev, &priv->pci_dev->dev);
-
-@@ -11621,6 +11619,7 @@ static const struct net_device_ops ipw_n
- .ndo_set_rx_mode = ipw_net_set_multicast_list,
- .ndo_set_mac_address = ipw_net_set_mac_address,
- .ndo_start_xmit = libipw_xmit,
-+ .ndo_change_mtu = libipw_change_mtu,
- .ndo_validate_addr = eth_validate_addr,
- };
-
-@@ -11730,9 +11729,6 @@ static int ipw_pci_probe(struct pci_dev
- net_dev->wireless_handlers = &ipw_wx_handler_def;
- net_dev->ethtool_ops = &ipw_ethtool_ops;
-
-- net_dev->min_mtu = 68;
-- net_dev->max_mtu = LIBIPW_DATA_LEN;
--
- err = sysfs_create_group(&pdev->dev.kobj, &ipw_attribute_group);
- if (err) {
- IPW_ERROR("failed to create sysfs device attributes\n");
---- a/drivers/net/wireless/intel/ipw2x00/libipw.h
-+++ b/drivers/net/wireless/intel/ipw2x00/libipw.h
-@@ -948,6 +948,7 @@ static inline int libipw_is_cck_rate(u8
- /* libipw.c */
- void free_libipw(struct net_device *dev, int monitor);
- struct net_device *alloc_libipw(int sizeof_priv, int monitor);
-+int libipw_change_mtu(struct net_device *dev, int new_mtu);
-
- void libipw_networks_age(struct libipw_device *ieee, unsigned long age_secs);
-
---- a/drivers/net/wireless/intel/ipw2x00/libipw_module.c
-+++ b/drivers/net/wireless/intel/ipw2x00/libipw_module.c
-@@ -118,6 +118,15 @@ static void libipw_networks_initialize(s
- &ieee->network_free_list);
- }
-
-+int libipw_change_mtu(struct net_device *dev, int new_mtu)
-+{
-+ if ((new_mtu < 68) || (new_mtu > LIBIPW_DATA_LEN))
-+ return -EINVAL;
-+ dev->mtu = new_mtu;
-+ return 0;
-+}
-+EXPORT_SYMBOL(libipw_change_mtu);
-+
- struct net_device *alloc_libipw(int sizeof_priv, int monitor)
- {
- struct libipw_device *ieee;
---- a/drivers/net/wireless/intersil/hostap/hostap_main.c
-+++ b/drivers/net/wireless/intersil/hostap/hostap_main.c
-@@ -765,6 +765,16 @@ static void hostap_set_multicast_list(st
- }
-
-
-+static int prism2_change_mtu(struct net_device *dev, int new_mtu)
-+{
-+ if (new_mtu < PRISM2_MIN_MTU || new_mtu > PRISM2_MAX_MTU)
-+ return -EINVAL;
-+
-+ dev->mtu = new_mtu;
-+ return 0;
-+}
-+
-+
- static void prism2_tx_timeout(struct net_device *dev)
- {
- struct hostap_interface *iface;
-@@ -803,6 +813,7 @@ static const struct net_device_ops hosta
- .ndo_do_ioctl = hostap_ioctl,
- .ndo_set_mac_address = prism2_set_mac_address,
- .ndo_set_rx_mode = hostap_set_multicast_list,
-+ .ndo_change_mtu = prism2_change_mtu,
- .ndo_tx_timeout = prism2_tx_timeout,
- .ndo_validate_addr = eth_validate_addr,
- };
-@@ -815,6 +826,7 @@ static const struct net_device_ops hosta
- .ndo_do_ioctl = hostap_ioctl,
- .ndo_set_mac_address = prism2_set_mac_address,
- .ndo_set_rx_mode = hostap_set_multicast_list,
-+ .ndo_change_mtu = prism2_change_mtu,
- .ndo_tx_timeout = prism2_tx_timeout,
- .ndo_validate_addr = eth_validate_addr,
- };
-@@ -827,6 +839,7 @@ static const struct net_device_ops hosta
- .ndo_do_ioctl = hostap_ioctl,
- .ndo_set_mac_address = prism2_set_mac_address,
- .ndo_set_rx_mode = hostap_set_multicast_list,
-+ .ndo_change_mtu = prism2_change_mtu,
- .ndo_tx_timeout = prism2_tx_timeout,
- .ndo_validate_addr = eth_validate_addr,
- };
-@@ -838,8 +851,6 @@ void hostap_setup_dev(struct net_device
-
- iface = netdev_priv(dev);
- ether_setup(dev);
-- dev->min_mtu = PRISM2_MIN_MTU;
-- dev->max_mtu = PRISM2_MAX_MTU;
- dev->priv_flags &= ~IFF_TX_SKB_SHARING;
-
- /* kernel callbacks */
---- a/drivers/net/wireless/intersil/orinoco/main.c
-+++ b/drivers/net/wireless/intersil/orinoco/main.c
-@@ -322,6 +322,9 @@ int orinoco_change_mtu(struct net_device
- {
- struct orinoco_private *priv = ndev_priv(dev);
-
-+ if ((new_mtu < ORINOCO_MIN_MTU) || (new_mtu > ORINOCO_MAX_MTU))
-+ return -EINVAL;
-+
- /* MTU + encapsulation + header length */
- if ((new_mtu + ENCAPS_OVERHEAD + sizeof(struct ieee80211_hdr)) >
- (priv->nicbuf_size - ETH_HLEN))
-@@ -2285,9 +2288,6 @@ int orinoco_if_add(struct orinoco_privat
- dev->base_addr = base_addr;
- dev->irq = irq;
-
-- dev->min_mtu = ORINOCO_MIN_MTU;
-- dev->max_mtu = ORINOCO_MAX_MTU;
--
- SET_NETDEV_DEV(dev, priv->dev);
- ret = register_netdev(dev);
- if (ret)
diff --git a/package/kernel/mac80211/patches/010-disable_rfkill.patch b/package/kernel/mac80211/patches/010-disable_rfkill.patch
index 2902e498d8..d5253063ce 100644
--- a/package/kernel/mac80211/patches/010-disable_rfkill.patch
+++ b/package/kernel/mac80211/patches/010-disable_rfkill.patch
@@ -10,6 +10,6 @@
+#undef CONFIG_RFKILL_MODULE
+#undef CONFIG_RFKILL_FULL_MODULE
+
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(3,10,0)
+ #if LINUX_VERSION_IS_GEQ(3,10,0)
#include_next <linux/rfkill.h>
#else
diff --git a/package/kernel/mac80211/patches/011-backport_strscpy.patch b/package/kernel/mac80211/patches/011-backport_strscpy.patch
deleted file mode 100644
index c8e26c46f2..0000000000
--- a/package/kernel/mac80211/patches/011-backport_strscpy.patch
+++ /dev/null
@@ -1,43 +0,0 @@
---- a/backport-include/linux/string.h
-+++ b/backport-include/linux/string.h
-@@ -25,4 +25,8 @@ extern void *memdup_user_nul(const void
- void memzero_explicit(void *s, size_t count);
- #endif
-
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(4,3,0))
-+ssize_t strscpy(char *dest, const char *src, size_t count);
-+#endif
-+
- #endif /* __BACKPORT_LINUX_STRING_H */
---- a/compat/backport-4.3.c
-+++ b/compat/backport-4.3.c
-@@ -57,3 +57,29 @@ void seq_hex_dump(struct seq_file *m, co
- }
- }
- EXPORT_SYMBOL_GPL(seq_hex_dump);
-+
-+ssize_t strscpy(char *dest, const char *src, size_t count)
-+{
-+ long res = 0;
-+
-+ if (count == 0)
-+ return -E2BIG;
-+
-+ while (count) {
-+ char c;
-+
-+ c = src[res];
-+ dest[res] = c;
-+ if (!c)
-+ return res;
-+ res++;
-+ count--;
-+ }
-+
-+ /* Hit buffer length without finding a NUL; force NUL-termination. */
-+ if (res)
-+ dest[res-1] = '\0';
-+
-+ return -E2BIG;
-+}
-+EXPORT_SYMBOL_GPL(strscpy);
diff --git a/package/kernel/mac80211/patches/013-backport-dev_coredumpm-function.patch b/package/kernel/mac80211/patches/013-backport-dev_coredumpm-function.patch
deleted file mode 100644
index 2c80aedc48..0000000000
--- a/package/kernel/mac80211/patches/013-backport-dev_coredumpm-function.patch
+++ /dev/null
@@ -1,156 +0,0 @@
-From ec8549e611465558bdf1bb5e9d308f39e5e248cd Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke at hauke-m.de>
-Date: Sun, 17 Sep 2017 14:41:48 +0200
-Subject: backport dev_coredumpm() function
-
-This is copied from a more recent backports version to add the
-dev_coredumpm() function when the internal core devdump is not used.
----
- compat/Makefile | 1 +
- compat/backport-4.7.c | 82 ++++++++++++++++++++++++++++++++++++++++++
- include/linux/bp-devcoredump.h | 32 +++++++++++++++++
- include/linux/devcoredump.h | 1 +
- 4 files changed, 116 insertions(+)
- create mode 100644 compat/backport-4.7.c
- create mode 100644 include/linux/bp-devcoredump.h
-
---- a/compat/Makefile
-+++ b/compat/Makefile
-@@ -32,6 +32,7 @@ compat-$(CPTCFG_KERNEL_4_3) += backport-
- compat-$(CPTCFG_KERNEL_4_4) += backport-4.4.o
- compat-$(CPTCFG_KERNEL_4_5) += backport-4.5.o
- compat-$(CPTCFG_KERNEL_4_6) += backport-4.6.o
-+compat-$(CPTCFG_KERNEL_4_6) += backport-4.7.o
-
- compat-$(CPTCFG_BPAUTO_BUILD_CRYPTO_CCM) += crypto-ccm.o
- compat-$(CPTCFG_BPAUTO_CRYPTO_SKCIPHER) += crypto-skcipher.o
---- /dev/null
-+++ b/compat/backport-4.7.c
-@@ -0,0 +1,82 @@
-+/*
-+ * Copyright(c) 2016 Hauke Mehrtens <hauke at hauke-m.de>
-+ *
-+ * Backport functionality introduced in Linux 4.7.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/export.h>
-+#include <linux/list.h>
-+#include <linux/rcupdate.h>
-+#include <linux/slab.h>
-+#include <linux/spinlock.h>
-+#include <linux/skbuff.h>
-+#include <net/netlink.h>
-+
-+/*
-+ * Below 3.18 or if the kernel has devcoredump disabled, we copied the
-+ * entire devcoredump, so no need to define these functions.
-+ */
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,18,0) && \
-+ !defined(CPTCFG_BPAUTO_BUILD_WANT_DEV_COREDUMP)
-+#include <linux/devcoredump.h>
-+#include <linux/scatterlist.h>
-+
-+static void devcd_free_sgtable(void *data)
-+{
-+ struct scatterlist *table = data;
-+ int i;
-+ struct page *page;
-+ struct scatterlist *iter;
-+ struct scatterlist *delete_iter;
-+
-+ /* free pages */
-+ iter = table;
-+ for_each_sg(table, iter, sg_nents(table), i) {
-+ page = sg_page(iter);
-+ if (page)
-+ __free_page(page);
-+ }
-+
-+ /* then free all chained tables */
-+ iter = table;
-+ delete_iter = table; /* always points on a head of a table */
-+ while (!sg_is_last(iter)) {
-+ iter++;
-+ if (sg_is_chain(iter)) {
-+ iter = sg_chain_ptr(iter);
-+ kfree(delete_iter);
-+ delete_iter = iter;
-+ }
-+ }
-+
-+ /* free the last table */
-+ kfree(delete_iter);
-+}
-+
-+static ssize_t devcd_read_from_sgtable(char *buffer, loff_t offset,
-+ size_t buf_len, void *data,
-+ size_t data_len)
-+{
-+ struct scatterlist *table = data;
-+
-+ if (offset > data_len)
-+ return -EINVAL;
-+
-+ if (offset + buf_len > data_len)
-+ buf_len = data_len - offset;
-+ return sg_pcopy_to_buffer(table, sg_nents(table), buffer, buf_len,
-+ offset);
-+}
-+
-+void dev_coredumpsg(struct device *dev, struct scatterlist *table,
-+ size_t datalen, gfp_t gfp)
-+{
-+ dev_coredumpm(dev, THIS_MODULE, table, datalen, gfp,
-+ devcd_read_from_sgtable, devcd_free_sgtable);
-+}
-+EXPORT_SYMBOL_GPL(dev_coredumpsg);
-+#endif /* >= 3.18.0 */
---- /dev/null
-+++ b/include/linux/bp-devcoredump.h
-@@ -0,0 +1,32 @@
-+#ifndef __BACKPORT_LINUX_DEVCOREDUMP_H
-+#define __BACKPORT_LINUX_DEVCOREDUMP_H
-+#include <linux/version.h>
-+#include <linux/scatterlist.h>
-+
-+/* We only need to add our wrapper inside the range from 3.18 until
-+ * 4.6, outside that we can let our BPAUTO mechanism handle it.
-+ */
-+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,18,0) && \
-+ LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0))
-+static inline
-+void backport_dev_coredumpm(struct device *dev, struct module *owner,
-+ void *data, size_t datalen, gfp_t gfp,
-+ ssize_t (*read_fn)(char *buffer, loff_t offset,
-+ size_t count, void *data,
-+ size_t datalen),
-+ void (*free_fn)(void *data))
-+{
-+ return dev_coredumpm(dev, owner, (const void *)data, datalen, gfp,
-+ (void *)read_fn, (void *)free_fn);
-+}
-+
-+#define dev_coredumpm LINUX_BACKPORT(dev_coredumpm)
-+
-+#define dev_coredumpsg LINUX_BACKPORT(dev_coredumpsg)
-+void dev_coredumpsg(struct device *dev, struct scatterlist *table,
-+ size_t datalen, gfp_t gfp);
-+
-+#endif /* (LINUX_VERSION_IS_GEQ(3,18,0) && \
-+ LINUX_VERSION_IS_LESS(4,7,0)) */
-+
-+#endif /* __BACKPORT_LINUX_DEVCOREDUMP_H */
---- a/include/linux/devcoredump.h
-+++ b/include/linux/devcoredump.h
-@@ -1,6 +1,7 @@
- /* Automatically created during backport process */
- #ifndef CPTCFG_BPAUTO_BUILD_WANT_DEV_COREDUMP
- #include_next <linux/devcoredump.h>
-+#include <linux/bp-devcoredump.h>
- #else
- #undef dev_coredumpv
- #define dev_coredumpv LINUX_BACKPORT(dev_coredumpv)
diff --git a/package/kernel/mac80211/patches/015-ipw200-mtu.patch b/package/kernel/mac80211/patches/015-ipw200-mtu.patch
new file mode 100644
index 0000000000..8d273a095b
--- /dev/null
+++ b/package/kernel/mac80211/patches/015-ipw200-mtu.patch
@@ -0,0 +1,34 @@
+--- a/drivers/net/wireless/intel/ipw2x00/ipw2200.c
++++ b/drivers/net/wireless/intel/ipw2x00/ipw2200.c
+@@ -11506,6 +11506,15 @@ static const struct attribute_group ipw_
+ .attrs = ipw_sysfs_entries,
+ };
+
++#if LINUX_VERSION_IS_LESS(4,10,0)
++static int __change_mtu(struct net_device *ndev, int new_mtu){
++ if (new_mtu < 68 || new_mtu > LIBIPW_DATA_LEN)
++ return -EINVAL;
++ ndev->mtu = new_mtu;
++ return 0;
++}
++#endif
++
+ #ifdef CPTCFG_IPW2200_PROMISCUOUS
+ static int ipw_prom_open(struct net_device *dev)
+ {
+@@ -11554,15 +11563,6 @@ static netdev_tx_t ipw_prom_hard_start_x
+ return NETDEV_TX_OK;
+ }
+
+-#if LINUX_VERSION_IS_LESS(4,10,0)
+-static int __change_mtu(struct net_device *ndev, int new_mtu){
+- if (new_mtu < 68 || new_mtu > LIBIPW_DATA_LEN)
+- return -EINVAL;
+- ndev->mtu = new_mtu;
+- return 0;
+-}
+-#endif
+-
+ static const struct net_device_ops ipw_prom_netdev_ops = {
+ #if LINUX_VERSION_IS_LESS(4,10,0)
+ .ndo_change_mtu = __change_mtu,
diff --git a/package/kernel/mac80211/patches/020-01-rt2x00-avoid-introducing-a-USB-dependency-in-the-rt2.patch b/package/kernel/mac80211/patches/020-01-rt2x00-avoid-introducing-a-USB-dependency-in-the-rt2.patch
deleted file mode 100644
index cf551fde02..0000000000
--- a/package/kernel/mac80211/patches/020-01-rt2x00-avoid-introducing-a-USB-dependency-in-the-rt2.patch
+++ /dev/null
@@ -1,78 +0,0 @@
-From 6232c17438ed01f43665197db5a98a4a4f77ef47 Mon Sep 17 00:00:00 2001
-From: Stanislaw Gruszka <sgruszka at redhat.com>
-Date: Thu, 2 Feb 2017 10:57:40 +0100
-Subject: [PATCH 01/19] rt2x00: avoid introducing a USB dependency in the
- rt2x00lib module
-
-As reported by Felix:
-
-Though protected by an ifdef, introducing an usb symbol dependency in
-the rt2x00lib module is a major inconvenience for distributions that
-package kernel modules split into individual packages.
-
-Get rid of this unnecessary dependency by calling the usb related
-function from a more suitable place.
-
-Cc: Vishal Thanki <vishalthanki at gmail.com>
-Reported-by: Felix Fietkau <nbd at nbd.name>
-Fixes: 8b4c0009313f ("rt2x00usb: Use usb anchor to manage URB")
-Signed-off-by: Stanislaw Gruszka <sgruszka at redhat.com>
-Signed-off-by: Kalle Valo <kvalo at codeaurora.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2x00dev.c | 23 ++++++++---------------
- drivers/net/wireless/ralink/rt2x00/rt2x00usb.c | 5 +++++
- 2 files changed, 13 insertions(+), 15 deletions(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
-@@ -1436,21 +1436,6 @@ void rt2x00lib_remove_dev(struct rt2x00_
- cancel_work_sync(&rt2x00dev->intf_work);
- cancel_delayed_work_sync(&rt2x00dev->autowakeup_work);
- cancel_work_sync(&rt2x00dev->sleep_work);
--#if IS_ENABLED(CPTCFG_RT2X00_LIB_USB)
-- if (rt2x00_is_usb(rt2x00dev)) {
-- usb_kill_anchored_urbs(rt2x00dev->anchor);
-- hrtimer_cancel(&rt2x00dev->txstatus_timer);
-- cancel_work_sync(&rt2x00dev->rxdone_work);
-- cancel_work_sync(&rt2x00dev->txdone_work);
-- }
--#endif
-- if (rt2x00dev->workqueue)
-- destroy_workqueue(rt2x00dev->workqueue);
--
-- /*
-- * Free the tx status fifo.
-- */
-- kfifo_free(&rt2x00dev->txstatus_fifo);
-
- /*
- * Kill the tx status tasklet.
-@@ -1466,6 +1451,14 @@ void rt2x00lib_remove_dev(struct rt2x00_
- */
- rt2x00lib_uninitialize(rt2x00dev);
-
-+ if (rt2x00dev->workqueue)
-+ destroy_workqueue(rt2x00dev->workqueue);
-+
-+ /*
-+ * Free the tx status fifo.
-+ */
-+ kfifo_free(&rt2x00dev->txstatus_fifo);
-+
- /*
- * Free extra components
- */
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c
-@@ -744,6 +744,11 @@ void rt2x00usb_uninitialize(struct rt2x0
- {
- struct data_queue *queue;
-
-+ usb_kill_anchored_urbs(rt2x00dev->anchor);
-+ hrtimer_cancel(&rt2x00dev->txstatus_timer);
-+ cancel_work_sync(&rt2x00dev->rxdone_work);
-+ cancel_work_sync(&rt2x00dev->txdone_work);
-+
- queue_for_each(rt2x00dev, queue)
- rt2x00usb_free_entries(queue);
- }
diff --git a/package/kernel/mac80211/patches/020-02-rt2x00usb-do-not-anchor-rx-and-tx-urb-s.patch b/package/kernel/mac80211/patches/020-02-rt2x00usb-do-not-anchor-rx-and-tx-urb-s.patch
deleted file mode 100644
index d096b64a8a..0000000000
--- a/package/kernel/mac80211/patches/020-02-rt2x00usb-do-not-anchor-rx-and-tx-urb-s.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From 93c7018ec16bb83399dd4db61c361a6d6aba0d5a Mon Sep 17 00:00:00 2001
-From: Stanislaw Gruszka <sgruszka at redhat.com>
-Date: Wed, 8 Feb 2017 12:18:09 +0100
-Subject: [PATCH 02/19] rt2x00usb: do not anchor rx and tx urb's
-
-We might kill TX or RX urb during rt2x00usb_flush_entry(), what can
-cause anchor list corruption like shown below:
-
-[ 2074.035633] WARNING: CPU: 2 PID: 14480 at lib/list_debug.c:33 __list_add+0xac/0xc0
-[ 2074.035634] list_add corruption. prev->next should be next (ffff88020f362c28), but was dead000000000100. (prev=ffff8801d161bb70).
-<snip>
-[ 2074.035670] Call Trace:
-[ 2074.035672] [<ffffffff813bde47>] dump_stack+0x63/0x8c
-[ 2074.035674] [<ffffffff810a2231>] __warn+0xd1/0xf0
-[ 2074.035676] [<ffffffff810a22af>] warn_slowpath_fmt+0x5f/0x80
-[ 2074.035678] [<ffffffffa073855d>] ? rt2x00usb_register_write_lock+0x3d/0x60 [rt2800usb]
-[ 2074.035679] [<ffffffff813dbe4c>] __list_add+0xac/0xc0
-[ 2074.035681] [<ffffffff81591c6c>] usb_anchor_urb+0x4c/0xa0
-[ 2074.035683] [<ffffffffa07322af>] rt2x00usb_kick_rx_entry+0xaf/0x100 [rt2x00usb]
-[ 2074.035684] [<ffffffffa0732322>] rt2x00usb_clear_entry+0x22/0x30 [rt2x00usb]
-
-To fix do not anchor TX and RX urb's, it is not needed as during
-shutdown we kill those urbs in rt2x00usb_free_entries().
-
-Cc: Vishal Thanki <vishalthanki at gmail.com>
-Fixes: 8b4c0009313f ("rt2x00usb: Use usb anchor to manage URB")
-Signed-off-by: Stanislaw Gruszka <sgruszka at redhat.com>
-Signed-off-by: Kalle Valo <kvalo at codeaurora.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2x00usb.c | 4 ----
- 1 file changed, 4 deletions(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c
-@@ -319,10 +319,8 @@ static bool rt2x00usb_kick_tx_entry(stru
- entry->skb->data, length,
- rt2x00usb_interrupt_txdone, entry);
-
-- usb_anchor_urb(entry_priv->urb, rt2x00dev->anchor);
- status = usb_submit_urb(entry_priv->urb, GFP_ATOMIC);
- if (status) {
-- usb_unanchor_urb(entry_priv->urb);
- if (status == -ENODEV)
- clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
- set_bit(ENTRY_DATA_IO_FAILED, &entry->flags);
-@@ -410,10 +408,8 @@ static bool rt2x00usb_kick_rx_entry(stru
- entry->skb->data, entry->skb->len,
- rt2x00usb_interrupt_rxdone, entry);
-
-- usb_anchor_urb(entry_priv->urb, rt2x00dev->anchor);
- status = usb_submit_urb(entry_priv->urb, GFP_ATOMIC);
- if (status) {
-- usb_unanchor_urb(entry_priv->urb);
- if (status == -ENODEV)
- clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
- set_bit(ENTRY_DATA_IO_FAILED, &entry->flags);
diff --git a/package/kernel/mac80211/patches/020-03-rt2x00usb-fix-anchor-initialization.patch b/package/kernel/mac80211/patches/020-03-rt2x00usb-fix-anchor-initialization.patch
deleted file mode 100644
index 5ff73df2a6..0000000000
--- a/package/kernel/mac80211/patches/020-03-rt2x00usb-fix-anchor-initialization.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From 0488a6121dfe6cbd44de15ea3627913b7549a1e9 Mon Sep 17 00:00:00 2001
-From: Stanislaw Gruszka <sgruszka at redhat.com>
-Date: Wed, 8 Feb 2017 12:18:10 +0100
-Subject: [PATCH 03/19] rt2x00usb: fix anchor initialization
-
-If device fail to initialize we can OOPS in rt2x00lib_remove_dev(), due
-to using uninitialized usb_anchor structure:
-
-[ 855.435820] ieee80211 phy3: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
-[ 855.435826] ieee80211 phy3: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
-[ 855.435829] ieee80211 phy3: rt2x00lib_probe_dev: Error - Failed to allocate device
-[ 855.435845] BUG: unable to handle kernel NULL pointer dereference at 0000000000000028
-[ 855.435900] IP: _raw_spin_lock_irq+0xd/0x30
-[ 855.435926] PGD 0
-[ 855.435953] Oops: 0002 [#1] SMP
-<snip>
-[ 855.437011] Call Trace:
-[ 855.437029] ? usb_kill_anchored_urbs+0x27/0xc0
-[ 855.437061] rt2x00lib_remove_dev+0x190/0x1c0 [rt2x00lib]
-[ 855.437097] rt2x00lib_probe_dev+0x246/0x7a0 [rt2x00lib]
-[ 855.437149] ? ieee80211_roc_setup+0x9e/0xd0 [mac80211]
-[ 855.437183] ? __kmalloc+0x1af/0x1f0
-[ 855.437207] ? rt2x00usb_probe+0x13d/0xc50 [rt2x00usb]
-[ 855.437240] rt2x00usb_probe+0x155/0xc50 [rt2x00usb]
-[ 855.437273] rt2800usb_probe+0x15/0x20 [rt2800usb]
-[ 855.437304] usb_probe_interface+0x159/0x2d0
-[ 855.437333] driver_probe_device+0x2bb/0x460
-
-Patch changes initialization sequence to fix the problem.
-
-Cc: Vishal Thanki <vishalthanki at gmail.com>
-Fixes: 8b4c0009313f ("rt2x00usb: Use usb anchor to manage URB")
-Signed-off-by: Stanislaw Gruszka <sgruszka at redhat.com>
-Signed-off-by: Kalle Valo <kvalo at codeaurora.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2x00usb.c | 13 ++++++++-----
- 1 file changed, 8 insertions(+), 5 deletions(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c
-@@ -825,10 +825,6 @@ int rt2x00usb_probe(struct usb_interface
- if (retval)
- goto exit_free_device;
-
-- retval = rt2x00lib_probe_dev(rt2x00dev);
-- if (retval)
-- goto exit_free_reg;
--
- rt2x00dev->anchor = devm_kmalloc(&usb_dev->dev,
- sizeof(struct usb_anchor),
- GFP_KERNEL);
-@@ -836,10 +832,17 @@ int rt2x00usb_probe(struct usb_interface
- retval = -ENOMEM;
- goto exit_free_reg;
- }
--
- init_usb_anchor(rt2x00dev->anchor);
-+
-+ retval = rt2x00lib_probe_dev(rt2x00dev);
-+ if (retval)
-+ goto exit_free_anchor;
-+
- return 0;
-
-+exit_free_anchor:
-+ usb_kill_anchored_urbs(rt2x00dev->anchor);
-+
- exit_free_reg:
- rt2x00usb_free_reg(rt2x00dev);
-
diff --git a/package/kernel/mac80211/patches/020-04-rt61pci-use-entry-directly.patch b/package/kernel/mac80211/patches/020-04-rt61pci-use-entry-directly.patch
deleted file mode 100644
index 274d8f7c3f..0000000000
--- a/package/kernel/mac80211/patches/020-04-rt61pci-use-entry-directly.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From 80a97eae304631f57ff8560f87c0b18b95321443 Mon Sep 17 00:00:00 2001
-From: Stanislaw Gruszka <sgruszka at redhat.com>
-Date: Wed, 8 Feb 2017 13:51:29 +0100
-Subject: [PATCH 04/19] rt61pci: use entry directly
-
-Signed-off-by: Stanislaw Gruszka <sgruszka at redhat.com>
-Signed-off-by: Kalle Valo <kvalo at codeaurora.org>
----
- drivers/net/wireless/ralink/rt2x00/rt61pci.c | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt61pci.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt61pci.c
-@@ -1903,8 +1903,7 @@ static void rt61pci_write_tx_desc(struct
-
- rt2x00_desc_read(txd, 5, &word);
- rt2x00_set_field32(&word, TXD_W5_PID_TYPE, entry->queue->qid);
-- rt2x00_set_field32(&word, TXD_W5_PID_SUBTYPE,
-- skbdesc->entry->entry_idx);
-+ rt2x00_set_field32(&word, TXD_W5_PID_SUBTYPE, entry->entry_idx);
- rt2x00_set_field32(&word, TXD_W5_TX_POWER,
- TXPOWER_TO_DEV(entry->queue->rt2x00dev->tx_power));
- rt2x00_set_field32(&word, TXD_W5_WAITING_DMA_DONE_INT, 1);
diff --git a/package/kernel/mac80211/patches/020-05-rt2x00-call-entry-directly-in-rt2x00_dump_frame.patch b/package/kernel/mac80211/patches/020-05-rt2x00-call-entry-directly-in-rt2x00_dump_frame.patch
deleted file mode 100644
index 241c1127bc..0000000000
--- a/package/kernel/mac80211/patches/020-05-rt2x00-call-entry-directly-in-rt2x00_dump_frame.patch
+++ /dev/null
@@ -1,158 +0,0 @@
-From 2ceb813798e1fd33e71a574771828c0f298e077b Mon Sep 17 00:00:00 2001
-From: Stanislaw Gruszka <sgruszka at redhat.com>
-Date: Wed, 8 Feb 2017 13:51:30 +0100
-Subject: [PATCH 05/19] rt2x00: call entry directly in rt2x00_dump_frame
-
-Signed-off-by: Stanislaw Gruszka <sgruszka at redhat.com>
-Signed-off-by: Kalle Valo <kvalo at codeaurora.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2400pci.c | 2 +-
- drivers/net/wireless/ralink/rt2x00/rt2500pci.c | 2 +-
- drivers/net/wireless/ralink/rt2x00/rt2500usb.c | 2 +-
- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 2 +-
- drivers/net/wireless/ralink/rt2x00/rt2x00.h | 4 ++--
- drivers/net/wireless/ralink/rt2x00/rt2x00debug.c | 7 ++++---
- drivers/net/wireless/ralink/rt2x00/rt2x00dev.c | 4 ++--
- drivers/net/wireless/ralink/rt2x00/rt2x00queue.c | 2 +-
- drivers/net/wireless/ralink/rt2x00/rt61pci.c | 2 +-
- drivers/net/wireless/ralink/rt2x00/rt73usb.c | 2 +-
- 10 files changed, 15 insertions(+), 14 deletions(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2400pci.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2400pci.c
-@@ -1200,7 +1200,7 @@ static void rt2400pci_write_beacon(struc
- /*
- * Dump beacon to userspace through debugfs.
- */
-- rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb);
-+ rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry);
- out:
- /*
- * Enable beaconing again.
---- a/drivers/net/wireless/ralink/rt2x00/rt2500pci.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2500pci.c
-@@ -1349,7 +1349,7 @@ static void rt2500pci_write_beacon(struc
- /*
- * Dump beacon to userspace through debugfs.
- */
-- rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb);
-+ rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry);
- out:
- /*
- * Enable beaconing again.
---- a/drivers/net/wireless/ralink/rt2x00/rt2500usb.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2500usb.c
-@@ -1170,7 +1170,7 @@ static void rt2500usb_write_beacon(struc
- /*
- * Dump beacon to userspace through debugfs.
- */
-- rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb);
-+ rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry);
-
- /*
- * USB devices cannot blindly pass the skb->len as the
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -1014,7 +1014,7 @@ void rt2800_write_beacon(struct queue_en
- /*
- * Dump beacon to userspace through debugfs.
- */
-- rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb);
-+ rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry);
-
- /*
- * Write entire beacon with TXWI and padding to register.
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
-@@ -1400,11 +1400,11 @@ void rt2x00queue_flush_queues(struct rt2
- */
- #ifdef CPTCFG_RT2X00_LIB_DEBUGFS
- void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev,
-- enum rt2x00_dump_type type, struct sk_buff *skb);
-+ enum rt2x00_dump_type type, struct queue_entry *entry);
- #else
- static inline void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev,
- enum rt2x00_dump_type type,
-- struct sk_buff *skb)
-+ struct queue_entry *entry)
- {
- }
- #endif /* CPTCFG_RT2X00_LIB_DEBUGFS */
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00debug.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00debug.c
-@@ -157,9 +157,10 @@ void rt2x00debug_update_crypto(struct rt
- }
-
- void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev,
-- enum rt2x00_dump_type type, struct sk_buff *skb)
-+ enum rt2x00_dump_type type, struct queue_entry *entry)
- {
- struct rt2x00debug_intf *intf = rt2x00dev->debugfs_intf;
-+ struct sk_buff *skb = entry->skb;
- struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
- struct sk_buff *skbcopy;
- struct rt2x00dump_hdr *dump_hdr;
-@@ -196,8 +197,8 @@ void rt2x00debug_dump_frame(struct rt2x0
- dump_hdr->chip_rf = cpu_to_le16(rt2x00dev->chip.rf);
- dump_hdr->chip_rev = cpu_to_le16(rt2x00dev->chip.rev);
- dump_hdr->type = cpu_to_le16(type);
-- dump_hdr->queue_index = skbdesc->entry->queue->qid;
-- dump_hdr->entry_index = skbdesc->entry->entry_idx;
-+ dump_hdr->queue_index = entry->queue->qid;
-+ dump_hdr->entry_index = entry->entry_idx;
- dump_hdr->timestamp_sec = cpu_to_le32(timestamp.tv_sec);
- dump_hdr->timestamp_usec = cpu_to_le32(timestamp.tv_usec);
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
-@@ -363,7 +363,7 @@ void rt2x00lib_txdone(struct queue_entry
- * Send frame to debugfs immediately, after this call is completed
- * we are going to overwrite the skb->cb array.
- */
-- rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_TXDONE, entry->skb);
-+ rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_TXDONE, entry);
-
- /*
- * Determine if the frame has been successfully transmitted and
-@@ -772,7 +772,7 @@ void rt2x00lib_rxdone(struct queue_entry
- */
- rt2x00link_update_stats(rt2x00dev, entry->skb, &rxdesc);
- rt2x00debug_update_crypto(rt2x00dev, &rxdesc);
-- rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_RXDONE, entry->skb);
-+ rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_RXDONE, entry);
-
- /*
- * Initialize RX status information, and send frame
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c
-@@ -544,7 +544,7 @@ static void rt2x00queue_write_tx_descrip
- * All processing on the frame has been completed, this means
- * it is now ready to be dumped to userspace through debugfs.
- */
-- rt2x00debug_dump_frame(queue->rt2x00dev, DUMP_FRAME_TX, entry->skb);
-+ rt2x00debug_dump_frame(queue->rt2x00dev, DUMP_FRAME_TX, entry);
- }
-
- static void rt2x00queue_kick_tx_queue(struct data_queue *queue,
---- a/drivers/net/wireless/ralink/rt2x00/rt61pci.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt61pci.c
-@@ -1988,7 +1988,7 @@ static void rt61pci_write_beacon(struct
- /*
- * Dump beacon to userspace through debugfs.
- */
-- rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb);
-+ rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry);
-
- /*
- * Write entire beacon with descriptor and padding to register.
---- a/drivers/net/wireless/ralink/rt2x00/rt73usb.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt73usb.c
-@@ -1557,7 +1557,7 @@ static void rt73usb_write_beacon(struct
- /*
- * Dump beacon to userspace through debugfs.
- */
-- rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb);
-+ rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry);
-
- /*
- * Write entire beacon with descriptor and padding to register.
diff --git a/package/kernel/mac80211/patches/020-06-rt2x00-remove-queue_entry-from-skbdesc.patch b/package/kernel/mac80211/patches/020-06-rt2x00-remove-queue_entry-from-skbdesc.patch
deleted file mode 100644
index c2ef9c1bb0..0000000000
--- a/package/kernel/mac80211/patches/020-06-rt2x00-remove-queue_entry-from-skbdesc.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From cf81db30a6edcca791b1bfa5348a162471121d11 Mon Sep 17 00:00:00 2001
-From: Stanislaw Gruszka <sgruszka at redhat.com>
-Date: Wed, 8 Feb 2017 13:51:31 +0100
-Subject: [PATCH 06/19] rt2x00: remove queue_entry from skbdesc
-
-queue_entry field of skbdesc is not read any more, remove it to allow
-skbdesc contain other data.
-
-Signed-off-by: Stanislaw Gruszka <sgruszka at redhat.com>
-Signed-off-by: Kalle Valo <kvalo at codeaurora.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2x00queue.c | 3 ---
- drivers/net/wireless/ralink/rt2x00/rt2x00queue.h | 2 --
- 2 files changed, 5 deletions(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c
-@@ -83,7 +83,6 @@ struct sk_buff *rt2x00queue_alloc_rxskb(
- */
- skbdesc = get_skb_frame_desc(skb);
- memset(skbdesc, 0, sizeof(*skbdesc));
-- skbdesc->entry = entry;
-
- if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_DMA)) {
- dma_addr_t skb_dma;
-@@ -689,7 +688,6 @@ int rt2x00queue_write_tx_frame(struct da
- goto out;
- }
-
-- skbdesc->entry = entry;
- entry->skb = skb;
-
- /*
-@@ -774,7 +772,6 @@ int rt2x00queue_update_beacon(struct rt2
- */
- skbdesc = get_skb_frame_desc(intf->beacon->skb);
- memset(skbdesc, 0, sizeof(*skbdesc));
-- skbdesc->entry = intf->beacon;
-
- /*
- * Send beacon to hardware.
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.h
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.h
-@@ -116,8 +116,6 @@ struct skb_frame_desc {
- __le32 iv[2];
-
- dma_addr_t skb_dma;
--
-- struct queue_entry *entry;
- };
-
- /**
diff --git a/package/kernel/mac80211/patches/020-07-rt2500usb-don-t-mark-register-accesses-as-inline.patch b/package/kernel/mac80211/patches/020-07-rt2500usb-don-t-mark-register-accesses-as-inline.patch
deleted file mode 100644
index 65496ca467..0000000000
--- a/package/kernel/mac80211/patches/020-07-rt2500usb-don-t-mark-register-accesses-as-inline.patch
+++ /dev/null
@@ -1,79 +0,0 @@
-From 7272416609126e8910b7f0d0e3dba008aa87830c Mon Sep 17 00:00:00 2001
-From: Arnd Bergmann <arnd at arndb.de>
-Date: Tue, 14 Feb 2017 22:28:33 +0100
-Subject: [PATCH 07/19] rt2500usb: don't mark register accesses as inline
-
-When CONFIG_KASAN is set, we get a rather large stack here:
-
-drivers/net/wireless/ralink/rt2x00/rt2500usb.c: In function 'rt2500usb_set_device_state':
-drivers/net/wireless/ralink/rt2x00/rt2500usb.c:1074:1: error: the frame size of 3032 bytes is larger than 100 bytes [-Werror=frame-larger-than=]
-
-If we don't force those functions to be inline, the compiler can figure this
-out better itself and not inline the functions when doing so would be harmful,
-reducing the stack size to a merge 256 bytes.
-
-Note that there is another problem that manifests in this driver, as a result
-of the typecheck() macro causing even larger stack frames.
-
-Signed-off-by: Arnd Bergmann <arnd at arndb.de>
-Signed-off-by: Kalle Valo <kvalo at codeaurora.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2500usb.c | 19 +++++--------------
- 1 file changed, 5 insertions(+), 14 deletions(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2500usb.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2500usb.c
-@@ -55,7 +55,7 @@ MODULE_PARM_DESC(nohwcrypt, "Disable har
- * If the csr_mutex is already held then the _lock variants must
- * be used instead.
- */
--static inline void rt2500usb_register_read(struct rt2x00_dev *rt2x00dev,
-+static void rt2500usb_register_read(struct rt2x00_dev *rt2x00dev,
- const unsigned int offset,
- u16 *value)
- {
-@@ -66,7 +66,7 @@ static inline void rt2500usb_register_re
- *value = le16_to_cpu(reg);
- }
-
--static inline void rt2500usb_register_read_lock(struct rt2x00_dev *rt2x00dev,
-+static void rt2500usb_register_read_lock(struct rt2x00_dev *rt2x00dev,
- const unsigned int offset,
- u16 *value)
- {
-@@ -77,16 +77,7 @@ static inline void rt2500usb_register_re
- *value = le16_to_cpu(reg);
- }
-
--static inline void rt2500usb_register_multiread(struct rt2x00_dev *rt2x00dev,
-- const unsigned int offset,
-- void *value, const u16 length)
--{
-- rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ,
-- USB_VENDOR_REQUEST_IN, offset,
-- value, length);
--}
--
--static inline void rt2500usb_register_write(struct rt2x00_dev *rt2x00dev,
-+static void rt2500usb_register_write(struct rt2x00_dev *rt2x00dev,
- const unsigned int offset,
- u16 value)
- {
-@@ -96,7 +87,7 @@ static inline void rt2500usb_register_wr
- ®, sizeof(reg));
- }
-
--static inline void rt2500usb_register_write_lock(struct rt2x00_dev *rt2x00dev,
-+static void rt2500usb_register_write_lock(struct rt2x00_dev *rt2x00dev,
- const unsigned int offset,
- u16 value)
- {
-@@ -106,7 +97,7 @@ static inline void rt2500usb_register_wr
- ®, sizeof(reg), REGISTER_TIMEOUT);
- }
-
--static inline void rt2500usb_register_multiwrite(struct rt2x00_dev *rt2x00dev,
-+static void rt2500usb_register_multiwrite(struct rt2x00_dev *rt2x00dev,
- const unsigned int offset,
- void *value, const u16 length)
- {
diff --git a/package/kernel/mac80211/patches/020-08-rt2x00-rt2800lib-move-rt2800_drv_data-declaration-in.patch b/package/kernel/mac80211/patches/020-08-rt2x00-rt2800lib-move-rt2800_drv_data-declaration-in.patch
deleted file mode 100644
index 8b61235e11..0000000000
--- a/package/kernel/mac80211/patches/020-08-rt2x00-rt2800lib-move-rt2800_drv_data-declaration-in.patch
+++ /dev/null
@@ -1,87 +0,0 @@
-From 96609f366c6f792421e1939c5c834abbe24eb88a Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg at openwrt.org>
-Date: Wed, 15 Feb 2017 10:25:04 +0100
-Subject: [PATCH 08/19] rt2x00: rt2800lib: move rt2800_drv_data declaration
- into rt2800lib.h
-
-The rt2800_drv_data structure contains driver specific
-information. Move the declaration into the rt2800lib.h
-header which is a more logical place for it. Also fix
-the comment style to avoid checkpatch warning.
-
-The patch contains no functional changes, it is in
-preparation for the next patch.
-
-Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
-Signed-off-by: Daniel Golle <daniel at makrotopia.org>
-Signed-off-by: Stanislaw Gruszka <sgruszka at redhat.com>
-Signed-off-by: Kalle Valo <kvalo at codeaurora.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2800.h | 25 -------------------------
- drivers/net/wireless/ralink/rt2x00/rt2800lib.h | 23 +++++++++++++++++++++++
- 2 files changed, 23 insertions(+), 25 deletions(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800.h
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h
-@@ -2987,29 +2987,4 @@ enum rt2800_eeprom_word {
- */
- #define BCN_TBTT_OFFSET 64
-
--/*
-- * Hardware has 255 WCID table entries. First 32 entries are reserved for
-- * shared keys. Since parts of the pairwise key table might be shared with
-- * the beacon frame buffers 6 & 7 we could only use the first 222 entries.
-- */
--#define WCID_START 33
--#define WCID_END 222
--#define STA_IDS_SIZE (WCID_END - WCID_START + 2)
--
--/*
-- * RT2800 driver data structure
-- */
--struct rt2800_drv_data {
-- u8 calibration_bw20;
-- u8 calibration_bw40;
-- u8 bbp25;
-- u8 bbp26;
-- u8 txmixer_gain_24g;
-- u8 txmixer_gain_5g;
-- u8 max_psdu;
-- unsigned int tbtt_tick;
-- unsigned int ampdu_factor_cnt[4];
-- DECLARE_BITMAP(sta_ids, STA_IDS_SIZE);
--};
--
- #endif /* RT2800_H */
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
-@@ -20,6 +20,29 @@
- #ifndef RT2800LIB_H
- #define RT2800LIB_H
-
-+/*
-+ * Hardware has 255 WCID table entries. First 32 entries are reserved for
-+ * shared keys. Since parts of the pairwise key table might be shared with
-+ * the beacon frame buffers 6 & 7 we could only use the first 222 entries.
-+ */
-+#define WCID_START 33
-+#define WCID_END 222
-+#define STA_IDS_SIZE (WCID_END - WCID_START + 2)
-+
-+/* RT2800 driver data structure */
-+struct rt2800_drv_data {
-+ u8 calibration_bw20;
-+ u8 calibration_bw40;
-+ u8 bbp25;
-+ u8 bbp26;
-+ u8 txmixer_gain_24g;
-+ u8 txmixer_gain_5g;
-+ u8 max_psdu;
-+ unsigned int tbtt_tick;
-+ unsigned int ampdu_factor_cnt[4];
-+ DECLARE_BITMAP(sta_ids, STA_IDS_SIZE);
-+};
-+
- struct rt2800_ops {
- void (*register_read)(struct rt2x00_dev *rt2x00dev,
- const unsigned int offset, u32 *value);
diff --git a/package/kernel/mac80211/patches/020-09-rt2800-identify-station-based-on-status-WCID.patch b/package/kernel/mac80211/patches/020-09-rt2800-identify-station-based-on-status-WCID.patch
deleted file mode 100644
index 922c35833c..0000000000
--- a/package/kernel/mac80211/patches/020-09-rt2800-identify-station-based-on-status-WCID.patch
+++ /dev/null
@@ -1,85 +0,0 @@
-From a13d985f26f6df07d5c5c0e190477628e236babc Mon Sep 17 00:00:00 2001
-From: Stanislaw Gruszka <sgruszka at redhat.com>
-Date: Wed, 15 Feb 2017 10:25:05 +0100
-Subject: [PATCH 09/19] rt2800: identify station based on status WCID
-
-Add framework to identify sta based on tx status WCID. This is currently
-not used, will start be utilized in the future patch.
-
-Signed-off-by: Stanislaw Gruszka <sgruszka at redhat.com>
-Signed-off-by: Kalle Valo <kvalo at codeaurora.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 5 +++++
- drivers/net/wireless/ralink/rt2x00/rt2800lib.h | 1 +
- drivers/net/wireless/ralink/rt2x00/rt2x00queue.h | 3 ++-
- 3 files changed, 8 insertions(+), 1 deletion(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -855,11 +855,13 @@ EXPORT_SYMBOL_GPL(rt2800_process_rxwi);
- void rt2800_txdone_entry(struct queue_entry *entry, u32 status, __le32 *txwi)
- {
- struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
-+ struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
- struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
- struct txdone_entry_desc txdesc;
- u32 word;
- u16 mcs, real_mcs;
- int aggr, ampdu;
-+ int wcid;
-
- /*
- * Obtain the status about this packet.
-@@ -872,6 +874,7 @@ void rt2800_txdone_entry(struct queue_en
-
- real_mcs = rt2x00_get_field32(status, TX_STA_FIFO_MCS);
- aggr = rt2x00_get_field32(status, TX_STA_FIFO_TX_AGGRE);
-+ wcid = rt2x00_get_field32(status, TX_STA_FIFO_WCID);
-
- /*
- * If a frame was meant to be sent as a single non-aggregated MPDU
-@@ -1468,6 +1471,7 @@ int rt2800_sta_add(struct rt2x00_dev *rt
- return 0;
-
- __set_bit(wcid - WCID_START, drv_data->sta_ids);
-+ drv_data->wcid_to_sta[wcid - WCID_START] = sta;
-
- /*
- * Clean up WCID attributes and write STA address to the device.
-@@ -1498,6 +1502,7 @@ int rt2800_sta_remove(struct rt2x00_dev
- * get renewed when the WCID is reused.
- */
- rt2800_config_wcid(rt2x00dev, NULL, wcid);
-+ drv_data->wcid_to_sta[wcid - WCID_START] = NULL;
- __clear_bit(wcid - WCID_START, drv_data->sta_ids);
-
- return 0;
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
-@@ -41,6 +41,7 @@ struct rt2800_drv_data {
- unsigned int tbtt_tick;
- unsigned int ampdu_factor_cnt[4];
- DECLARE_BITMAP(sta_ids, STA_IDS_SIZE);
-+ struct ieee80211_sta *wcid_to_sta[STA_IDS_SIZE];
- };
-
- struct rt2800_ops {
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.h
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.h
-@@ -102,7 +102,7 @@ enum skb_frame_desc_flags {
- * of the scope of the skb->data pointer.
- * @iv: IV/EIV data used during encryption/decryption.
- * @skb_dma: (PCI-only) the DMA address associated with the sk buffer.
-- * @entry: The entry to which this sk buffer belongs.
-+ * @sta: The station where sk buffer was sent.
- */
- struct skb_frame_desc {
- u8 flags;
-@@ -116,6 +116,7 @@ struct skb_frame_desc {
- __le32 iv[2];
-
- dma_addr_t skb_dma;
-+ struct ieee80211_sta *sta;
- };
-
- /**
diff --git a/package/kernel/mac80211/patches/020-10-rt2x00-separte-filling-tx-status-from-rt2x00lib_txdo.patch b/package/kernel/mac80211/patches/020-10-rt2x00-separte-filling-tx-status-from-rt2x00lib_txdo.patch
deleted file mode 100644
index 84f2732b22..0000000000
--- a/package/kernel/mac80211/patches/020-10-rt2x00-separte-filling-tx-status-from-rt2x00lib_txdo.patch
+++ /dev/null
@@ -1,173 +0,0 @@
-From 5edb05afebba8f488a30db29550e55c42eea6d6a Mon Sep 17 00:00:00 2001
-From: Stanislaw Gruszka <sgruszka at redhat.com>
-Date: Wed, 15 Feb 2017 10:25:06 +0100
-Subject: [PATCH 10/19] rt2x00: separte filling tx status from rt2x00lib_txdone
-
-This makes rt2x00lib_txdone a bit simpler and will allow to reuse code
-in different variant of txdone which I'm preparing.
-
-Signed-off-by: Stanislaw Gruszka <sgruszka at redhat.com>
-Signed-off-by: Kalle Valo <kvalo at codeaurora.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2x00dev.c | 141 +++++++++++++------------
- 1 file changed, 76 insertions(+), 65 deletions(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
-@@ -313,73 +313,14 @@ static inline int rt2x00lib_txdone_bar_s
- return ret;
- }
-
--void rt2x00lib_txdone(struct queue_entry *entry,
-- struct txdone_entry_desc *txdesc)
-+static void rt2x00lib_fill_tx_status(struct rt2x00_dev *rt2x00dev,
-+ struct ieee80211_tx_info *tx_info,
-+ struct skb_frame_desc *skbdesc,
-+ struct txdone_entry_desc *txdesc,
-+ bool success)
- {
-- struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
-- struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
-- struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
-- unsigned int header_length, i;
- u8 rate_idx, rate_flags, retry_rates;
-- u8 skbdesc_flags = skbdesc->flags;
-- bool success;
--
-- /*
-- * Unmap the skb.
-- */
-- rt2x00queue_unmap_skb(entry);
--
-- /*
-- * Remove the extra tx headroom from the skb.
-- */
-- skb_pull(entry->skb, rt2x00dev->extra_tx_headroom);
--
-- /*
-- * Signal that the TX descriptor is no longer in the skb.
-- */
-- skbdesc->flags &= ~SKBDESC_DESC_IN_SKB;
--
-- /*
-- * Determine the length of 802.11 header.
-- */
-- header_length = ieee80211_get_hdrlen_from_skb(entry->skb);
--
-- /*
-- * Remove L2 padding which was added during
-- */
-- if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_L2PAD))
-- rt2x00queue_remove_l2pad(entry->skb, header_length);
--
-- /*
-- * If the IV/EIV data was stripped from the frame before it was
-- * passed to the hardware, we should now reinsert it again because
-- * mac80211 will expect the same data to be present it the
-- * frame as it was passed to us.
-- */
-- if (rt2x00_has_cap_hw_crypto(rt2x00dev))
-- rt2x00crypto_tx_insert_iv(entry->skb, header_length);
--
-- /*
-- * Send frame to debugfs immediately, after this call is completed
-- * we are going to overwrite the skb->cb array.
-- */
-- rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_TXDONE, entry);
--
-- /*
-- * Determine if the frame has been successfully transmitted and
-- * remove BARs from our check list while checking for their
-- * TX status.
-- */
-- success =
-- rt2x00lib_txdone_bar_status(entry) ||
-- test_bit(TXDONE_SUCCESS, &txdesc->flags) ||
-- test_bit(TXDONE_UNKNOWN, &txdesc->flags);
--
-- /*
-- * Update TX statistics.
-- */
-- rt2x00dev->link.qual.tx_success += success;
-- rt2x00dev->link.qual.tx_failed += !success;
-+ int i;
-
- rate_idx = skbdesc->tx_rate_idx;
- rate_flags = skbdesc->tx_rate_flags;
-@@ -448,6 +389,76 @@ void rt2x00lib_txdone(struct queue_entry
- else
- rt2x00dev->low_level_stats.dot11RTSFailureCount++;
- }
-+}
-+
-+void rt2x00lib_txdone(struct queue_entry *entry,
-+ struct txdone_entry_desc *txdesc)
-+{
-+ struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
-+ struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
-+ struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
-+ u8 skbdesc_flags = skbdesc->flags;
-+ unsigned int header_length;
-+ bool success;
-+
-+ /*
-+ * Unmap the skb.
-+ */
-+ rt2x00queue_unmap_skb(entry);
-+
-+ /*
-+ * Remove the extra tx headroom from the skb.
-+ */
-+ skb_pull(entry->skb, rt2x00dev->extra_tx_headroom);
-+
-+ /*
-+ * Signal that the TX descriptor is no longer in the skb.
-+ */
-+ skbdesc->flags &= ~SKBDESC_DESC_IN_SKB;
-+
-+ /*
-+ * Determine the length of 802.11 header.
-+ */
-+ header_length = ieee80211_get_hdrlen_from_skb(entry->skb);
-+
-+ /*
-+ * Remove L2 padding which was added during
-+ */
-+ if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_L2PAD))
-+ rt2x00queue_remove_l2pad(entry->skb, header_length);
-+
-+ /*
-+ * If the IV/EIV data was stripped from the frame before it was
-+ * passed to the hardware, we should now reinsert it again because
-+ * mac80211 will expect the same data to be present it the
-+ * frame as it was passed to us.
-+ */
-+ if (rt2x00_has_cap_hw_crypto(rt2x00dev))
-+ rt2x00crypto_tx_insert_iv(entry->skb, header_length);
-+
-+ /*
-+ * Send frame to debugfs immediately, after this call is completed
-+ * we are going to overwrite the skb->cb array.
-+ */
-+ rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_TXDONE, entry);
-+
-+ /*
-+ * Determine if the frame has been successfully transmitted and
-+ * remove BARs from our check list while checking for their
-+ * TX status.
-+ */
-+ success =
-+ rt2x00lib_txdone_bar_status(entry) ||
-+ test_bit(TXDONE_SUCCESS, &txdesc->flags) ||
-+ test_bit(TXDONE_UNKNOWN, &txdesc->flags);
-+
-+ /*
-+ * Update TX statistics.
-+ */
-+ rt2x00dev->link.qual.tx_success += success;
-+ rt2x00dev->link.qual.tx_failed += !success;
-+
-+ rt2x00lib_fill_tx_status(rt2x00dev, tx_info, skbdesc, txdesc, success);
-
- /*
- * Only send the status report to mac80211 when it's a frame
diff --git a/package/kernel/mac80211/patches/020-11-rt2x00-separte-clearing-entry-from-rt2x00lib_txdone.patch b/package/kernel/mac80211/patches/020-11-rt2x00-separte-clearing-entry-from-rt2x00lib_txdone.patch
deleted file mode 100644
index e1359397ba..0000000000
--- a/package/kernel/mac80211/patches/020-11-rt2x00-separte-clearing-entry-from-rt2x00lib_txdone.patch
+++ /dev/null
@@ -1,83 +0,0 @@
-From 56646adf9cd60b488ddc5633a2d9aa1f30efa5db Mon Sep 17 00:00:00 2001
-From: Stanislaw Gruszka <sgruszka at redhat.com>
-Date: Wed, 15 Feb 2017 10:25:07 +0100
-Subject: [PATCH 11/19] rt2x00: separte clearing entry from rt2x00lib_txdone
-
-This makes rt2x00lib_txdone a bit simpler and will allow to reuse
-code in different variant of txdone which I'm preparing.
-
-Signed-off-by: Stanislaw Gruszka <sgruszka at redhat.com>
-Signed-off-by: Kalle Valo <kvalo at codeaurora.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2x00dev.c | 51 +++++++++++++++-----------
- 1 file changed, 29 insertions(+), 22 deletions(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
-@@ -391,6 +391,32 @@ static void rt2x00lib_fill_tx_status(str
- }
- }
-
-+static void rt2x00lib_clear_entry(struct rt2x00_dev *rt2x00dev,
-+ struct queue_entry *entry)
-+{
-+ /*
-+ * Make this entry available for reuse.
-+ */
-+ entry->skb = NULL;
-+ entry->flags = 0;
-+
-+ rt2x00dev->ops->lib->clear_entry(entry);
-+
-+ rt2x00queue_index_inc(entry, Q_INDEX_DONE);
-+
-+ /*
-+ * If the data queue was below the threshold before the txdone
-+ * handler we must make sure the packet queue in the mac80211 stack
-+ * is reenabled when the txdone handler has finished. This has to be
-+ * serialized with rt2x00mac_tx(), otherwise we can wake up queue
-+ * before it was stopped.
-+ */
-+ spin_lock_bh(&entry->queue->tx_lock);
-+ if (!rt2x00queue_threshold(entry->queue))
-+ rt2x00queue_unpause_queue(entry->queue);
-+ spin_unlock_bh(&entry->queue->tx_lock);
-+}
-+
- void rt2x00lib_txdone(struct queue_entry *entry,
- struct txdone_entry_desc *txdesc)
- {
-@@ -471,30 +497,11 @@ void rt2x00lib_txdone(struct queue_entry
- ieee80211_tx_status(rt2x00dev->hw, entry->skb);
- else
- ieee80211_tx_status_ni(rt2x00dev->hw, entry->skb);
-- } else
-+ } else {
- dev_kfree_skb_any(entry->skb);
-+ }
-
-- /*
-- * Make this entry available for reuse.
-- */
-- entry->skb = NULL;
-- entry->flags = 0;
--
-- rt2x00dev->ops->lib->clear_entry(entry);
--
-- rt2x00queue_index_inc(entry, Q_INDEX_DONE);
--
-- /*
-- * If the data queue was below the threshold before the txdone
-- * handler we must make sure the packet queue in the mac80211 stack
-- * is reenabled when the txdone handler has finished. This has to be
-- * serialized with rt2x00mac_tx(), otherwise we can wake up queue
-- * before it was stopped.
-- */
-- spin_lock_bh(&entry->queue->tx_lock);
-- if (!rt2x00queue_threshold(entry->queue))
-- rt2x00queue_unpause_queue(entry->queue);
-- spin_unlock_bh(&entry->queue->tx_lock);
-+ rt2x00lib_clear_entry(rt2x00dev, entry);
- }
- EXPORT_SYMBOL_GPL(rt2x00lib_txdone);
-
diff --git a/package/kernel/mac80211/patches/020-12-rt2x00-add-txdone-nomatch-function.patch b/package/kernel/mac80211/patches/020-12-rt2x00-add-txdone-nomatch-function.patch
deleted file mode 100644
index 60edb08e75..0000000000
--- a/package/kernel/mac80211/patches/020-12-rt2x00-add-txdone-nomatch-function.patch
+++ /dev/null
@@ -1,85 +0,0 @@
-From a09305d052166cb489402a63a5d275e954e0b923 Mon Sep 17 00:00:00 2001
-From: Stanislaw Gruszka <sgruszka at redhat.com>
-Date: Wed, 15 Feb 2017 10:25:08 +0100
-Subject: [PATCH 12/19] rt2x00: add txdone nomatch function
-
-This txdone nomatch function will be used when we get status from the HW,
-but we could not match it with any sent skb.
-
-Signed-off-by: Stanislaw Gruszka <sgruszka at redhat.com>
-Signed-off-by: Kalle Valo <kvalo at codeaurora.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2x00.h | 2 ++
- drivers/net/wireless/ralink/rt2x00/rt2x00dev.c | 50 ++++++++++++++++++++++++++
- 2 files changed, 52 insertions(+)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
-@@ -1425,6 +1425,8 @@ void rt2x00lib_dmastart(struct queue_ent
- void rt2x00lib_dmadone(struct queue_entry *entry);
- void rt2x00lib_txdone(struct queue_entry *entry,
- struct txdone_entry_desc *txdesc);
-+void rt2x00lib_txdone_nomatch(struct queue_entry *entry,
-+ struct txdone_entry_desc *txdesc);
- void rt2x00lib_txdone_noinfo(struct queue_entry *entry, u32 status);
- void rt2x00lib_rxdone(struct queue_entry *entry, gfp_t gfp);
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
-@@ -417,6 +417,56 @@ static void rt2x00lib_clear_entry(struct
- spin_unlock_bh(&entry->queue->tx_lock);
- }
-
-+void rt2x00lib_txdone_nomatch(struct queue_entry *entry,
-+ struct txdone_entry_desc *txdesc)
-+{
-+ struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
-+ struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
-+ struct ieee80211_tx_info txinfo = {};
-+ bool success;
-+
-+ /*
-+ * Unmap the skb.
-+ */
-+ rt2x00queue_unmap_skb(entry);
-+
-+ /*
-+ * Signal that the TX descriptor is no longer in the skb.
-+ */
-+ skbdesc->flags &= ~SKBDESC_DESC_IN_SKB;
-+
-+ /*
-+ * Send frame to debugfs immediately, after this call is completed
-+ * we are going to overwrite the skb->cb array.
-+ */
-+ rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_TXDONE, entry);
-+
-+ /*
-+ * Determine if the frame has been successfully transmitted and
-+ * remove BARs from our check list while checking for their
-+ * TX status.
-+ */
-+ success =
-+ rt2x00lib_txdone_bar_status(entry) ||
-+ test_bit(TXDONE_SUCCESS, &txdesc->flags);
-+
-+ if (!test_bit(TXDONE_UNKNOWN, &txdesc->flags)) {
-+ /*
-+ * Update TX statistics.
-+ */
-+ rt2x00dev->link.qual.tx_success += success;
-+ rt2x00dev->link.qual.tx_failed += !success;
-+
-+ rt2x00lib_fill_tx_status(rt2x00dev, &txinfo, skbdesc, txdesc,
-+ success);
-+ ieee80211_tx_status_noskb(rt2x00dev->hw, skbdesc->sta, &txinfo);
-+ }
-+
-+ dev_kfree_skb_any(entry->skb);
-+ rt2x00lib_clear_entry(rt2x00dev, entry);
-+}
-+EXPORT_SYMBOL_GPL(rt2x00lib_txdone_nomatch);
-+
- void rt2x00lib_txdone(struct queue_entry *entry,
- struct txdone_entry_desc *txdesc)
- {
diff --git a/package/kernel/mac80211/patches/020-13-rt2x00-fixup-fill_tx_status-for-nomatch-case.patch b/package/kernel/mac80211/patches/020-13-rt2x00-fixup-fill_tx_status-for-nomatch-case.patch
deleted file mode 100644
index a0cc37f491..0000000000
--- a/package/kernel/mac80211/patches/020-13-rt2x00-fixup-fill_tx_status-for-nomatch-case.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From ec80ad70d778af7665992672896633ebd3b02ac8 Mon Sep 17 00:00:00 2001
-From: Stanislaw Gruszka <sgruszka at redhat.com>
-Date: Wed, 15 Feb 2017 10:25:09 +0100
-Subject: [PATCH 13/19] rt2x00: fixup fill_tx_status for nomatch case
-
-Add bits rt2x00lib_fill_tx_status() when filling status in nomatch
-case and hopefully do not break the function for existing cases.
-
-Signed-off-by: Stanislaw Gruszka <sgruszka at redhat.com>
-Signed-off-by: Kalle Valo <kvalo at codeaurora.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2x00dev.c | 6 +++++-
- drivers/net/wireless/ralink/rt2x00/rt2x00queue.h | 1 +
- 2 files changed, 6 insertions(+), 1 deletion(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
-@@ -357,6 +357,9 @@ static void rt2x00lib_fill_tx_status(str
- if (i < (IEEE80211_TX_MAX_RATES - 1))
- tx_info->status.rates[i].idx = -1; /* terminate */
-
-+ if (test_bit(TXDONE_NO_ACK_REQ, &txdesc->flags))
-+ tx_info->flags |= IEEE80211_TX_CTL_NO_ACK;
-+
- if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) {
- if (success)
- tx_info->flags |= IEEE80211_TX_STAT_ACK;
-@@ -375,7 +378,8 @@ static void rt2x00lib_fill_tx_status(str
- */
- if (test_bit(TXDONE_AMPDU, &txdesc->flags) ||
- tx_info->flags & IEEE80211_TX_CTL_AMPDU) {
-- tx_info->flags |= IEEE80211_TX_STAT_AMPDU;
-+ tx_info->flags |= IEEE80211_TX_STAT_AMPDU |
-+ IEEE80211_TX_CTL_AMPDU;
- tx_info->status.ampdu_len = 1;
- tx_info->status.ampdu_ack_len = success ? 1 : 0;
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.h
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.h
-@@ -215,6 +215,7 @@ enum txdone_entry_desc_flags {
- TXDONE_FAILURE,
- TXDONE_EXCESSIVE_RETRY,
- TXDONE_AMPDU,
-+ TXDONE_NO_ACK_REQ,
- };
-
- /**
diff --git a/package/kernel/mac80211/patches/020-14-rt2x00-use-txdone_nomatch-on-rt2800usb.patch b/package/kernel/mac80211/patches/020-14-rt2x00-use-txdone_nomatch-on-rt2800usb.patch
deleted file mode 100644
index 1e23ef7bcb..0000000000
--- a/package/kernel/mac80211/patches/020-14-rt2x00-use-txdone_nomatch-on-rt2800usb.patch
+++ /dev/null
@@ -1,180 +0,0 @@
-From 293dff78ee058ec1e0b90e05a803c512b6a2097f Mon Sep 17 00:00:00 2001
-From: Stanislaw Gruszka <sgruszka at redhat.com>
-Date: Wed, 15 Feb 2017 10:25:10 +0100
-Subject: [PATCH 14/19] rt2x00: use txdone_nomatch on rt2800usb
-
-If we do not match skb entry, provide tx status via nomatch procedure.
-
-Currently in that case we do rt2x00lib_txdone_noinfo(TXDONE_NOINFO),
-which actually assume that entry->skb was posted without retries and
-provide rate saved in skb desc as successful. Patch changed that to
-rate read from TX_STAT_FIFO, however still do not provide correct
-number of retries.
-
-On SoC/PCI devices we keep providing status via standard txdone
-procedure, no change in those devices, though we should thing about it.
-
-Signed-off-by: Stanislaw Gruszka <sgruszka at redhat.com>
-Signed-off-by: Kalle Valo <kvalo at codeaurora.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 31 ++++++++++++++++++++-----
- drivers/net/wireless/ralink/rt2x00/rt2800lib.h | 3 ++-
- drivers/net/wireless/ralink/rt2x00/rt2800mmio.c | 2 +-
- drivers/net/wireless/ralink/rt2x00/rt2800usb.c | 18 ++++++--------
- 4 files changed, 35 insertions(+), 19 deletions(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -852,7 +852,8 @@ void rt2800_process_rxwi(struct queue_en
- }
- EXPORT_SYMBOL_GPL(rt2800_process_rxwi);
-
--void rt2800_txdone_entry(struct queue_entry *entry, u32 status, __le32 *txwi)
-+void rt2800_txdone_entry(struct queue_entry *entry, u32 status, __le32 *txwi,
-+ bool match)
- {
- struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
- struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
-@@ -860,8 +861,7 @@ void rt2800_txdone_entry(struct queue_en
- struct txdone_entry_desc txdesc;
- u32 word;
- u16 mcs, real_mcs;
-- int aggr, ampdu;
-- int wcid;
-+ int aggr, ampdu, wcid, ack_req;
-
- /*
- * Obtain the status about this packet.
-@@ -875,6 +875,7 @@ void rt2800_txdone_entry(struct queue_en
- real_mcs = rt2x00_get_field32(status, TX_STA_FIFO_MCS);
- aggr = rt2x00_get_field32(status, TX_STA_FIFO_TX_AGGRE);
- wcid = rt2x00_get_field32(status, TX_STA_FIFO_WCID);
-+ ack_req = rt2x00_get_field32(status, TX_STA_FIFO_TX_ACK_REQUIRED);
-
- /*
- * If a frame was meant to be sent as a single non-aggregated MPDU
-@@ -891,8 +892,12 @@ void rt2800_txdone_entry(struct queue_en
- * Hence, replace the requested rate with the real tx rate to not
- * confuse the rate control algortihm by providing clearly wrong
- * data.
-- */
-- if (unlikely(aggr == 1 && ampdu == 0 && real_mcs != mcs)) {
-+ *
-+ * FIXME: if we do not find matching entry, we tell that frame was
-+ * posted without any retries. We need to find a way to fix that
-+ * and provide retry count.
-+ */
-+ if (unlikely((aggr == 1 && ampdu == 0 && real_mcs != mcs)) || !match) {
- skbdesc->tx_rate_idx = real_mcs;
- mcs = real_mcs;
- }
-@@ -900,6 +905,9 @@ void rt2800_txdone_entry(struct queue_en
- if (aggr == 1 || ampdu == 1)
- __set_bit(TXDONE_AMPDU, &txdesc.flags);
-
-+ if (!ack_req)
-+ __set_bit(TXDONE_NO_ACK_REQ, &txdesc.flags);
-+
- /*
- * Ralink has a retry mechanism using a global fallback
- * table. We setup this fallback table to try the immediate
-@@ -931,7 +939,18 @@ void rt2800_txdone_entry(struct queue_en
- if (txdesc.retry)
- __set_bit(TXDONE_FALLBACK, &txdesc.flags);
-
-- rt2x00lib_txdone(entry, &txdesc);
-+ if (!match) {
-+ /* RCU assures non-null sta will not be freed by mac80211. */
-+ rcu_read_lock();
-+ if (likely(wcid >= WCID_START && wcid <= WCID_END))
-+ skbdesc->sta = drv_data->wcid_to_sta[wcid - WCID_START];
-+ else
-+ skbdesc->sta = NULL;
-+ rt2x00lib_txdone_nomatch(entry, &txdesc);
-+ rcu_read_unlock();
-+ } else {
-+ rt2x00lib_txdone(entry, &txdesc);
-+ }
- }
- EXPORT_SYMBOL_GPL(rt2800_txdone_entry);
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
-@@ -191,7 +191,8 @@ void rt2800_write_tx_data(struct queue_e
- struct txentry_desc *txdesc);
- void rt2800_process_rxwi(struct queue_entry *entry, struct rxdone_entry_desc *txdesc);
-
--void rt2800_txdone_entry(struct queue_entry *entry, u32 status, __le32* txwi);
-+void rt2800_txdone_entry(struct queue_entry *entry, u32 status, __le32 *txwi,
-+ bool match);
-
- void rt2800_write_beacon(struct queue_entry *entry, struct txentry_desc *txdesc);
- void rt2800_clear_beacon(struct queue_entry *entry);
---- a/drivers/net/wireless/ralink/rt2x00/rt2800mmio.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800mmio.c
-@@ -239,7 +239,7 @@ static bool rt2800mmio_txdone_release_en
- {
- if (test_bit(ENTRY_DATA_STATUS_SET, &entry->flags)) {
- rt2800_txdone_entry(entry, entry->status,
-- rt2800mmio_get_txwi(entry));
-+ rt2800mmio_get_txwi(entry), true);
- return false;
- }
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800usb.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800usb.c
-@@ -501,8 +501,7 @@ static int rt2800usb_get_tx_data_len(str
- /*
- * TX control handlers
- */
--static enum txdone_entry_desc_flags
--rt2800usb_txdone_entry_check(struct queue_entry *entry, u32 reg)
-+static bool rt2800usb_txdone_entry_check(struct queue_entry *entry, u32 reg)
- {
- __le32 *txwi;
- u32 word;
-@@ -515,7 +514,7 @@ rt2800usb_txdone_entry_check(struct queu
- * frame.
- */
- if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags))
-- return TXDONE_FAILURE;
-+ return false;
-
- wcid = rt2x00_get_field32(reg, TX_STA_FIFO_WCID);
- ack = rt2x00_get_field32(reg, TX_STA_FIFO_TX_ACK_REQUIRED);
-@@ -537,10 +536,10 @@ rt2800usb_txdone_entry_check(struct queu
- rt2x00_dbg(entry->queue->rt2x00dev,
- "TX status report missed for queue %d entry %d\n",
- entry->queue->qid, entry->entry_idx);
-- return TXDONE_UNKNOWN;
-+ return false;
- }
-
-- return TXDONE_SUCCESS;
-+ return true;
- }
-
- static void rt2800usb_txdone(struct rt2x00_dev *rt2x00dev)
-@@ -549,7 +548,7 @@ static void rt2800usb_txdone(struct rt2x
- struct queue_entry *entry;
- u32 reg;
- u8 qid;
-- enum txdone_entry_desc_flags done_status;
-+ bool match;
-
- while (kfifo_get(&rt2x00dev->txstatus_fifo, ®)) {
- /*
-@@ -574,11 +573,8 @@ static void rt2800usb_txdone(struct rt2x
- break;
- }
-
-- done_status = rt2800usb_txdone_entry_check(entry, reg);
-- if (likely(done_status == TXDONE_SUCCESS))
-- rt2800_txdone_entry(entry, reg, rt2800usb_get_txwi(entry));
-- else
-- rt2x00lib_txdone_noinfo(entry, done_status);
-+ match = rt2800usb_txdone_entry_check(entry, reg);
-+ rt2800_txdone_entry(entry, reg, rt2800usb_get_txwi(entry), match);
- }
- }
-
diff --git a/package/kernel/mac80211/patches/020-15-rt2800-status-based-rate-flags-for-nomatch-case.patch b/package/kernel/mac80211/patches/020-15-rt2800-status-based-rate-flags-for-nomatch-case.patch
deleted file mode 100644
index 37838e8895..0000000000
--- a/package/kernel/mac80211/patches/020-15-rt2800-status-based-rate-flags-for-nomatch-case.patch
+++ /dev/null
@@ -1,81 +0,0 @@
-From 9d7a7a4d2b02bcd30fb5fe4270278212353cc332 Mon Sep 17 00:00:00 2001
-From: Stanislaw Gruszka <sgruszka at redhat.com>
-Date: Wed, 15 Feb 2017 10:25:11 +0100
-Subject: [PATCH 15/19] rt2800: status based rate flags for nomatch case
-
-We use skb_desc->tx_rate_flags from entry as rate[].flags even if
-skb does not match status. Patch corrects flags and also fixes
-mcs for legacy rates.
-
-rt2800_rate_from_status() is based on Felix's mt76
-mt76x2_mac_process_tx_rate() function.
-
-Signed-off-by: Stanislaw Gruszka <sgruszka at redhat.com>
-Signed-off-by: Kalle Valo <kvalo at codeaurora.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2800.h | 2 ++
- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 35 +++++++++++++++++++++++++-
- 2 files changed, 36 insertions(+), 1 deletion(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800.h
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h
-@@ -1760,6 +1760,8 @@
- #define TX_STA_FIFO_WCID FIELD32(0x0000ff00)
- #define TX_STA_FIFO_SUCCESS_RATE FIELD32(0xffff0000)
- #define TX_STA_FIFO_MCS FIELD32(0x007f0000)
-+#define TX_STA_FIFO_BW FIELD32(0x00800000)
-+#define TX_STA_FIFO_SGI FIELD32(0x01000000)
- #define TX_STA_FIFO_PHYMODE FIELD32(0xc0000000)
-
- /*
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -852,6 +852,39 @@ void rt2800_process_rxwi(struct queue_en
- }
- EXPORT_SYMBOL_GPL(rt2800_process_rxwi);
-
-+static void rt2800_rate_from_status(struct skb_frame_desc *skbdesc,
-+ u32 status, enum nl80211_band band)
-+{
-+ u8 flags = 0;
-+ u8 idx = rt2x00_get_field32(status, TX_STA_FIFO_MCS);
-+
-+ switch (rt2x00_get_field32(status, TX_STA_FIFO_PHYMODE)) {
-+ case RATE_MODE_HT_GREENFIELD:
-+ flags |= IEEE80211_TX_RC_GREEN_FIELD;
-+ /* fall through */
-+ case RATE_MODE_HT_MIX:
-+ flags |= IEEE80211_TX_RC_MCS;
-+ break;
-+ case RATE_MODE_OFDM:
-+ if (band == NL80211_BAND_2GHZ)
-+ idx += 4;
-+ break;
-+ case RATE_MODE_CCK:
-+ if (idx >= 8)
-+ idx -= 8;
-+ break;
-+ }
-+
-+ if (rt2x00_get_field32(status, TX_STA_FIFO_BW))
-+ flags |= IEEE80211_TX_RC_40_MHZ_WIDTH;
-+
-+ if (rt2x00_get_field32(status, TX_STA_FIFO_SGI))
-+ flags |= IEEE80211_TX_RC_SHORT_GI;
-+
-+ skbdesc->tx_rate_idx = idx;
-+ skbdesc->tx_rate_flags = flags;
-+}
-+
- void rt2800_txdone_entry(struct queue_entry *entry, u32 status, __le32 *txwi,
- bool match)
- {
-@@ -898,7 +931,7 @@ void rt2800_txdone_entry(struct queue_en
- * and provide retry count.
- */
- if (unlikely((aggr == 1 && ampdu == 0 && real_mcs != mcs)) || !match) {
-- skbdesc->tx_rate_idx = real_mcs;
-+ rt2800_rate_from_status(skbdesc, status, rt2x00dev->curr_band);
- mcs = real_mcs;
- }
-
diff --git a/package/kernel/mac80211/patches/020-16-rt2800-use-TXOP_BACKOFF-for-probe-frames.patch b/package/kernel/mac80211/patches/020-16-rt2800-use-TXOP_BACKOFF-for-probe-frames.patch
deleted file mode 100644
index 7825810cef..0000000000
--- a/package/kernel/mac80211/patches/020-16-rt2800-use-TXOP_BACKOFF-for-probe-frames.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From fb47ada8dc3c30c8e7b415da155742b49536c61e Mon Sep 17 00:00:00 2001
-From: Stanislaw Gruszka <sgruszka at redhat.com>
-Date: Wed, 15 Feb 2017 10:25:12 +0100
-Subject: [PATCH 16/19] rt2800: use TXOP_BACKOFF for probe frames
-
-Even if we do not set AMPDU bit in TXWI, device still can aggregate
-frame and send it with rate not corresponding to requested. That mean
-we can do not sent probe frames with requested rate. To prevent that
-use TXOP_BACKOFF for probe frames.
-
-Signed-off-by: Stanislaw Gruszka <sgruszka at redhat.com>
-Signed-off-by: Kalle Valo <kvalo at codeaurora.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2x00queue.c | 7 ++++---
- 1 file changed, 4 insertions(+), 3 deletions(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c
-@@ -372,15 +372,16 @@ static void rt2x00queue_create_tx_descri
-
- /*
- * Determine IFS values
-- * - Use TXOP_BACKOFF for management frames except beacons
-+ * - Use TXOP_BACKOFF for probe and management frames except beacons
- * - Use TXOP_SIFS for fragment bursts
- * - Use TXOP_HTTXOP for everything else
- *
- * Note: rt2800 devices won't use CTS protection (if used)
- * for frames not transmitted with TXOP_HTTXOP
- */
-- if (ieee80211_is_mgmt(hdr->frame_control) &&
-- !ieee80211_is_beacon(hdr->frame_control))
-+ if ((ieee80211_is_mgmt(hdr->frame_control) &&
-+ !ieee80211_is_beacon(hdr->frame_control)) ||
-+ (tx_info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE))
- txdesc->u.ht.txop = TXOP_BACKOFF;
- else if (!(tx_info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT))
- txdesc->u.ht.txop = TXOP_SIFS;
diff --git a/package/kernel/mac80211/patches/020-17-rt2x00-fix-rt2x00debug_dump_frame-comment.patch b/package/kernel/mac80211/patches/020-17-rt2x00-fix-rt2x00debug_dump_frame-comment.patch
deleted file mode 100644
index 415bf5b2a6..0000000000
--- a/package/kernel/mac80211/patches/020-17-rt2x00-fix-rt2x00debug_dump_frame-comment.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From dd35cc0896faff5ed9d22eac9ea4a1920e2eec0c Mon Sep 17 00:00:00 2001
-From: Stanislaw Gruszka <sgruszka at redhat.com>
-Date: Wed, 15 Feb 2017 10:25:13 +0100
-Subject: [PATCH 17/19] rt2x00: fix rt2x00debug_dump_frame comment
-
-Reported-by: Jeroen Roovers <jer at airfi.aero>
-Signed-off-by: Stanislaw Gruszka <sgruszka at redhat.com>
-Signed-off-by: Kalle Valo <kvalo at codeaurora.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2x00.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
-@@ -1396,7 +1396,7 @@ void rt2x00queue_flush_queues(struct rt2
- * rt2x00debug_dump_frame - Dump a frame to userspace through debugfs.
- * @rt2x00dev: Pointer to &struct rt2x00_dev.
- * @type: The type of frame that is being dumped.
-- * @skb: The skb containing the frame to be dumped.
-+ * @entry: The queue entry containing the frame to be dumped.
- */
- #ifdef CPTCFG_RT2X00_LIB_DEBUGFS
- void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev,
diff --git a/package/kernel/mac80211/patches/020-18-rt2x00-fix-TX_PWR_CFG_4-register-definition.patch b/package/kernel/mac80211/patches/020-18-rt2x00-fix-TX_PWR_CFG_4-register-definition.patch
deleted file mode 100644
index c6fb7dd2c4..0000000000
--- a/package/kernel/mac80211/patches/020-18-rt2x00-fix-TX_PWR_CFG_4-register-definition.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 5ce33b603063f36272fcfb1b4a5fde69f46eca88 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel at makrotopia.org>
-Date: Thu, 9 Mar 2017 00:54:22 +0100
-Subject: [PATCH 18/19] rt2x00: fix TX_PWR_CFG_4 register definition
-
-Some of the macros used to describe the TX_PWR_CFG_4 register accidentally
-refer to TX_PWR_CFG_3, probably a copy&paste error. Fix that.
-
-Signed-off-by: Daniel Golle <daniel at makrotopia.org>
-Acked-by: Stanislaw Gruszka <sgruszka at redhat.com>
-Signed-off-by: Kalle Valo <kvalo at codeaurora.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2800.h | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800.h
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h
-@@ -1171,10 +1171,10 @@
- #define TX_PWR_CFG_4_UKNOWN7 FIELD32(0x00000f00)
- #define TX_PWR_CFG_4_UKNOWN8 FIELD32(0x0000f000)
- /* bits for 3T devices */
--#define TX_PWR_CFG_3_STBC4_CH0 FIELD32(0x0000000f)
--#define TX_PWR_CFG_3_STBC4_CH1 FIELD32(0x000000f0)
--#define TX_PWR_CFG_3_STBC6_CH0 FIELD32(0x00000f00)
--#define TX_PWR_CFG_3_STBC6_CH1 FIELD32(0x0000f000)
-+#define TX_PWR_CFG_4_STBC4_CH0 FIELD32(0x0000000f)
-+#define TX_PWR_CFG_4_STBC4_CH1 FIELD32(0x000000f0)
-+#define TX_PWR_CFG_4_STBC6_CH0 FIELD32(0x00000f00)
-+#define TX_PWR_CFG_4_STBC6_CH1 FIELD32(0x0000f000)
-
- /*
- * TX_PIN_CFG:
diff --git a/package/kernel/mac80211/patches/020-19-rt2x00-add-support-for-MT7620.patch b/package/kernel/mac80211/patches/020-19-rt2x00-add-support-for-MT7620.patch
deleted file mode 100644
index b91e5821cd..0000000000
--- a/package/kernel/mac80211/patches/020-19-rt2x00-add-support-for-MT7620.patch
+++ /dev/null
@@ -1,2064 +0,0 @@
-From 41977e86c984fcdddb454a3d7887de5d47b5f530 Mon Sep 17 00:00:00 2001
-From: Roman Yeryomin <roman at advem.lv>
-Date: Tue, 21 Mar 2017 00:43:00 +0100
-Subject: [PATCH 19/19] rt2x00: add support for MT7620
-
-Basic support for MT7620 built-in wireless radio was added to
-OpenWrt in r41441. It has seen some heavy cleaning and refactoring
-since in order to match the Kernel's code quality standards.
-
-Signed-off-by: Roman Yeryomin <roman at advem.lv>
-Signed-off-by: Daniel Golle <daniel at makrotopia.org>
-Acked-by: Stanislaw Gruszka <sgruszka at redhat.com>
-Signed-off-by: Kalle Valo <kvalo at codeaurora.org>
----
- drivers/net/wireless/ralink/rt2x00/Kconfig | 2 +-
- drivers/net/wireless/ralink/rt2x00/rt2800.h | 177 +++
- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 1421 +++++++++++++++++++++++-
- drivers/net/wireless/ralink/rt2x00/rt2800lib.h | 4 +
- drivers/net/wireless/ralink/rt2x00/rt2x00.h | 1 +
- 5 files changed, 1578 insertions(+), 27 deletions(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/Kconfig
-+++ b/drivers/net/wireless/ralink/rt2x00/Kconfig
-@@ -210,7 +210,7 @@ endif
- config RT2800SOC
- tristate "Ralink WiSoC support"
- depends on m
-- depends on SOC_RT288X || SOC_RT305X
-+ depends on SOC_RT288X || SOC_RT305X || SOC_MT7620
- select RT2X00_LIB_SOC
- select RT2X00_LIB_MMIO
- select RT2X00_LIB_CRYPTO
---- a/drivers/net/wireless/ralink/rt2x00/rt2800.h
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h
-@@ -79,6 +79,7 @@
- #define RF5372 0x5372
- #define RF5390 0x5390
- #define RF5392 0x5392
-+#define RF7620 0x7620
-
- /*
- * Chipset revisions.
-@@ -639,6 +640,24 @@
- #define RF_CSR_CFG_BUSY FIELD32(0x00020000)
-
- /*
-+ * MT7620 RF registers (reversed order)
-+ */
-+#define RF_CSR_CFG_DATA_MT7620 FIELD32(0x0000ff00)
-+#define RF_CSR_CFG_REGNUM_MT7620 FIELD32(0x03ff0000)
-+#define RF_CSR_CFG_WRITE_MT7620 FIELD32(0x00000010)
-+#define RF_CSR_CFG_BUSY_MT7620 FIELD32(0x00000001)
-+
-+/* undocumented registers for calibration of new MAC */
-+#define RF_CONTROL0 0x0518
-+#define RF_BYPASS0 0x051c
-+#define RF_CONTROL1 0x0520
-+#define RF_BYPASS1 0x0524
-+#define RF_CONTROL2 0x0528
-+#define RF_BYPASS2 0x052c
-+#define RF_CONTROL3 0x0530
-+#define RF_BYPASS3 0x0534
-+
-+/*
- * EFUSE_CSR: RT30x0 EEPROM
- */
- #define EFUSE_CTRL 0x0580
-@@ -1022,6 +1041,16 @@
- #define AUTOWAKEUP_CFG_AUTOWAKE FIELD32(0x00008000)
-
- /*
-+ * MIMO_PS_CFG: MIMO Power-save Configuration
-+ */
-+#define MIMO_PS_CFG 0x1210
-+#define MIMO_PS_CFG_MMPS_BB_EN FIELD32(0x00000001)
-+#define MIMO_PS_CFG_MMPS_RX_ANT_NUM FIELD32(0x00000006)
-+#define MIMO_PS_CFG_MMPS_RF_EN FIELD32(0x00000008)
-+#define MIMO_PS_CFG_RX_STBY_POL FIELD32(0x00000010)
-+#define MIMO_PS_CFG_RX_RX_STBY0 FIELD32(0x00000020)
-+
-+/*
- * EDCA_AC0_CFG:
- */
- #define EDCA_AC0_CFG 0x1300
-@@ -1095,6 +1124,12 @@
- #define TX_PWR_CFG_0_OFDM6_CH1 FIELD32(0x00f00000)
- #define TX_PWR_CFG_0_OFDM12_CH0 FIELD32(0x0f000000)
- #define TX_PWR_CFG_0_OFDM12_CH1 FIELD32(0xf0000000)
-+/* bits for new 2T devices */
-+#define TX_PWR_CFG_0B_1MBS_2MBS FIELD32(0x000000ff)
-+#define TX_PWR_CFG_0B_5MBS_11MBS FIELD32(0x0000ff00)
-+#define TX_PWR_CFG_0B_6MBS_9MBS FIELD32(0x00ff0000)
-+#define TX_PWR_CFG_0B_12MBS_18MBS FIELD32(0xff000000)
-+
-
- /*
- * TX_PWR_CFG_1:
-@@ -1117,6 +1152,11 @@
- #define TX_PWR_CFG_1_MCS0_CH1 FIELD32(0x00f00000)
- #define TX_PWR_CFG_1_MCS2_CH0 FIELD32(0x0f000000)
- #define TX_PWR_CFG_1_MCS2_CH1 FIELD32(0xf0000000)
-+/* bits for new 2T devices */
-+#define TX_PWR_CFG_1B_24MBS_36MBS FIELD32(0x000000ff)
-+#define TX_PWR_CFG_1B_48MBS FIELD32(0x0000ff00)
-+#define TX_PWR_CFG_1B_MCS0_MCS1 FIELD32(0x00ff0000)
-+#define TX_PWR_CFG_1B_MCS2_MCS3 FIELD32(0xff000000)
-
- /*
- * TX_PWR_CFG_2:
-@@ -1139,6 +1179,11 @@
- #define TX_PWR_CFG_2_MCS8_CH1 FIELD32(0x00f00000)
- #define TX_PWR_CFG_2_MCS10_CH0 FIELD32(0x0f000000)
- #define TX_PWR_CFG_2_MCS10_CH1 FIELD32(0xf0000000)
-+/* bits for new 2T devices */
-+#define TX_PWR_CFG_2B_MCS4_MCS5 FIELD32(0x000000ff)
-+#define TX_PWR_CFG_2B_MCS6_MCS7 FIELD32(0x0000ff00)
-+#define TX_PWR_CFG_2B_MCS8_MCS9 FIELD32(0x00ff0000)
-+#define TX_PWR_CFG_2B_MCS10_MCS11 FIELD32(0xff000000)
-
- /*
- * TX_PWR_CFG_3:
-@@ -1161,6 +1206,11 @@
- #define TX_PWR_CFG_3_STBC0_CH1 FIELD32(0x00f00000)
- #define TX_PWR_CFG_3_STBC2_CH0 FIELD32(0x0f000000)
- #define TX_PWR_CFG_3_STBC2_CH1 FIELD32(0xf0000000)
-+/* bits for new 2T devices */
-+#define TX_PWR_CFG_3B_MCS12_MCS13 FIELD32(0x000000ff)
-+#define TX_PWR_CFG_3B_MCS14 FIELD32(0x0000ff00)
-+#define TX_PWR_CFG_3B_STBC_MCS0_MCS1 FIELD32(0x00ff0000)
-+#define TX_PWR_CFG_3B_STBC_MCS2_MSC3 FIELD32(0xff000000)
-
- /*
- * TX_PWR_CFG_4:
-@@ -1175,6 +1225,9 @@
- #define TX_PWR_CFG_4_STBC4_CH1 FIELD32(0x000000f0)
- #define TX_PWR_CFG_4_STBC6_CH0 FIELD32(0x00000f00)
- #define TX_PWR_CFG_4_STBC6_CH1 FIELD32(0x0000f000)
-+/* bits for new 2T devices */
-+#define TX_PWR_CFG_4B_STBC_MCS4_MCS5 FIELD32(0x000000ff)
-+#define TX_PWR_CFG_4B_STBC_MCS6 FIELD32(0x0000ff00)
-
- /*
- * TX_PIN_CFG:
-@@ -1201,6 +1254,8 @@
- #define TX_PIN_CFG_RFTR_POL FIELD32(0x00020000)
- #define TX_PIN_CFG_TRSW_EN FIELD32(0x00040000)
- #define TX_PIN_CFG_TRSW_POL FIELD32(0x00080000)
-+#define TX_PIN_CFG_RFRX_EN FIELD32(0x00100000)
-+#define TX_PIN_CFG_RFRX_POL FIELD32(0x00200000)
- #define TX_PIN_CFG_PA_PE_A2_EN FIELD32(0x01000000)
- #define TX_PIN_CFG_PA_PE_G2_EN FIELD32(0x02000000)
- #define TX_PIN_CFG_PA_PE_A2_POL FIELD32(0x04000000)
-@@ -1547,6 +1602,95 @@
- #define TX_PWR_CFG_4_EXT_STBC4_CH2 FIELD32(0x0000000f)
- #define TX_PWR_CFG_4_EXT_STBC6_CH2 FIELD32(0x00000f00)
-
-+/* TXn_RF_GAIN_CORRECT: RF Gain Correction for each RF_ALC[3:2]
-+ * Unit: 0.1 dB, Range: -3.2 dB to 3.1 dB
-+ */
-+#define TX0_RF_GAIN_CORRECT 0x13a0
-+#define TX0_RF_GAIN_CORRECT_GAIN_CORR_0 FIELD32(0x0000003f)
-+#define TX0_RF_GAIN_CORRECT_GAIN_CORR_1 FIELD32(0x00003f00)
-+#define TX0_RF_GAIN_CORRECT_GAIN_CORR_2 FIELD32(0x003f0000)
-+#define TX0_RF_GAIN_CORRECT_GAIN_CORR_3 FIELD32(0x3f000000)
-+
-+#define TX1_RF_GAIN_CORRECT 0x13a4
-+#define TX1_RF_GAIN_CORRECT_GAIN_CORR_0 FIELD32(0x0000003f)
-+#define TX1_RF_GAIN_CORRECT_GAIN_CORR_1 FIELD32(0x00003f00)
-+#define TX1_RF_GAIN_CORRECT_GAIN_CORR_2 FIELD32(0x003f0000)
-+#define TX1_RF_GAIN_CORRECT_GAIN_CORR_3 FIELD32(0x3f000000)
-+
-+/* TXn_RF_GAIN_ATTEN: TXn RF Gain Attenuation Level
-+ * Format: 7-bit, signed value
-+ * Unit: 0.5 dB, Range: -20 dB to -5 dB
-+ */
-+#define TX0_RF_GAIN_ATTEN 0x13a8
-+#define TX0_RF_GAIN_ATTEN_LEVEL_0 FIELD32(0x0000007f)
-+#define TX0_RF_GAIN_ATTEN_LEVEL_1 FIELD32(0x00007f00)
-+#define TX0_RF_GAIN_ATTEN_LEVEL_2 FIELD32(0x007f0000)
-+#define TX0_RF_GAIN_ATTEN_LEVEL_3 FIELD32(0x7f000000)
-+#define TX1_RF_GAIN_ATTEN 0x13ac
-+#define TX1_RF_GAIN_ATTEN_LEVEL_0 FIELD32(0x0000007f)
-+#define TX1_RF_GAIN_ATTEN_LEVEL_1 FIELD32(0x00007f00)
-+#define TX1_RF_GAIN_ATTEN_LEVEL_2 FIELD32(0x007f0000)
-+#define TX1_RF_GAIN_ATTEN_LEVEL_3 FIELD32(0x7f000000)
-+
-+/* TX_ALC_CFG_0: TX Automatic Level Control Configuration 0
-+ * TX_ALC_LIMIT_n: TXn upper limit
-+ * TX_ALC_CH_INIT_n: TXn channel initial transmission gain
-+ * Unit: 0.5 dB, Range: 0 to 23.5 dB
-+ */
-+#define TX_ALC_CFG_0 0x13b0
-+#define TX_ALC_CFG_0_CH_INIT_0 FIELD32(0x0000003f)
-+#define TX_ALC_CFG_0_CH_INIT_1 FIELD32(0x00003f00)
-+#define TX_ALC_CFG_0_LIMIT_0 FIELD32(0x003f0000)
-+#define TX_ALC_CFG_0_LIMIT_1 FIELD32(0x3f000000)
-+
-+/* TX_ALC_CFG_1: TX Automatic Level Control Configuration 1
-+ * TX_TEMP_COMP: TX Power Temperature Compensation
-+ * Unit: 0.5 dB, Range: -10 dB to 10 dB
-+ * TXn_GAIN_FINE: TXn Gain Fine Adjustment
-+ * Unit: 0.1 dB, Range: -0.8 dB to 0.7 dB
-+ * RF_TOS_DLY: Sets the RF_TOS_EN assertion delay after
-+ * deassertion of PA_PE.
-+ * Unit: 0.25 usec
-+ * TXn_RF_GAIN_ATTEN: TXn RF gain attentuation selector
-+ * RF_TOS_TIMEOUT: time-out value for RF_TOS_ENABLE
-+ * deassertion if RF_TOS_DONE is missing.
-+ * Unit: 0.25 usec
-+ * RF_TOS_ENABLE: TX offset calibration enable
-+ * ROS_BUSY_EN: RX offset calibration busy enable
-+ */
-+#define TX_ALC_CFG_1 0x13b4
-+#define TX_ALC_CFG_1_TX_TEMP_COMP FIELD32(0x0000003f)
-+#define TX_ALC_CFG_1_TX0_GAIN_FINE FIELD32(0x00000f00)
-+#define TX_ALC_CFG_1_TX1_GAIN_FINE FIELD32(0x0000f000)
-+#define TX_ALC_CFG_1_RF_TOS_DLY FIELD32(0x00070000)
-+#define TX_ALC_CFG_1_TX0_RF_GAIN_ATTEN FIELD32(0x00300000)
-+#define TX_ALC_CFG_1_TX1_RF_GAIN_ATTEN FIELD32(0x00c00000)
-+#define TX_ALC_CFG_1_RF_TOS_TIMEOUT FIELD32(0x3f000000)
-+#define TX_ALC_CFG_1_RF_TOS_ENABLE FIELD32(0x40000000)
-+#define TX_ALC_CFG_1_ROS_BUSY_EN FIELD32(0x80000000)
-+
-+/* TXn_BB_GAIN_ATTEN: TXn RF Gain Attenuation Level
-+ * Format: 5-bit signed values
-+ * Unit: 0.5 dB, Range: -8 dB to 7 dB
-+ */
-+#define TX0_BB_GAIN_ATTEN 0x13c0
-+#define TX0_BB_GAIN_ATTEN_LEVEL_0 FIELD32(0x0000001f)
-+#define TX0_BB_GAIN_ATTEN_LEVEL_1 FIELD32(0x00001f00)
-+#define TX0_BB_GAIN_ATTEN_LEVEL_2 FIELD32(0x001f0000)
-+#define TX0_BB_GAIN_ATTEN_LEVEL_3 FIELD32(0x1f000000)
-+#define TX1_BB_GAIN_ATTEN 0x13c4
-+#define TX1_BB_GAIN_ATTEN_LEVEL_0 FIELD32(0x0000001f)
-+#define TX1_BB_GAIN_ATTEN_LEVEL_1 FIELD32(0x00001f00)
-+#define TX1_BB_GAIN_ATTEN_LEVEL_2 FIELD32(0x001f0000)
-+#define TX1_BB_GAIN_ATTEN_LEVEL_3 FIELD32(0x1f000000)
-+
-+/* TX_ALC_VGA3: TX Automatic Level Correction Variable Gain Amplifier 3 */
-+#define TX_ALC_VGA3 0x13c8
-+#define TX_ALC_VGA3_TX0_ALC_VGA3 FIELD32(0x0000001f)
-+#define TX_ALC_VGA3_TX1_ALC_VGA3 FIELD32(0x00001f00)
-+#define TX_ALC_VGA3_TX0_ALC_VGA2 FIELD32(0x001f0000)
-+#define TX_ALC_VGA3_TX1_ALC_VGA2 FIELD32(0x1f000000)
-+
- /* TX_PWR_CFG_7 */
- #define TX_PWR_CFG_7 0x13d4
- #define TX_PWR_CFG_7_OFDM54_CH0 FIELD32(0x0000000f)
-@@ -1555,6 +1699,10 @@
- #define TX_PWR_CFG_7_MCS7_CH0 FIELD32(0x000f0000)
- #define TX_PWR_CFG_7_MCS7_CH1 FIELD32(0x00f00000)
- #define TX_PWR_CFG_7_MCS7_CH2 FIELD32(0x0f000000)
-+/* bits for new 2T devices */
-+#define TX_PWR_CFG_7B_54MBS FIELD32(0x000000ff)
-+#define TX_PWR_CFG_7B_MCS7 FIELD32(0x00ff0000)
-+
-
- /* TX_PWR_CFG_8 */
- #define TX_PWR_CFG_8 0x13d8
-@@ -1564,12 +1712,17 @@
- #define TX_PWR_CFG_8_MCS23_CH0 FIELD32(0x000f0000)
- #define TX_PWR_CFG_8_MCS23_CH1 FIELD32(0x00f00000)
- #define TX_PWR_CFG_8_MCS23_CH2 FIELD32(0x0f000000)
-+/* bits for new 2T devices */
-+#define TX_PWR_CFG_8B_MCS15 FIELD32(0x000000ff)
-+
-
- /* TX_PWR_CFG_9 */
- #define TX_PWR_CFG_9 0x13dc
- #define TX_PWR_CFG_9_STBC7_CH0 FIELD32(0x0000000f)
- #define TX_PWR_CFG_9_STBC7_CH1 FIELD32(0x000000f0)
- #define TX_PWR_CFG_9_STBC7_CH2 FIELD32(0x00000f00)
-+/* bits for new 2T devices */
-+#define TX_PWR_CFG_9B_STBC_MCS7 FIELD32(0x000000ff)
-
- /*
- * RX_FILTER_CFG: RX configuration register.
-@@ -2137,11 +2290,14 @@ struct mac_iveiv_entry {
- #define RFCSR1_TX1_PD FIELD8(0x20)
- #define RFCSR1_RX2_PD FIELD8(0x40)
- #define RFCSR1_TX2_PD FIELD8(0x80)
-+#define RFCSR1_TX2_EN_MT7620 FIELD8(0x02)
-
- /*
- * RFCSR 2:
- */
- #define RFCSR2_RESCAL_EN FIELD8(0x80)
-+#define RFCSR2_RX2_EN_MT7620 FIELD8(0x02)
-+#define RFCSR2_TX2_EN_MT7620 FIELD8(0x20)
-
- /*
- * RFCSR 3:
-@@ -2160,6 +2316,12 @@ struct mac_iveiv_entry {
- #define RFCSR3_BIT5 FIELD8(0x20)
-
- /*
-+ * RFCSR 4:
-+ * VCOCAL_EN used by MT7620
-+ */
-+#define RFCSR4_VCOCAL_EN FIELD8(0x80)
-+
-+/*
- * FRCSR 5:
- */
- #define RFCSR5_R1 FIELD8(0x0c)
-@@ -2214,6 +2376,7 @@ struct mac_iveiv_entry {
- */
- #define RFCSR13_TX_POWER FIELD8(0x1f)
- #define RFCSR13_DR0 FIELD8(0xe0)
-+#define RFCSR13_RDIV_MT7620 FIELD8(0x03)
-
- /*
- * RFCSR 15:
-@@ -2224,6 +2387,8 @@ struct mac_iveiv_entry {
- * RFCSR 16:
- */
- #define RFCSR16_TXMIXER_GAIN FIELD8(0x07)
-+#define RFCSR16_RF_PLL_FREQ_SEL_MT7620 FIELD8(0x0F)
-+#define RFCSR16_SDM_MODE_MT7620 FIELD8(0xE0)
-
- /*
- * RFCSR 17:
-@@ -2236,6 +2401,8 @@ struct mac_iveiv_entry {
- /* RFCSR 18 */
- #define RFCSR18_XO_TUNE_BYPASS FIELD8(0x40)
-
-+/* RFCSR 19 */
-+#define RFCSR19_K FIELD8(0x03)
-
- /*
- * RFCSR 20:
-@@ -2246,11 +2413,14 @@ struct mac_iveiv_entry {
- * RFCSR 21:
- */
- #define RFCSR21_RX_LO2_EN FIELD8(0x08)
-+#define RFCSR21_BIT1 FIELD8(0x01)
-+#define RFCSR21_BIT8 FIELD8(0x80)
-
- /*
- * RFCSR 22:
- */
- #define RFCSR22_BASEBAND_LOOPBACK FIELD8(0x01)
-+#define RFCSR22_FREQPLAN_D_MT7620 FIELD8(0x07)
-
- /*
- * RFCSR 23:
-@@ -2273,6 +2443,11 @@ struct mac_iveiv_entry {
- #define RFCSR27_R4 FIELD8(0x40)
-
- /*
-+ * RFCSR 28:
-+ */
-+#define RFCSR28_CH11_HT40 FIELD8(0x04)
-+
-+/*
- * RFCSR 29:
- */
- #define RFCSR29_ADC6_TEST FIELD8(0x01)
-@@ -2333,6 +2508,7 @@ struct mac_iveiv_entry {
- */
- #define RFCSR42_BIT1 FIELD8(0x01)
- #define RFCSR42_BIT4 FIELD8(0x08)
-+#define RFCSR42_TX2_EN_MT7620 FIELD8(0x40)
-
- /*
- * RFCSR 49:
-@@ -2435,6 +2611,7 @@ enum rt2800_eeprom_word {
- EEPROM_TSSI_BOUND_BG5,
- EEPROM_TXPOWER_A1,
- EEPROM_TXPOWER_A2,
-+ EEPROM_TXPOWER_INIT,
- EEPROM_TSSI_BOUND_A1,
- EEPROM_TSSI_BOUND_A2,
- EEPROM_TSSI_BOUND_A3,
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -59,6 +59,9 @@
- rt2800_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg))
- #define WAIT_FOR_RFCSR(__dev, __reg) \
- rt2800_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY, (__reg))
-+#define WAIT_FOR_RFCSR_MT7620(__dev, __reg) \
-+ rt2800_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY_MT7620, \
-+ (__reg))
- #define WAIT_FOR_RF(__dev, __reg) \
- rt2800_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg))
- #define WAIT_FOR_MCU(__dev, __reg) \
-@@ -150,19 +153,56 @@ static void rt2800_rfcsr_write(struct rt
- * Wait until the RFCSR becomes available, afterwards we
- * can safely write the new data into the register.
- */
-- if (WAIT_FOR_RFCSR(rt2x00dev, ®)) {
-- reg = 0;
-- rt2x00_set_field32(®, RF_CSR_CFG_DATA, value);
-- rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word);
-- rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 1);
-- rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1);
-+ switch (rt2x00dev->chip.rt) {
-+ case RT6352:
-+ if (WAIT_FOR_RFCSR_MT7620(rt2x00dev, ®)) {
-+ reg = 0;
-+ rt2x00_set_field32(®, RF_CSR_CFG_DATA_MT7620, value);
-+ rt2x00_set_field32(®, RF_CSR_CFG_REGNUM_MT7620,
-+ word);
-+ rt2x00_set_field32(®, RF_CSR_CFG_WRITE_MT7620, 1);
-+ rt2x00_set_field32(®, RF_CSR_CFG_BUSY_MT7620, 1);
-+
-+ rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg);
-+ }
-+ break;
-+
-+ default:
-+ if (WAIT_FOR_RFCSR(rt2x00dev, ®)) {
-+ reg = 0;
-+ rt2x00_set_field32(®, RF_CSR_CFG_DATA, value);
-+ rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word);
-+ rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 1);
-+ rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1);
-
-- rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg);
-+ rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg);
-+ }
-+ break;
- }
-
- mutex_unlock(&rt2x00dev->csr_mutex);
- }
-
-+static void rt2800_rfcsr_write_bank(struct rt2x00_dev *rt2x00dev, const u8 bank,
-+ const unsigned int reg, const u8 value)
-+{
-+ rt2800_rfcsr_write(rt2x00dev, (reg | (bank << 6)), value);
-+}
-+
-+static void rt2800_rfcsr_write_chanreg(struct rt2x00_dev *rt2x00dev,
-+ const unsigned int reg, const u8 value)
-+{
-+ rt2800_rfcsr_write_bank(rt2x00dev, 4, reg, value);
-+ rt2800_rfcsr_write_bank(rt2x00dev, 6, reg, value);
-+}
-+
-+static void rt2800_rfcsr_write_dccal(struct rt2x00_dev *rt2x00dev,
-+ const unsigned int reg, const u8 value)
-+{
-+ rt2800_rfcsr_write_bank(rt2x00dev, 5, reg, value);
-+ rt2800_rfcsr_write_bank(rt2x00dev, 7, reg, value);
-+}
-+
- static void rt2800_rfcsr_read(struct rt2x00_dev *rt2x00dev,
- const unsigned int word, u8 *value)
- {
-@@ -178,22 +218,48 @@ static void rt2800_rfcsr_read(struct rt2
- * doesn't become available in time, reg will be 0xffffffff
- * which means we return 0xff to the caller.
- */
-- if (WAIT_FOR_RFCSR(rt2x00dev, ®)) {
-- reg = 0;
-- rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word);
-- rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 0);
-- rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1);
-+ switch (rt2x00dev->chip.rt) {
-+ case RT6352:
-+ if (WAIT_FOR_RFCSR_MT7620(rt2x00dev, ®)) {
-+ reg = 0;
-+ rt2x00_set_field32(®, RF_CSR_CFG_REGNUM_MT7620,
-+ word);
-+ rt2x00_set_field32(®, RF_CSR_CFG_WRITE_MT7620, 0);
-+ rt2x00_set_field32(®, RF_CSR_CFG_BUSY_MT7620, 1);
-
-- rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg);
-+ rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg);
-
-- WAIT_FOR_RFCSR(rt2x00dev, ®);
-- }
-+ WAIT_FOR_RFCSR_MT7620(rt2x00dev, ®);
-+ }
-+
-+ *value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA_MT7620);
-+ break;
-
-- *value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA);
-+ default:
-+ if (WAIT_FOR_RFCSR(rt2x00dev, ®)) {
-+ reg = 0;
-+ rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word);
-+ rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 0);
-+ rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1);
-+
-+ rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg);
-+
-+ WAIT_FOR_RFCSR(rt2x00dev, ®);
-+ }
-+
-+ *value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA);
-+ break;
-+ }
-
- mutex_unlock(&rt2x00dev->csr_mutex);
- }
-
-+static void rt2800_rfcsr_read_bank(struct rt2x00_dev *rt2x00dev, const u8 bank,
-+ const unsigned int reg, u8 *value)
-+{
-+ rt2800_rfcsr_read(rt2x00dev, (reg | (bank << 6)), value);
-+}
-+
- static void rt2800_rf_write(struct rt2x00_dev *rt2x00dev,
- const unsigned int word, const u32 value)
- {
-@@ -250,6 +316,7 @@ static const unsigned int rt2800_eeprom_
- [EEPROM_TSSI_BOUND_BG5] = 0x003b,
- [EEPROM_TXPOWER_A1] = 0x003c,
- [EEPROM_TXPOWER_A2] = 0x0053,
-+ [EEPROM_TXPOWER_INIT] = 0x0068,
- [EEPROM_TSSI_BOUND_A1] = 0x006a,
- [EEPROM_TSSI_BOUND_A2] = 0x006b,
- [EEPROM_TSSI_BOUND_A3] = 0x006c,
-@@ -524,6 +591,7 @@ void rt2800_get_txwi_rxwi_size(struct rt
- break;
-
- case RT5592:
-+ case RT6352:
- *txwi_size = TXWI_DESC_SIZE_5WORDS;
- *rxwi_size = RXWI_DESC_SIZE_6WORDS;
- break;
-@@ -2810,7 +2878,8 @@ static void rt2800_config_channel_rf53xx
- rt2800_rfcsr_write(rt2x00dev, 59,
- r59_nonbt_rev[idx]);
- } else if (rt2x00_rt(rt2x00dev, RT5390) ||
-- rt2x00_rt(rt2x00dev, RT5392)) {
-+ rt2x00_rt(rt2x00dev, RT5392) ||
-+ rt2x00_rt(rt2x00dev, RT6352)) {
- static const char r59_non_bt[] = {0x8f, 0x8f,
- 0x8f, 0x8f, 0x8f, 0x8f, 0x8f, 0x8d,
- 0x8a, 0x88, 0x88, 0x87, 0x87, 0x86};
-@@ -3104,6 +3173,242 @@ static void rt2800_config_channel_rf55xx
- rt2800_bbp_write(rt2x00dev, 196, (rf->channel <= 14) ? 0x19 : 0x7F);
- }
-
-+static void rt2800_config_channel_rf7620(struct rt2x00_dev *rt2x00dev,
-+ struct ieee80211_conf *conf,
-+ struct rf_channel *rf,
-+ struct channel_info *info)
-+{
-+ struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
-+ u8 rx_agc_fc, tx_agc_fc;
-+ u8 rfcsr;
-+
-+ /* Frequeny plan setting */
-+ /* Rdiv setting (set 0x03 if Xtal==20)
-+ * R13[1:0]
-+ */
-+ rt2800_rfcsr_read(rt2x00dev, 13, &rfcsr);
-+ rt2x00_set_field8(&rfcsr, RFCSR13_RDIV_MT7620,
-+ rt2800_clk_is_20mhz(rt2x00dev) ? 3 : 0);
-+ rt2800_rfcsr_write(rt2x00dev, 13, rfcsr);
-+
-+ /* N setting
-+ * R20[7:0] in rf->rf1
-+ * R21[0] always 0
-+ */
-+ rt2800_rfcsr_read(rt2x00dev, 20, &rfcsr);
-+ rfcsr = (rf->rf1 & 0x00ff);
-+ rt2800_rfcsr_write(rt2x00dev, 20, rfcsr);
-+
-+ rt2800_rfcsr_read(rt2x00dev, 21, &rfcsr);
-+ rt2x00_set_field8(&rfcsr, RFCSR21_BIT1, 0);
-+ rt2800_rfcsr_write(rt2x00dev, 21, rfcsr);
-+
-+ /* K setting (always 0)
-+ * R16[3:0] (RF PLL freq selection)
-+ */
-+ rt2800_rfcsr_read(rt2x00dev, 16, &rfcsr);
-+ rt2x00_set_field8(&rfcsr, RFCSR16_RF_PLL_FREQ_SEL_MT7620, 0);
-+ rt2800_rfcsr_write(rt2x00dev, 16, rfcsr);
-+
-+ /* D setting (always 0)
-+ * R22[2:0] (D=15, R22[2:0]=<111>)
-+ */
-+ rt2800_rfcsr_read(rt2x00dev, 22, &rfcsr);
-+ rt2x00_set_field8(&rfcsr, RFCSR22_FREQPLAN_D_MT7620, 0);
-+ rt2800_rfcsr_write(rt2x00dev, 22, rfcsr);
-+
-+ /* Ksd setting
-+ * Ksd: R17<7:0> in rf->rf2
-+ * R18<7:0> in rf->rf3
-+ * R19<1:0> in rf->rf4
-+ */
-+ rt2800_rfcsr_read(rt2x00dev, 17, &rfcsr);
-+ rfcsr = rf->rf2;
-+ rt2800_rfcsr_write(rt2x00dev, 17, rfcsr);
-+
-+ rt2800_rfcsr_read(rt2x00dev, 18, &rfcsr);
-+ rfcsr = rf->rf3;
-+ rt2800_rfcsr_write(rt2x00dev, 18, rfcsr);
-+
-+ rt2800_rfcsr_read(rt2x00dev, 19, &rfcsr);
-+ rt2x00_set_field8(&rfcsr, RFCSR19_K, rf->rf4);
-+ rt2800_rfcsr_write(rt2x00dev, 19, rfcsr);
-+
-+ /* Default: XO=20MHz , SDM mode */
-+ rt2800_rfcsr_read(rt2x00dev, 16, &rfcsr);
-+ rt2x00_set_field8(&rfcsr, RFCSR16_SDM_MODE_MT7620, 0x80);
-+ rt2800_rfcsr_write(rt2x00dev, 16, rfcsr);
-+
-+ rt2800_rfcsr_read(rt2x00dev, 21, &rfcsr);
-+ rt2x00_set_field8(&rfcsr, RFCSR21_BIT8, 1);
-+ rt2800_rfcsr_write(rt2x00dev, 21, rfcsr);
-+
-+ rt2800_rfcsr_read(rt2x00dev, 1, &rfcsr);
-+ rt2x00_set_field8(&rfcsr, RFCSR1_TX2_EN_MT7620,
-+ rt2x00dev->default_ant.tx_chain_num != 1);
-+ rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
-+
-+ rt2800_rfcsr_read(rt2x00dev, 2, &rfcsr);
-+ rt2x00_set_field8(&rfcsr, RFCSR2_TX2_EN_MT7620,
-+ rt2x00dev->default_ant.tx_chain_num != 1);
-+ rt2x00_set_field8(&rfcsr, RFCSR2_RX2_EN_MT7620,
-+ rt2x00dev->default_ant.rx_chain_num != 1);
-+ rt2800_rfcsr_write(rt2x00dev, 2, rfcsr);
-+
-+ rt2800_rfcsr_read(rt2x00dev, 42, &rfcsr);
-+ rt2x00_set_field8(&rfcsr, RFCSR42_TX2_EN_MT7620,
-+ rt2x00dev->default_ant.tx_chain_num != 1);
-+ rt2800_rfcsr_write(rt2x00dev, 42, rfcsr);
-+
-+ /* RF for DC Cal BW */
-+ if (conf_is_ht40(conf)) {
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 6, 0x10);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 7, 0x10);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 8, 0x04);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 58, 0x10);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 59, 0x10);
-+ } else {
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 6, 0x20);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 7, 0x20);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 8, 0x00);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 58, 0x20);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 59, 0x20);
-+ }
-+
-+ if (conf_is_ht40(conf)) {
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 58, 0x08);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 59, 0x08);
-+ } else {
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 58, 0x28);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 59, 0x28);
-+ }
-+
-+ rt2800_rfcsr_read(rt2x00dev, 28, &rfcsr);
-+ rt2x00_set_field8(&rfcsr, RFCSR28_CH11_HT40,
-+ conf_is_ht40(conf) && (rf->channel == 11));
-+ rt2800_rfcsr_write(rt2x00dev, 28, rfcsr);
-+
-+ if (!test_bit(DEVICE_STATE_SCANNING, &rt2x00dev->flags)) {
-+ if (conf_is_ht40(conf)) {
-+ rx_agc_fc = drv_data->rx_calibration_bw40;
-+ tx_agc_fc = drv_data->tx_calibration_bw40;
-+ } else {
-+ rx_agc_fc = drv_data->rx_calibration_bw20;
-+ tx_agc_fc = drv_data->tx_calibration_bw20;
-+ }
-+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 6, &rfcsr);
-+ rfcsr &= (~0x3F);
-+ rfcsr |= rx_agc_fc;
-+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 6, rfcsr);
-+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 7, &rfcsr);
-+ rfcsr &= (~0x3F);
-+ rfcsr |= rx_agc_fc;
-+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 7, rfcsr);
-+ rt2800_rfcsr_read_bank(rt2x00dev, 7, 6, &rfcsr);
-+ rfcsr &= (~0x3F);
-+ rfcsr |= rx_agc_fc;
-+ rt2800_rfcsr_write_bank(rt2x00dev, 7, 6, rfcsr);
-+ rt2800_rfcsr_read_bank(rt2x00dev, 7, 7, &rfcsr);
-+ rfcsr &= (~0x3F);
-+ rfcsr |= rx_agc_fc;
-+ rt2800_rfcsr_write_bank(rt2x00dev, 7, 7, rfcsr);
-+
-+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 58, &rfcsr);
-+ rfcsr &= (~0x3F);
-+ rfcsr |= tx_agc_fc;
-+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 58, rfcsr);
-+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 59, &rfcsr);
-+ rfcsr &= (~0x3F);
-+ rfcsr |= tx_agc_fc;
-+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 59, rfcsr);
-+ rt2800_rfcsr_read_bank(rt2x00dev, 7, 58, &rfcsr);
-+ rfcsr &= (~0x3F);
-+ rfcsr |= tx_agc_fc;
-+ rt2800_rfcsr_write_bank(rt2x00dev, 7, 58, rfcsr);
-+ rt2800_rfcsr_read_bank(rt2x00dev, 7, 59, &rfcsr);
-+ rfcsr &= (~0x3F);
-+ rfcsr |= tx_agc_fc;
-+ rt2800_rfcsr_write_bank(rt2x00dev, 7, 59, rfcsr);
-+ }
-+}
-+
-+static void rt2800_config_alc(struct rt2x00_dev *rt2x00dev,
-+ struct ieee80211_channel *chan,
-+ int power_level) {
-+ u16 eeprom, target_power, max_power;
-+ u32 mac_sys_ctrl, mac_status;
-+ u32 reg;
-+ u8 bbp;
-+ int i;
-+
-+ /* hardware unit is 0.5dBm, limited to 23.5dBm */
-+ power_level *= 2;
-+ if (power_level > 0x2f)
-+ power_level = 0x2f;
-+
-+ max_power = chan->max_power * 2;
-+ if (max_power > 0x2f)
-+ max_power = 0x2f;
-+
-+ rt2800_register_read(rt2x00dev, TX_ALC_CFG_0, ®);
-+ rt2x00_set_field32(®, TX_ALC_CFG_0_CH_INIT_0, power_level);
-+ rt2x00_set_field32(®, TX_ALC_CFG_0_CH_INIT_1, power_level);
-+ rt2x00_set_field32(®, TX_ALC_CFG_0_LIMIT_0, max_power);
-+ rt2x00_set_field32(®, TX_ALC_CFG_0_LIMIT_1, max_power);
-+
-+ rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1, &eeprom);
-+ if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_INTERNAL_TX_ALC)) {
-+ /* init base power by eeprom target power */
-+ rt2800_eeprom_read(rt2x00dev, EEPROM_TXPOWER_INIT,
-+ &target_power);
-+ rt2x00_set_field32(®, TX_ALC_CFG_0_CH_INIT_0, target_power);
-+ rt2x00_set_field32(®, TX_ALC_CFG_0_CH_INIT_1, target_power);
-+ }
-+ rt2800_register_write(rt2x00dev, TX_ALC_CFG_0, reg);
-+
-+ rt2800_register_read(rt2x00dev, TX_ALC_CFG_1, ®);
-+ rt2x00_set_field32(®, TX_ALC_CFG_1_TX_TEMP_COMP, 0);
-+ rt2800_register_write(rt2x00dev, TX_ALC_CFG_1, reg);
-+
-+ /* Save MAC SYS CTRL registers */
-+ rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, &mac_sys_ctrl);
-+ /* Disable Tx/Rx */
-+ rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0);
-+ /* Check MAC Tx/Rx idle */
-+ for (i = 0; i < 10000; i++) {
-+ rt2800_register_read(rt2x00dev, MAC_STATUS_CFG,
-+ &mac_status);
-+ if (mac_status & 0x3)
-+ usleep_range(50, 200);
-+ else
-+ break;
-+ }
-+
-+ if (i == 10000)
-+ rt2x00_warn(rt2x00dev, "Wait MAC Status to MAX !!!\n");
-+
-+ if (chan->center_freq > 2457) {
-+ rt2800_bbp_read(rt2x00dev, 30, &bbp);
-+ bbp = 0x40;
-+ rt2800_bbp_write(rt2x00dev, 30, bbp);
-+ rt2800_rfcsr_write(rt2x00dev, 39, 0);
-+ if (rt2x00_has_cap_external_lna_bg(rt2x00dev))
-+ rt2800_rfcsr_write(rt2x00dev, 42, 0xfb);
-+ else
-+ rt2800_rfcsr_write(rt2x00dev, 42, 0x7b);
-+ } else {
-+ rt2800_bbp_read(rt2x00dev, 30, &bbp);
-+ bbp = 0x1f;
-+ rt2800_bbp_write(rt2x00dev, 30, bbp);
-+ rt2800_rfcsr_write(rt2x00dev, 39, 0x80);
-+ if (rt2x00_has_cap_external_lna_bg(rt2x00dev))
-+ rt2800_rfcsr_write(rt2x00dev, 42, 0xdb);
-+ else
-+ rt2800_rfcsr_write(rt2x00dev, 42, 0x5b);
-+ }
-+ rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, mac_sys_ctrl);
-+}
-+
- static void rt2800_bbp_write_with_rx_chain(struct rt2x00_dev *rt2x00dev,
- const unsigned int word,
- const u8 value)
-@@ -3228,7 +3533,7 @@ static void rt2800_config_channel(struct
- struct channel_info *info)
- {
- u32 reg;
-- unsigned int tx_pin;
-+ u32 tx_pin;
- u8 bbp, rfcsr;
-
- info->default_power1 = rt2800_txpower_to_dev(rt2x00dev, rf->channel,
-@@ -3273,6 +3578,9 @@ static void rt2800_config_channel(struct
- case RF5592:
- rt2800_config_channel_rf55xx(rt2x00dev, conf, rf, info);
- break;
-+ case RF7620:
-+ rt2800_config_channel_rf7620(rt2x00dev, conf, rf, info);
-+ break;
- default:
- rt2800_config_channel_rf2xxx(rt2x00dev, conf, rf, info);
- }
-@@ -3347,7 +3655,8 @@ static void rt2800_config_channel(struct
-
- if (rf->channel <= 14) {
- if (!rt2x00_rt(rt2x00dev, RT5390) &&
-- !rt2x00_rt(rt2x00dev, RT5392)) {
-+ !rt2x00_rt(rt2x00dev, RT5392) &&
-+ !rt2x00_rt(rt2x00dev, RT6352)) {
- if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) {
- rt2800_bbp_write(rt2x00dev, 82, 0x62);
- rt2800_bbp_write(rt2x00dev, 75, 0x46);
-@@ -3367,7 +3676,7 @@ static void rt2800_config_channel(struct
- rt2800_bbp_write(rt2x00dev, 82, 0x94);
- else if (rt2x00_rt(rt2x00dev, RT3593))
- rt2800_bbp_write(rt2x00dev, 82, 0x82);
-- else
-+ else if (!rt2x00_rt(rt2x00dev, RT6352))
- rt2800_bbp_write(rt2x00dev, 82, 0xf2);
-
- if (rt2x00_rt(rt2x00dev, RT3593))
-@@ -3388,7 +3697,7 @@ static void rt2800_config_channel(struct
- if (rt2x00_rt(rt2x00dev, RT3572))
- rt2800_rfcsr_write(rt2x00dev, 8, 0);
-
-- tx_pin = 0;
-+ rt2800_register_read(rt2x00dev, TX_PIN_CFG, &tx_pin);
-
- switch (rt2x00dev->default_ant.tx_chain_num) {
- case 3:
-@@ -3437,6 +3746,7 @@ static void rt2800_config_channel(struct
-
- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1);
- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1);
-+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFRX_EN, 1); /* mt7620 */
-
- rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);
-
-@@ -3495,7 +3805,7 @@ static void rt2800_config_channel(struct
- usleep_range(1000, 1500);
- }
-
-- if (rt2x00_rt(rt2x00dev, RT5592)) {
-+ if (rt2x00_rt(rt2x00dev, RT5592) || rt2x00_rt(rt2x00dev, RT6352)) {
- rt2800_bbp_write(rt2x00dev, 195, 141);
- rt2800_bbp_write(rt2x00dev, 196, conf_is_ht40(conf) ? 0x10 : 0x1a);
-
-@@ -4182,6 +4492,128 @@ static void rt2800_config_txpower_rt3593
- (unsigned long) regs[i]);
- }
-
-+static void rt2800_config_txpower_rt6352(struct rt2x00_dev *rt2x00dev,
-+ struct ieee80211_channel *chan,
-+ int power_level)
-+{
-+ u32 reg, pwreg;
-+ u16 eeprom;
-+ u32 data, gdata;
-+ u8 t, i;
-+ enum nl80211_band band = chan->band;
-+ int delta;
-+
-+ /* Warn user if bw_comp is set in EEPROM */
-+ delta = rt2800_get_txpower_bw_comp(rt2x00dev, band);
-+
-+ if (delta)
-+ rt2x00_warn(rt2x00dev, "ignoring EEPROM HT40 power delta: %d\n",
-+ delta);
-+
-+ /* populate TX_PWR_CFG_0 up to TX_PWR_CFG_4 from EEPROM for HT20, limit
-+ * value to 0x3f and replace 0x20 by 0x21 as this is what the vendor
-+ * driver does as well, though it looks kinda wrong.
-+ * Maybe some misunderstanding of what a signed 8-bit value is? Maybe
-+ * the hardware has a problem handling 0x20, and as the code initially
-+ * used a fixed offset between HT20 and HT40 rates they had to work-
-+ * around that issue and most likely just forgot about it later on.
-+ * Maybe we should use rt2800_get_txpower_bw_comp() here as well,
-+ * however, the corresponding EEPROM value is not respected by the
-+ * vendor driver, so maybe this is rather being taken care of the
-+ * TXALC and the driver doesn't need to handle it...?
-+ * Though this is all very awkward, just do as they did, as that's what
-+ * board vendors expected when they populated the EEPROM...
-+ */
-+ for (i = 0; i < 5; i++) {
-+ rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_TXPOWER_BYRATE,
-+ i * 2, &eeprom);
-+
-+ data = eeprom;
-+
-+ t = eeprom & 0x3f;
-+ if (t == 32)
-+ t++;
-+
-+ gdata = t;
-+
-+ t = (eeprom & 0x3f00) >> 8;
-+ if (t == 32)
-+ t++;
-+
-+ gdata |= (t << 8);
-+
-+ rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_TXPOWER_BYRATE,
-+ (i * 2) + 1, &eeprom);
-+
-+ t = eeprom & 0x3f;
-+ if (t == 32)
-+ t++;
-+
-+ gdata |= (t << 16);
-+
-+ t = (eeprom & 0x3f00) >> 8;
-+ if (t == 32)
-+ t++;
-+
-+ gdata |= (t << 24);
-+ data |= (eeprom << 16);
-+
-+ if (!test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags)) {
-+ /* HT20 */
-+ if (data != 0xffffffff)
-+ rt2800_register_write(rt2x00dev,
-+ TX_PWR_CFG_0 + (i * 4),
-+ data);
-+ } else {
-+ /* HT40 */
-+ if (gdata != 0xffffffff)
-+ rt2800_register_write(rt2x00dev,
-+ TX_PWR_CFG_0 + (i * 4),
-+ gdata);
-+ }
-+ }
-+
-+ /* Aparently Ralink ran out of space in the BYRATE calibration section
-+ * of the EERPOM which is copied to the corresponding TX_PWR_CFG_x
-+ * registers. As recent 2T chips use 8-bit instead of 4-bit values for
-+ * power-offsets more space would be needed. Ralink decided to keep the
-+ * EEPROM layout untouched and rather have some shared values covering
-+ * multiple bitrates.
-+ * Populate the registers not covered by the EEPROM in the same way the
-+ * vendor driver does.
-+ */
-+
-+ /* For OFDM 54MBS use value from OFDM 48MBS */
-+ pwreg = 0;
-+ rt2800_register_read(rt2x00dev, TX_PWR_CFG_1, ®);
-+ t = rt2x00_get_field32(reg, TX_PWR_CFG_1B_48MBS);
-+ rt2x00_set_field32(&pwreg, TX_PWR_CFG_7B_54MBS, t);
-+
-+ /* For MCS 7 use value from MCS 6 */
-+ rt2800_register_read(rt2x00dev, TX_PWR_CFG_2, ®);
-+ t = rt2x00_get_field32(reg, TX_PWR_CFG_2B_MCS6_MCS7);
-+ rt2x00_set_field32(&pwreg, TX_PWR_CFG_7B_MCS7, t);
-+ rt2800_register_write(rt2x00dev, TX_PWR_CFG_7, pwreg);
-+
-+ /* For MCS 15 use value from MCS 14 */
-+ pwreg = 0;
-+ rt2800_register_read(rt2x00dev, TX_PWR_CFG_3, ®);
-+ t = rt2x00_get_field32(reg, TX_PWR_CFG_3B_MCS14);
-+ rt2x00_set_field32(&pwreg, TX_PWR_CFG_8B_MCS15, t);
-+ rt2800_register_write(rt2x00dev, TX_PWR_CFG_8, pwreg);
-+
-+ /* For STBC MCS 7 use value from STBC MCS 6 */
-+ pwreg = 0;
-+ rt2800_register_read(rt2x00dev, TX_PWR_CFG_4, ®);
-+ t = rt2x00_get_field32(reg, TX_PWR_CFG_4B_STBC_MCS6);
-+ rt2x00_set_field32(&pwreg, TX_PWR_CFG_9B_STBC_MCS7, t);
-+ rt2800_register_write(rt2x00dev, TX_PWR_CFG_9, pwreg);
-+
-+ rt2800_config_alc(rt2x00dev, chan, power_level);
-+
-+ /* TODO: temperature compensation code! */
-+}
-+
- /*
- * We configure transmit power using MAC TX_PWR_CFG_{0,...,N} registers and
- * BBP R1 register. TX_PWR_CFG_X allow to configure per rate TX power values,
-@@ -4378,6 +4810,8 @@ static void rt2800_config_txpower(struct
- {
- if (rt2x00_rt(rt2x00dev, RT3593))
- rt2800_config_txpower_rt3593(rt2x00dev, chan, power_level);
-+ else if (rt2x00_rt(rt2x00dev, RT6352))
-+ rt2800_config_txpower_rt6352(rt2x00dev, chan, power_level);
- else
- rt2800_config_txpower_rt28xx(rt2x00dev, chan, power_level);
- }
-@@ -4393,6 +4827,7 @@ void rt2800_vco_calibration(struct rt2x0
- {
- u32 tx_pin;
- u8 rfcsr;
-+ unsigned long min_sleep = 0;
-
- /*
- * A voltage-controlled oscillator(VCO) is an electronic oscillator
-@@ -4431,6 +4866,15 @@ void rt2800_vco_calibration(struct rt2x0
- rt2800_rfcsr_read(rt2x00dev, 3, &rfcsr);
- rt2x00_set_field8(&rfcsr, RFCSR3_VCOCAL_EN, 1);
- rt2800_rfcsr_write(rt2x00dev, 3, rfcsr);
-+ min_sleep = 1000;
-+ break;
-+ case RF7620:
-+ rt2800_rfcsr_write(rt2x00dev, 5, 0x40);
-+ rt2800_rfcsr_write(rt2x00dev, 4, 0x0C);
-+ rt2800_rfcsr_read(rt2x00dev, 4, &rfcsr);
-+ rt2x00_set_field8(&rfcsr, RFCSR4_VCOCAL_EN, 1);
-+ rt2800_rfcsr_write(rt2x00dev, 4, rfcsr);
-+ min_sleep = 2000;
- break;
- default:
- WARN_ONCE(1, "Not supported RF chipet %x for VCO recalibration",
-@@ -4438,7 +4882,8 @@ void rt2800_vco_calibration(struct rt2x0
- return;
- }
-
-- usleep_range(1000, 1500);
-+ if (min_sleep > 0)
-+ usleep_range(min_sleep, min_sleep * 2);
-
- rt2800_register_read(rt2x00dev, TX_PIN_CFG, &tx_pin);
- if (rt2x00dev->rf_channel <= 14) {
-@@ -4470,6 +4915,42 @@ void rt2800_vco_calibration(struct rt2x0
- }
- rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);
-
-+ if (rt2x00_rt(rt2x00dev, RT6352)) {
-+ if (rt2x00dev->default_ant.tx_chain_num == 1) {
-+ rt2800_bbp_write(rt2x00dev, 91, 0x07);
-+ rt2800_bbp_write(rt2x00dev, 95, 0x1A);
-+ rt2800_bbp_write(rt2x00dev, 195, 128);
-+ rt2800_bbp_write(rt2x00dev, 196, 0xA0);
-+ rt2800_bbp_write(rt2x00dev, 195, 170);
-+ rt2800_bbp_write(rt2x00dev, 196, 0x12);
-+ rt2800_bbp_write(rt2x00dev, 195, 171);
-+ rt2800_bbp_write(rt2x00dev, 196, 0x10);
-+ } else {
-+ rt2800_bbp_write(rt2x00dev, 91, 0x06);
-+ rt2800_bbp_write(rt2x00dev, 95, 0x9A);
-+ rt2800_bbp_write(rt2x00dev, 195, 128);
-+ rt2800_bbp_write(rt2x00dev, 196, 0xE0);
-+ rt2800_bbp_write(rt2x00dev, 195, 170);
-+ rt2800_bbp_write(rt2x00dev, 196, 0x30);
-+ rt2800_bbp_write(rt2x00dev, 195, 171);
-+ rt2800_bbp_write(rt2x00dev, 196, 0x30);
-+ }
-+
-+ if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) {
-+ rt2800_bbp_write(rt2x00dev, 75, 0x60);
-+ rt2800_bbp_write(rt2x00dev, 76, 0x44);
-+ rt2800_bbp_write(rt2x00dev, 79, 0x1C);
-+ rt2800_bbp_write(rt2x00dev, 80, 0x0C);
-+ rt2800_bbp_write(rt2x00dev, 82, 0xB6);
-+ }
-+
-+ /* On 11A, We should delay and wait RF/BBP to be stable
-+ * and the appropriate time should be 1000 micro seconds
-+ * 2005/06/05 - On 11G, we also need this delay time.
-+ * Otherwise it's difficult to pass the WHQL.
-+ */
-+ usleep_range(1000, 1500);
-+ }
- }
- EXPORT_SYMBOL_GPL(rt2800_vco_calibration);
-
-@@ -4568,7 +5049,8 @@ static u8 rt2800_get_default_vgc(struct
- rt2x00_rt(rt2x00dev, RT3593) ||
- rt2x00_rt(rt2x00dev, RT5390) ||
- rt2x00_rt(rt2x00dev, RT5392) ||
-- rt2x00_rt(rt2x00dev, RT5592))
-+ rt2x00_rt(rt2x00dev, RT5592) ||
-+ rt2x00_rt(rt2x00dev, RT6352))
- vgc = 0x1c + (2 * rt2x00dev->lna_gain);
- else
- vgc = 0x2e + rt2x00dev->lna_gain;
-@@ -4795,7 +5277,8 @@ static int rt2800_init_registers(struct
- 0x00000000);
- }
- } else if (rt2x00_rt(rt2x00dev, RT5390) ||
-- rt2x00_rt(rt2x00dev, RT5392)) {
-+ rt2x00_rt(rt2x00dev, RT5392) ||
-+ rt2x00_rt(rt2x00dev, RT6352)) {
- rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000404);
- rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
- rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
-@@ -4805,6 +5288,24 @@ static int rt2800_init_registers(struct
- rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
- } else if (rt2x00_rt(rt2x00dev, RT5350)) {
- rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000404);
-+ } else if (rt2x00_rt(rt2x00dev, RT6352)) {
-+ rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000401);
-+ rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x000C0000);
-+ rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
-+ rt2800_register_write(rt2x00dev, MIMO_PS_CFG, 0x00000002);
-+ rt2800_register_write(rt2x00dev, TX_PIN_CFG, 0x00150F0F);
-+ rt2800_register_write(rt2x00dev, TX_ALC_VGA3, 0x06060606);
-+ rt2800_register_write(rt2x00dev, TX0_BB_GAIN_ATTEN, 0x0);
-+ rt2800_register_write(rt2x00dev, TX1_BB_GAIN_ATTEN, 0x0);
-+ rt2800_register_write(rt2x00dev, TX0_RF_GAIN_ATTEN, 0x6C6C666C);
-+ rt2800_register_write(rt2x00dev, TX1_RF_GAIN_ATTEN, 0x6C6C666C);
-+ rt2800_register_write(rt2x00dev, TX0_RF_GAIN_CORRECT,
-+ 0x3630363A);
-+ rt2800_register_write(rt2x00dev, TX1_RF_GAIN_CORRECT,
-+ 0x3630363A);
-+ rt2800_register_read(rt2x00dev, TX_ALC_CFG_1, ®);
-+ rt2x00_set_field32(®, TX_ALC_CFG_1_ROS_BUSY_EN, 0);
-+ rt2800_register_write(rt2x00dev, TX_ALC_CFG_1, reg);
- } else {
- rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000000);
- rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
-@@ -5786,6 +6287,231 @@ static void rt2800_init_bbp_5592(struct
- rt2800_bbp_write(rt2x00dev, 103, 0xc0);
- }
-
-+static void rt2800_bbp_glrt_write(struct rt2x00_dev *rt2x00dev,
-+ const u8 reg, const u8 value)
-+{
-+ rt2800_bbp_write(rt2x00dev, 195, reg);
-+ rt2800_bbp_write(rt2x00dev, 196, value);
-+}
-+
-+static void rt2800_bbp_dcoc_write(struct rt2x00_dev *rt2x00dev,
-+ const u8 reg, const u8 value)
-+{
-+ rt2800_bbp_write(rt2x00dev, 158, reg);
-+ rt2800_bbp_write(rt2x00dev, 159, value);
-+}
-+
-+static void rt2800_bbp_dcoc_read(struct rt2x00_dev *rt2x00dev,
-+ const u8 reg, u8 *value)
-+{
-+ rt2800_bbp_write(rt2x00dev, 158, reg);
-+ rt2800_bbp_read(rt2x00dev, 159, value);
-+}
-+
-+static void rt2800_init_bbp_6352(struct rt2x00_dev *rt2x00dev)
-+{
-+ u8 bbp;
-+
-+ /* Apply Maximum Likelihood Detection (MLD) for 2 stream case */
-+ rt2800_bbp_read(rt2x00dev, 105, &bbp);
-+ rt2x00_set_field8(&bbp, BBP105_MLD,
-+ rt2x00dev->default_ant.rx_chain_num == 2);
-+ rt2800_bbp_write(rt2x00dev, 105, bbp);
-+
-+ /* Avoid data loss and CRC errors */
-+ rt2800_bbp4_mac_if_ctrl(rt2x00dev);
-+
-+ /* Fix I/Q swap issue */
-+ rt2800_bbp_read(rt2x00dev, 1, &bbp);
-+ bbp |= 0x04;
-+ rt2800_bbp_write(rt2x00dev, 1, bbp);
-+
-+ /* BBP for G band */
-+ rt2800_bbp_write(rt2x00dev, 3, 0x08);
-+ rt2800_bbp_write(rt2x00dev, 4, 0x00); /* rt2800_bbp4_mac_if_ctrl? */
-+ rt2800_bbp_write(rt2x00dev, 6, 0x08);
-+ rt2800_bbp_write(rt2x00dev, 14, 0x09);
-+ rt2800_bbp_write(rt2x00dev, 15, 0xFF);
-+ rt2800_bbp_write(rt2x00dev, 16, 0x01);
-+ rt2800_bbp_write(rt2x00dev, 20, 0x06);
-+ rt2800_bbp_write(rt2x00dev, 21, 0x00);
-+ rt2800_bbp_write(rt2x00dev, 22, 0x00);
-+ rt2800_bbp_write(rt2x00dev, 27, 0x00);
-+ rt2800_bbp_write(rt2x00dev, 28, 0x00);
-+ rt2800_bbp_write(rt2x00dev, 30, 0x00);
-+ rt2800_bbp_write(rt2x00dev, 31, 0x48);
-+ rt2800_bbp_write(rt2x00dev, 47, 0x40);
-+ rt2800_bbp_write(rt2x00dev, 62, 0x00);
-+ rt2800_bbp_write(rt2x00dev, 63, 0x00);
-+ rt2800_bbp_write(rt2x00dev, 64, 0x00);
-+ rt2800_bbp_write(rt2x00dev, 65, 0x2C);
-+ rt2800_bbp_write(rt2x00dev, 66, 0x1C);
-+ rt2800_bbp_write(rt2x00dev, 67, 0x20);
-+ rt2800_bbp_write(rt2x00dev, 68, 0xDD);
-+ rt2800_bbp_write(rt2x00dev, 69, 0x10);
-+ rt2800_bbp_write(rt2x00dev, 70, 0x05);
-+ rt2800_bbp_write(rt2x00dev, 73, 0x18);
-+ rt2800_bbp_write(rt2x00dev, 74, 0x0F);
-+ rt2800_bbp_write(rt2x00dev, 75, 0x60);
-+ rt2800_bbp_write(rt2x00dev, 76, 0x44);
-+ rt2800_bbp_write(rt2x00dev, 77, 0x59);
-+ rt2800_bbp_write(rt2x00dev, 78, 0x1E);
-+ rt2800_bbp_write(rt2x00dev, 79, 0x1C);
-+ rt2800_bbp_write(rt2x00dev, 80, 0x0C);
-+ rt2800_bbp_write(rt2x00dev, 81, 0x3A);
-+ rt2800_bbp_write(rt2x00dev, 82, 0xB6);
-+ rt2800_bbp_write(rt2x00dev, 83, 0x9A);
-+ rt2800_bbp_write(rt2x00dev, 84, 0x9A);
-+ rt2800_bbp_write(rt2x00dev, 86, 0x38);
-+ rt2800_bbp_write(rt2x00dev, 88, 0x90);
-+ rt2800_bbp_write(rt2x00dev, 91, 0x04);
-+ rt2800_bbp_write(rt2x00dev, 92, 0x02);
-+ rt2800_bbp_write(rt2x00dev, 95, 0x9A);
-+ rt2800_bbp_write(rt2x00dev, 96, 0x00);
-+ rt2800_bbp_write(rt2x00dev, 103, 0xC0);
-+ rt2800_bbp_write(rt2x00dev, 104, 0x92);
-+ /* FIXME BBP105 owerwrite */
-+ rt2800_bbp_write(rt2x00dev, 105, 0x3C);
-+ rt2800_bbp_write(rt2x00dev, 106, 0x12);
-+ rt2800_bbp_write(rt2x00dev, 109, 0x00);
-+ rt2800_bbp_write(rt2x00dev, 134, 0x10);
-+ rt2800_bbp_write(rt2x00dev, 135, 0xA6);
-+ rt2800_bbp_write(rt2x00dev, 137, 0x04);
-+ rt2800_bbp_write(rt2x00dev, 142, 0x30);
-+ rt2800_bbp_write(rt2x00dev, 143, 0xF7);
-+ rt2800_bbp_write(rt2x00dev, 160, 0xEC);
-+ rt2800_bbp_write(rt2x00dev, 161, 0xC4);
-+ rt2800_bbp_write(rt2x00dev, 162, 0x77);
-+ rt2800_bbp_write(rt2x00dev, 163, 0xF9);
-+ rt2800_bbp_write(rt2x00dev, 164, 0x00);
-+ rt2800_bbp_write(rt2x00dev, 165, 0x00);
-+ rt2800_bbp_write(rt2x00dev, 186, 0x00);
-+ rt2800_bbp_write(rt2x00dev, 187, 0x00);
-+ rt2800_bbp_write(rt2x00dev, 188, 0x00);
-+ rt2800_bbp_write(rt2x00dev, 186, 0x00);
-+ rt2800_bbp_write(rt2x00dev, 187, 0x01);
-+ rt2800_bbp_write(rt2x00dev, 188, 0x00);
-+ rt2800_bbp_write(rt2x00dev, 189, 0x00);
-+
-+ rt2800_bbp_write(rt2x00dev, 91, 0x06);
-+ rt2800_bbp_write(rt2x00dev, 92, 0x04);
-+ rt2800_bbp_write(rt2x00dev, 93, 0x54);
-+ rt2800_bbp_write(rt2x00dev, 99, 0x50);
-+ rt2800_bbp_write(rt2x00dev, 148, 0x84);
-+ rt2800_bbp_write(rt2x00dev, 167, 0x80);
-+ rt2800_bbp_write(rt2x00dev, 178, 0xFF);
-+ rt2800_bbp_write(rt2x00dev, 106, 0x13);
-+
-+ /* BBP for G band GLRT function (BBP_128 ~ BBP_221) */
-+ rt2800_bbp_glrt_write(rt2x00dev, 0, 0x00);
-+ rt2800_bbp_glrt_write(rt2x00dev, 1, 0x14);
-+ rt2800_bbp_glrt_write(rt2x00dev, 2, 0x20);
-+ rt2800_bbp_glrt_write(rt2x00dev, 3, 0x0A);
-+ rt2800_bbp_glrt_write(rt2x00dev, 10, 0x16);
-+ rt2800_bbp_glrt_write(rt2x00dev, 11, 0x06);
-+ rt2800_bbp_glrt_write(rt2x00dev, 12, 0x02);
-+ rt2800_bbp_glrt_write(rt2x00dev, 13, 0x07);
-+ rt2800_bbp_glrt_write(rt2x00dev, 14, 0x05);
-+ rt2800_bbp_glrt_write(rt2x00dev, 15, 0x09);
-+ rt2800_bbp_glrt_write(rt2x00dev, 16, 0x20);
-+ rt2800_bbp_glrt_write(rt2x00dev, 17, 0x08);
-+ rt2800_bbp_glrt_write(rt2x00dev, 18, 0x4A);
-+ rt2800_bbp_glrt_write(rt2x00dev, 19, 0x00);
-+ rt2800_bbp_glrt_write(rt2x00dev, 20, 0x00);
-+ rt2800_bbp_glrt_write(rt2x00dev, 128, 0xE0);
-+ rt2800_bbp_glrt_write(rt2x00dev, 129, 0x1F);
-+ rt2800_bbp_glrt_write(rt2x00dev, 130, 0x4F);
-+ rt2800_bbp_glrt_write(rt2x00dev, 131, 0x32);
-+ rt2800_bbp_glrt_write(rt2x00dev, 132, 0x08);
-+ rt2800_bbp_glrt_write(rt2x00dev, 133, 0x28);
-+ rt2800_bbp_glrt_write(rt2x00dev, 134, 0x19);
-+ rt2800_bbp_glrt_write(rt2x00dev, 135, 0x0A);
-+ rt2800_bbp_glrt_write(rt2x00dev, 138, 0x16);
-+ rt2800_bbp_glrt_write(rt2x00dev, 139, 0x10);
-+ rt2800_bbp_glrt_write(rt2x00dev, 140, 0x10);
-+ rt2800_bbp_glrt_write(rt2x00dev, 141, 0x1A);
-+ rt2800_bbp_glrt_write(rt2x00dev, 142, 0x36);
-+ rt2800_bbp_glrt_write(rt2x00dev, 143, 0x2C);
-+ rt2800_bbp_glrt_write(rt2x00dev, 144, 0x26);
-+ rt2800_bbp_glrt_write(rt2x00dev, 145, 0x24);
-+ rt2800_bbp_glrt_write(rt2x00dev, 146, 0x42);
-+ rt2800_bbp_glrt_write(rt2x00dev, 147, 0x40);
-+ rt2800_bbp_glrt_write(rt2x00dev, 148, 0x30);
-+ rt2800_bbp_glrt_write(rt2x00dev, 149, 0x29);
-+ rt2800_bbp_glrt_write(rt2x00dev, 150, 0x4C);
-+ rt2800_bbp_glrt_write(rt2x00dev, 151, 0x46);
-+ rt2800_bbp_glrt_write(rt2x00dev, 152, 0x3D);
-+ rt2800_bbp_glrt_write(rt2x00dev, 153, 0x40);
-+ rt2800_bbp_glrt_write(rt2x00dev, 154, 0x3E);
-+ rt2800_bbp_glrt_write(rt2x00dev, 155, 0x38);
-+ rt2800_bbp_glrt_write(rt2x00dev, 156, 0x3D);
-+ rt2800_bbp_glrt_write(rt2x00dev, 157, 0x2F);
-+ rt2800_bbp_glrt_write(rt2x00dev, 158, 0x3C);
-+ rt2800_bbp_glrt_write(rt2x00dev, 159, 0x34);
-+ rt2800_bbp_glrt_write(rt2x00dev, 160, 0x2C);
-+ rt2800_bbp_glrt_write(rt2x00dev, 161, 0x2F);
-+ rt2800_bbp_glrt_write(rt2x00dev, 162, 0x3C);
-+ rt2800_bbp_glrt_write(rt2x00dev, 163, 0x35);
-+ rt2800_bbp_glrt_write(rt2x00dev, 164, 0x2E);
-+ rt2800_bbp_glrt_write(rt2x00dev, 165, 0x2F);
-+ rt2800_bbp_glrt_write(rt2x00dev, 166, 0x49);
-+ rt2800_bbp_glrt_write(rt2x00dev, 167, 0x41);
-+ rt2800_bbp_glrt_write(rt2x00dev, 168, 0x36);
-+ rt2800_bbp_glrt_write(rt2x00dev, 169, 0x39);
-+ rt2800_bbp_glrt_write(rt2x00dev, 170, 0x30);
-+ rt2800_bbp_glrt_write(rt2x00dev, 171, 0x30);
-+ rt2800_bbp_glrt_write(rt2x00dev, 172, 0x0E);
-+ rt2800_bbp_glrt_write(rt2x00dev, 173, 0x0D);
-+ rt2800_bbp_glrt_write(rt2x00dev, 174, 0x28);
-+ rt2800_bbp_glrt_write(rt2x00dev, 175, 0x21);
-+ rt2800_bbp_glrt_write(rt2x00dev, 176, 0x1C);
-+ rt2800_bbp_glrt_write(rt2x00dev, 177, 0x16);
-+ rt2800_bbp_glrt_write(rt2x00dev, 178, 0x50);
-+ rt2800_bbp_glrt_write(rt2x00dev, 179, 0x4A);
-+ rt2800_bbp_glrt_write(rt2x00dev, 180, 0x43);
-+ rt2800_bbp_glrt_write(rt2x00dev, 181, 0x50);
-+ rt2800_bbp_glrt_write(rt2x00dev, 182, 0x10);
-+ rt2800_bbp_glrt_write(rt2x00dev, 183, 0x10);
-+ rt2800_bbp_glrt_write(rt2x00dev, 184, 0x10);
-+ rt2800_bbp_glrt_write(rt2x00dev, 185, 0x10);
-+ rt2800_bbp_glrt_write(rt2x00dev, 200, 0x7D);
-+ rt2800_bbp_glrt_write(rt2x00dev, 201, 0x14);
-+ rt2800_bbp_glrt_write(rt2x00dev, 202, 0x32);
-+ rt2800_bbp_glrt_write(rt2x00dev, 203, 0x2C);
-+ rt2800_bbp_glrt_write(rt2x00dev, 204, 0x36);
-+ rt2800_bbp_glrt_write(rt2x00dev, 205, 0x4C);
-+ rt2800_bbp_glrt_write(rt2x00dev, 206, 0x43);
-+ rt2800_bbp_glrt_write(rt2x00dev, 207, 0x2C);
-+ rt2800_bbp_glrt_write(rt2x00dev, 208, 0x2E);
-+ rt2800_bbp_glrt_write(rt2x00dev, 209, 0x36);
-+ rt2800_bbp_glrt_write(rt2x00dev, 210, 0x30);
-+ rt2800_bbp_glrt_write(rt2x00dev, 211, 0x6E);
-+
-+ /* BBP for G band DCOC function */
-+ rt2800_bbp_dcoc_write(rt2x00dev, 140, 0x0C);
-+ rt2800_bbp_dcoc_write(rt2x00dev, 141, 0x00);
-+ rt2800_bbp_dcoc_write(rt2x00dev, 142, 0x10);
-+ rt2800_bbp_dcoc_write(rt2x00dev, 143, 0x10);
-+ rt2800_bbp_dcoc_write(rt2x00dev, 144, 0x10);
-+ rt2800_bbp_dcoc_write(rt2x00dev, 145, 0x10);
-+ rt2800_bbp_dcoc_write(rt2x00dev, 146, 0x08);
-+ rt2800_bbp_dcoc_write(rt2x00dev, 147, 0x40);
-+ rt2800_bbp_dcoc_write(rt2x00dev, 148, 0x04);
-+ rt2800_bbp_dcoc_write(rt2x00dev, 149, 0x04);
-+ rt2800_bbp_dcoc_write(rt2x00dev, 150, 0x08);
-+ rt2800_bbp_dcoc_write(rt2x00dev, 151, 0x08);
-+ rt2800_bbp_dcoc_write(rt2x00dev, 152, 0x03);
-+ rt2800_bbp_dcoc_write(rt2x00dev, 153, 0x03);
-+ rt2800_bbp_dcoc_write(rt2x00dev, 154, 0x03);
-+ rt2800_bbp_dcoc_write(rt2x00dev, 155, 0x02);
-+ rt2800_bbp_dcoc_write(rt2x00dev, 156, 0x40);
-+ rt2800_bbp_dcoc_write(rt2x00dev, 157, 0x40);
-+ rt2800_bbp_dcoc_write(rt2x00dev, 158, 0x64);
-+ rt2800_bbp_dcoc_write(rt2x00dev, 159, 0x64);
-+
-+ rt2800_bbp4_mac_if_ctrl(rt2x00dev);
-+}
-+
- static void rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
- {
- unsigned int i;
-@@ -5830,6 +6556,9 @@ static void rt2800_init_bbp(struct rt2x0
- case RT5592:
- rt2800_init_bbp_5592(rt2x00dev);
- return;
-+ case RT6352:
-+ rt2800_init_bbp_6352(rt2x00dev);
-+ break;
- }
-
- for (i = 0; i < EEPROM_BBP_SIZE; i++) {
-@@ -6901,6 +7630,615 @@ static void rt2800_init_rfcsr_5592(struc
- rt2800_led_open_drain_enable(rt2x00dev);
- }
-
-+static void rt2800_bbp_core_soft_reset(struct rt2x00_dev *rt2x00dev,
-+ bool set_bw, bool is_ht40)
-+{
-+ u8 bbp_val;
-+
-+ rt2800_bbp_read(rt2x00dev, 21, &bbp_val);
-+ bbp_val |= 0x1;
-+ rt2800_bbp_write(rt2x00dev, 21, bbp_val);
-+ usleep_range(100, 200);
-+
-+ if (set_bw) {
-+ rt2800_bbp_read(rt2x00dev, 4, &bbp_val);
-+ rt2x00_set_field8(&bbp_val, BBP4_BANDWIDTH, 2 * is_ht40);
-+ rt2800_bbp_write(rt2x00dev, 4, bbp_val);
-+ usleep_range(100, 200);
-+ }
-+
-+ rt2800_bbp_read(rt2x00dev, 21, &bbp_val);
-+ bbp_val &= (~0x1);
-+ rt2800_bbp_write(rt2x00dev, 21, bbp_val);
-+ usleep_range(100, 200);
-+}
-+
-+static int rt2800_rf_lp_config(struct rt2x00_dev *rt2x00dev, bool btxcal)
-+{
-+ u8 rf_val;
-+
-+ if (btxcal)
-+ rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x04);
-+ else
-+ rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x02);
-+
-+ rt2800_register_write(rt2x00dev, RF_BYPASS0, 0x06);
-+
-+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 17, &rf_val);
-+ rf_val |= 0x80;
-+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 17, rf_val);
-+
-+ if (btxcal) {
-+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 18, 0xC1);
-+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 19, 0x20);
-+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 20, 0x02);
-+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 3, &rf_val);
-+ rf_val &= (~0x3F);
-+ rf_val |= 0x3F;
-+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 3, rf_val);
-+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 4, &rf_val);
-+ rf_val &= (~0x3F);
-+ rf_val |= 0x3F;
-+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 4, rf_val);
-+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 5, 0x31);
-+ } else {
-+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 18, 0xF1);
-+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 19, 0x18);
-+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 20, 0x02);
-+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 3, &rf_val);
-+ rf_val &= (~0x3F);
-+ rf_val |= 0x34;
-+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 3, rf_val);
-+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 4, &rf_val);
-+ rf_val &= (~0x3F);
-+ rf_val |= 0x34;
-+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 4, rf_val);
-+ }
-+
-+ return 0;
-+}
-+
-+static char rt2800_lp_tx_filter_bw_cal(struct rt2x00_dev *rt2x00dev)
-+{
-+ unsigned int cnt;
-+ u8 bbp_val;
-+ char cal_val;
-+
-+ rt2800_bbp_dcoc_write(rt2x00dev, 0, 0x82);
-+
-+ cnt = 0;
-+ do {
-+ usleep_range(500, 2000);
-+ rt2800_bbp_read(rt2x00dev, 159, &bbp_val);
-+ if (bbp_val == 0x02 || cnt == 20)
-+ break;
-+
-+ cnt++;
-+ } while (cnt < 20);
-+
-+ rt2800_bbp_dcoc_read(rt2x00dev, 0x39, &bbp_val);
-+ cal_val = bbp_val & 0x7F;
-+ if (cal_val >= 0x40)
-+ cal_val -= 128;
-+
-+ return cal_val;
-+}
-+
-+static void rt2800_bw_filter_calibration(struct rt2x00_dev *rt2x00dev,
-+ bool btxcal)
-+{
-+ struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
-+ u8 tx_agc_fc = 0, rx_agc_fc = 0, cmm_agc_fc;
-+ u8 filter_target;
-+ u8 tx_filter_target_20m = 0x09, tx_filter_target_40m = 0x02;
-+ u8 rx_filter_target_20m = 0x27, rx_filter_target_40m = 0x31;
-+ int loop = 0, is_ht40, cnt;
-+ u8 bbp_val, rf_val;
-+ char cal_r32_init, cal_r32_val, cal_diff;
-+ u8 saverfb5r00, saverfb5r01, saverfb5r03, saverfb5r04, saverfb5r05;
-+ u8 saverfb5r06, saverfb5r07;
-+ u8 saverfb5r08, saverfb5r17, saverfb5r18, saverfb5r19, saverfb5r20;
-+ u8 saverfb5r37, saverfb5r38, saverfb5r39, saverfb5r40, saverfb5r41;
-+ u8 saverfb5r42, saverfb5r43, saverfb5r44, saverfb5r45, saverfb5r46;
-+ u8 saverfb5r58, saverfb5r59;
-+ u8 savebbp159r0, savebbp159r2, savebbpr23;
-+ u32 MAC_RF_CONTROL0, MAC_RF_BYPASS0;
-+
-+ /* Save MAC registers */
-+ rt2800_register_read(rt2x00dev, RF_CONTROL0, &MAC_RF_CONTROL0);
-+ rt2800_register_read(rt2x00dev, RF_BYPASS0, &MAC_RF_BYPASS0);
-+
-+ /* save BBP registers */
-+ rt2800_bbp_read(rt2x00dev, 23, &savebbpr23);
-+
-+ rt2800_bbp_dcoc_read(rt2x00dev, 0, &savebbp159r0);
-+ rt2800_bbp_dcoc_read(rt2x00dev, 2, &savebbp159r2);
-+
-+ /* Save RF registers */
-+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 0, &saverfb5r00);
-+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 1, &saverfb5r01);
-+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 3, &saverfb5r03);
-+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 4, &saverfb5r04);
-+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 5, &saverfb5r05);
-+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 6, &saverfb5r06);
-+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 7, &saverfb5r07);
-+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 8, &saverfb5r08);
-+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 17, &saverfb5r17);
-+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 18, &saverfb5r18);
-+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 19, &saverfb5r19);
-+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 20, &saverfb5r20);
-+
-+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 37, &saverfb5r37);
-+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 38, &saverfb5r38);
-+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 39, &saverfb5r39);
-+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 40, &saverfb5r40);
-+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 41, &saverfb5r41);
-+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 42, &saverfb5r42);
-+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 43, &saverfb5r43);
-+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 44, &saverfb5r44);
-+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 45, &saverfb5r45);
-+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 46, &saverfb5r46);
-+
-+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 58, &saverfb5r58);
-+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 59, &saverfb5r59);
-+
-+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 0, &rf_val);
-+ rf_val |= 0x3;
-+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 0, rf_val);
-+
-+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 1, &rf_val);
-+ rf_val |= 0x1;
-+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 1, rf_val);
-+
-+ cnt = 0;
-+ do {
-+ usleep_range(500, 2000);
-+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 1, &rf_val);
-+ if (((rf_val & 0x1) == 0x00) || (cnt == 40))
-+ break;
-+ cnt++;
-+ } while (cnt < 40);
-+
-+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 0, &rf_val);
-+ rf_val &= (~0x3);
-+ rf_val |= 0x1;
-+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 0, rf_val);
-+
-+ /* I-3 */
-+ rt2800_bbp_read(rt2x00dev, 23, &bbp_val);
-+ bbp_val &= (~0x1F);
-+ bbp_val |= 0x10;
-+ rt2800_bbp_write(rt2x00dev, 23, bbp_val);
-+
-+ do {
-+ /* I-4,5,6,7,8,9 */
-+ if (loop == 0) {
-+ is_ht40 = false;
-+
-+ if (btxcal)
-+ filter_target = tx_filter_target_20m;
-+ else
-+ filter_target = rx_filter_target_20m;
-+ } else {
-+ is_ht40 = true;
-+
-+ if (btxcal)
-+ filter_target = tx_filter_target_40m;
-+ else
-+ filter_target = rx_filter_target_40m;
-+ }
-+
-+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 8, &rf_val);
-+ rf_val &= (~0x04);
-+ if (loop == 1)
-+ rf_val |= 0x4;
-+
-+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 8, rf_val);
-+
-+ rt2800_bbp_core_soft_reset(rt2x00dev, true, is_ht40);
-+
-+ rt2800_rf_lp_config(rt2x00dev, btxcal);
-+ if (btxcal) {
-+ tx_agc_fc = 0;
-+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 58, &rf_val);
-+ rf_val &= (~0x7F);
-+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 58, rf_val);
-+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 59, &rf_val);
-+ rf_val &= (~0x7F);
-+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 59, rf_val);
-+ } else {
-+ rx_agc_fc = 0;
-+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 6, &rf_val);
-+ rf_val &= (~0x7F);
-+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 6, rf_val);
-+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 7, &rf_val);
-+ rf_val &= (~0x7F);
-+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 7, rf_val);
-+ }
-+
-+ usleep_range(1000, 2000);
-+
-+ rt2800_bbp_dcoc_read(rt2x00dev, 2, &bbp_val);
-+ bbp_val &= (~0x6);
-+ rt2800_bbp_dcoc_write(rt2x00dev, 2, bbp_val);
-+
-+ rt2800_bbp_core_soft_reset(rt2x00dev, false, is_ht40);
-+
-+ cal_r32_init = rt2800_lp_tx_filter_bw_cal(rt2x00dev);
-+
-+ rt2800_bbp_dcoc_read(rt2x00dev, 2, &bbp_val);
-+ bbp_val |= 0x6;
-+ rt2800_bbp_dcoc_write(rt2x00dev, 2, bbp_val);
-+do_cal:
-+ if (btxcal) {
-+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 58, &rf_val);
-+ rf_val &= (~0x7F);
-+ rf_val |= tx_agc_fc;
-+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 58, rf_val);
-+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 59, &rf_val);
-+ rf_val &= (~0x7F);
-+ rf_val |= tx_agc_fc;
-+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 59, rf_val);
-+ } else {
-+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 6, &rf_val);
-+ rf_val &= (~0x7F);
-+ rf_val |= rx_agc_fc;
-+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 6, rf_val);
-+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 7, &rf_val);
-+ rf_val &= (~0x7F);
-+ rf_val |= rx_agc_fc;
-+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 7, rf_val);
-+ }
-+
-+ usleep_range(500, 1000);
-+
-+ rt2800_bbp_core_soft_reset(rt2x00dev, false, is_ht40);
-+
-+ cal_r32_val = rt2800_lp_tx_filter_bw_cal(rt2x00dev);
-+
-+ cal_diff = cal_r32_init - cal_r32_val;
-+
-+ if (btxcal)
-+ cmm_agc_fc = tx_agc_fc;
-+ else
-+ cmm_agc_fc = rx_agc_fc;
-+
-+ if (((cal_diff > filter_target) && (cmm_agc_fc == 0)) ||
-+ ((cal_diff < filter_target) && (cmm_agc_fc == 0x3f))) {
-+ if (btxcal)
-+ tx_agc_fc = 0;
-+ else
-+ rx_agc_fc = 0;
-+ } else if ((cal_diff <= filter_target) && (cmm_agc_fc < 0x3f)) {
-+ if (btxcal)
-+ tx_agc_fc++;
-+ else
-+ rx_agc_fc++;
-+ goto do_cal;
-+ }
-+
-+ if (btxcal) {
-+ if (loop == 0)
-+ drv_data->tx_calibration_bw20 = tx_agc_fc;
-+ else
-+ drv_data->tx_calibration_bw40 = tx_agc_fc;
-+ } else {
-+ if (loop == 0)
-+ drv_data->rx_calibration_bw20 = rx_agc_fc;
-+ else
-+ drv_data->rx_calibration_bw40 = rx_agc_fc;
-+ }
-+
-+ loop++;
-+ } while (loop <= 1);
-+
-+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 0, saverfb5r00);
-+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 1, saverfb5r01);
-+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 3, saverfb5r03);
-+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 4, saverfb5r04);
-+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 5, saverfb5r05);
-+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 6, saverfb5r06);
-+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 7, saverfb5r07);
-+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 8, saverfb5r08);
-+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 17, saverfb5r17);
-+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 18, saverfb5r18);
-+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 19, saverfb5r19);
-+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 20, saverfb5r20);
-+
-+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 37, saverfb5r37);
-+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 38, saverfb5r38);
-+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 39, saverfb5r39);
-+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 40, saverfb5r40);
-+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 41, saverfb5r41);
-+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 42, saverfb5r42);
-+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 43, saverfb5r43);
-+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 44, saverfb5r44);
-+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 45, saverfb5r45);
-+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 46, saverfb5r46);
-+
-+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 58, saverfb5r58);
-+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 59, saverfb5r59);
-+
-+ rt2800_bbp_write(rt2x00dev, 23, savebbpr23);
-+
-+ rt2800_bbp_dcoc_write(rt2x00dev, 0, savebbp159r0);
-+ rt2800_bbp_dcoc_write(rt2x00dev, 2, savebbp159r2);
-+
-+ rt2800_bbp_read(rt2x00dev, 4, &bbp_val);
-+ rt2x00_set_field8(&bbp_val, BBP4_BANDWIDTH,
-+ 2 * test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags));
-+ rt2800_bbp_write(rt2x00dev, 4, bbp_val);
-+
-+ rt2800_register_write(rt2x00dev, RF_CONTROL0, MAC_RF_CONTROL0);
-+ rt2800_register_write(rt2x00dev, RF_BYPASS0, MAC_RF_BYPASS0);
-+}
-+
-+static void rt2800_init_rfcsr_6352(struct rt2x00_dev *rt2x00dev)
-+{
-+ /* Initialize RF central register to default value */
-+ rt2800_rfcsr_write(rt2x00dev, 0, 0x02);
-+ rt2800_rfcsr_write(rt2x00dev, 1, 0x03);
-+ rt2800_rfcsr_write(rt2x00dev, 2, 0x33);
-+ rt2800_rfcsr_write(rt2x00dev, 3, 0xFF);
-+ rt2800_rfcsr_write(rt2x00dev, 4, 0x0C);
-+ rt2800_rfcsr_write(rt2x00dev, 5, 0x40);
-+ rt2800_rfcsr_write(rt2x00dev, 6, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 7, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 8, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 9, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 10, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 11, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 12, rt2x00dev->freq_offset);
-+ rt2800_rfcsr_write(rt2x00dev, 13, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 14, 0x40);
-+ rt2800_rfcsr_write(rt2x00dev, 15, 0x22);
-+ rt2800_rfcsr_write(rt2x00dev, 16, 0x4C);
-+ rt2800_rfcsr_write(rt2x00dev, 17, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 18, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 19, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 20, 0xA0);
-+ rt2800_rfcsr_write(rt2x00dev, 21, 0x12);
-+ rt2800_rfcsr_write(rt2x00dev, 22, 0x07);
-+ rt2800_rfcsr_write(rt2x00dev, 23, 0x13);
-+ rt2800_rfcsr_write(rt2x00dev, 24, 0xFE);
-+ rt2800_rfcsr_write(rt2x00dev, 25, 0x24);
-+ rt2800_rfcsr_write(rt2x00dev, 26, 0x7A);
-+ rt2800_rfcsr_write(rt2x00dev, 27, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 28, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 29, 0x05);
-+ rt2800_rfcsr_write(rt2x00dev, 30, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 31, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 32, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 33, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 34, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 35, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 36, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 37, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 38, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 39, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 40, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 41, 0xD0);
-+ rt2800_rfcsr_write(rt2x00dev, 42, 0x5B);
-+ rt2800_rfcsr_write(rt2x00dev, 43, 0x00);
-+
-+ rt2800_rfcsr_write(rt2x00dev, 11, 0x21);
-+ if (rt2800_clk_is_20mhz(rt2x00dev))
-+ rt2800_rfcsr_write(rt2x00dev, 13, 0x03);
-+ else
-+ rt2800_rfcsr_write(rt2x00dev, 13, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 14, 0x7C);
-+ rt2800_rfcsr_write(rt2x00dev, 16, 0x80);
-+ rt2800_rfcsr_write(rt2x00dev, 17, 0x99);
-+ rt2800_rfcsr_write(rt2x00dev, 18, 0x99);
-+ rt2800_rfcsr_write(rt2x00dev, 19, 0x09);
-+ rt2800_rfcsr_write(rt2x00dev, 20, 0x50);
-+ rt2800_rfcsr_write(rt2x00dev, 21, 0xB0);
-+ rt2800_rfcsr_write(rt2x00dev, 22, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 23, 0x06);
-+ rt2800_rfcsr_write(rt2x00dev, 24, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 25, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 26, 0x5D);
-+ rt2800_rfcsr_write(rt2x00dev, 27, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 28, 0x61);
-+ rt2800_rfcsr_write(rt2x00dev, 29, 0xB5);
-+ rt2800_rfcsr_write(rt2x00dev, 43, 0x02);
-+
-+ rt2800_rfcsr_write(rt2x00dev, 28, 0x62);
-+ rt2800_rfcsr_write(rt2x00dev, 29, 0xAD);
-+ rt2800_rfcsr_write(rt2x00dev, 39, 0x80);
-+
-+ /* Initialize RF channel register to default value */
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 0, 0x03);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 1, 0x00);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 2, 0x00);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 3, 0x00);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 4, 0x00);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 5, 0x08);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 6, 0x00);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 7, 0x51);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 8, 0x53);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 9, 0x16);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 10, 0x61);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 11, 0x53);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 12, 0x22);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 13, 0x3D);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 14, 0x06);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 15, 0x13);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 16, 0x22);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 17, 0x27);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 18, 0x02);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 19, 0xA7);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 20, 0x01);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 21, 0x52);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 22, 0x80);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 23, 0xB3);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 24, 0x00);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 25, 0x00);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 26, 0x00);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 27, 0x00);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 28, 0x5C);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 29, 0x6B);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 30, 0x6B);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 31, 0x31);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 32, 0x5D);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 33, 0x00);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 34, 0xE6);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 35, 0x55);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 36, 0x00);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 37, 0xBB);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 38, 0xB3);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 39, 0xB3);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 40, 0x03);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 41, 0x00);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 42, 0x00);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 43, 0xB3);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 44, 0xD3);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 45, 0xD5);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 46, 0x07);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 47, 0x68);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 48, 0xEF);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 49, 0x1C);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 54, 0x07);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 55, 0xA8);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 56, 0x85);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 57, 0x10);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 58, 0x07);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 59, 0x6A);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 60, 0x85);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 61, 0x10);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 62, 0x1C);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 63, 0x00);
-+
-+ rt2800_rfcsr_write_bank(rt2x00dev, 6, 45, 0xC5);
-+
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 9, 0x47);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 10, 0x71);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 11, 0x33);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 14, 0x0E);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 17, 0x23);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 19, 0xA4);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 20, 0x02);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 21, 0x12);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 28, 0x1C);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 29, 0xEB);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 32, 0x7D);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 34, 0xD6);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 36, 0x08);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 38, 0xB4);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 43, 0xD3);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 44, 0xB3);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 45, 0xD5);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 46, 0x27);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 47, 0x69);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 48, 0xFF);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 54, 0x20);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 55, 0x66);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 56, 0xFF);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 57, 0x1C);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 58, 0x20);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 59, 0x6B);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 60, 0xF7);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 61, 0x09);
-+
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 10, 0x51);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 14, 0x06);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 19, 0xA7);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 28, 0x2C);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 55, 0x64);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 8, 0x51);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 9, 0x36);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 11, 0x53);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 14, 0x16);
-+
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 47, 0x6C);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 48, 0xFC);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 49, 0x1F);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 54, 0x27);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 55, 0x66);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 59, 0x6B);
-+
-+ /* Initialize RF channel register for DRQFN */
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 43, 0xD3);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 44, 0xE3);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 45, 0xE5);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 47, 0x28);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 55, 0x68);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 56, 0xF7);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 58, 0x02);
-+ rt2800_rfcsr_write_chanreg(rt2x00dev, 60, 0xC7);
-+
-+ /* Initialize RF DC calibration register to default value */
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 0, 0x47);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 1, 0x00);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 2, 0x00);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 3, 0x00);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 4, 0x00);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 5, 0x00);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 6, 0x10);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 7, 0x10);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 8, 0x04);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 9, 0x00);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 10, 0x07);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 11, 0x01);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 12, 0x07);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 13, 0x07);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 14, 0x07);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 15, 0x20);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 16, 0x22);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 17, 0x00);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 18, 0x00);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 19, 0x00);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 20, 0x00);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 21, 0xF1);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 22, 0x11);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 23, 0x02);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 24, 0x41);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 25, 0x20);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 26, 0x00);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 27, 0xD7);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 28, 0xA2);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 29, 0x20);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 30, 0x49);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 31, 0x20);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 32, 0x04);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 33, 0xF1);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 34, 0xA1);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 35, 0x01);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 41, 0x00);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 42, 0x00);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 43, 0x00);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 44, 0x00);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 45, 0x00);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 46, 0x00);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 47, 0x3E);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 48, 0x3D);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 49, 0x3E);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 50, 0x3D);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 51, 0x3E);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 52, 0x3D);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 53, 0x00);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 54, 0x00);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 55, 0x00);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 56, 0x00);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 57, 0x00);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 58, 0x10);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 59, 0x10);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 60, 0x0A);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 61, 0x00);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 62, 0x00);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 63, 0x00);
-+
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 3, 0x08);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 4, 0x04);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 5, 0x20);
-+
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 5, 0x00);
-+ rt2800_rfcsr_write_dccal(rt2x00dev, 17, 0x7C);
-+
-+ rt2800_bw_filter_calibration(rt2x00dev, true);
-+ rt2800_bw_filter_calibration(rt2x00dev, false);
-+}
-+
- static void rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
- {
- if (rt2800_is_305x_soc(rt2x00dev)) {
-@@ -6941,6 +8279,9 @@ static void rt2800_init_rfcsr(struct rt2
- case RT5592:
- rt2800_init_rfcsr_5592(rt2x00dev);
- break;
-+ case RT6352:
-+ rt2800_init_rfcsr_6352(rt2x00dev);
-+ break;
- }
- }
-
-@@ -7307,7 +8648,8 @@ static int rt2800_init_eeprom(struct rt2
- */
- if (rt2x00_rt(rt2x00dev, RT3290) ||
- rt2x00_rt(rt2x00dev, RT5390) ||
-- rt2x00_rt(rt2x00dev, RT5392))
-+ rt2x00_rt(rt2x00dev, RT5392) ||
-+ rt2x00_rt(rt2x00dev, RT6352))
- rt2800_eeprom_read(rt2x00dev, EEPROM_CHIP_ID, &rf);
- else if (rt2x00_rt(rt2x00dev, RT3352))
- rf = RF3322;
-@@ -7339,6 +8681,7 @@ static int rt2800_init_eeprom(struct rt2
- case RF5390:
- case RF5392:
- case RF5592:
-+ case RF7620:
- break;
- default:
- rt2x00_err(rt2x00dev, "Invalid RF chipset 0x%04x detected\n",
-@@ -7746,6 +9089,23 @@ static const struct rf_channel rf_vals_5
- {196, 83, 0, 12, 1},
- };
-
-+static const struct rf_channel rf_vals_7620[] = {
-+ {1, 0x50, 0x99, 0x99, 1},
-+ {2, 0x50, 0x44, 0x44, 2},
-+ {3, 0x50, 0xEE, 0xEE, 2},
-+ {4, 0x50, 0x99, 0x99, 3},
-+ {5, 0x51, 0x44, 0x44, 0},
-+ {6, 0x51, 0xEE, 0xEE, 0},
-+ {7, 0x51, 0x99, 0x99, 1},
-+ {8, 0x51, 0x44, 0x44, 2},
-+ {9, 0x51, 0xEE, 0xEE, 2},
-+ {10, 0x51, 0x99, 0x99, 3},
-+ {11, 0x52, 0x44, 0x44, 0},
-+ {12, 0x52, 0xEE, 0xEE, 0},
-+ {13, 0x52, 0x99, 0x99, 1},
-+ {14, 0x52, 0x33, 0x33, 3},
-+};
-+
- static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
- {
- struct hw_mode_spec *spec = &rt2x00dev->spec;
-@@ -7849,6 +9209,11 @@ static int rt2800_probe_hw_mode(struct r
- spec->channels = rf_vals_3x;
- break;
-
-+ case RF7620:
-+ spec->num_channels = ARRAY_SIZE(rf_vals_7620);
-+ spec->channels = rf_vals_7620;
-+ break;
-+
- case RF3052:
- case RF3053:
- spec->num_channels = ARRAY_SIZE(rf_vals_3x);
-@@ -7980,6 +9345,7 @@ static int rt2800_probe_hw_mode(struct r
- case RF5390:
- case RF5392:
- case RF5592:
-+ case RF7620:
- __set_bit(CAPABILITY_VCO_RECALIBRATION, &rt2x00dev->cap_flags);
- break;
- }
-@@ -8024,6 +9390,9 @@ static int rt2800_probe_rt(struct rt2x00
- return -ENODEV;
- }
-
-+ if (rt == RT5390 && rt2x00_is_soc(rt2x00dev))
-+ rt = RT6352;
-+
- rt2x00_set_rt(rt2x00dev, rt, rev);
-
- return 0;
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
-@@ -33,6 +33,10 @@
- struct rt2800_drv_data {
- u8 calibration_bw20;
- u8 calibration_bw40;
-+ char rx_calibration_bw20;
-+ char rx_calibration_bw40;
-+ char tx_calibration_bw20;
-+ char tx_calibration_bw40;
- u8 bbp25;
- u8 bbp26;
- u8 txmixer_gain_24g;
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
-@@ -174,6 +174,7 @@ struct rt2x00_chip {
- #define RT5390 0x5390 /* 2.4GHz */
- #define RT5392 0x5392 /* 2.4GHz */
- #define RT5592 0x5592
-+#define RT6352 0x6352 /* WSOC 2.4GHz */
-
- u16 rf;
- u16 rev;
diff --git a/package/kernel/mac80211/patches/020-20-rt2x00-reverse-external-PA-capability-flag-logic.patch b/package/kernel/mac80211/patches/020-20-rt2x00-reverse-external-PA-capability-flag-logic.patch
deleted file mode 100644
index 7994456de7..0000000000
--- a/package/kernel/mac80211/patches/020-20-rt2x00-reverse-external-PA-capability-flag-logic.patch
+++ /dev/null
@@ -1,121 +0,0 @@
-From 1f242a3de702d5a19c479685d35b050837122724 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel at makrotopia.org>
-Date: Mon, 10 Apr 2017 15:29:45 +0200
-Subject: [PATCH] rt2x00: reverse external PA capability flag logic
-
-Consequently refer to external PA instead of inverting the logic and
-use an internal PA capability flag which is a bit confusing.
-Currently this is used for Rt3352 only, but MT7620A also allows for an
-external PA which will be supported by a follow up patch.
-
-Signed-off-by: Daniel Golle <daniel at makrotopia.org>
-Acked-by: Stanislaw Gruszka <sgruszka at redhat.com>
-Signed-off-by: Kalle Valo <kvalo at codeaurora.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 40 +++++++++++++-------------
- drivers/net/wireless/ralink/rt2x00/rt2x00.h | 4 +--
- 2 files changed, 22 insertions(+), 22 deletions(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -7014,9 +7014,9 @@ static void rt2800_init_rfcsr_3290(struc
-
- static void rt2800_init_rfcsr_3352(struct rt2x00_dev *rt2x00dev)
- {
-- int tx0_int_pa = test_bit(CAPABILITY_INTERNAL_PA_TX0,
-+ int tx0_ext_pa = test_bit(CAPABILITY_EXTERNAL_PA_TX0,
- &rt2x00dev->cap_flags);
-- int tx1_int_pa = test_bit(CAPABILITY_INTERNAL_PA_TX1,
-+ int tx1_ext_pa = test_bit(CAPABILITY_EXTERNAL_PA_TX1,
- &rt2x00dev->cap_flags);
- u8 rfcsr;
-
-@@ -7056,9 +7056,9 @@ static void rt2800_init_rfcsr_3352(struc
- rt2800_rfcsr_write(rt2x00dev, 32, 0x80);
- rt2800_rfcsr_write(rt2x00dev, 33, 0x00);
- rfcsr = 0x01;
-- if (!tx0_int_pa)
-+ if (tx0_ext_pa)
- rt2x00_set_field8(&rfcsr, RFCSR34_TX0_EXT_PA, 1);
-- if (!tx1_int_pa)
-+ if (tx1_ext_pa)
- rt2x00_set_field8(&rfcsr, RFCSR34_TX1_EXT_PA, 1);
- rt2800_rfcsr_write(rt2x00dev, 34, rfcsr);
- rt2800_rfcsr_write(rt2x00dev, 35, 0x03);
-@@ -7068,13 +7068,13 @@ static void rt2800_init_rfcsr_3352(struc
- rt2800_rfcsr_write(rt2x00dev, 39, 0xc5);
- rt2800_rfcsr_write(rt2x00dev, 40, 0x33);
- rfcsr = 0x52;
-- if (tx0_int_pa) {
-+ if (!tx0_ext_pa) {
- rt2x00_set_field8(&rfcsr, RFCSR41_BIT1, 1);
- rt2x00_set_field8(&rfcsr, RFCSR41_BIT4, 1);
- }
- rt2800_rfcsr_write(rt2x00dev, 41, rfcsr);
- rfcsr = 0x52;
-- if (tx1_int_pa) {
-+ if (!tx1_ext_pa) {
- rt2x00_set_field8(&rfcsr, RFCSR42_BIT1, 1);
- rt2x00_set_field8(&rfcsr, RFCSR42_BIT4, 1);
- }
-@@ -7087,19 +7087,19 @@ static void rt2800_init_rfcsr_3352(struc
- rt2800_rfcsr_write(rt2x00dev, 48, 0x14);
- rt2800_rfcsr_write(rt2x00dev, 49, 0x00);
- rfcsr = 0x2d;
-- if (!tx0_int_pa)
-+ if (tx0_ext_pa)
- rt2x00_set_field8(&rfcsr, RFCSR50_TX0_EXT_PA, 1);
-- if (!tx1_int_pa)
-+ if (tx1_ext_pa)
- rt2x00_set_field8(&rfcsr, RFCSR50_TX1_EXT_PA, 1);
- rt2800_rfcsr_write(rt2x00dev, 50, rfcsr);
-- rt2800_rfcsr_write(rt2x00dev, 51, (tx0_int_pa ? 0x7f : 0x52));
-- rt2800_rfcsr_write(rt2x00dev, 52, (tx0_int_pa ? 0x00 : 0xc0));
-- rt2800_rfcsr_write(rt2x00dev, 53, (tx0_int_pa ? 0x52 : 0xd2));
-- rt2800_rfcsr_write(rt2x00dev, 54, (tx0_int_pa ? 0x1b : 0xc0));
-- rt2800_rfcsr_write(rt2x00dev, 55, (tx1_int_pa ? 0x7f : 0x52));
-- rt2800_rfcsr_write(rt2x00dev, 56, (tx1_int_pa ? 0x00 : 0xc0));
-- rt2800_rfcsr_write(rt2x00dev, 57, (tx0_int_pa ? 0x52 : 0x49));
-- rt2800_rfcsr_write(rt2x00dev, 58, (tx1_int_pa ? 0x1b : 0xc0));
-+ rt2800_rfcsr_write(rt2x00dev, 51, (tx0_ext_pa ? 0x52 : 0x7f));
-+ rt2800_rfcsr_write(rt2x00dev, 52, (tx0_ext_pa ? 0xc0 : 0x00));
-+ rt2800_rfcsr_write(rt2x00dev, 53, (tx0_ext_pa ? 0xd2 : 0x52));
-+ rt2800_rfcsr_write(rt2x00dev, 54, (tx0_ext_pa ? 0xc0 : 0x1b));
-+ rt2800_rfcsr_write(rt2x00dev, 55, (tx1_ext_pa ? 0x52 : 0x7f));
-+ rt2800_rfcsr_write(rt2x00dev, 56, (tx1_ext_pa ? 0xc0 : 0x00));
-+ rt2800_rfcsr_write(rt2x00dev, 57, (tx0_ext_pa ? 0x49 : 0x52));
-+ rt2800_rfcsr_write(rt2x00dev, 58, (tx1_ext_pa ? 0xc0 : 0x1b));
- rt2800_rfcsr_write(rt2x00dev, 59, 0x00);
- rt2800_rfcsr_write(rt2x00dev, 60, 0x00);
- rt2800_rfcsr_write(rt2x00dev, 61, 0x00);
-@@ -8782,13 +8782,13 @@ static int rt2800_init_eeprom(struct rt2
- rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1, &eeprom);
-
- if (rt2x00_rt(rt2x00dev, RT3352)) {
-- if (!rt2x00_get_field16(eeprom,
-+ if (rt2x00_get_field16(eeprom,
- EEPROM_NIC_CONF1_EXTERNAL_TX0_PA_3352))
-- __set_bit(CAPABILITY_INTERNAL_PA_TX0,
-+ __set_bit(CAPABILITY_EXTERNAL_PA_TX0,
- &rt2x00dev->cap_flags);
-- if (!rt2x00_get_field16(eeprom,
-+ if (rt2x00_get_field16(eeprom,
- EEPROM_NIC_CONF1_EXTERNAL_TX1_PA_3352))
-- __set_bit(CAPABILITY_INTERNAL_PA_TX1,
-+ __set_bit(CAPABILITY_EXTERNAL_PA_TX1,
- &rt2x00dev->cap_flags);
- }
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
-@@ -719,8 +719,8 @@ enum rt2x00_capability_flags {
- CAPABILITY_DOUBLE_ANTENNA,
- CAPABILITY_BT_COEXIST,
- CAPABILITY_VCO_RECALIBRATION,
-- CAPABILITY_INTERNAL_PA_TX0,
-- CAPABILITY_INTERNAL_PA_TX1,
-+ CAPABILITY_EXTERNAL_PA_TX0,
-+ CAPABILITY_EXTERNAL_PA_TX1,
- };
-
- /*
diff --git a/package/kernel/mac80211/patches/020-21-rt2800-fix-LNA-gain-assignment-for-MT7620.patch b/package/kernel/mac80211/patches/020-21-rt2800-fix-LNA-gain-assignment-for-MT7620.patch
deleted file mode 100644
index 71a4ffea45..0000000000
--- a/package/kernel/mac80211/patches/020-21-rt2800-fix-LNA-gain-assignment-for-MT7620.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From 0109238d62a99ea779a7e28e21868118e7b8d69d Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel at makrotopia.org>
-Date: Mon, 10 Apr 2017 14:28:14 +0200
-Subject: [PATCH 1/2] rt2800: fix LNA gain assignment for MT7620
-To: Stanislaw Gruszka <sgruszka at redhat.com>
-Cc: Helmut Schaa <helmut.schaa at googlemail.com>,
- linux-wireless at vger.kernel.org,
- Kalle Valo <kvalo at codeaurora.org>
-
-The base value used for MT7620 differs from Rt5392 which resulted in
-quite bad RX signal quality. Fix this by using the correct base value as
-well as the LNA calibration values for HT20.
-
-Reported-by: Tom Psyborg <pozega.tomislav at gmail.com>
-Signed-off-by: Daniel Golle <daniel at makrotopia.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 18 ++++++++++++++++--
- 1 file changed, 16 insertions(+), 2 deletions(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -3806,11 +3806,25 @@ static void rt2800_config_channel(struct
- }
-
- if (rt2x00_rt(rt2x00dev, RT5592) || rt2x00_rt(rt2x00dev, RT6352)) {
-+ reg = 0x10;
-+ if (!conf_is_ht40(conf)) {
-+ if (rt2x00_rt(rt2x00dev, RT6352) &&
-+ rt2x00_has_cap_external_lna_bg(rt2x00dev)) {
-+ reg |= 0x5;
-+ } else {
-+ reg |= 0xa;
-+ }
-+ }
- rt2800_bbp_write(rt2x00dev, 195, 141);
-- rt2800_bbp_write(rt2x00dev, 196, conf_is_ht40(conf) ? 0x10 : 0x1a);
-+ rt2800_bbp_write(rt2x00dev, 196, reg);
-
- /* AGC init */
-- reg = (rf->channel <= 14 ? 0x1c : 0x24) + 2 * rt2x00dev->lna_gain;
-+ if (rt2x00_rt(rt2x00dev, RT6352))
-+ reg = 0x04;
-+ else
-+ reg = rf->channel <= 14 ? 0x1c : 0x24;
-+
-+ reg += 2 * rt2x00dev->lna_gain;
- rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, reg);
-
- rt2800_iq_calibrate(rt2x00dev, rf->channel);
diff --git a/package/kernel/mac80211/patches/020-22-rt2800-do-VCO-calibration-after-programming-ALC.patch b/package/kernel/mac80211/patches/020-22-rt2800-do-VCO-calibration-after-programming-ALC.patch
deleted file mode 100644
index 3d76408cd2..0000000000
--- a/package/kernel/mac80211/patches/020-22-rt2800-do-VCO-calibration-after-programming-ALC.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From feb608c7986c14bab153f31f8e96f251072e6578 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel at makrotopia.org>
-Date: Mon, 10 Apr 2017 15:33:20 +0200
-Subject: [PATCH 2/2] rt2800: do VCO calibration after programming ALC
-To: Stanislaw Gruszka <sgruszka at redhat.com>
-Cc: Helmut Schaa <helmut.schaa at googlemail.com>,
- linux-wireless at vger.kernel.org,
- Kalle Valo <kvalo at codeaurora.org>
-
-Scanning fails if we don't do VCO calibration every time.
-The vendor driver duplicates the VCO calibration function into the
-channel switching logic, we can do the same with less duplication.
-
-Signed-off-by: Daniel Golle <daniel at makrotopia.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -3407,6 +3407,8 @@ static void rt2800_config_alc(struct rt2
- rt2800_rfcsr_write(rt2x00dev, 42, 0x5b);
- }
- rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, mac_sys_ctrl);
-+
-+ rt2800_vco_calibration(rt2x00dev);
- }
-
- static void rt2800_bbp_write_with_rx_chain(struct rt2x00_dev *rt2x00dev,
diff --git a/package/kernel/mac80211/patches/020-23-rt2800-fix-mt7620-vco-calibration-registers.patch b/package/kernel/mac80211/patches/020-23-rt2800-fix-mt7620-vco-calibration-registers.patch
deleted file mode 100644
index 360d06e8f8..0000000000
--- a/package/kernel/mac80211/patches/020-23-rt2800-fix-mt7620-vco-calibration-registers.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From 02c452f317b4a4d06c433c294e66896a389731c1 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel at makrotopia.org>
-Date: Tue, 18 Apr 2017 11:09:53 +0200
-Subject: [PATCH] rt2800: fix mt7620 vco calibration registers
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-To: Stanislaw Gruszka <sgruszka at redhat.com>
-Cc: Helmut Schaa <helmut.schaa at googlemail.com>,
- linux-wireless at vger.kernel.org,
- Kalle Valo <kvalo at codeaurora.org>,
- Tom Psyborg <pozega.tomislav at gmail.com>
-
-Use register values from init LNA function instead of the ones from
-restore LNA function. Apply register values based on rx path
-configuration.
-
-Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
-Signed-off-by: Daniel Golle <daniel at makrotopia.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -4932,7 +4932,7 @@ void rt2800_vco_calibration(struct rt2x0
- rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);
-
- if (rt2x00_rt(rt2x00dev, RT6352)) {
-- if (rt2x00dev->default_ant.tx_chain_num == 1) {
-+ if (rt2x00dev->default_ant.rx_chain_num == 1) {
- rt2800_bbp_write(rt2x00dev, 91, 0x07);
- rt2800_bbp_write(rt2x00dev, 95, 0x1A);
- rt2800_bbp_write(rt2x00dev, 195, 128);
-@@ -4953,8 +4953,8 @@ void rt2800_vco_calibration(struct rt2x0
- }
-
- if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) {
-- rt2800_bbp_write(rt2x00dev, 75, 0x60);
-- rt2800_bbp_write(rt2x00dev, 76, 0x44);
-+ rt2800_bbp_write(rt2x00dev, 75, 0x68);
-+ rt2800_bbp_write(rt2x00dev, 76, 0x4C);
- rt2800_bbp_write(rt2x00dev, 79, 0x1C);
- rt2800_bbp_write(rt2x00dev, 80, 0x0C);
- rt2800_bbp_write(rt2x00dev, 82, 0xB6);
diff --git a/package/kernel/mac80211/patches/020-24-rt2800-fix-mt7620-E2-channel-registers.patch b/package/kernel/mac80211/patches/020-24-rt2800-fix-mt7620-E2-channel-registers.patch
deleted file mode 100644
index 92c2134845..0000000000
--- a/package/kernel/mac80211/patches/020-24-rt2800-fix-mt7620-E2-channel-registers.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From c426cb0ed15ee12dfdc8c53ddd1449ac617023cf Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel at makrotopia.org>
-Date: Tue, 18 Apr 2017 11:45:37 +0200
-Subject: [PATCH] rt2800: fix mt7620 E2 channel registers
-To: Stanislaw Gruszka <sgruszka at redhat.com>
-Cc: Helmut Schaa <helmut.schaa at googlemail.com>,
- linux-wireless at vger.kernel.org,
- Kalle Valo <kvalo at codeaurora.org>,
- Tom Psyborg <pozega.tomislav at gmail.com>
-
-From: Tomislav Požega <pozega.tomislav at gmail.com>
-
-update RF register 47 and 54 values according to vendor driver
-
-Signed-off-by: Tomislav Požega <pozega.tomislav at gmail.com>
-Signed-off-by: Daniel Golle <daniel at makrotopia.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 6 ++++--
- 1 file changed, 4 insertions(+), 2 deletions(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -8145,9 +8145,11 @@ static void rt2800_init_rfcsr_6352(struc
- rt2800_rfcsr_write_chanreg(rt2x00dev, 44, 0xB3);
- rt2800_rfcsr_write_chanreg(rt2x00dev, 45, 0xD5);
- rt2800_rfcsr_write_chanreg(rt2x00dev, 46, 0x27);
-- rt2800_rfcsr_write_chanreg(rt2x00dev, 47, 0x69);
-+ rt2800_rfcsr_write_bank(rt2x00dev, 4, 47, 0x67);
-+ rt2800_rfcsr_write_bank(rt2x00dev, 6, 47, 0x69);
- rt2800_rfcsr_write_chanreg(rt2x00dev, 48, 0xFF);
-- rt2800_rfcsr_write_chanreg(rt2x00dev, 54, 0x20);
-+ rt2800_rfcsr_write_bank(rt2x00dev, 4, 54, 0x27);
-+ rt2800_rfcsr_write_bank(rt2x00dev, 6, 54, 0x20);
- rt2800_rfcsr_write_chanreg(rt2x00dev, 55, 0x66);
- rt2800_rfcsr_write_chanreg(rt2x00dev, 56, 0xFF);
- rt2800_rfcsr_write_chanreg(rt2x00dev, 57, 0x1C);
diff --git a/package/kernel/mac80211/patches/060-no_local_ssb_bcma.patch b/package/kernel/mac80211/patches/060-no_local_ssb_bcma.patch
index 527938f015..1fc52f9ab0 100644
--- a/package/kernel/mac80211/patches/060-no_local_ssb_bcma.patch
+++ b/package/kernel/mac80211/patches/060-no_local_ssb_bcma.patch
@@ -1,6 +1,6 @@
---- a/.local-symbols
-+++ b/.local-symbols
-@@ -482,45 +482,6 @@ USB_IPHETH=
+--- a/local-symbols
++++ b/local-symbols
+@@ -383,45 +383,6 @@ USB_IPHETH=
USB_SIERRA_NET=
USB_VL600=
USB_NET_CH9200=
@@ -48,7 +48,7 @@
NFC_NCI=
--- a/drivers/net/wireless/broadcom/b43/main.c
+++ b/drivers/net/wireless/broadcom/b43/main.c
-@@ -2866,7 +2866,7 @@ static struct ssb_device *b43_ssb_gpio_d
+@@ -2876,7 +2876,7 @@ static struct ssb_device *b43_ssb_gpio_d
{
struct ssb_bus *bus = dev->dev->sdev->bus;
@@ -57,7 +57,7 @@
return (bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev);
#else
return bus->chipco.dev;
-@@ -4883,7 +4883,7 @@ static int b43_wireless_core_init(struct
+@@ -4893,7 +4893,7 @@ static int b43_wireless_core_init(struct
}
if (sprom->boardflags_lo & B43_BFL_XTAL_NOSLOW)
hf |= B43_HF_DSCRQ; /* Disable slowclock requests from ucode. */
@@ -110,7 +110,7 @@
--- a/Kconfig.sources
+++ b/Kconfig.sources
@@ -9,9 +9,6 @@ source "$BACKPORT_DIR/drivers/net/wirele
- source "$BACKPORT_DIR/drivers/net/ethernet/Kconfig"
+ #source "$BACKPORT_DIR/drivers/net/ethernet/Kconfig"
source "$BACKPORT_DIR/drivers/net/usb/Kconfig"
-source "$BACKPORT_DIR/drivers/ssb/Kconfig"
@@ -118,15 +118,15 @@
-
source "$BACKPORT_DIR/net/nfc/Kconfig"
- source "$BACKPORT_DIR/drivers/media/Kconfig"
+ #source "$BACKPORT_DIR/drivers/media/Kconfig"
--- a/Makefile.kernel
+++ b/Makefile.kernel
-@@ -38,8 +38,6 @@ obj-$(CPTCFG_MAC80211) += net/mac80211/
+@@ -39,8 +39,6 @@ obj-$(CPTCFG_MAC80211) += net/mac80211/
obj-$(CPTCFG_WLAN) += drivers/net/wireless/
- obj-$(CPTCFG_BT) += net/bluetooth/
- obj-$(CPTCFG_BT) += drivers/bluetooth/
+ #obj-$(CPTCFG_BT) += net/bluetooth/
+ #obj-$(CPTCFG_BT) += drivers/bluetooth/
-obj-$(CPTCFG_SSB) += drivers/ssb/
-obj-$(CPTCFG_BCMA) += drivers/bcma/
- obj-$(CPTCFG_ETHERNET) += drivers/net/ethernet/
+ #obj-$(CPTCFG_ETHERNET) += drivers/net/ethernet/
obj-$(CPTCFG_USB_NET_RNDIS_WLAN) += drivers/net/usb/
obj-$(CPTCFG_NFC) += net/nfc/
diff --git a/package/kernel/mac80211/patches/080-ath10k_thermal_config.patch b/package/kernel/mac80211/patches/080-ath10k_thermal_config.patch
index e08fa32a3b..796615b03c 100644
--- a/package/kernel/mac80211/patches/080-ath10k_thermal_config.patch
+++ b/package/kernel/mac80211/patches/080-ath10k_thermal_config.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ath/ath10k/Kconfig
+++ b/drivers/net/wireless/ath/ath10k/Kconfig
-@@ -48,6 +48,12 @@ config ATH10K_TRACING
+@@ -65,6 +65,12 @@ config ATH10K_TRACING
---help---
Select this to ath10k use tracing infrastructure.
diff --git a/package/kernel/mac80211/patches/090-remove-cred.patch b/package/kernel/mac80211/patches/090-remove-cred.patch
deleted file mode 100644
index 3adb2afb86..0000000000
--- a/package/kernel/mac80211/patches/090-remove-cred.patch
+++ /dev/null
@@ -1,15 +0,0 @@
-This is only needed for kernel < 2.6.29 and conflicts with kernel 4.4.42
-
---- a/backport-include/linux/cred.h
-+++ /dev/null
-@@ -1,10 +0,0 @@
--#ifndef __BACKPORT_LINUX_CRED_H
--#define __BACKPORT_LINUX_CRED_H
--#include_next <linux/cred.h>
--#include <linux/version.h>
--
--#ifndef current_user_ns
--#define current_user_ns() (current->nsproxy->user_ns)
--#endif
--
--#endif /* __BACKPORT_LINUX_CRED_H */
diff --git a/package/kernel/mac80211/patches/100-remove-cryptoapi-dependencies.patch b/package/kernel/mac80211/patches/100-remove-cryptoapi-dependencies.patch
index 95fea441a4..263be3e209 100644
--- a/package/kernel/mac80211/patches/100-remove-cryptoapi-dependencies.patch
+++ b/package/kernel/mac80211/patches/100-remove-cryptoapi-dependencies.patch
@@ -6,9 +6,9 @@
depends on CRYPTO_AES
- select BPAUTO_CRYPTO_CCM
- depends on CRYPTO_GCM
+ depends on CRYPTO_CMAC
depends on CRC32
---help---
- This option enables the hardware independent IEEE 802.11
--- a/net/mac80211/Makefile
+++ b/net/mac80211/Makefile
@@ -16,9 +16,7 @@ mac80211-y := \
@@ -275,7 +275,7 @@
struct {
--- a/net/mac80211/wpa.c
+++ b/net/mac80211/wpa.c
-@@ -305,7 +305,8 @@ ieee80211_crypto_tkip_decrypt(struct iee
+@@ -306,7 +306,8 @@ ieee80211_crypto_tkip_decrypt(struct iee
}
@@ -285,7 +285,7 @@
{
__le16 mask_fc;
int a4_included, mgmt;
-@@ -335,14 +336,8 @@ static void ccmp_special_blocks(struct s
+@@ -336,14 +337,8 @@ static void ccmp_special_blocks(struct s
else
qos_tid = 0;
@@ -302,7 +302,7 @@
/* Nonce: Nonce Flags | A2 | PN
* Nonce Flags: Priority (b0..b3) | Management (b4) | Reserved (b5..b7)
-@@ -350,6 +345,8 @@ static void ccmp_special_blocks(struct s
+@@ -351,6 +346,8 @@ static void ccmp_special_blocks(struct s
b_0[1] = qos_tid | (mgmt << 4);
memcpy(&b_0[2], hdr->addr2, ETH_ALEN);
memcpy(&b_0[8], pn, IEEE80211_CCMP_PN_LEN);
@@ -311,7 +311,7 @@
/* AAD (extra authenticate-only data) / masked 802.11 header
* FC | A1 | A2 | A3 | SC | [A4] | [QC] */
-@@ -406,7 +403,7 @@ static int ccmp_encrypt_skb(struct ieee8
+@@ -407,7 +404,7 @@ static int ccmp_encrypt_skb(struct ieee8
u8 *pos;
u8 pn[6];
u64 pn64;
@@ -320,7 +320,7 @@
u8 b_0[AES_BLOCK_SIZE];
if (info->control.hw_key &&
-@@ -461,9 +458,11 @@ static int ccmp_encrypt_skb(struct ieee8
+@@ -462,9 +459,11 @@ static int ccmp_encrypt_skb(struct ieee8
return 0;
pos += IEEE80211_CCMP_HDR_LEN;
@@ -335,7 +335,7 @@
}
-@@ -536,7 +535,7 @@ ieee80211_crypto_ccmp_decrypt(struct iee
+@@ -537,7 +536,7 @@ ieee80211_crypto_ccmp_decrypt(struct iee
u8 aad[2 * AES_BLOCK_SIZE];
u8 b_0[AES_BLOCK_SIZE];
/* hardware didn't decrypt/verify MIC */
@@ -344,7 +344,7 @@
if (ieee80211_aes_ccm_decrypt(
key->u.ccmp.tfm, b_0, aad,
-@@ -638,7 +637,7 @@ static int gcmp_encrypt_skb(struct ieee8
+@@ -639,7 +638,7 @@ static int gcmp_encrypt_skb(struct ieee8
u8 *pos;
u8 pn[6];
u64 pn64;
@@ -353,7 +353,7 @@
u8 j_0[AES_BLOCK_SIZE];
if (info->control.hw_key &&
-@@ -695,8 +694,10 @@ static int gcmp_encrypt_skb(struct ieee8
+@@ -696,8 +695,10 @@ static int gcmp_encrypt_skb(struct ieee8
pos += IEEE80211_GCMP_HDR_LEN;
gcmp_special_blocks(skb, pn, j_0, aad);
@@ -366,7 +366,7 @@
}
ieee80211_tx_result
-@@ -1120,9 +1121,9 @@ ieee80211_crypto_aes_gmac_encrypt(struct
+@@ -1121,9 +1122,9 @@ ieee80211_crypto_aes_gmac_encrypt(struct
struct ieee80211_key *key = tx->key;
struct ieee80211_mmie_16 *mmie;
struct ieee80211_hdr *hdr;
@@ -378,7 +378,7 @@
if (WARN_ON(skb_queue_len(&tx->skbs) != 1))
return TX_DROP;
-@@ -1168,7 +1169,7 @@ ieee80211_crypto_aes_gmac_decrypt(struct
+@@ -1169,7 +1170,7 @@ ieee80211_crypto_aes_gmac_decrypt(struct
struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
struct ieee80211_key *key = rx->key;
struct ieee80211_mmie_16 *mmie;
diff --git a/package/kernel/mac80211/patches/110-mac80211_keep_keys_on_stop_ap.patch b/package/kernel/mac80211/patches/110-mac80211_keep_keys_on_stop_ap.patch
index ff619129d9..005e3e5d5d 100644
--- a/package/kernel/mac80211/patches/110-mac80211_keep_keys_on_stop_ap.patch
+++ b/package/kernel/mac80211/patches/110-mac80211_keep_keys_on_stop_ap.patch
@@ -2,7 +2,7 @@ Used for AP+STA support in OpenWrt - preserve AP mode keys across STA reconnects
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
-@@ -1014,7 +1014,6 @@ static int ieee80211_stop_ap(struct wiph
+@@ -1056,7 +1056,6 @@ static int ieee80211_stop_ap(struct wiph
sdata->u.ap.driver_smps_mode = IEEE80211_SMPS_OFF;
__sta_info_flush(sdata, true);
diff --git a/package/kernel/mac80211/patches/130-mac80211-hwsim-hrtimer-clock.patch b/package/kernel/mac80211/patches/130-mac80211-hwsim-hrtimer-clock.patch
deleted file mode 100644
index 828ed83cb7..0000000000
--- a/package/kernel/mac80211/patches/130-mac80211-hwsim-hrtimer-clock.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/drivers/net/wireless/mac80211_hwsim.c
-+++ b/drivers/net/wireless/mac80211_hwsim.c
-@@ -2678,7 +2678,7 @@ static int mac80211_hwsim_new_radio(stru
-
- tasklet_hrtimer_init(&data->beacon_timer,
- mac80211_hwsim_beacon,
-- CLOCK_MONOTONIC_RAW, HRTIMER_MODE_ABS);
-+ CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
-
- spin_lock_bh(&hwsim_radio_lock);
- list_add_tail(&data->list, &hwsim_radios);
diff --git a/package/kernel/mac80211/patches/150-disable_addr_notifier.patch b/package/kernel/mac80211/patches/150-disable_addr_notifier.patch
index ca1e53f8df..42a692a1fc 100644
--- a/package/kernel/mac80211/patches/150-disable_addr_notifier.patch
+++ b/package/kernel/mac80211/patches/150-disable_addr_notifier.patch
@@ -1,6 +1,6 @@
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
-@@ -291,7 +291,7 @@ void ieee80211_restart_hw(struct ieee802
+@@ -292,7 +292,7 @@ void ieee80211_restart_hw(struct ieee802
}
EXPORT_SYMBOL(ieee80211_restart_hw);
@@ -9,7 +9,7 @@
static int ieee80211_ifa_changed(struct notifier_block *nb,
unsigned long data, void *arg)
{
-@@ -350,7 +350,7 @@ static int ieee80211_ifa_changed(struct
+@@ -351,7 +351,7 @@ static int ieee80211_ifa_changed(struct
}
#endif
@@ -18,7 +18,7 @@
static int ieee80211_ifa6_changed(struct notifier_block *nb,
unsigned long data, void *arg)
{
-@@ -1111,14 +1111,14 @@ int ieee80211_register_hw(struct ieee802
+@@ -1115,14 +1115,14 @@ int ieee80211_register_hw(struct ieee802
if (result)
goto fail_flows;
@@ -35,7 +35,7 @@
local->ifa6_notifier.notifier_call = ieee80211_ifa6_changed;
result = register_inet6addr_notifier(&local->ifa6_notifier);
if (result)
-@@ -1127,13 +1127,13 @@ int ieee80211_register_hw(struct ieee802
+@@ -1131,13 +1131,13 @@ int ieee80211_register_hw(struct ieee802
return 0;
@@ -52,7 +52,7 @@
fail_ifa:
#endif
ieee80211_txq_teardown_flows(local);
-@@ -1163,10 +1163,10 @@ void ieee80211_unregister_hw(struct ieee
+@@ -1167,10 +1167,10 @@ void ieee80211_unregister_hw(struct ieee
tasklet_kill(&local->tx_pending_tasklet);
tasklet_kill(&local->tasklet);
diff --git a/package/kernel/mac80211/patches/210-ap_scan.patch b/package/kernel/mac80211/patches/210-ap_scan.patch
index 3b613bba0e..e9999e32b9 100644
--- a/package/kernel/mac80211/patches/210-ap_scan.patch
+++ b/package/kernel/mac80211/patches/210-ap_scan.patch
@@ -1,6 +1,6 @@
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
-@@ -2165,7 +2165,7 @@ static int ieee80211_scan(struct wiphy *
+@@ -2212,7 +2212,7 @@ static int ieee80211_scan(struct wiphy *
* the frames sent while scanning on other channel will be
* lost)
*/
diff --git a/package/kernel/mac80211/patches/304-ath9k-force-rx_clear-when-disabling-rx.patch b/package/kernel/mac80211/patches/304-ath9k-force-rx_clear-when-disabling-rx.patch
index eb6862db6d..8aaccf49b4 100644
--- a/package/kernel/mac80211/patches/304-ath9k-force-rx_clear-when-disabling-rx.patch
+++ b/package/kernel/mac80211/patches/304-ath9k-force-rx_clear-when-disabling-rx.patch
@@ -12,7 +12,7 @@ Signed-off-by: Helmut Schaa <helmut.schaa at googlemail.com>
--- a/drivers/net/wireless/ath/ath9k/mac.c
+++ b/drivers/net/wireless/ath/ath9k/mac.c
-@@ -677,13 +677,18 @@ void ath9k_hw_startpcureceive(struct ath
+@@ -678,13 +678,18 @@ void ath9k_hw_startpcureceive(struct ath
ath9k_ani_reset(ah, is_scanning);
diff --git a/package/kernel/mac80211/patches/305-ath9k-limit-retries-for-powersave-response-frames.patch b/package/kernel/mac80211/patches/305-ath9k-limit-retries-for-powersave-response-frames.patch
index 5923594be3..31825b819c 100644
--- a/package/kernel/mac80211/patches/305-ath9k-limit-retries-for-powersave-response-frames.patch
+++ b/package/kernel/mac80211/patches/305-ath9k-limit-retries-for-powersave-response-frames.patch
@@ -40,7 +40,7 @@ Signed-off-by: Felix Fietkau <nbd at openwrt.org>
}
static void ath_txq_skb_done(struct ath_softc *sc, struct ath_txq *txq,
-@@ -1522,7 +1537,7 @@ ath_tx_form_burst(struct ath_softc *sc,
+@@ -1502,7 +1517,7 @@ ath_tx_form_burst(struct ath_softc *sc,
break;
}
@@ -49,7 +49,7 @@ Signed-off-by: Felix Fietkau <nbd at openwrt.org>
} while (1);
}
-@@ -1552,7 +1567,7 @@ static bool ath_tx_sched_aggr(struct ath
+@@ -1532,7 +1547,7 @@ static bool ath_tx_sched_aggr(struct ath
return false;
}
@@ -58,7 +58,7 @@ Signed-off-by: Felix Fietkau <nbd at openwrt.org>
if (aggr)
aggr_len = ath_tx_form_aggr(sc, txq, tid, &bf_q, bf);
else
-@@ -1710,7 +1725,7 @@ void ath9k_release_buffered_frames(struc
+@@ -1690,7 +1705,7 @@ void ath9k_release_buffered_frames(struc
break;
list_add_tail(&bf->list, &bf_q);
@@ -67,7 +67,7 @@ Signed-off-by: Felix Fietkau <nbd at openwrt.org>
if (bf_isampdu(bf)) {
ath_tx_addto_baw(sc, tid, bf);
bf->bf_state.bf_type &= ~BUF_AGGR;
-@@ -2410,7 +2425,7 @@ int ath_tx_start(struct ieee80211_hw *hw
+@@ -2390,7 +2405,7 @@ int ath_tx_start(struct ieee80211_hw *hw
if (txctl->paprd)
bf->bf_state.bfs_paprd_timestamp = jiffies;
@@ -76,7 +76,7 @@ Signed-off-by: Felix Fietkau <nbd at openwrt.org>
ath_tx_send_normal(sc, txq, tid, skb);
out:
-@@ -2449,7 +2464,7 @@ void ath_tx_cabq(struct ieee80211_hw *hw
+@@ -2429,7 +2444,7 @@ void ath_tx_cabq(struct ieee80211_hw *hw
break;
bf->bf_lastbf = bf;
@@ -85,7 +85,7 @@ Signed-off-by: Felix Fietkau <nbd at openwrt.org>
ath_buf_set_rate(sc, bf, &info, fi->framelen, false);
duration += info.rates[0].PktDuration;
if (bf_tail)
-@@ -2968,7 +2983,7 @@ int ath9k_tx99_send(struct ath_softc *sc
+@@ -2946,7 +2961,7 @@ int ath9k_tx99_send(struct ath_softc *sc
return -EINVAL;
}
diff --git a/package/kernel/mac80211/patches/306-Revert-ath9k-interpret-requested-txpower-in-EIRP-dom.patch b/package/kernel/mac80211/patches/306-Revert-ath9k-interpret-requested-txpower-in-EIRP-dom.patch
index 956ab83903..35d07430eb 100644
--- a/package/kernel/mac80211/patches/306-Revert-ath9k-interpret-requested-txpower-in-EIRP-dom.patch
+++ b/package/kernel/mac80211/patches/306-Revert-ath9k-interpret-requested-txpower-in-EIRP-dom.patch
@@ -8,7 +8,7 @@ This reverts commit 71f5137bf010c6faffab50c0ec15374c59c4a411.
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
-@@ -2931,7 +2931,8 @@ void ath9k_hw_apply_txpower(struct ath_h
+@@ -2935,7 +2935,8 @@ void ath9k_hw_apply_txpower(struct ath_h
{
struct ath_regulatory *reg = ath9k_hw_regulatory(ah);
struct ieee80211_channel *channel;
@@ -18,7 +18,7 @@ This reverts commit 71f5137bf010c6faffab50c0ec15374c59c4a411.
if (!chan)
return;
-@@ -2939,10 +2940,15 @@ void ath9k_hw_apply_txpower(struct ath_h
+@@ -2943,10 +2944,15 @@ void ath9k_hw_apply_txpower(struct ath_h
channel = chan->chan;
chan_pwr = min_t(int, channel->max_power * 2, MAX_RATE_POWER);
new_pwr = min_t(int, chan_pwr, reg->power_limit);
diff --git a/package/kernel/mac80211/patches/307-mac80211-add-hdrlen-to-ieee80211_tx_data.patch b/package/kernel/mac80211/patches/307-mac80211-add-hdrlen-to-ieee80211_tx_data.patch
index 1a6fd8471c..baaca173c7 100644
--- a/package/kernel/mac80211/patches/307-mac80211-add-hdrlen-to-ieee80211_tx_data.patch
+++ b/package/kernel/mac80211/patches/307-mac80211-add-hdrlen-to-ieee80211_tx_data.patch
@@ -21,7 +21,7 @@ Signed-off-by: Janusz Dziedzic <janusz.dziedzic at tieto.com>
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
-@@ -925,7 +925,7 @@ ieee80211_tx_h_fragment(struct ieee80211
+@@ -921,7 +921,7 @@ ieee80211_tx_h_fragment(struct ieee80211
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct ieee80211_hdr *hdr = (void *)skb->data;
int frag_threshold = tx->local->hw.wiphy->frag_threshold;
@@ -30,7 +30,7 @@ Signed-off-by: Janusz Dziedzic <janusz.dziedzic at tieto.com>
int fragnum;
/* no matter what happens, tx->skb moves to tx->skbs */
-@@ -946,8 +946,6 @@ ieee80211_tx_h_fragment(struct ieee80211
+@@ -942,8 +942,6 @@ ieee80211_tx_h_fragment(struct ieee80211
if (WARN_ON(info->flags & IEEE80211_TX_CTL_AMPDU))
return TX_DROP;
@@ -39,7 +39,7 @@ Signed-off-by: Janusz Dziedzic <janusz.dziedzic at tieto.com>
/* internal error, why isn't DONTFRAG set? */
if (WARN_ON(skb->len + FCS_LEN <= frag_threshold))
return TX_DROP;
-@@ -1179,6 +1177,8 @@ ieee80211_tx_prepare(struct ieee80211_su
+@@ -1175,6 +1173,8 @@ ieee80211_tx_prepare(struct ieee80211_su
hdr = (struct ieee80211_hdr *) skb->data;
@@ -48,7 +48,7 @@ Signed-off-by: Janusz Dziedzic <janusz.dziedzic at tieto.com>
if (likely(sta)) {
if (!IS_ERR(sta))
tx->sta = sta;
-@@ -3437,6 +3437,7 @@ begin:
+@@ -3434,6 +3434,7 @@ begin:
tx.local = local;
tx.skb = skb;
tx.sdata = vif_to_sdata(info->control.vif);
@@ -56,7 +56,7 @@ Signed-off-by: Janusz Dziedzic <janusz.dziedzic at tieto.com>
if (txq->sta)
tx.sta = container_of(txq->sta, struct sta_info, sta);
-@@ -3731,6 +3732,7 @@ ieee80211_build_data_template(struct iee
+@@ -3756,6 +3757,7 @@ ieee80211_build_data_template(struct iee
hdr = (void *)skb->data;
tx.sta = sta_info_get(sdata, hdr->addr1);
tx.skb = skb;
@@ -66,7 +66,7 @@ Signed-off-by: Janusz Dziedzic <janusz.dziedzic at tieto.com>
rcu_read_unlock();
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
-@@ -1227,6 +1227,7 @@ void ieee80211_send_auth(struct ieee8021
+@@ -1232,6 +1232,7 @@ void ieee80211_send_auth(struct ieee8021
struct ieee80211_local *local = sdata->local;
struct sk_buff *skb;
struct ieee80211_mgmt *mgmt;
@@ -74,8 +74,8 @@ Signed-off-by: Janusz Dziedzic <janusz.dziedzic at tieto.com>
int err;
/* 24 + 6 = header + auth_algo + auth_transaction + status_code */
-@@ -1251,8 +1252,10 @@ void ieee80211_send_auth(struct ieee8021
- memcpy(skb_put(skb, extra_len), extra, extra_len);
+@@ -1255,8 +1256,10 @@ void ieee80211_send_auth(struct ieee8021
+ skb_put_data(skb, extra, extra_len);
if (auth_alg == WLAN_AUTH_SHARED_KEY && transaction == 3) {
+ hdrlen = ieee80211_hdrlen(mgmt->frame_control);
@@ -155,7 +155,7 @@ Signed-off-by: Janusz Dziedzic <janusz.dziedzic at tieto.com>
size_t klen, u8 *data, size_t data_len);
--- a/net/mac80211/wpa.c
+++ b/net/mac80211/wpa.c
-@@ -43,7 +43,7 @@ ieee80211_tx_h_michael_mic_add(struct ie
+@@ -44,7 +44,7 @@ ieee80211_tx_h_michael_mic_add(struct ie
skb->len < 24 || !ieee80211_is_data_present(hdr->frame_control))
return TX_CONTINUE;
@@ -164,7 +164,7 @@ Signed-off-by: Janusz Dziedzic <janusz.dziedzic at tieto.com>
if (skb->len < hdrlen)
return TX_DROP;
-@@ -186,7 +186,6 @@ mic_fail_no_key:
+@@ -187,7 +187,6 @@ mic_fail_no_key:
static int tkip_encrypt_skb(struct ieee80211_tx_data *tx, struct sk_buff *skb)
{
@@ -172,7 +172,7 @@ Signed-off-by: Janusz Dziedzic <janusz.dziedzic at tieto.com>
struct ieee80211_key *key = tx->key;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
unsigned int hdrlen;
-@@ -201,7 +200,7 @@ static int tkip_encrypt_skb(struct ieee8
+@@ -202,7 +201,7 @@ static int tkip_encrypt_skb(struct ieee8
return 0;
}
@@ -181,7 +181,7 @@ Signed-off-by: Janusz Dziedzic <janusz.dziedzic at tieto.com>
len = skb->len - hdrlen;
if (info->control.hw_key)
-@@ -419,7 +418,7 @@ static int ccmp_encrypt_skb(struct ieee8
+@@ -420,7 +419,7 @@ static int ccmp_encrypt_skb(struct ieee8
return 0;
}
@@ -190,7 +190,7 @@ Signed-off-by: Janusz Dziedzic <janusz.dziedzic at tieto.com>
len = skb->len - hdrlen;
if (info->control.hw_key)
-@@ -652,7 +651,7 @@ static int gcmp_encrypt_skb(struct ieee8
+@@ -653,7 +652,7 @@ static int gcmp_encrypt_skb(struct ieee8
return 0;
}
@@ -199,7 +199,7 @@ Signed-off-by: Janusz Dziedzic <janusz.dziedzic at tieto.com>
len = skb->len - hdrlen;
if (info->control.hw_key)
-@@ -792,7 +791,6 @@ static ieee80211_tx_result
+@@ -793,7 +792,6 @@ static ieee80211_tx_result
ieee80211_crypto_cs_encrypt(struct ieee80211_tx_data *tx,
struct sk_buff *skb)
{
@@ -207,7 +207,7 @@ Signed-off-by: Janusz Dziedzic <janusz.dziedzic at tieto.com>
struct ieee80211_key *key = tx->key;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
int hdrlen;
-@@ -808,8 +806,7 @@ ieee80211_crypto_cs_encrypt(struct ieee8
+@@ -809,8 +807,7 @@ ieee80211_crypto_cs_encrypt(struct ieee8
pskb_expand_head(skb, iv_len, 0, GFP_ATOMIC)))
return TX_DROP;
diff --git a/package/kernel/mac80211/patches/308-mac80211-add-NEED_ALIGNED4_SKBS-hw-flag.patch b/package/kernel/mac80211/patches/308-mac80211-add-NEED_ALIGNED4_SKBS-hw-flag.patch
index 43455773f1..762458ba78 100644
--- a/package/kernel/mac80211/patches/308-mac80211-add-NEED_ALIGNED4_SKBS-hw-flag.patch
+++ b/package/kernel/mac80211/patches/308-mac80211-add-NEED_ALIGNED4_SKBS-hw-flag.patch
@@ -23,7 +23,7 @@ Signed-off-by: Janusz Dziedzic <janusz.dziedzic at tieto.com>
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
-@@ -2043,6 +2043,9 @@ struct ieee80211_txq {
+@@ -2056,6 +2056,9 @@ struct ieee80211_txq {
* The stack will not do fragmentation.
* The callback for @set_frag_threshold should be set as well.
*
@@ -33,7 +33,7 @@ Signed-off-by: Janusz Dziedzic <janusz.dziedzic at tieto.com>
* @NUM_IEEE80211_HW_FLAGS: number of hardware flags, used for sizing arrays
*/
enum ieee80211_hw_flags {
-@@ -2085,6 +2088,7 @@ enum ieee80211_hw_flags {
+@@ -2098,6 +2101,7 @@ enum ieee80211_hw_flags {
IEEE80211_HW_TX_FRAG_LIST,
IEEE80211_HW_REPORTS_LOW_ACK,
IEEE80211_HW_SUPPORTS_TX_FRAG,
@@ -53,7 +53,7 @@ Signed-off-by: Janusz Dziedzic <janusz.dziedzic at tieto.com>
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
-@@ -1553,6 +1553,29 @@ ieee80211_vif_get_num_mcast_if(struct ie
+@@ -1547,6 +1547,29 @@ ieee80211_vif_get_num_mcast_if(struct ie
return -1;
}
@@ -85,7 +85,7 @@ Signed-off-by: Janusz Dziedzic <janusz.dziedzic at tieto.com>
unsigned int mpdu_len,
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
-@@ -282,7 +282,7 @@ struct ieee80211_fast_tx {
+@@ -290,7 +290,7 @@ struct ieee80211_fast_tx {
u8 hdr_len;
u8 sa_offs, da_offs, pn_offs;
u8 band;
@@ -96,7 +96,7 @@ Signed-off-by: Janusz Dziedzic <janusz.dziedzic at tieto.com>
struct rcu_head rcu_head;
--- a/net/mac80211/status.c
+++ b/net/mac80211/status.c
-@@ -693,9 +693,22 @@ void ieee80211_tx_monitor(struct ieee802
+@@ -642,9 +642,22 @@ void ieee80211_tx_monitor(struct ieee802
struct sk_buff *skb2;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct ieee80211_sub_if_data *sdata;
@@ -137,7 +137,7 @@ Signed-off-by: Janusz Dziedzic <janusz.dziedzic at tieto.com>
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
-@@ -1176,8 +1176,7 @@ ieee80211_tx_prepare(struct ieee80211_su
+@@ -1172,8 +1172,7 @@ ieee80211_tx_prepare(struct ieee80211_su
info->flags &= ~IEEE80211_TX_INTFL_NEED_TXPROCESSING;
hdr = (struct ieee80211_hdr *) skb->data;
@@ -147,7 +147,7 @@ Signed-off-by: Janusz Dziedzic <janusz.dziedzic at tieto.com>
if (likely(sta)) {
if (!IS_ERR(sta))
-@@ -2152,7 +2151,7 @@ netdev_tx_t ieee80211_monitor_start_xmit
+@@ -2150,7 +2149,7 @@ netdev_tx_t ieee80211_monitor_start_xmit
goto fail;
hdr = (struct ieee80211_hdr *)(skb->data + len_rthdr);
@@ -156,7 +156,7 @@ Signed-off-by: Janusz Dziedzic <janusz.dziedzic at tieto.com>
if (skb->len < len_rthdr + hdrlen)
goto fail;
-@@ -2370,7 +2369,7 @@ static struct sk_buff *ieee80211_build_h
+@@ -2368,7 +2367,7 @@ static struct sk_buff *ieee80211_build_h
struct ieee80211_chanctx_conf *chanctx_conf;
struct ieee80211_sub_if_data *ap_sdata;
enum nl80211_band band;
@@ -165,7 +165,7 @@ Signed-off-by: Janusz Dziedzic <janusz.dziedzic at tieto.com>
if (IS_ERR(sta))
sta = NULL;
-@@ -2590,6 +2589,9 @@ static struct sk_buff *ieee80211_build_h
+@@ -2588,6 +2587,9 @@ static struct sk_buff *ieee80211_build_h
hdrlen += 2;
}
@@ -175,7 +175,7 @@ Signed-off-by: Janusz Dziedzic <janusz.dziedzic at tieto.com>
/*
* Drop unicast frames to unauthorised stations unless they are
* EAPOL frames from the local station.
-@@ -2670,6 +2672,7 @@ static struct sk_buff *ieee80211_build_h
+@@ -2668,6 +2670,7 @@ static struct sk_buff *ieee80211_build_h
skb_pull(skb, skip_header_bytes);
head_need = hdrlen + encaps_len + meshhdrlen - skb_headroom(skb);
@@ -183,7 +183,7 @@ Signed-off-by: Janusz Dziedzic <janusz.dziedzic at tieto.com>
/*
* So we need to modify the skb header and hence need a copy of
-@@ -2702,6 +2705,9 @@ static struct sk_buff *ieee80211_build_h
+@@ -2700,6 +2703,9 @@ static struct sk_buff *ieee80211_build_h
memcpy(skb_push(skb, meshhdrlen), &mesh_hdr, meshhdrlen);
#endif
@@ -193,7 +193,7 @@ Signed-off-by: Janusz Dziedzic <janusz.dziedzic at tieto.com>
if (ieee80211_is_data_qos(fc)) {
__le16 *qos_control;
-@@ -2877,6 +2883,9 @@ void ieee80211_check_fast_xmit(struct st
+@@ -2875,6 +2881,9 @@ void ieee80211_check_fast_xmit(struct st
fc |= cpu_to_le16(IEEE80211_STYPE_QOS_DATA);
}
@@ -203,7 +203,7 @@ Signed-off-by: Janusz Dziedzic <janusz.dziedzic at tieto.com>
/* We store the key here so there's no point in using rcu_dereference()
* but that's fine because the code that changes the pointers will call
* this function after doing so. For a single CPU that would be enough,
-@@ -3464,7 +3473,7 @@ begin:
+@@ -3461,7 +3470,7 @@ begin:
if (tx.key &&
(tx.key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV))
@@ -214,7 +214,7 @@ Signed-off-by: Janusz Dziedzic <janusz.dziedzic at tieto.com>
tx.key, skb);
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
-@@ -1225,6 +1225,7 @@ void ieee80211_send_auth(struct ieee8021
+@@ -1230,6 +1230,7 @@ void ieee80211_send_auth(struct ieee8021
u32 tx_flags)
{
struct ieee80211_local *local = sdata->local;
@@ -222,8 +222,8 @@ Signed-off-by: Janusz Dziedzic <janusz.dziedzic at tieto.com>
struct sk_buff *skb;
struct ieee80211_mgmt *mgmt;
unsigned int hdrlen;
-@@ -1252,7 +1253,7 @@ void ieee80211_send_auth(struct ieee8021
- memcpy(skb_put(skb, extra_len), extra, extra_len);
+@@ -1256,7 +1257,7 @@ void ieee80211_send_auth(struct ieee8021
+ skb_put_data(skb, extra, extra_len);
if (auth_alg == WLAN_AUTH_SHARED_KEY && transaction == 3) {
- hdrlen = ieee80211_hdrlen(mgmt->frame_control);
diff --git a/package/kernel/mac80211/patches/309-mac80211-minstrel-Enable-STBC-and-LDPC-for-VHT-Rates.patch b/package/kernel/mac80211/patches/309-mac80211-minstrel-Enable-STBC-and-LDPC-for-VHT-Rates.patch
index a62b1bb28e..609b15b832 100644
--- a/package/kernel/mac80211/patches/309-mac80211-minstrel-Enable-STBC-and-LDPC-for-VHT-Rates.patch
+++ b/package/kernel/mac80211/patches/309-mac80211-minstrel-Enable-STBC-and-LDPC-for-VHT-Rates.patch
@@ -10,7 +10,7 @@ Signed-off-by: Chaitanya TK <chaitanya.mgit at gmail.com>
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
-@@ -1553,6 +1553,7 @@ struct ieee80211_vht_operation {
+@@ -1556,6 +1556,7 @@ struct ieee80211_vht_operation {
#define IEEE80211_VHT_CAP_RXSTBC_3 0x00000300
#define IEEE80211_VHT_CAP_RXSTBC_4 0x00000400
#define IEEE80211_VHT_CAP_RXSTBC_MASK 0x00000700
diff --git a/package/kernel/mac80211/patches/310-ath9k-fix-moredata-bit-in-PS-buffered-frame-release.patch b/package/kernel/mac80211/patches/310-ath9k-fix-moredata-bit-in-PS-buffered-frame-release.patch
index b2a74ccbac..c9c74bb836 100644
--- a/package/kernel/mac80211/patches/310-ath9k-fix-moredata-bit-in-PS-buffered-frame-release.patch
+++ b/package/kernel/mac80211/patches/310-ath9k-fix-moredata-bit-in-PS-buffered-frame-release.patch
@@ -7,7 +7,7 @@ Signed-off-by: Felix Fietkau <nbd at nbd.name>
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
-@@ -1694,6 +1694,22 @@ void ath_tx_aggr_wakeup(struct ath_softc
+@@ -1674,6 +1674,22 @@ void ath_tx_aggr_wakeup(struct ath_softc
}
}
@@ -30,7 +30,7 @@ Signed-off-by: Felix Fietkau <nbd at nbd.name>
void ath9k_release_buffered_frames(struct ieee80211_hw *hw,
struct ieee80211_sta *sta,
u16 tids, int nframes,
-@@ -1724,6 +1740,7 @@ void ath9k_release_buffered_frames(struc
+@@ -1704,6 +1720,7 @@ void ath9k_release_buffered_frames(struc
if (!bf)
break;
@@ -38,7 +38,7 @@ Signed-off-by: Felix Fietkau <nbd at nbd.name>
list_add_tail(&bf->list, &bf_q);
ath_set_rates(tid->an->vif, tid->an->sta, bf, true);
if (bf_isampdu(bf)) {
-@@ -1747,6 +1764,9 @@ void ath9k_release_buffered_frames(struc
+@@ -1727,6 +1744,9 @@ void ath9k_release_buffered_frames(struc
if (list_empty(&bf_q))
return;
diff --git a/package/kernel/mac80211/patches/311-ath9k-clear-potentially-stale-EOSP-status-bit-in-int.patch b/package/kernel/mac80211/patches/311-ath9k-clear-potentially-stale-EOSP-status-bit-in-int.patch
index 9863dffc90..1893187e8a 100644
--- a/package/kernel/mac80211/patches/311-ath9k-clear-potentially-stale-EOSP-status-bit-in-int.patch
+++ b/package/kernel/mac80211/patches/311-ath9k-clear-potentially-stale-EOSP-status-bit-in-int.patch
@@ -10,7 +10,7 @@ Signed-off-by: Felix Fietkau <nbd at nbd.name>
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
-@@ -1004,7 +1004,8 @@ ath_tx_get_tid_subframe(struct ath_softc
+@@ -984,7 +984,8 @@ ath_tx_get_tid_subframe(struct ath_softc
bf->bf_lastbf = bf;
tx_info = IEEE80211_SKB_CB(skb);
diff --git a/package/kernel/mac80211/patches/313-ath9k-fix-block-ack-window-tracking-issues.patch b/package/kernel/mac80211/patches/313-ath9k-fix-block-ack-window-tracking-issues.patch
index fb8df08afe..59de1dfe1a 100644
--- a/package/kernel/mac80211/patches/313-ath9k-fix-block-ack-window-tracking-issues.patch
+++ b/package/kernel/mac80211/patches/313-ath9k-fix-block-ack-window-tracking-issues.patch
@@ -75,7 +75,7 @@ Signed-off-by: Felix Fietkau <nbd at nbd.name>
ath_tx_complete_buf(sc, bf, txq,
&bf_head, NULL, ts,
-@@ -1046,11 +1054,14 @@ ath_tx_get_tid_subframe(struct ath_softc
+@@ -1026,11 +1034,14 @@ ath_tx_get_tid_subframe(struct ath_softc
INIT_LIST_HEAD(&bf_head);
list_add(&bf->list, &bf_head);
@@ -91,7 +91,7 @@ Signed-off-by: Felix Fietkau <nbd at nbd.name>
return bf;
}
-@@ -1108,8 +1119,6 @@ ath_tx_form_aggr(struct ath_softc *sc, s
+@@ -1088,8 +1099,6 @@ ath_tx_form_aggr(struct ath_softc *sc, s
bf->bf_next = NULL;
/* link buffers of this frame to the aggregate */
@@ -100,7 +100,7 @@ Signed-off-by: Felix Fietkau <nbd at nbd.name>
bf->bf_state.ndelim = ndelim;
list_add_tail(&bf->list, bf_q);
-@@ -1745,10 +1754,8 @@ void ath9k_release_buffered_frames(struc
+@@ -1725,10 +1734,8 @@ void ath9k_release_buffered_frames(struc
ath9k_set_moredata(sc, bf, true);
list_add_tail(&bf->list, &bf_q);
ath_set_rates(tid->an->vif, tid->an->sta, bf, true);
diff --git a/package/kernel/mac80211/patches/314-ath9k-rename-tx_complete_work-to-hw_check_work.patch b/package/kernel/mac80211/patches/314-ath9k-rename-tx_complete_work-to-hw_check_work.patch
deleted file mode 100644
index 5465df3ccf..0000000000
--- a/package/kernel/mac80211/patches/314-ath9k-rename-tx_complete_work-to-hw_check_work.patch
+++ /dev/null
@@ -1,175 +0,0 @@
-From: Felix Fietkau <nbd at nbd.name>
-Date: Wed, 25 Jan 2017 12:57:05 +0100
-Subject: [PATCH] ath9k: rename tx_complete_work to hw_check_work
-
-Also include common MAC alive check. This should make the hang checks
-more reliable for modes where beacons are not sent and is used as a
-starting point for further hang check improvements
-
-Signed-off-by: Felix Fietkau <nbd at nbd.name>
----
-
---- a/drivers/net/wireless/ath/ath9k/ath9k.h
-+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
-@@ -108,7 +108,7 @@ int ath_descdma_setup(struct ath_softc *
- #define ATH_AGGR_MIN_QDEPTH 2
- /* minimum h/w qdepth for non-aggregated traffic */
- #define ATH_NON_AGGR_MIN_QDEPTH 8
--#define ATH_TX_COMPLETE_POLL_INT 1000
-+#define ATH_HW_CHECK_POLL_INT 1000
- #define ATH_TXFIFO_DEPTH 8
- #define ATH_TX_ERROR 0x01
-
-@@ -745,7 +745,7 @@ void ath9k_csa_update(struct ath_softc *
- #define ATH_PAPRD_TIMEOUT 100 /* msecs */
- #define ATH_PLL_WORK_INTERVAL 100
-
--void ath_tx_complete_poll_work(struct work_struct *work);
-+void ath_hw_check_work(struct work_struct *work);
- void ath_reset_work(struct work_struct *work);
- bool ath_hw_check(struct ath_softc *sc);
- void ath_hw_pll_work(struct work_struct *work);
-@@ -1053,7 +1053,7 @@ struct ath_softc {
- #ifdef CPTCFG_ATH9K_DEBUGFS
- struct ath9k_debug debug;
- #endif
-- struct delayed_work tx_complete_work;
-+ struct delayed_work hw_check_work;
- struct delayed_work hw_pll_work;
- struct timer_list sleep_timer;
-
---- a/drivers/net/wireless/ath/ath9k/init.c
-+++ b/drivers/net/wireless/ath/ath9k/init.c
-@@ -681,6 +681,7 @@ static int ath9k_init_softc(u16 devid, s
- INIT_WORK(&sc->hw_reset_work, ath_reset_work);
- INIT_WORK(&sc->paprd_work, ath_paprd_calibrate);
- INIT_DELAYED_WORK(&sc->hw_pll_work, ath_hw_pll_work);
-+ INIT_DELAYED_WORK(&sc->hw_check_work, ath_hw_check_work);
-
- ath9k_init_channel_context(sc);
-
---- a/drivers/net/wireless/ath/ath9k/link.c
-+++ b/drivers/net/wireless/ath/ath9k/link.c
-@@ -20,20 +20,13 @@
- * TX polling - checks if the TX engine is stuck somewhere
- * and issues a chip reset if so.
- */
--void ath_tx_complete_poll_work(struct work_struct *work)
-+static bool ath_tx_complete_check(struct ath_softc *sc)
- {
-- struct ath_softc *sc = container_of(work, struct ath_softc,
-- tx_complete_work.work);
- struct ath_txq *txq;
- int i;
-- bool needreset = false;
--
-
-- if (sc->tx99_state) {
-- ath_dbg(ath9k_hw_common(sc->sc_ah), RESET,
-- "skip tx hung detection on tx99\n");
-- return;
-- }
-+ if (sc->tx99_state)
-+ return true;
-
- for (i = 0; i < IEEE80211_NUM_ACS; i++) {
- txq = sc->tx.txq_map[i];
-@@ -41,25 +34,36 @@ void ath_tx_complete_poll_work(struct wo
- ath_txq_lock(sc, txq);
- if (txq->axq_depth) {
- if (txq->axq_tx_inprogress) {
-- needreset = true;
- ath_txq_unlock(sc, txq);
-- break;
-- } else {
-- txq->axq_tx_inprogress = true;
-+ goto reset;
- }
-+
-+ txq->axq_tx_inprogress = true;
- }
- ath_txq_unlock(sc, txq);
- }
-
-- if (needreset) {
-- ath_dbg(ath9k_hw_common(sc->sc_ah), RESET,
-- "tx hung, resetting the chip\n");
-- ath9k_queue_reset(sc, RESET_TYPE_TX_HANG);
-+ return true;
-+
-+reset:
-+ ath_dbg(ath9k_hw_common(sc->sc_ah), RESET,
-+ "tx hung, resetting the chip\n");
-+ ath9k_queue_reset(sc, RESET_TYPE_TX_HANG);
-+ return false;
-+
-+}
-+
-+void ath_hw_check_work(struct work_struct *work)
-+{
-+ struct ath_softc *sc = container_of(work, struct ath_softc,
-+ hw_check_work.work);
-+
-+ if (!ath_hw_check(sc) ||
-+ !ath_tx_complete_check(sc))
- return;
-- }
-
-- ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work,
-- msecs_to_jiffies(ATH_TX_COMPLETE_POLL_INT));
-+ ieee80211_queue_delayed_work(sc->hw, &sc->hw_check_work,
-+ msecs_to_jiffies(ATH_HW_CHECK_POLL_INT));
- }
-
- /*
---- a/drivers/net/wireless/ath/ath9k/main.c
-+++ b/drivers/net/wireless/ath/ath9k/main.c
-@@ -181,7 +181,7 @@ void ath9k_ps_restore(struct ath_softc *
- static void __ath_cancel_work(struct ath_softc *sc)
- {
- cancel_work_sync(&sc->paprd_work);
-- cancel_delayed_work_sync(&sc->tx_complete_work);
-+ cancel_delayed_work_sync(&sc->hw_check_work);
- cancel_delayed_work_sync(&sc->hw_pll_work);
-
- #ifdef CPTCFG_ATH9K_BTCOEX_SUPPORT
-@@ -198,7 +198,8 @@ void ath_cancel_work(struct ath_softc *s
-
- void ath_restart_work(struct ath_softc *sc)
- {
-- ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, 0);
-+ ieee80211_queue_delayed_work(sc->hw, &sc->hw_check_work,
-+ ATH_HW_CHECK_POLL_INT);
-
- if (AR_SREV_9340(sc->sc_ah) || AR_SREV_9330(sc->sc_ah))
- ieee80211_queue_delayed_work(sc->hw, &sc->hw_pll_work,
-@@ -2091,7 +2092,7 @@ void __ath9k_flush(struct ieee80211_hw *
- int timeout;
- bool drain_txq;
-
-- cancel_delayed_work_sync(&sc->tx_complete_work);
-+ cancel_delayed_work_sync(&sc->hw_check_work);
-
- if (ah->ah_flags & AH_UNPLUGGED) {
- ath_dbg(common, ANY, "Device has been unplugged!\n");
-@@ -2129,7 +2130,8 @@ void __ath9k_flush(struct ieee80211_hw *
- ath9k_ps_restore(sc);
- }
-
-- ieee80211_queue_delayed_work(hw, &sc->tx_complete_work, 0);
-+ ieee80211_queue_delayed_work(hw, &sc->hw_check_work,
-+ ATH_HW_CHECK_POLL_INT);
- }
-
- static bool ath9k_tx_frames_pending(struct ieee80211_hw *hw)
---- a/drivers/net/wireless/ath/ath9k/xmit.c
-+++ b/drivers/net/wireless/ath/ath9k/xmit.c
-@@ -2916,8 +2916,6 @@ int ath_tx_init(struct ath_softc *sc, in
- return error;
- }
-
-- INIT_DELAYED_WORK(&sc->tx_complete_work, ath_tx_complete_poll_work);
--
- if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA)
- error = ath_tx_edma_init(sc);
-
diff --git a/package/kernel/mac80211/patches/315-ath9k_hw-check-if-the-chip-failed-to-wake-up.patch b/package/kernel/mac80211/patches/315-ath9k_hw-check-if-the-chip-failed-to-wake-up.patch
deleted file mode 100644
index b0cb74ad05..0000000000
--- a/package/kernel/mac80211/patches/315-ath9k_hw-check-if-the-chip-failed-to-wake-up.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From: Felix Fietkau <nbd at nbd.name>
-Date: Wed, 25 Jan 2017 12:58:17 +0100
-Subject: [PATCH] ath9k_hw: check if the chip failed to wake up
-
-In an RFC patch, Sven Eckelmann and Simon Wunderlich reported:
-
-"QCA 802.11n chips (especially AR9330/AR9340) sometimes end up in a
-state in which a read of AR_CFG always returns 0xdeadbeef.
-This should not happen when when the power_mode of the device is
-ATH9K_PM_AWAKE."
-
-Include the check for the default register state in the existing MAC
-hang check.
-
-Signed-off-by: Felix Fietkau <nbd at nbd.name>
----
-
---- a/drivers/net/wireless/ath/ath9k/hw.c
-+++ b/drivers/net/wireless/ath/ath9k/hw.c
-@@ -1624,6 +1624,10 @@ bool ath9k_hw_check_alive(struct ath_hw
- int count = 50;
- u32 reg, last_val;
-
-+ /* Check if chip failed to wake up */
-+ if (REG_READ(ah, AR_CFG) == 0xdeadbeef)
-+ return false;
-+
- if (AR_SREV_9300(ah))
- return !ath9k_hw_detect_mac_hang(ah);
-
diff --git a/package/kernel/mac80211/patches/316-ath9k-fix-race-condition-in-enabling-disabling-IRQs.patch b/package/kernel/mac80211/patches/316-ath9k-fix-race-condition-in-enabling-disabling-IRQs.patch
deleted file mode 100644
index 7a41206132..0000000000
--- a/package/kernel/mac80211/patches/316-ath9k-fix-race-condition-in-enabling-disabling-IRQs.patch
+++ /dev/null
@@ -1,197 +0,0 @@
-From: Felix Fietkau <nbd at nbd.name>
-Date: Wed, 25 Jan 2017 15:10:37 +0100
-Subject: [PATCH] ath9k: fix race condition in enabling/disabling IRQs
-
-The code currently relies on refcounting to disable IRQs from within the
-IRQ handler and re-enabling them again after the tasklet has run.
-
-However, due to race conditions sometimes the IRQ handler might be
-called twice, or the tasklet may not run at all (if interrupted in the
-middle of a reset).
-
-This can cause nasty imbalances in the irq-disable refcount which will
-get the driver permanently stuck until the entire radio has been stopped
-and started again (ath_reset will not recover from this).
-
-Instead of using this fragile logic, change the code to ensure that
-running the irq handler during tasklet processing is safe, and leave the
-refcount untouched.
-
-Cc: stable at vger.kernel.org
-Signed-off-by: Felix Fietkau <nbd at nbd.name>
----
-
---- a/drivers/net/wireless/ath/ath9k/ath9k.h
-+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
-@@ -998,6 +998,7 @@ struct ath_softc {
- struct survey_info *cur_survey;
- struct survey_info survey[ATH9K_NUM_CHANNELS];
-
-+ spinlock_t intr_lock;
- struct tasklet_struct intr_tq;
- struct tasklet_struct bcon_tasklet;
- struct ath_hw *sc_ah;
---- a/drivers/net/wireless/ath/ath9k/init.c
-+++ b/drivers/net/wireless/ath/ath9k/init.c
-@@ -669,6 +669,7 @@ static int ath9k_init_softc(u16 devid, s
- common->bt_ant_diversity = 1;
-
- spin_lock_init(&common->cc_lock);
-+ spin_lock_init(&sc->intr_lock);
- spin_lock_init(&sc->sc_serial_rw);
- spin_lock_init(&sc->sc_pm_lock);
- spin_lock_init(&sc->chan_lock);
---- a/drivers/net/wireless/ath/ath9k/mac.c
-+++ b/drivers/net/wireless/ath/ath9k/mac.c
-@@ -810,21 +810,12 @@ void ath9k_hw_disable_interrupts(struct
- }
- EXPORT_SYMBOL(ath9k_hw_disable_interrupts);
-
--void ath9k_hw_enable_interrupts(struct ath_hw *ah)
-+static void __ath9k_hw_enable_interrupts(struct ath_hw *ah)
- {
- struct ath_common *common = ath9k_hw_common(ah);
- u32 sync_default = AR_INTR_SYNC_DEFAULT;
- u32 async_mask;
-
-- if (!(ah->imask & ATH9K_INT_GLOBAL))
-- return;
--
-- if (!atomic_inc_and_test(&ah->intr_ref_cnt)) {
-- ath_dbg(common, INTERRUPT, "Do not enable IER ref count %d\n",
-- atomic_read(&ah->intr_ref_cnt));
-- return;
-- }
--
- if (AR_SREV_9340(ah) || AR_SREV_9550(ah) || AR_SREV_9531(ah) ||
- AR_SREV_9561(ah))
- sync_default &= ~AR_INTR_SYNC_HOST1_FATAL;
-@@ -846,6 +837,39 @@ void ath9k_hw_enable_interrupts(struct a
- ath_dbg(common, INTERRUPT, "AR_IMR 0x%x IER 0x%x\n",
- REG_READ(ah, AR_IMR), REG_READ(ah, AR_IER));
- }
-+
-+void ath9k_hw_resume_interrupts(struct ath_hw *ah)
-+{
-+ struct ath_common *common = ath9k_hw_common(ah);
-+
-+ if (!(ah->imask & ATH9K_INT_GLOBAL))
-+ return;
-+
-+ if (atomic_read(&ah->intr_ref_cnt) != 0) {
-+ ath_dbg(common, INTERRUPT, "Do not enable IER ref count %d\n",
-+ atomic_read(&ah->intr_ref_cnt));
-+ return;
-+ }
-+
-+ __ath9k_hw_enable_interrupts(ah);
-+}
-+EXPORT_SYMBOL(ath9k_hw_resume_interrupts);
-+
-+void ath9k_hw_enable_interrupts(struct ath_hw *ah)
-+{
-+ struct ath_common *common = ath9k_hw_common(ah);
-+
-+ if (!(ah->imask & ATH9K_INT_GLOBAL))
-+ return;
-+
-+ if (!atomic_inc_and_test(&ah->intr_ref_cnt)) {
-+ ath_dbg(common, INTERRUPT, "Do not enable IER ref count %d\n",
-+ atomic_read(&ah->intr_ref_cnt));
-+ return;
-+ }
-+
-+ __ath9k_hw_enable_interrupts(ah);
-+}
- EXPORT_SYMBOL(ath9k_hw_enable_interrupts);
-
- void ath9k_hw_set_interrupts(struct ath_hw *ah)
---- a/drivers/net/wireless/ath/ath9k/mac.h
-+++ b/drivers/net/wireless/ath/ath9k/mac.h
-@@ -744,6 +744,7 @@ void ath9k_hw_set_interrupts(struct ath_
- void ath9k_hw_enable_interrupts(struct ath_hw *ah);
- void ath9k_hw_disable_interrupts(struct ath_hw *ah);
- void ath9k_hw_kill_interrupts(struct ath_hw *ah);
-+void ath9k_hw_resume_interrupts(struct ath_hw *ah);
-
- void ar9002_hw_attach_mac_ops(struct ath_hw *ah);
-
---- a/drivers/net/wireless/ath/ath9k/main.c
-+++ b/drivers/net/wireless/ath/ath9k/main.c
-@@ -374,21 +374,20 @@ void ath9k_tasklet(unsigned long data)
- struct ath_common *common = ath9k_hw_common(ah);
- enum ath_reset_type type;
- unsigned long flags;
-- u32 status = sc->intrstatus;
-+ u32 status;
- u32 rxmask;
-
-+ spin_lock_irqsave(&sc->intr_lock, flags);
-+ status = sc->intrstatus;
-+ sc->intrstatus = 0;
-+ spin_unlock_irqrestore(&sc->intr_lock, flags);
-+
- ath9k_ps_wakeup(sc);
- spin_lock(&sc->sc_pcu_lock);
-
- if (status & ATH9K_INT_FATAL) {
- type = RESET_TYPE_FATAL_INT;
- ath9k_queue_reset(sc, type);
--
-- /*
-- * Increment the ref. counter here so that
-- * interrupts are enabled in the reset routine.
-- */
-- atomic_inc(&ah->intr_ref_cnt);
- ath_dbg(common, RESET, "FATAL: Skipping interrupts\n");
- goto out;
- }
-@@ -404,11 +403,6 @@ void ath9k_tasklet(unsigned long data)
- type = RESET_TYPE_BB_WATCHDOG;
- ath9k_queue_reset(sc, type);
-
-- /*
-- * Increment the ref. counter here so that
-- * interrupts are enabled in the reset routine.
-- */
-- atomic_inc(&ah->intr_ref_cnt);
- ath_dbg(common, RESET,
- "BB_WATCHDOG: Skipping interrupts\n");
- goto out;
-@@ -421,7 +415,6 @@ void ath9k_tasklet(unsigned long data)
- if ((sc->gtt_cnt >= MAX_GTT_CNT) && !ath9k_hw_check_alive(ah)) {
- type = RESET_TYPE_TX_GTT;
- ath9k_queue_reset(sc, type);
-- atomic_inc(&ah->intr_ref_cnt);
- ath_dbg(common, RESET,
- "GTT: Skipping interrupts\n");
- goto out;
-@@ -478,7 +471,7 @@ void ath9k_tasklet(unsigned long data)
- ath9k_btcoex_handle_interrupt(sc, status);
-
- /* re-enable hardware interrupt */
-- ath9k_hw_enable_interrupts(ah);
-+ ath9k_hw_resume_interrupts(ah);
- out:
- spin_unlock(&sc->sc_pcu_lock);
- ath9k_ps_restore(sc);
-@@ -542,7 +535,9 @@ irqreturn_t ath_isr(int irq, void *dev)
- return IRQ_NONE;
-
- /* Cache the status */
-- sc->intrstatus = status;
-+ spin_lock(&sc->intr_lock);
-+ sc->intrstatus |= status;
-+ spin_unlock(&sc->intr_lock);
-
- if (status & SCHED_INTR)
- sched = true;
-@@ -588,7 +583,7 @@ chip_reset:
-
- if (sched) {
- /* turn off every interrupt */
-- ath9k_hw_disable_interrupts(ah);
-+ ath9k_hw_kill_interrupts(ah);
- tasklet_schedule(&sc->intr_tq);
- }
-
diff --git a/package/kernel/mac80211/patches/318-0001-brcmfmac-check-brcmf_bus_get_memdump-result-for-erro.patch b/package/kernel/mac80211/patches/318-0001-brcmfmac-check-brcmf_bus_get_memdump-result-for-erro.patch
deleted file mode 100644
index 4ae4c606c5..0000000000
--- a/package/kernel/mac80211/patches/318-0001-brcmfmac-check-brcmf_bus_get_memdump-result-for-erro.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal at milecki.pl>
-Date: Mon, 30 Jan 2017 16:09:51 +0100
-Subject: [PATCH] brcmfmac: check brcmf_bus_get_memdump result for error
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This method may be unsupported (see: USB bus) or may just fail (see:
-SDIO bus).
-While at it rework logic in brcmf_sdio_bus_get_memdump function to avoid
-too many conditional code nesting levels.
-
-Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
-Acked-by: Arend van Spriel <arend.vanspriel at broadcom.com>
-Signed-off-by: Kalle Valo <kvalo at codeaurora.org>
----
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.c
-@@ -32,16 +32,25 @@ static int brcmf_debug_create_memdump(st
- {
- void *dump;
- size_t ramsize;
-+ int err;
-
- ramsize = brcmf_bus_get_ramsize(bus);
-- if (ramsize) {
-- dump = vzalloc(len + ramsize);
-- if (!dump)
-- return -ENOMEM;
-- memcpy(dump, data, len);
-- brcmf_bus_get_memdump(bus, dump + len, ramsize);
-- dev_coredumpv(bus->dev, dump, len + ramsize, GFP_KERNEL);
-+ if (!ramsize)
-+ return -ENOTSUPP;
-+
-+ dump = vzalloc(len + ramsize);
-+ if (!dump)
-+ return -ENOMEM;
-+
-+ memcpy(dump, data, len);
-+ err = brcmf_bus_get_memdump(bus, dump + len, ramsize);
-+ if (err) {
-+ vfree(dump);
-+ return err;
- }
-+
-+ dev_coredumpv(bus->dev, dump, len + ramsize, GFP_KERNEL);
-+
- return 0;
- }
-
diff --git a/package/kernel/mac80211/patches/319-0002-brcmfmac-be-more-verbose-when-PSM-s-watchdog-fires.patch b/package/kernel/mac80211/patches/319-0002-brcmfmac-be-more-verbose-when-PSM-s-watchdog-fires.patch
deleted file mode 100644
index 2a3b83864e..0000000000
--- a/package/kernel/mac80211/patches/319-0002-brcmfmac-be-more-verbose-when-PSM-s-watchdog-fires.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal at milecki.pl>
-Date: Mon, 30 Jan 2017 16:09:52 +0100
-Subject: [PATCH] brcmfmac: be more verbose when PSM's watchdog fires
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's important to inform user so he knows things went wrong. He may also
-want to get memory dump for further debugging purposes.
-
-Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
-Acked-by: Arend van Spriel <arend.vanspriel at broadcom.com>
-Signed-off-by: Kalle Valo <kvalo at codeaurora.org>
----
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.c
-@@ -58,10 +58,18 @@ static int brcmf_debug_psm_watchdog_noti
- const struct brcmf_event_msg *evtmsg,
- void *data)
- {
-+ int err;
-+
- brcmf_dbg(TRACE, "enter: bsscfgidx=%d\n", ifp->bsscfgidx);
-
-- return brcmf_debug_create_memdump(ifp->drvr->bus_if, data,
-- evtmsg->datalen);
-+ brcmf_err("PSM's watchdog has fired!\n");
-+
-+ err = brcmf_debug_create_memdump(ifp->drvr->bus_if, data,
-+ evtmsg->datalen);
-+ if (err)
-+ brcmf_err("Failed to get memory dump, %d\n", err);
-+
-+ return err;
- }
-
- void brcmf_debugfs_init(void)
diff --git a/package/kernel/mac80211/patches/319-0003-brcmfmac-use-wiphy_read_of_freq_limits-to-respect-li.patch b/package/kernel/mac80211/patches/319-0003-brcmfmac-use-wiphy_read_of_freq_limits-to-respect-li.patch
deleted file mode 100644
index 6448bad5e9..0000000000
--- a/package/kernel/mac80211/patches/319-0003-brcmfmac-use-wiphy_read_of_freq_limits-to-respect-li.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From 0f83ff69735651cc7a3d150466a5257ff829b62b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal at milecki.pl>
-Date: Tue, 17 Jan 2017 23:35:50 +0100
-Subject: [PATCH] brcmfmac: use wiphy_read_of_freq_limits to respect limits
- from DT
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This new helper reads extra frequency limits specified in DT and
-disables unavailable chanels. This is useful for devices (like home
-routers) with chipsets limited e.g. by board design.
-
-In order to respect info read from DT we simply need to check for
-IEEE80211_CHAN_DISABLED bit when constructing channel info.
-
-Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
-Signed-off-by: Kalle Valo <kvalo at codeaurora.org>
----
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-@@ -5908,6 +5908,9 @@ static int brcmf_construct_chaninfo(stru
- continue;
- }
-
-+ if (channel->orig_flags & IEEE80211_CHAN_DISABLED)
-+ continue;
-+
- /* assuming the chanspecs order is HT20,
- * HT40 upper, HT40 lower, and VHT80.
- */
-@@ -6509,6 +6512,9 @@ static int brcmf_setup_wiphy(struct wiph
- wiphy->bands[NL80211_BAND_5GHZ] = band;
- }
- }
-+
-+ wiphy_read_of_freq_limits(wiphy);
-+
- return 0;
- }
-
diff --git a/package/kernel/mac80211/patches/319-0004-brcmfmac-merge-two-brcmf_err-macros-into-one.patch b/package/kernel/mac80211/patches/319-0004-brcmfmac-merge-two-brcmf_err-macros-into-one.patch
deleted file mode 100644
index defd5792ea..0000000000
--- a/package/kernel/mac80211/patches/319-0004-brcmfmac-merge-two-brcmf_err-macros-into-one.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From 9587a01a7ead9efc5032c16e0d9668de58be1186 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal at milecki.pl>
-Date: Thu, 2 Feb 2017 22:33:13 +0100
-Subject: [PATCH] brcmfmac: merge two brcmf_err macros into one
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This allows simplifying the code by adding a simple IS_ENABLED check for
-CONFIG_BRCMDB symbol.
-
-Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
-Acked-by: Arend van Spriel <arend.vanspriel at broadcom.com>
-Signed-off-by: Kalle Valo <kvalo at codeaurora.org>
----
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h | 8 ++------
- 1 file changed, 2 insertions(+), 6 deletions(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h
-@@ -45,20 +45,16 @@
- #undef pr_fmt
- #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-+#ifndef CPTCFG_BRCM_TRACING
- /* Macro for error messages. net_ratelimit() is used when driver
- * debugging is not selected. When debugging the driver error
- * messages are as important as other tracing or even more so.
- */
--#ifndef CPTCFG_BRCM_TRACING
--#ifdef CPTCFG_BRCMDBG
--#define brcmf_err(fmt, ...) pr_err("%s: " fmt, __func__, ##__VA_ARGS__)
--#else
- #define brcmf_err(fmt, ...) \
- do { \
-- if (net_ratelimit()) \
-+ if (IS_ENABLED(CPTCFG_BRCMDBG) || net_ratelimit()) \
- pr_err("%s: " fmt, __func__, ##__VA_ARGS__); \
- } while (0)
--#endif
- #else
- __printf(2, 3)
- void __brcmf_err(const char *func, const char *fmt, ...);
diff --git a/package/kernel/mac80211/patches/319-0005-brcmfmac-switch-to-C-function-__brcmf_err-for-printi.patch b/package/kernel/mac80211/patches/319-0005-brcmfmac-switch-to-C-function-__brcmf_err-for-printi.patch
deleted file mode 100644
index 5baf6960ec..0000000000
--- a/package/kernel/mac80211/patches/319-0005-brcmfmac-switch-to-C-function-__brcmf_err-for-printi.patch
+++ /dev/null
@@ -1,69 +0,0 @@
-From 087fa712a00685dac4bcc64b7c3dc8ae6bee8026 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal at milecki.pl>
-Date: Thu, 2 Feb 2017 22:33:14 +0100
-Subject: [PATCH] brcmfmac: switch to C function (__brcmf_err) for printing
- errors
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This will allow extending code and using more detailed messages e.g.
-with the help of dev_err.
-
-Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
-Acked-by: Arend van Spriel <arend.vanspriel at broadcom.com>
-Signed-off-by: Kalle Valo <kvalo at codeaurora.org>
----
- .../net/wireless/broadcom/brcm80211/brcmfmac/common.c | 16 ++++++++++++++++
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h | 6 +++---
- 2 files changed, 19 insertions(+), 3 deletions(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
-@@ -218,6 +218,22 @@ done:
- return err;
- }
-
-+#ifndef CPTCFG_BRCM_TRACING
-+void __brcmf_err(const char *func, const char *fmt, ...)
-+{
-+ struct va_format vaf;
-+ va_list args;
-+
-+ va_start(args, fmt);
-+
-+ vaf.fmt = fmt;
-+ vaf.va = &args;
-+ pr_err("%s: %pV", func, &vaf);
-+
-+ va_end(args);
-+}
-+#endif
-+
- #if defined(CPTCFG_BRCM_TRACING) || defined(CPTCFG_BRCMDBG)
- void __brcmf_dbg(u32 level, const char *func, const char *fmt, ...)
- {
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h
-@@ -45,6 +45,8 @@
- #undef pr_fmt
- #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-+__printf(2, 3)
-+void __brcmf_err(const char *func, const char *fmt, ...);
- #ifndef CPTCFG_BRCM_TRACING
- /* Macro for error messages. net_ratelimit() is used when driver
- * debugging is not selected. When debugging the driver error
-@@ -53,11 +55,9 @@
- #define brcmf_err(fmt, ...) \
- do { \
- if (IS_ENABLED(CPTCFG_BRCMDBG) || net_ratelimit()) \
-- pr_err("%s: " fmt, __func__, ##__VA_ARGS__); \
-+ __brcmf_err(__func__, fmt, ##__VA_ARGS__); \
- } while (0)
- #else
--__printf(2, 3)
--void __brcmf_err(const char *func, const char *fmt, ...);
- #define brcmf_err(fmt, ...) \
- __brcmf_err(__func__, fmt, ##__VA_ARGS__)
- #endif
diff --git a/package/kernel/mac80211/patches/319-0006-brcmfmac-merge-two-remaining-brcmf_err-macros.patch b/package/kernel/mac80211/patches/319-0006-brcmfmac-merge-two-remaining-brcmf_err-macros.patch
deleted file mode 100644
index 3aaddb800d..0000000000
--- a/package/kernel/mac80211/patches/319-0006-brcmfmac-merge-two-remaining-brcmf_err-macros.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From d0630555650a394cf5743268820511f527a561a5 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal at milecki.pl>
-Date: Thu, 2 Feb 2017 22:33:15 +0100
-Subject: [PATCH] brcmfmac: merge two remaining brcmf_err macros
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Now we always have __brcmf_err function we can do perfectly fine with
-just one macro.
-
-Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
-Acked-by: Arend van Spriel <arend.vanspriel at broadcom.com>
-Signed-off-by: Kalle Valo <kvalo at codeaurora.org>
----
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h | 14 +++++---------
- 1 file changed, 5 insertions(+), 9 deletions(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h
-@@ -47,20 +47,16 @@
-
- __printf(2, 3)
- void __brcmf_err(const char *func, const char *fmt, ...);
--#ifndef CPTCFG_BRCM_TRACING
--/* Macro for error messages. net_ratelimit() is used when driver
-- * debugging is not selected. When debugging the driver error
-- * messages are as important as other tracing or even more so.
-+/* Macro for error messages. When debugging / tracing the driver all error
-+ * messages are important to us.
- */
- #define brcmf_err(fmt, ...) \
- do { \
-- if (IS_ENABLED(CPTCFG_BRCMDBG) || net_ratelimit()) \
-+ if (IS_ENABLED(CPTCFG_BRCMDBG) || \
-+ IS_ENABLED(CPTCFG_BRCM_TRACING) || \
-+ net_ratelimit()) \
- __brcmf_err(__func__, fmt, ##__VA_ARGS__); \
- } while (0)
--#else
--#define brcmf_err(fmt, ...) \
-- __brcmf_err(__func__, fmt, ##__VA_ARGS__)
--#endif
-
- #if defined(DEBUG) || defined(CPTCFG_BRCM_TRACING)
- __printf(3, 4)
diff --git a/package/kernel/mac80211/patches/320-ath9k-clean-up-and-fix-ath_tx_count_airtime.patch b/package/kernel/mac80211/patches/320-ath9k-clean-up-and-fix-ath_tx_count_airtime.patch
deleted file mode 100644
index a6a3bfca6d..0000000000
--- a/package/kernel/mac80211/patches/320-ath9k-clean-up-and-fix-ath_tx_count_airtime.patch
+++ /dev/null
@@ -1,107 +0,0 @@
-From: Felix Fietkau <nbd at nbd.name>
-Date: Sun, 12 Feb 2017 13:13:05 +0100
-Subject: [PATCH] ath9k: clean up and fix ath_tx_count_airtime
-
-ath_tx_count_airtime is doing a lot of unnecessary work:
-
-- Redundant station lookup
-- Redundant rcu_read_lock/unlock
-- Useless memcpy of bf->rates
-- Useless NULL check of bf->bf_mpdu
-- Redundant lookup of the skb tid
-
-Additionally, it tries to look up the mac80211 queue index from the txq,
-which fails if the frame was delivered via the power save queue.
-
-This patch fixes all of these issues by passing down the right set of
-pointers instead of doing extra work
-
-Cc: stable at vger.kernel.org
-Fixes: 63fefa050477 ("ath9k: Introduce airtime fairness scheduling between stations")
-Signed-off-by: Felix Fietkau <nbd at nbd.name>
----
-
---- a/drivers/net/wireless/ath/ath9k/xmit.c
-+++ b/drivers/net/wireless/ath/ath9k/xmit.c
-@@ -723,51 +723,31 @@ static bool bf_is_ampdu_not_probing(stru
- return bf_isampdu(bf) && !(info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE);
- }
-
--static void ath_tx_count_airtime(struct ath_softc *sc, struct ath_txq *txq,
-- struct ath_buf *bf, struct ath_tx_status *ts)
-+static void ath_tx_count_airtime(struct ath_softc *sc, struct ath_node *an,
-+ struct ath_atx_tid *tid, struct ath_buf *bf,
-+ struct ath_tx_status *ts)
- {
-- struct ath_node *an;
-- struct ath_acq *acq = &sc->cur_chan->acq[txq->mac80211_qnum];
-- struct sk_buff *skb;
-- struct ieee80211_hdr *hdr;
-- struct ieee80211_hw *hw = sc->hw;
-- struct ieee80211_tx_rate rates[4];
-- struct ieee80211_sta *sta;
-- int i;
-+ struct ath_txq *txq = tid->txq;
- u32 airtime = 0;
--
-- skb = bf->bf_mpdu;
-- if(!skb)
-- return;
--
-- hdr = (struct ieee80211_hdr *)skb->data;
-- memcpy(rates, bf->rates, sizeof(rates));
--
-- rcu_read_lock();
--
-- sta = ieee80211_find_sta_by_ifaddr(hw, hdr->addr1, hdr->addr2);
-- if(!sta)
-- goto exit;
--
--
-- an = (struct ath_node *) sta->drv_priv;
-+ int i;
-
- airtime += ts->duration * (ts->ts_longretry + 1);
-+ for(i = 0; i < ts->ts_rateindex; i++) {
-+ int rate_dur = ath9k_hw_get_duration(sc->sc_ah, bf->bf_desc, i);
-+ airtime += rate_dur * bf->rates[i].count;
-+ }
-
-- for(i=0; i < ts->ts_rateindex; i++)
-- airtime += ath9k_hw_get_duration(sc->sc_ah, bf->bf_desc, i) * rates[i].count;
-+ if (sc->airtime_flags & AIRTIME_USE_TX) {
-+ int q = txq->mac80211_qnum;
-+ struct ath_acq *acq = &sc->cur_chan->acq[q];
-
-- if (!!(sc->airtime_flags & AIRTIME_USE_TX)) {
- spin_lock_bh(&acq->lock);
-- an->airtime_deficit[txq->mac80211_qnum] -= airtime;
-- if (an->airtime_deficit[txq->mac80211_qnum] <= 0)
-- __ath_tx_queue_tid(sc, ath_get_skb_tid(sc, an, skb));
-+ an->airtime_deficit[q] -= airtime;
-+ if (an->airtime_deficit[q] <= 0)
-+ __ath_tx_queue_tid(sc, tid);
- spin_unlock_bh(&acq->lock);
- }
- ath_debug_airtime(sc, an, 0, airtime);
--
--exit:
-- rcu_read_unlock();
- }
-
- static void ath_tx_process_buffer(struct ath_softc *sc, struct ath_txq *txq,
-@@ -791,13 +771,13 @@ static void ath_tx_process_buffer(struct
-
- ts->duration = ath9k_hw_get_duration(sc->sc_ah, bf->bf_desc,
- ts->ts_rateindex);
-- ath_tx_count_airtime(sc, txq, bf, ts);
-
- hdr = (struct ieee80211_hdr *) bf->bf_mpdu->data;
- sta = ieee80211_find_sta_by_ifaddr(hw, hdr->addr1, hdr->addr2);
- if (sta) {
- struct ath_node *an = (struct ath_node *)sta->drv_priv;
- tid = ath_get_skb_tid(sc, an, bf->bf_mpdu);
-+ ath_tx_count_airtime(sc, an, tid, bf, ts);
- if (ts->ts_status & (ATH9K_TXERR_FILT | ATH9K_TXERR_XRETRY))
- tid->clear_ps_filter = true;
- }
diff --git a/package/kernel/mac80211/patches/321-mac80211-fix-CSA-in-IBSS-mode.patch b/package/kernel/mac80211/patches/321-mac80211-fix-CSA-in-IBSS-mode.patch
deleted file mode 100644
index 13765b2900..0000000000
--- a/package/kernel/mac80211/patches/321-mac80211-fix-CSA-in-IBSS-mode.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From: Koen Vandeputte <koen.vandeputte at ncentric.com>
-Date: Wed, 8 Feb 2017 15:29:45 +0100
-Subject: [PATCH] mac80211: fix CSA in IBSS mode
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Add the missing IBSS capability flag during capability init as it needs
-to be inserted into the generated beacon in order for CSA to work.
-
-Signed-off-by: Piotr Gawlowicz <gawlowicz at tkn.tu-berlin.de>
-Signed-off-by: Mikołaj Chwalisz <chwalisz at tkn.tu-berlin.de>
-Tested-by: Koen Vandeputte <koen.vandeputte at ncentric.com>
----
-
---- a/net/mac80211/ibss.c
-+++ b/net/mac80211/ibss.c
-@@ -487,14 +487,14 @@ int ieee80211_ibss_csa_beacon(struct iee
- struct beacon_data *presp, *old_presp;
- struct cfg80211_bss *cbss;
- const struct cfg80211_bss_ies *ies;
-- u16 capability = 0;
-+ u16 capability = WLAN_CAPABILITY_IBSS;
- u64 tsf;
- int ret = 0;
-
- sdata_assert_lock(sdata);
-
- if (ifibss->privacy)
-- capability = WLAN_CAPABILITY_PRIVACY;
-+ capability |= WLAN_CAPABILITY_PRIVACY;
-
- cbss = cfg80211_get_bss(sdata->local->hw.wiphy, ifibss->chandef.chan,
- ifibss->bssid, ifibss->ssid,
diff --git a/package/kernel/mac80211/patches/322-mac80211-don-t-handle-filtered-frames-within-a-BA-se.patch b/package/kernel/mac80211/patches/322-mac80211-don-t-handle-filtered-frames-within-a-BA-se.patch
deleted file mode 100644
index 66e1bfb4c1..0000000000
--- a/package/kernel/mac80211/patches/322-mac80211-don-t-handle-filtered-frames-within-a-BA-se.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From: Felix Fietkau <nbd at nbd.name>
-Date: Wed, 22 Feb 2017 16:13:17 +0100
-Subject: [PATCH] mac80211: don't handle filtered frames within a BA session
-
-When running a BA session, the driver (or the hardware) already takes
-care of retransmitting failed frames, since it has to keep the receiver
-reorder window in sync.
-
-Adding another layer of retransmit around that does not improve
-anything. In fact, it can only lead to some strong reordering with huge
-latency.
-
-Cc: stable at vger.kernel.org
-Signed-off-by: Felix Fietkau <nbd at nbd.name>
----
-
---- a/net/mac80211/status.c
-+++ b/net/mac80211/status.c
-@@ -51,7 +51,8 @@ static void ieee80211_handle_filtered_fr
- struct ieee80211_hdr *hdr = (void *)skb->data;
- int ac;
-
-- if (info->flags & IEEE80211_TX_CTL_NO_PS_BUFFER) {
-+ if (info->flags & (IEEE80211_TX_CTL_NO_PS_BUFFER |
-+ IEEE80211_TX_CTL_AMPDU)) {
- ieee80211_free_txskb(&local->hw, skb);
- return;
- }
diff --git a/package/kernel/mac80211/patches/323-0001-brcmfmac-Use-net_device_stats-from-struct-net_device.patch b/package/kernel/mac80211/patches/323-0001-brcmfmac-Use-net_device_stats-from-struct-net_device.patch
deleted file mode 100644
index 81567d8757..0000000000
--- a/package/kernel/mac80211/patches/323-0001-brcmfmac-Use-net_device_stats-from-struct-net_device.patch
+++ /dev/null
@@ -1,112 +0,0 @@
-From 91b632803ee4e47c5a5c4dc3d8bf5abf9c16107a Mon Sep 17 00:00:00 2001
-From: Tobias Klauser <tklauser at distanz.ch>
-Date: Mon, 13 Feb 2017 11:14:09 +0100
-Subject: [PATCH] brcmfmac: Use net_device_stats from struct net_device
-
-Instead of using a private copy of struct net_device_stats in struct
-brcm_if, use stats from struct net_device. Also remove the now
-unnecessary .ndo_get_stats function.
-
-Signed-off-by: Tobias Klauser <tklauser at distanz.ch>
-Acked-by: Arend van Spriel <arend.vanspriel at broadcom.com>
-Signed-off-by: Kalle Valo <kvalo at codeaurora.org>
----
- .../wireless/broadcom/brcm80211/brcmfmac/core.c | 26 +++++++---------------
- .../wireless/broadcom/brcm80211/brcmfmac/core.h | 2 --
- 2 files changed, 8 insertions(+), 20 deletions(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
-@@ -249,10 +249,10 @@ static netdev_tx_t brcmf_netdev_start_xm
-
- done:
- if (ret) {
-- ifp->stats.tx_dropped++;
-+ ndev->stats.tx_dropped++;
- } else {
-- ifp->stats.tx_packets++;
-- ifp->stats.tx_bytes += skb->len;
-+ ndev->stats.tx_packets++;
-+ ndev->stats.tx_bytes += skb->len;
- }
-
- /* Return ok: we always eat the packet */
-@@ -296,15 +296,15 @@ void brcmf_txflowblock(struct device *de
- void brcmf_netif_rx(struct brcmf_if *ifp, struct sk_buff *skb)
- {
- if (skb->pkt_type == PACKET_MULTICAST)
-- ifp->stats.multicast++;
-+ ifp->ndev->stats.multicast++;
-
- if (!(ifp->ndev->flags & IFF_UP)) {
- brcmu_pkt_buf_free_skb(skb);
- return;
- }
-
-- ifp->stats.rx_bytes += skb->len;
-- ifp->stats.rx_packets++;
-+ ifp->ndev->stats.rx_bytes += skb->len;
-+ ifp->ndev->stats.rx_packets++;
-
- brcmf_dbg(DATA, "rx proto=0x%X\n", ntohs(skb->protocol));
- if (in_interrupt())
-@@ -327,7 +327,7 @@ static int brcmf_rx_hdrpull(struct brcmf
-
- if (ret || !(*ifp) || !(*ifp)->ndev) {
- if (ret != -ENODATA && *ifp)
-- (*ifp)->stats.rx_errors++;
-+ (*ifp)->ndev->stats.rx_errors++;
- brcmu_pkt_buf_free_skb(skb);
- return -ENODATA;
- }
-@@ -388,7 +388,7 @@ void brcmf_txfinalize(struct brcmf_if *i
- }
-
- if (!success)
-- ifp->stats.tx_errors++;
-+ ifp->ndev->stats.tx_errors++;
-
- brcmu_pkt_buf_free_skb(txp);
- }
-@@ -411,15 +411,6 @@ void brcmf_txcomplete(struct device *dev
- }
- }
-
--static struct net_device_stats *brcmf_netdev_get_stats(struct net_device *ndev)
--{
-- struct brcmf_if *ifp = netdev_priv(ndev);
--
-- brcmf_dbg(TRACE, "Enter, bsscfgidx=%d\n", ifp->bsscfgidx);
--
-- return &ifp->stats;
--}
--
- static void brcmf_ethtool_get_drvinfo(struct net_device *ndev,
- struct ethtool_drvinfo *info)
- {
-@@ -492,7 +483,6 @@ static int brcmf_netdev_open(struct net_
- static const struct net_device_ops brcmf_netdev_ops_pri = {
- .ndo_open = brcmf_netdev_open,
- .ndo_stop = brcmf_netdev_stop,
-- .ndo_get_stats = brcmf_netdev_get_stats,
- .ndo_start_xmit = brcmf_netdev_start_xmit,
- .ndo_set_mac_address = brcmf_netdev_set_mac_address,
- .ndo_set_rx_mode = brcmf_netdev_set_multicast_list
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h
-@@ -171,7 +171,6 @@ enum brcmf_netif_stop_reason {
- * @drvr: points to device related information.
- * @vif: points to cfg80211 specific interface information.
- * @ndev: associated network device.
-- * @stats: interface specific network statistics.
- * @multicast_work: worker object for multicast provisioning.
- * @ndoffload_work: worker object for neighbor discovery offload configuration.
- * @fws_desc: interface specific firmware-signalling descriptor.
-@@ -187,7 +186,6 @@ struct brcmf_if {
- struct brcmf_pub *drvr;
- struct brcmf_cfg80211_vif *vif;
- struct net_device *ndev;
-- struct net_device_stats stats;
- struct work_struct multicast_work;
- struct work_struct ndoffload_work;
- struct brcmf_fws_mac_descriptor *fws_desc;
diff --git a/package/kernel/mac80211/patches/323-0002-brcmfmac-always-print-error-when-PSM-s-watchdog-fire.patch b/package/kernel/mac80211/patches/323-0002-brcmfmac-always-print-error-when-PSM-s-watchdog-fire.patch
deleted file mode 100644
index 7272b889c0..0000000000
--- a/package/kernel/mac80211/patches/323-0002-brcmfmac-always-print-error-when-PSM-s-watchdog-fire.patch
+++ /dev/null
@@ -1,148 +0,0 @@
-From f1ac3aa212af6dd0a36dc07a63f95f91be6f4935 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal at milecki.pl>
-Date: Fri, 24 Feb 2017 17:32:46 +0100
-Subject: [PATCH] brcmfmac: always print error when PSM's watchdog fires
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-So far we were attaching BRCMF_E_PSM_WATCHDOG event listener in
-brcmf_debug_attach which gets compiled only with CONFIG_BRCMDBG. This
-event means something went wrong and firmware / hardware usually can't
-be expected to work (reliably).
-
-Such a problem is significant for user experience so I believe we should
-print an error unconditionally (even with debugging disabled). What can
-be indeed optional is dumping bus memory as this is clearly part of
-debugging process.
-
-In the future we may also try to extend this listener by trying to
-recover from the error or at least signal it to the cfg80211.
-
-Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
-Signed-off-by: Kalle Valo <kvalo at codeaurora.org>
----
- .../wireless/broadcom/brcm80211/brcmfmac/core.c | 22 ++++++++++++++++++
- .../wireless/broadcom/brcm80211/brcmfmac/debug.c | 26 +++-------------------
- .../wireless/broadcom/brcm80211/brcmfmac/debug.h | 9 ++++++++
- 3 files changed, 34 insertions(+), 23 deletions(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
-@@ -738,6 +738,24 @@ void brcmf_remove_interface(struct brcmf
- brcmf_del_if(ifp->drvr, ifp->bsscfgidx, rtnl_locked);
- }
-
-+static int brcmf_psm_watchdog_notify(struct brcmf_if *ifp,
-+ const struct brcmf_event_msg *evtmsg,
-+ void *data)
-+{
-+ int err;
-+
-+ brcmf_dbg(TRACE, "enter: bsscfgidx=%d\n", ifp->bsscfgidx);
-+
-+ brcmf_err("PSM's watchdog has fired!\n");
-+
-+ err = brcmf_debug_create_memdump(ifp->drvr->bus_if, data,
-+ evtmsg->datalen);
-+ if (err)
-+ brcmf_err("Failed to get memory dump, %d\n", err);
-+
-+ return err;
-+}
-+
- #ifdef CONFIG_INET
- #define ARPOL_MAX_ENTRIES 8
- static int brcmf_inetaddr_changed(struct notifier_block *nb,
-@@ -917,6 +935,10 @@ int brcmf_attach(struct device *dev, str
- goto fail;
- }
-
-+ /* Attach to events important for core code */
-+ brcmf_fweh_register(drvr, BRCMF_E_PSM_WATCHDOG,
-+ brcmf_psm_watchdog_notify);
-+
- /* attach firmware event handler */
- brcmf_fweh_attach(drvr);
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.c
-@@ -27,8 +27,8 @@
-
- static struct dentry *root_folder;
-
--static int brcmf_debug_create_memdump(struct brcmf_bus *bus, const void *data,
-- size_t len)
-+int brcmf_debug_create_memdump(struct brcmf_bus *bus, const void *data,
-+ size_t len)
- {
- void *dump;
- size_t ramsize;
-@@ -54,24 +54,6 @@ static int brcmf_debug_create_memdump(st
- return 0;
- }
-
--static int brcmf_debug_psm_watchdog_notify(struct brcmf_if *ifp,
-- const struct brcmf_event_msg *evtmsg,
-- void *data)
--{
-- int err;
--
-- brcmf_dbg(TRACE, "enter: bsscfgidx=%d\n", ifp->bsscfgidx);
--
-- brcmf_err("PSM's watchdog has fired!\n");
--
-- err = brcmf_debug_create_memdump(ifp->drvr->bus_if, data,
-- evtmsg->datalen);
-- if (err)
-- brcmf_err("Failed to get memory dump, %d\n", err);
--
-- return err;
--}
--
- void brcmf_debugfs_init(void)
- {
- root_folder = debugfs_create_dir(KBUILD_MODNAME, NULL);
-@@ -99,9 +81,7 @@ int brcmf_debug_attach(struct brcmf_pub
- if (IS_ERR(drvr->dbgfs_dir))
- return PTR_ERR(drvr->dbgfs_dir);
-
--
-- return brcmf_fweh_register(drvr, BRCMF_E_PSM_WATCHDOG,
-- brcmf_debug_psm_watchdog_notify);
-+ return 0;
- }
-
- void brcmf_debug_detach(struct brcmf_pub *drvr)
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h
-@@ -99,6 +99,7 @@ do { \
-
- extern int brcmf_msg_level;
-
-+struct brcmf_bus;
- struct brcmf_pub;
- #ifdef DEBUG
- void brcmf_debugfs_init(void);
-@@ -108,6 +109,8 @@ void brcmf_debug_detach(struct brcmf_pub
- struct dentry *brcmf_debugfs_get_devdir(struct brcmf_pub *drvr);
- int brcmf_debugfs_add_entry(struct brcmf_pub *drvr, const char *fn,
- int (*read_fn)(struct seq_file *seq, void *data));
-+int brcmf_debug_create_memdump(struct brcmf_bus *bus, const void *data,
-+ size_t len);
- #else
- static inline void brcmf_debugfs_init(void)
- {
-@@ -128,6 +131,12 @@ int brcmf_debugfs_add_entry(struct brcmf
- {
- return 0;
- }
-+static inline
-+int brcmf_debug_create_memdump(struct brcmf_bus *bus, const void *data,
-+ size_t len)
-+{
-+ return 0;
-+}
- #endif
-
- #endif /* BRCMFMAC_DEBUG_H */
diff --git a/package/kernel/mac80211/patches/323-0003-brcmfmac-Do-not-print-the-firmware-version-as-an-err.patch b/package/kernel/mac80211/patches/323-0003-brcmfmac-Do-not-print-the-firmware-version-as-an-err.patch
deleted file mode 100644
index 3ab9b66e08..0000000000
--- a/package/kernel/mac80211/patches/323-0003-brcmfmac-Do-not-print-the-firmware-version-as-an-err.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From d79fe4cb70d8deab7b8dc1de547ed4b915574414 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede at redhat.com>
-Date: Wed, 8 Mar 2017 14:50:15 +0100
-Subject: [PATCH] brcmfmac: Do not print the firmware version as an error
-
-Using pr_err for things which are not errors is a bad idea. E.g. it
-will cause the plymouth bootsplash screen to drop back to the text
-console so that the user can see the error, which is not what we
-normally want to happen.
-
-Instead add a new brcmf_info macro and use that.
-
-Signed-off-by: Hans de Goede <hdegoede at redhat.com>
-Acked-by: Arend van Spriel <arend.vanspriel at broadcom.com>
-Signed-off-by: Kalle Valo <kvalo at codeaurora.org>
----
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c | 2 +-
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h | 9 +++++++++
- 2 files changed, 10 insertions(+), 1 deletion(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
-@@ -161,7 +161,7 @@ int brcmf_c_preinit_dcmds(struct brcmf_i
- strsep(&ptr, "\n");
-
- /* Print fw version info */
-- brcmf_err("Firmware version = %s\n", buf);
-+ brcmf_info("Firmware version = %s\n", buf);
-
- /* locate firmware version number for ethtool */
- ptr = strrchr(buf, ' ') + 1;
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h
-@@ -59,6 +59,10 @@ void __brcmf_err(const char *func, const
- } while (0)
-
- #if defined(DEBUG) || defined(CPTCFG_BRCM_TRACING)
-+
-+/* For debug/tracing purposes treat info messages as errors */
-+#define brcmf_info brcmf_err
-+
- __printf(3, 4)
- void __brcmf_dbg(u32 level, const char *func, const char *fmt, ...);
- #define brcmf_dbg(level, fmt, ...) \
-@@ -77,6 +81,11 @@ do { \
-
- #else /* defined(DEBUG) || defined(CPTCFG_BRCM_TRACING) */
-
-+#define brcmf_info(fmt, ...) \
-+ do { \
-+ pr_info("%s: " fmt, __func__, ##__VA_ARGS__); \
-+ } while (0)
-+
- #define brcmf_dbg(level, fmt, ...) no_printk(fmt, ##__VA_ARGS__)
-
- #define BRCMF_DATA_ON() 0
diff --git a/package/kernel/mac80211/patches/323-0004-brcmfmac-Do-not-complain-about-country-code-00.patch b/package/kernel/mac80211/patches/323-0004-brcmfmac-Do-not-complain-about-country-code-00.patch
deleted file mode 100644
index f4570e71b1..0000000000
--- a/package/kernel/mac80211/patches/323-0004-brcmfmac-Do-not-complain-about-country-code-00.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 26e537884a8ef451f5c60f6949b1615069931ffa Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede at redhat.com>
-Date: Wed, 8 Mar 2017 14:50:16 +0100
-Subject: [PATCH] brcmfmac: Do not complain about country code "00"
-
-The country code gets set to "00" by default at boot, ignore this
-rather then logging an error about it.
-
-Signed-off-by: Hans de Goede <hdegoede at redhat.com>
-Acked-by: Arend van Spriel <arend.vanspriel at broadcom.com>
-Signed-off-by: Kalle Valo <kvalo at codeaurora.org>
----
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-@@ -6736,6 +6736,10 @@ static void brcmf_cfg80211_reg_notifier(
- s32 err;
- int i;
-
-+ /* The country code gets set to "00" by default at boot, ignore */
-+ if (req->alpha2[0] == '0' && req->alpha2[1] == '0')
-+ return;
-+
- /* ignore non-ISO3166 country codes */
- for (i = 0; i < sizeof(req->alpha2); i++)
- if (req->alpha2[i] < 'A' || req->alpha2[i] > 'Z') {
diff --git a/package/kernel/mac80211/patches/323-0005-brcmfmac-Handle-status-BRCMF_E_STATUS_ABORT-in-cfg80.patch b/package/kernel/mac80211/patches/323-0005-brcmfmac-Handle-status-BRCMF_E_STATUS_ABORT-in-cfg80.patch
deleted file mode 100644
index 0f2d54e1dd..0000000000
--- a/package/kernel/mac80211/patches/323-0005-brcmfmac-Handle-status-BRCMF_E_STATUS_ABORT-in-cfg80.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From b9472a2e3e452c414634b3ccb1ef6c4098878686 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede at redhat.com>
-Date: Wed, 8 Mar 2017 14:50:17 +0100
-Subject: [PATCH] brcmfmac: Handle status == BRCMF_E_STATUS_ABORT in
- cfg80211_escan_handler
-
-If a scan gets aborted BRCMF_SCAN_STATUS_BUSY gets cleared in
-cfg->scan_status and when we receive an abort event from the firmware
-the BRCMF_SCAN_STATUS_BUSY check in the cfg80211_escan_handler will
-trigger resulting in multiple errors getting logged.
-
-Check for a status of BRCMF_E_STATUS_ABORT and in this case simply
-cleanly exit the cfg80211_escan_handler. This also avoids a
-BRCMF_E_STATUS_ABORT event arriving after a new scan has been started
-causing the new scan to complete prematurely without any data.
-
-Signed-off-by: Hans de Goede <hdegoede at redhat.com>
-Acked-by: Arend van Spriel <arend.vanspriel at broadcom.com>
-Signed-off-by: Kalle Valo <kvalo at codeaurora.org>
----
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-@@ -3097,6 +3097,9 @@ brcmf_cfg80211_escan_handler(struct brcm
-
- status = e->status;
-
-+ if (status == BRCMF_E_STATUS_ABORT)
-+ goto exit;
-+
- if (!test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) {
- brcmf_err("scan not ready, bsscfgidx=%d\n", ifp->bsscfgidx);
- return -EPERM;
diff --git a/package/kernel/mac80211/patches/323-0006-brcmfmac-move-brcmf_txflowblock-to-bcdc-layer.patch b/package/kernel/mac80211/patches/323-0006-brcmfmac-move-brcmf_txflowblock-to-bcdc-layer.patch
deleted file mode 100644
index b947cd1de9..0000000000
--- a/package/kernel/mac80211/patches/323-0006-brcmfmac-move-brcmf_txflowblock-to-bcdc-layer.patch
+++ /dev/null
@@ -1,137 +0,0 @@
-From 20ec4f57498f8770c7a1a3e2a316fa752a424178 Mon Sep 17 00:00:00 2001
-From: Franky Lin <franky.lin at broadcom.com>
-Date: Fri, 10 Mar 2017 21:17:02 +0000
-Subject: [PATCH] brcmfmac: move brcmf_txflowblock to bcdc layer
-
-brcmf_txflowblock is invoked by sdio and usb bus module which are using
-bcdc protocol. This patch makes it a bcdc API instead of a core module
-function.
-
-Reviewed-by: Arend Van Spriel <arend.vanspriel at broadcom.com>
-Signed-off-by: Franky Lin <franky.lin at broadcom.com>
-Signed-off-by: Arend van Spriel <arend.vanspriel at broadcom.com>
-Signed-off-by: Kalle Valo <kvalo at codeaurora.org>
----
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c | 10 ++++++++++
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.h | 1 +
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h | 2 --
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c | 10 ----------
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 5 +++--
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c | 5 +++--
- 6 files changed, 17 insertions(+), 16 deletions(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c
-@@ -345,6 +345,16 @@ brcmf_proto_bcdc_txdata(struct brcmf_pub
- return brcmf_bus_txdata(drvr->bus_if, pktbuf);
- }
-
-+void brcmf_proto_bcdc_txflowblock(struct device *dev, bool state)
-+{
-+ struct brcmf_bus *bus_if = dev_get_drvdata(dev);
-+ struct brcmf_pub *drvr = bus_if->drvr;
-+
-+ brcmf_dbg(TRACE, "Enter\n");
-+
-+ brcmf_fws_bus_blocked(drvr, state);
-+}
-+
- static void
- brcmf_proto_bcdc_configure_addr_mode(struct brcmf_pub *drvr, int ifidx,
- enum proto_addr_mode addr_mode)
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.h
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.h
-@@ -19,6 +19,7 @@
- #ifdef CPTCFG_BRCMFMAC_PROTO_BCDC
- int brcmf_proto_bcdc_attach(struct brcmf_pub *drvr);
- void brcmf_proto_bcdc_detach(struct brcmf_pub *drvr);
-+void brcmf_proto_bcdc_txflowblock(struct device *dev, bool state);
- #else
- static inline int brcmf_proto_bcdc_attach(struct brcmf_pub *drvr) { return 0; }
- static inline void brcmf_proto_bcdc_detach(struct brcmf_pub *drvr) {}
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h
-@@ -229,8 +229,6 @@ int brcmf_attach(struct device *dev, str
- void brcmf_detach(struct device *dev);
- /* Indication from bus module that dongle should be reset */
- void brcmf_dev_reset(struct device *dev);
--/* Indication from bus module to change flow-control state */
--void brcmf_txflowblock(struct device *dev, bool state);
-
- /* Notify the bus has transferred the tx packet to firmware */
- void brcmf_txcomplete(struct device *dev, struct sk_buff *txp, bool success);
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
-@@ -283,16 +283,6 @@ void brcmf_txflowblock_if(struct brcmf_i
- spin_unlock_irqrestore(&ifp->netif_stop_lock, flags);
- }
-
--void brcmf_txflowblock(struct device *dev, bool state)
--{
-- struct brcmf_bus *bus_if = dev_get_drvdata(dev);
-- struct brcmf_pub *drvr = bus_if->drvr;
--
-- brcmf_dbg(TRACE, "Enter\n");
--
-- brcmf_fws_bus_blocked(drvr, state);
--}
--
- void brcmf_netif_rx(struct brcmf_if *ifp, struct sk_buff *skb)
- {
- if (skb->pkt_type == PACKET_MULTICAST)
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
-@@ -44,6 +44,7 @@
- #include "firmware.h"
- #include "core.h"
- #include "common.h"
-+#include "bcdc.h"
-
- #define DCMD_RESP_TIMEOUT msecs_to_jiffies(2500)
- #define CTL_DONE_TIMEOUT msecs_to_jiffies(2500)
-@@ -2328,7 +2329,7 @@ static uint brcmf_sdio_sendfromq(struct
- if ((bus->sdiodev->state == BRCMF_SDIOD_DATA) &&
- bus->txoff && (pktq_len(&bus->txq) < TXLOW)) {
- bus->txoff = false;
-- brcmf_txflowblock(bus->sdiodev->dev, false);
-+ brcmf_proto_bcdc_txflowblock(bus->sdiodev->dev, false);
- }
-
- return cnt;
-@@ -2753,7 +2754,7 @@ static int brcmf_sdio_bus_txdata(struct
-
- if (pktq_len(&bus->txq) >= TXHI) {
- bus->txoff = true;
-- brcmf_txflowblock(dev, true);
-+ brcmf_proto_bcdc_txflowblock(dev, true);
- }
- spin_unlock_bh(&bus->txq_lock);
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
-@@ -29,6 +29,7 @@
- #include "usb.h"
- #include "core.h"
- #include "common.h"
-+#include "bcdc.h"
-
-
- #define IOCTL_RESP_TIMEOUT msecs_to_jiffies(2000)
-@@ -488,7 +489,7 @@ static void brcmf_usb_tx_complete(struct
- spin_lock_irqsave(&devinfo->tx_flowblock_lock, flags);
- if (devinfo->tx_freecount > devinfo->tx_high_watermark &&
- devinfo->tx_flowblock) {
-- brcmf_txflowblock(devinfo->dev, false);
-+ brcmf_proto_bcdc_txflowblock(devinfo->dev, false);
- devinfo->tx_flowblock = false;
- }
- spin_unlock_irqrestore(&devinfo->tx_flowblock_lock, flags);
-@@ -635,7 +636,7 @@ static int brcmf_usb_tx(struct device *d
- spin_lock_irqsave(&devinfo->tx_flowblock_lock, flags);
- if (devinfo->tx_freecount < devinfo->tx_low_watermark &&
- !devinfo->tx_flowblock) {
-- brcmf_txflowblock(dev, true);
-+ brcmf_proto_bcdc_txflowblock(dev, true);
- devinfo->tx_flowblock = true;
- }
- spin_unlock_irqrestore(&devinfo->tx_flowblock_lock, flags);
diff --git a/package/kernel/mac80211/patches/323-0007-brcmfmac-move-brcmf_txcomplete-to-bcdc-layer.patch b/package/kernel/mac80211/patches/323-0007-brcmfmac-move-brcmf_txcomplete-to-bcdc-layer.patch
deleted file mode 100644
index 9614e53e51..0000000000
--- a/package/kernel/mac80211/patches/323-0007-brcmfmac-move-brcmf_txcomplete-to-bcdc-layer.patch
+++ /dev/null
@@ -1,122 +0,0 @@
-From 7b584396b7a760bc77bbde4625f83ef173159d3e Mon Sep 17 00:00:00 2001
-From: Franky Lin <franky.lin at broadcom.com>
-Date: Fri, 10 Mar 2017 21:17:03 +0000
-Subject: [PATCH] brcmfmac: move brcmf_txcomplete to bcdc layer
-
-brcmf_txcomplete is invoked by sdio and usb bus module which are using
-bcdc protocol. So move it from core module into bcdc layer.
-
-Signed-off-by: Franky Lin <franky.lin at broadcom.com>
-Signed-off-by: Arend van Spriel <arend.vanspriel at broadcom.com>
-Signed-off-by: Kalle Valo <kvalo at codeaurora.org>
----
- .../net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c | 20 ++++++++++++++++++++
- .../net/wireless/broadcom/brcm80211/brcmfmac/bcdc.h | 2 ++
- .../net/wireless/broadcom/brcm80211/brcmfmac/bus.h | 3 ---
- .../net/wireless/broadcom/brcm80211/brcmfmac/core.c | 18 ------------------
- .../net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 3 ++-
- .../net/wireless/broadcom/brcm80211/brcmfmac/usb.c | 2 +-
- 6 files changed, 25 insertions(+), 23 deletions(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c
-@@ -355,6 +355,26 @@ void brcmf_proto_bcdc_txflowblock(struct
- brcmf_fws_bus_blocked(drvr, state);
- }
-
-+void
-+brcmf_proto_bcdc_txcomplete(struct device *dev, struct sk_buff *txp,
-+ bool success)
-+{
-+ struct brcmf_bus *bus_if = dev_get_drvdata(dev);
-+ struct brcmf_pub *drvr = bus_if->drvr;
-+ struct brcmf_if *ifp;
-+
-+ /* await txstatus signal for firmware if active */
-+ if (brcmf_fws_fc_active(drvr->fws)) {
-+ if (!success)
-+ brcmf_fws_bustxfail(drvr->fws, txp);
-+ } else {
-+ if (brcmf_proto_bcdc_hdrpull(drvr, false, txp, &ifp))
-+ brcmu_pkt_buf_free_skb(txp);
-+ else
-+ brcmf_txfinalize(ifp, txp, success);
-+ }
-+}
-+
- static void
- brcmf_proto_bcdc_configure_addr_mode(struct brcmf_pub *drvr, int ifidx,
- enum proto_addr_mode addr_mode)
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.h
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.h
-@@ -20,6 +20,8 @@
- int brcmf_proto_bcdc_attach(struct brcmf_pub *drvr);
- void brcmf_proto_bcdc_detach(struct brcmf_pub *drvr);
- void brcmf_proto_bcdc_txflowblock(struct device *dev, bool state);
-+void brcmf_proto_bcdc_txcomplete(struct device *dev, struct sk_buff *txp,
-+ bool success);
- #else
- static inline int brcmf_proto_bcdc_attach(struct brcmf_pub *drvr) { return 0; }
- static inline void brcmf_proto_bcdc_detach(struct brcmf_pub *drvr) {}
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h
-@@ -230,9 +230,6 @@ void brcmf_detach(struct device *dev);
- /* Indication from bus module that dongle should be reset */
- void brcmf_dev_reset(struct device *dev);
-
--/* Notify the bus has transferred the tx packet to firmware */
--void brcmf_txcomplete(struct device *dev, struct sk_buff *txp, bool success);
--
- /* Configure the "global" bus state used by upper layers */
- void brcmf_bus_change_state(struct brcmf_bus *bus, enum brcmf_bus_state state);
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
-@@ -383,24 +383,6 @@ void brcmf_txfinalize(struct brcmf_if *i
- brcmu_pkt_buf_free_skb(txp);
- }
-
--void brcmf_txcomplete(struct device *dev, struct sk_buff *txp, bool success)
--{
-- struct brcmf_bus *bus_if = dev_get_drvdata(dev);
-- struct brcmf_pub *drvr = bus_if->drvr;
-- struct brcmf_if *ifp;
--
-- /* await txstatus signal for firmware if active */
-- if (brcmf_fws_fc_active(drvr->fws)) {
-- if (!success)
-- brcmf_fws_bustxfail(drvr->fws, txp);
-- } else {
-- if (brcmf_proto_hdrpull(drvr, false, txp, &ifp))
-- brcmu_pkt_buf_free_skb(txp);
-- else
-- brcmf_txfinalize(ifp, txp, success);
-- }
--}
--
- static void brcmf_ethtool_get_drvinfo(struct net_device *ndev,
- struct ethtool_drvinfo *info)
- {
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
-@@ -2266,7 +2266,8 @@ done:
- bus->tx_seq = (bus->tx_seq + pktq->qlen) % SDPCM_SEQ_WRAP;
- skb_queue_walk_safe(pktq, pkt_next, tmp) {
- __skb_unlink(pkt_next, pktq);
-- brcmf_txcomplete(bus->sdiodev->dev, pkt_next, ret == 0);
-+ brcmf_proto_bcdc_txcomplete(bus->sdiodev->dev, pkt_next,
-+ ret == 0);
- }
- return ret;
- }
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
-@@ -483,7 +483,7 @@ static void brcmf_usb_tx_complete(struct
- req->skb);
- brcmf_usb_del_fromq(devinfo, req);
-
-- brcmf_txcomplete(devinfo->dev, req->skb, urb->status == 0);
-+ brcmf_proto_bcdc_txcomplete(devinfo->dev, req->skb, urb->status == 0);
- req->skb = NULL;
- brcmf_usb_enq(devinfo, &devinfo->tx_freeq, req, &devinfo->tx_freecount);
- spin_lock_irqsave(&devinfo->tx_flowblock_lock, flags);
diff --git a/package/kernel/mac80211/patches/323-0008-brcmfmac-wrap-brcmf_fws_add_interface-into-bcdc-laye.patch b/package/kernel/mac80211/patches/323-0008-brcmfmac-wrap-brcmf_fws_add_interface-into-bcdc-laye.patch
deleted file mode 100644
index a68c6ab0c3..0000000000
--- a/package/kernel/mac80211/patches/323-0008-brcmfmac-wrap-brcmf_fws_add_interface-into-bcdc-laye.patch
+++ /dev/null
@@ -1,95 +0,0 @@
-From 9fdc64bbdbe7bd546e0fbcedd2f1c03448c6df42 Mon Sep 17 00:00:00 2001
-From: Franky Lin <franky.lin at broadcom.com>
-Date: Fri, 10 Mar 2017 21:17:04 +0000
-Subject: [PATCH] brcmfmac: wrap brcmf_fws_add_interface into bcdc layer
-
-fwsignal is only used by bcdc. Create a new protocol interface function
-brcmf_proto_add_if for core module to notify protocol layer upon a new
-interface is created.
-
-Signed-off-by: Franky Lin <franky.lin at broadcom.com>
-Signed-off-by: Arend van Spriel <arend.vanspriel at broadcom.com>
-Signed-off-by: Kalle Valo <kvalo at codeaurora.org>
----
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c | 7 +++++++
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c | 2 +-
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c | 3 ++-
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/proto.h | 9 +++++++++
- 4 files changed, 19 insertions(+), 2 deletions(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c
-@@ -399,6 +399,12 @@ static void brcmf_proto_bcdc_rxreorder(s
- brcmf_fws_rxreorder(ifp, skb);
- }
-
-+static void
-+brcmf_proto_bcdc_add_if(struct brcmf_if *ifp)
-+{
-+ brcmf_fws_add_interface(ifp);
-+}
-+
- int brcmf_proto_bcdc_attach(struct brcmf_pub *drvr)
- {
- struct brcmf_bcdc *bcdc;
-@@ -422,6 +428,7 @@ int brcmf_proto_bcdc_attach(struct brcmf
- drvr->proto->delete_peer = brcmf_proto_bcdc_delete_peer;
- drvr->proto->add_tdls_peer = brcmf_proto_bcdc_add_tdls_peer;
- drvr->proto->rxreorder = brcmf_proto_bcdc_rxreorder;
-+ drvr->proto->add_if = brcmf_proto_bcdc_add_if;
- drvr->proto->pd = bcdc;
-
- drvr->hdrlen += BCDC_HEADER_LEN + BRCMF_PROT_FW_SIGNAL_MAX_TXBYTES;
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
-@@ -990,7 +990,7 @@ int brcmf_bus_started(struct device *dev
- if (ret < 0)
- goto fail;
-
-- brcmf_fws_add_interface(ifp);
-+ brcmf_proto_add_if(drvr, ifp);
-
- drvr->config = brcmf_cfg80211_attach(drvr, bus_if->dev,
- drvr->settings->p2p_enable);
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c
-@@ -25,6 +25,7 @@
- #include "fwsignal.h"
- #include "fweh.h"
- #include "fwil.h"
-+#include "proto.h"
-
- /**
- * struct brcmf_fweh_queue_item - event item on event queue.
-@@ -172,7 +173,7 @@ static void brcmf_fweh_handle_if_event(s
- if (IS_ERR(ifp))
- return;
- if (!is_p2pdev)
-- brcmf_fws_add_interface(ifp);
-+ brcmf_proto_add_if(drvr, ifp);
- if (!drvr->fweh.evt_handler[BRCMF_E_IF])
- if (brcmf_net_attach(ifp, false) < 0)
- return;
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/proto.h
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/proto.h
-@@ -44,6 +44,7 @@ struct brcmf_proto {
- void (*add_tdls_peer)(struct brcmf_pub *drvr, int ifidx,
- u8 peer[ETH_ALEN]);
- void (*rxreorder)(struct brcmf_if *ifp, struct sk_buff *skb);
-+ void (*add_if)(struct brcmf_if *ifp);
- void *pd;
- };
-
-@@ -118,4 +119,12 @@ brcmf_proto_rxreorder(struct brcmf_if *i
- ifp->drvr->proto->rxreorder(ifp, skb);
- }
-
-+static inline void
-+brcmf_proto_add_if(struct brcmf_pub *drvr, struct brcmf_if *ifp)
-+{
-+ if (!drvr->proto->add_if)
-+ return;
-+ drvr->proto->add_if(ifp);
-+}
-+
- #endif /* BRCMFMAC_PROTO_H */
diff --git a/package/kernel/mac80211/patches/323-0009-brcmfmac-wrap-brcmf_fws_del_interface-into-bcdc-laye.patch b/package/kernel/mac80211/patches/323-0009-brcmfmac-wrap-brcmf_fws_del_interface-into-bcdc-laye.patch
deleted file mode 100644
index ded8d7b944..0000000000
--- a/package/kernel/mac80211/patches/323-0009-brcmfmac-wrap-brcmf_fws_del_interface-into-bcdc-laye.patch
+++ /dev/null
@@ -1,83 +0,0 @@
-From c02a5eb82056f75615cb48aa540bfd245f489b99 Mon Sep 17 00:00:00 2001
-From: Franky Lin <franky.lin at broadcom.com>
-Date: Fri, 10 Mar 2017 21:17:05 +0000
-Subject: [PATCH] brcmfmac: wrap brcmf_fws_del_interface into bcdc layer
-
-Create a new protocol interface function brcmf_proto_del_if for core
-module to notify protocol layer upon interface deletion.
-
-Signed-off-by: Franky Lin <franky.lin at broadcom.com>
-Signed-off-by: Arend van Spriel <arend.vanspriel at broadcom.com>
-Signed-off-by: Kalle Valo <kvalo at codeaurora.org>
----
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c | 7 +++++++
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c | 4 ++--
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/proto.h | 9 +++++++++
- 3 files changed, 18 insertions(+), 2 deletions(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c
-@@ -405,6 +405,12 @@ brcmf_proto_bcdc_add_if(struct brcmf_if
- brcmf_fws_add_interface(ifp);
- }
-
-+static void
-+brcmf_proto_bcdc_del_if(struct brcmf_if *ifp)
-+{
-+ brcmf_fws_del_interface(ifp);
-+}
-+
- int brcmf_proto_bcdc_attach(struct brcmf_pub *drvr)
- {
- struct brcmf_bcdc *bcdc;
-@@ -429,6 +435,7 @@ int brcmf_proto_bcdc_attach(struct brcmf
- drvr->proto->add_tdls_peer = brcmf_proto_bcdc_add_tdls_peer;
- drvr->proto->rxreorder = brcmf_proto_bcdc_rxreorder;
- drvr->proto->add_if = brcmf_proto_bcdc_add_if;
-+ drvr->proto->del_if = brcmf_proto_bcdc_del_if;
- drvr->proto->pd = bcdc;
-
- drvr->hdrlen += BCDC_HEADER_LEN + BRCMF_PROT_FW_SIGNAL_MAX_TXBYTES;
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
-@@ -706,7 +706,7 @@ void brcmf_remove_interface(struct brcmf
- return;
- brcmf_dbg(TRACE, "Enter, bsscfgidx=%d, ifidx=%d\n", ifp->bsscfgidx,
- ifp->ifidx);
-- brcmf_fws_del_interface(ifp);
-+ brcmf_proto_del_if(ifp->drvr, ifp);
- brcmf_del_if(ifp->drvr, ifp->bsscfgidx, rtnl_locked);
- }
-
-@@ -1035,7 +1035,7 @@ fail:
- drvr->config = NULL;
- }
- if (drvr->fws) {
-- brcmf_fws_del_interface(ifp);
-+ brcmf_proto_del_if(ifp->drvr, ifp);
- brcmf_fws_deinit(drvr);
- }
- brcmf_net_detach(ifp->ndev, false);
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/proto.h
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/proto.h
-@@ -45,6 +45,7 @@ struct brcmf_proto {
- u8 peer[ETH_ALEN]);
- void (*rxreorder)(struct brcmf_if *ifp, struct sk_buff *skb);
- void (*add_if)(struct brcmf_if *ifp);
-+ void (*del_if)(struct brcmf_if *ifp);
- void *pd;
- };
-
-@@ -127,4 +128,12 @@ brcmf_proto_add_if(struct brcmf_pub *drv
- drvr->proto->add_if(ifp);
- }
-
-+static inline void
-+brcmf_proto_del_if(struct brcmf_pub *drvr, struct brcmf_if *ifp)
-+{
-+ if (!drvr->proto->del_if)
-+ return;
-+ drvr->proto->del_if(ifp);
-+}
-+
- #endif /* BRCMFMAC_PROTO_H */
diff --git a/package/kernel/mac80211/patches/323-0010-brcmfmac-wrap-brcmf_fws_reset_interface-into-bcdc-la.patch b/package/kernel/mac80211/patches/323-0010-brcmfmac-wrap-brcmf_fws_reset_interface-into-bcdc-la.patch
deleted file mode 100644
index 34e71d8f5c..0000000000
--- a/package/kernel/mac80211/patches/323-0010-brcmfmac-wrap-brcmf_fws_reset_interface-into-bcdc-la.patch
+++ /dev/null
@@ -1,82 +0,0 @@
-From 66ded1f8b33cdd9d6d3e20f5f8dd23615a110e70 Mon Sep 17 00:00:00 2001
-From: Franky Lin <franky.lin at broadcom.com>
-Date: Fri, 10 Mar 2017 21:17:06 +0000
-Subject: [PATCH] brcmfmac: wrap brcmf_fws_reset_interface into bcdc layer
-
-Create a new protocol interface function brcmf_proto_reset_if for core
-module to notify protocol layer when interface role changes.
-
-Signed-off-by: Franky Lin <franky.lin at broadcom.com>
-Signed-off-by: Arend van Spriel <arend.vanspriel at broadcom.com>
-Signed-off-by: Kalle Valo <kvalo at codeaurora.org>
----
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c | 7 +++++++
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c | 3 +--
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/proto.h | 9 +++++++++
- 3 files changed, 17 insertions(+), 2 deletions(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c
-@@ -411,6 +411,12 @@ brcmf_proto_bcdc_del_if(struct brcmf_if
- brcmf_fws_del_interface(ifp);
- }
-
-+static void
-+brcmf_proto_bcdc_reset_if(struct brcmf_if *ifp)
-+{
-+ brcmf_fws_reset_interface(ifp);
-+}
-+
- int brcmf_proto_bcdc_attach(struct brcmf_pub *drvr)
- {
- struct brcmf_bcdc *bcdc;
-@@ -436,6 +442,7 @@ int brcmf_proto_bcdc_attach(struct brcmf
- drvr->proto->rxreorder = brcmf_proto_bcdc_rxreorder;
- drvr->proto->add_if = brcmf_proto_bcdc_add_if;
- drvr->proto->del_if = brcmf_proto_bcdc_del_if;
-+ drvr->proto->reset_if = brcmf_proto_bcdc_reset_if;
- drvr->proto->pd = bcdc;
-
- drvr->hdrlen += BCDC_HEADER_LEN + BRCMF_PROT_FW_SIGNAL_MAX_TXBYTES;
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c
-@@ -22,7 +22,6 @@
- #include "core.h"
- #include "debug.h"
- #include "tracepoint.h"
--#include "fwsignal.h"
- #include "fweh.h"
- #include "fwil.h"
- #include "proto.h"
-@@ -180,7 +179,7 @@ static void brcmf_fweh_handle_if_event(s
- }
-
- if (ifp && ifevent->action == BRCMF_E_IF_CHANGE)
-- brcmf_fws_reset_interface(ifp);
-+ brcmf_proto_reset_if(drvr, ifp);
-
- err = brcmf_fweh_call_event_handler(ifp, emsg->event_code, emsg, data);
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/proto.h
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/proto.h
-@@ -46,6 +46,7 @@ struct brcmf_proto {
- void (*rxreorder)(struct brcmf_if *ifp, struct sk_buff *skb);
- void (*add_if)(struct brcmf_if *ifp);
- void (*del_if)(struct brcmf_if *ifp);
-+ void (*reset_if)(struct brcmf_if *ifp);
- void *pd;
- };
-
-@@ -136,4 +137,12 @@ brcmf_proto_del_if(struct brcmf_pub *drv
- drvr->proto->del_if(ifp);
- }
-
-+static inline void
-+brcmf_proto_reset_if(struct brcmf_pub *drvr, struct brcmf_if *ifp)
-+{
-+ if (!drvr->proto->reset_if)
-+ return;
-+ drvr->proto->reset_if(ifp);
-+}
-+
- #endif /* BRCMFMAC_PROTO_H */
diff --git a/package/kernel/mac80211/patches/325-mac80211-unconditionally-start-new-netdev-queues-wit.patch b/package/kernel/mac80211/patches/325-mac80211-unconditionally-start-new-netdev-queues-wit.patch
deleted file mode 100644
index ff7bbcb645..0000000000
--- a/package/kernel/mac80211/patches/325-mac80211-unconditionally-start-new-netdev-queues-wit.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From: Johannes Berg <johannes.berg at intel.com>
-Date: Wed, 29 Mar 2017 14:15:24 +0200
-Subject: [PATCH] mac80211: unconditionally start new netdev queues with iTXQ
- support
-
-When internal mac80211 TXQs aren't supported, netdev queues must
-always started out started even when driver queues are stopped
-while the interface is added. This is necessary because with the
-internal TXQ support netdev queues are never stopped and packet
-scheduling/dropping is done in mac80211.
-
-Cc: stable at vger.kernel.org # 4.9+
-Fixes: 80a83cfc434b1 ("mac80211: skip netdev queue control with software queuing")
-Reported-and-tested-by: Sven Eckelmann <sven.eckelmann at openmesh.com>
-Signed-off-by: Johannes Berg <johannes.berg at intel.com>
----
-
---- a/net/mac80211/iface.c
-+++ b/net/mac80211/iface.c
-@@ -727,7 +727,8 @@ int ieee80211_do_open(struct wireless_de
- ieee80211_recalc_ps(local);
-
- if (sdata->vif.type == NL80211_IFTYPE_MONITOR ||
-- sdata->vif.type == NL80211_IFTYPE_AP_VLAN) {
-+ sdata->vif.type == NL80211_IFTYPE_AP_VLAN ||
-+ local->ops->wake_tx_queue) {
- /* XXX: for AP_VLAN, actually track AP queues */
- netif_tx_start_all_queues(dev);
- } else if (dev) {
diff --git a/package/kernel/mac80211/patches/326-ath9k-fix-ar934x-OTP-offsets.patch b/package/kernel/mac80211/patches/326-ath9k-fix-ar934x-OTP-offsets.patch
deleted file mode 100644
index 60de2b6d14..0000000000
--- a/package/kernel/mac80211/patches/326-ath9k-fix-ar934x-OTP-offsets.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From: Christian Lamparter <chunkeey at googlemail.com>
-Date: Tue, 14 Feb 2017 20:10:30 +0100
-Subject: ath9k: use correct OTP register offsets for the AR9340 and AR9550
-
-This patch fixes the OTP register definitions for the AR934x and AR9550
-WMAC SoC.
-
-Previously, the ath9k driver was unable to initialize the integrated
-WMAC on an Aerohive AP121:
-
-| ath: phy0: timeout (1000 us) on reg 0x30018: 0xbadc0ffe & 0x00000007 != 0x00000004
-| ath: phy0: timeout (1000 us) on reg 0x30018: 0xbadc0ffe & 0x00000007 != 0x00000004
-| ath: phy0: Unable to initialize hardware; initialization status: -5
-| ath9k ar934x_wmac: failed to initialize device
-| ath9k: probe of ar934x_wmac failed with error -5
-
-It turns out that the AR9300_OTP_STATUS and AR9300_OTP_DATA
-definitions contain a typo.
-
-Fixes: add295a4afbdf5852d0 "ath9k: use correct OTP register offsets for AR9550"
-Signed-off-by: Christian Lamparter <chunkeey at googlemail.com>
-Signed-off-by: Chris Blake <chrisrblake93 at gmail.com>
----
-
---- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h
-+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h
-@@ -75,13 +75,13 @@
- #define AR9300_OTP_BASE \
- ((AR_SREV_9340(ah) || AR_SREV_9550(ah)) ? 0x30000 : 0x14000)
- #define AR9300_OTP_STATUS \
-- ((AR_SREV_9340(ah) || AR_SREV_9550(ah)) ? 0x30018 : 0x15f18)
-+ ((AR_SREV_9340(ah) || AR_SREV_9550(ah)) ? 0x31018 : 0x15f18)
- #define AR9300_OTP_STATUS_TYPE 0x7
- #define AR9300_OTP_STATUS_VALID 0x4
- #define AR9300_OTP_STATUS_ACCESS_BUSY 0x2
- #define AR9300_OTP_STATUS_SM_BUSY 0x1
- #define AR9300_OTP_READ_DATA \
-- ((AR_SREV_9340(ah) || AR_SREV_9550(ah)) ? 0x3001c : 0x15f1c)
-+ ((AR_SREV_9340(ah) || AR_SREV_9550(ah)) ? 0x3101c : 0x15f1c)
-
- enum targetPowerHTRates {
- HT_TARGET_RATE_0_8_16,
diff --git a/package/kernel/mac80211/patches/327-ath10k-increase-BMI-timeout.patch b/package/kernel/mac80211/patches/327-ath10k-increase-BMI-timeout.patch
deleted file mode 100644
index c9f493bcd8..0000000000
--- a/package/kernel/mac80211/patches/327-ath10k-increase-BMI-timeout.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From: Ben Greear <greearb at candelatech.com>
-Date: Wed, 31 May 2017 14:21:19 +0300
-Subject: [PATCH] ath10k: increase BMI timeout
-
-When testing a 9888 chipset NIC, I notice it often takes
-almost 2 seconds, and then many times OTP fails, probably due
-to the two-second timeout.
-
-[ 2269.841842] ath10k_pci 0000:05:00.0: bmi cmd took: 1984 jiffies (HZ: 1000), rv: 0
-[ 2273.608185] ath10k_pci 0000:05:00.0: bmi cmd took: 1986 jiffies (HZ: 1000), rv: 0
-[ 2277.294732] ath10k_pci 0000:05:00.0: bmi cmd took: 1989 jiffies (HZ: 1000), rv: 0
-
-So, increase the BMI timeout to 3 seconds.
-
-Signed-off-by: Ben Greear <greearb at candelatech.com>
-Signed-off-by: Kalle Valo <kvalo at qca.qualcomm.com>
----
-
---- a/drivers/net/wireless/ath/ath10k/bmi.h
-+++ b/drivers/net/wireless/ath/ath10k/bmi.h
-@@ -187,8 +187,8 @@ struct bmi_target_info {
- u32 type;
- };
-
--/* in msec */
--#define BMI_COMMUNICATION_TIMEOUT_HZ (2 * HZ)
-+/* in jiffies */
-+#define BMI_COMMUNICATION_TIMEOUT_HZ (3 * HZ)
-
- #define BMI_CE_NUM_TO_TARG 0
- #define BMI_CE_NUM_TO_HOST 1
diff --git a/package/kernel/mac80211/patches/328-ath10k-log-when-longer-bmi-cmds-happen.patch b/package/kernel/mac80211/patches/328-ath10k-log-when-longer-bmi-cmds-happen.patch
deleted file mode 100644
index 500f72ff98..0000000000
--- a/package/kernel/mac80211/patches/328-ath10k-log-when-longer-bmi-cmds-happen.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From: Ben Greear <greearb at candelatech.com>
-Date: Wed, 31 May 2017 14:21:21 +0300
-Subject: [PATCH] ath10k: log when longer bmi cmds happen
-
-This lets one have a clue that maybe timeouts are happening
-when we just aren't waiting long enough.
-
-Signed-off-by: Ben Greear <greearb at candelatech.com>
-Signed-off-by: Kalle Valo <kvalo at qca.qualcomm.com>
----
-
---- a/drivers/net/wireless/ath/ath10k/pci.c
-+++ b/drivers/net/wireless/ath/ath10k/pci.c
-@@ -101,7 +101,8 @@ static int ath10k_pci_init_irq(struct at
- static int ath10k_pci_deinit_irq(struct ath10k *ar);
- static int ath10k_pci_request_irq(struct ath10k *ar);
- static void ath10k_pci_free_irq(struct ath10k *ar);
--static int ath10k_pci_bmi_wait(struct ath10k_ce_pipe *tx_pipe,
-+static int ath10k_pci_bmi_wait(struct ath10k *ar,
-+ struct ath10k_ce_pipe *tx_pipe,
- struct ath10k_ce_pipe *rx_pipe,
- struct bmi_xfer *xfer);
- static int ath10k_pci_qca99x0_chip_reset(struct ath10k *ar);
-@@ -1843,7 +1844,7 @@ int ath10k_pci_hif_exchange_bmi_msg(stru
- if (ret)
- goto err_resp;
-
-- ret = ath10k_pci_bmi_wait(ce_tx, ce_rx, &xfer);
-+ ret = ath10k_pci_bmi_wait(ar, ce_tx, ce_rx, &xfer);
- if (ret) {
- u32 unused_buffer;
- unsigned int unused_nbytes;
-@@ -1910,23 +1911,37 @@ static void ath10k_pci_bmi_recv_data(str
- xfer->rx_done = true;
- }
-
--static int ath10k_pci_bmi_wait(struct ath10k_ce_pipe *tx_pipe,
-+static int ath10k_pci_bmi_wait(struct ath10k *ar,
-+ struct ath10k_ce_pipe *tx_pipe,
- struct ath10k_ce_pipe *rx_pipe,
- struct bmi_xfer *xfer)
- {
- unsigned long timeout = jiffies + BMI_COMMUNICATION_TIMEOUT_HZ;
-+ unsigned long started = jiffies;
-+ unsigned long dur;
-+ int ret;
-
- while (time_before_eq(jiffies, timeout)) {
- ath10k_pci_bmi_send_done(tx_pipe);
- ath10k_pci_bmi_recv_data(rx_pipe);
-
-- if (xfer->tx_done && (xfer->rx_done == xfer->wait_for_resp))
-- return 0;
-+ if (xfer->tx_done && (xfer->rx_done == xfer->wait_for_resp)) {
-+ ret = 0;
-+ goto out;
-+ }
-
- schedule();
- }
-
-- return -ETIMEDOUT;
-+ ret = -ETIMEDOUT;
-+
-+out:
-+ dur = jiffies - started;
-+ if (dur > HZ)
-+ ath10k_dbg(ar, ATH10K_DBG_BMI,
-+ "bmi cmd took %lu jiffies hz %d ret %d\n",
-+ dur, HZ, ret);
-+ return ret;
- }
-
- /*
diff --git a/package/kernel/mac80211/patches/329-ath10k-add-BMI-parameters-to-fix-calibration-from-DT.patch b/package/kernel/mac80211/patches/329-ath10k-add-BMI-parameters-to-fix-calibration-from-DT.patch
deleted file mode 100644
index 3fcf505e15..0000000000
--- a/package/kernel/mac80211/patches/329-ath10k-add-BMI-parameters-to-fix-calibration-from-DT.patch
+++ /dev/null
@@ -1,80 +0,0 @@
-From: Anilkumar Kolli <akolli at qti.qualcomm.com>
-Date: Wed, 31 May 2017 14:21:27 +0300
-Subject: [PATCH] ath10k: add BMI parameters to fix calibration from
- DT/pre-cal
-
-QCA99X0, QCA9888, QCA9984 supports calibration data in
-either OTP or DT/pre-cal file. Current ath10k supports
-Calibration data from OTP only.
-
-If caldata is loaded from DT/pre-cal file, fetching board id
-and applying calibration parameters like tx power gets failed.
-
-error log:
-[ 15.733663] ath10k_pci 0000:01:00.0: failed to fetch board file: -2
-[ 15.741474] ath10k_pci 0000:01:00.0: could not probe fw (-2)
-
-This patch adds calibration data support from DT/pre-cal
-file. Below parameters are used to get board id and
-applying calibration parameters from cal data.
-
- EEPROM[OTP] FLASH[DT/pre-cal file]
-Cal param 0x700 0x10000
-Board id 0x10 0x8000
-
-Tested on QCA9888 with pre-cal file.
-
-Signed-off-by: Anilkumar Kolli <akolli at qti.qualcomm.com>
-Signed-off-by: Kalle Valo <kvalo at qca.qualcomm.com>
----
-
---- a/drivers/net/wireless/ath/ath10k/bmi.h
-+++ b/drivers/net/wireless/ath/ath10k/bmi.h
-@@ -83,6 +83,8 @@ enum bmi_cmd_id {
- #define BMI_NVRAM_SEG_NAME_SZ 16
-
- #define BMI_PARAM_GET_EEPROM_BOARD_ID 0x10
-+#define BMI_PARAM_GET_FLASH_BOARD_ID 0x8000
-+#define BMI_PARAM_FLASH_SECTION_ALL 0x10000
-
- #define ATH10K_BMI_BOARD_ID_FROM_OTP_MASK 0x7c00
- #define ATH10K_BMI_BOARD_ID_FROM_OTP_LSB 10
---- a/drivers/net/wireless/ath/ath10k/core.c
-+++ b/drivers/net/wireless/ath/ath10k/core.c
-@@ -657,7 +657,7 @@ static int ath10k_core_get_board_id_from
- {
- u32 result, address;
- u8 board_id, chip_id;
-- int ret;
-+ int ret, bmi_board_id_param;
-
- address = ar->hw_params.patch_load_addr;
-
-@@ -681,8 +681,13 @@ static int ath10k_core_get_board_id_from
- return ret;
- }
-
-- ret = ath10k_bmi_execute(ar, address, BMI_PARAM_GET_EEPROM_BOARD_ID,
-- &result);
-+ if (ar->cal_mode == ATH10K_PRE_CAL_MODE_DT ||
-+ ar->cal_mode == ATH10K_PRE_CAL_MODE_FILE)
-+ bmi_board_id_param = BMI_PARAM_GET_FLASH_BOARD_ID;
-+ else
-+ bmi_board_id_param = BMI_PARAM_GET_EEPROM_BOARD_ID;
-+
-+ ret = ath10k_bmi_execute(ar, address, bmi_board_id_param, &result);
- if (ret) {
- ath10k_err(ar, "could not execute otp for board id check: %d\n",
- ret);
-@@ -810,6 +815,11 @@ static int ath10k_download_and_run_otp(s
- return ret;
- }
-
-+ /* As of now pre-cal is valid for 10_4 variants */
-+ if (ar->cal_mode == ATH10K_PRE_CAL_MODE_DT ||
-+ ar->cal_mode == ATH10K_PRE_CAL_MODE_FILE)
-+ bmi_otp_exe_param = BMI_PARAM_FLASH_SECTION_ALL;
-+
- ret = ath10k_bmi_execute(ar, address, bmi_otp_exe_param, &result);
- if (ret) {
- ath10k_err(ar, "could not execute otp (%d)\n", ret);
diff --git a/package/kernel/mac80211/patches/332-ath10k-Revert-disable-wake_tx_queue-for-older-devices.patch b/package/kernel/mac80211/patches/332-ath10k-Revert-disable-wake_tx_queue-for-older-devices.patch
index b4e7862264..f1bd131f3e 100644
--- a/package/kernel/mac80211/patches/332-ath10k-Revert-disable-wake_tx_queue-for-older-devices.patch
+++ b/package/kernel/mac80211/patches/332-ath10k-Revert-disable-wake_tx_queue-for-older-devices.patch
@@ -9,7 +9,7 @@ in the hope that we've fixed all the performance problems now.
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
-@@ -8219,15 +8219,6 @@ int ath10k_mac_register(struct ath10k *a
+@@ -8286,15 +8286,6 @@ int ath10k_mac_register(struct ath10k *a
ath10k_warn(ar, "failed to initialise DFS pattern detector\n");
}
diff --git a/package/kernel/mac80211/patches/402-ath_regd_optional.patch b/package/kernel/mac80211/patches/402-ath_regd_optional.patch
index c8ede7f583..fae9b55529 100644
--- a/package/kernel/mac80211/patches/402-ath_regd_optional.patch
+++ b/package/kernel/mac80211/patches/402-ath_regd_optional.patch
@@ -27,7 +27,7 @@
if (!IS_ENABLED(CPTCFG_ATH_REG_DYNAMIC_USER_REG_HINTS))
return false;
if (!dynamic_country_user_possible(reg))
-@@ -341,6 +347,9 @@ ath_reg_apply_beaconing_flags(struct wip
+@@ -345,6 +351,9 @@ ath_reg_apply_beaconing_flags(struct wip
struct ieee80211_channel *ch;
unsigned int i;
@@ -37,7 +37,7 @@
for (band = 0; band < NUM_NL80211_BANDS; band++) {
if (!wiphy->bands[band])
continue;
-@@ -374,6 +383,9 @@ ath_reg_apply_ir_flags(struct wiphy *wip
+@@ -378,6 +387,9 @@ ath_reg_apply_ir_flags(struct wiphy *wip
{
struct ieee80211_supported_band *sband;
@@ -47,7 +47,7 @@
sband = wiphy->bands[NL80211_BAND_2GHZ];
if (!sband)
return;
-@@ -402,6 +414,9 @@ static void ath_reg_apply_radar_flags(st
+@@ -407,6 +419,9 @@ static void ath_reg_apply_radar_flags(st
struct ieee80211_channel *ch;
unsigned int i;
@@ -57,7 +57,7 @@
if (!wiphy->bands[NL80211_BAND_5GHZ])
return;
-@@ -539,6 +554,11 @@ void ath_reg_notifier_apply(struct wiphy
+@@ -544,6 +559,11 @@ void ath_reg_notifier_apply(struct wiphy
ath_reg_dyn_country(wiphy, reg, request);
break;
}
@@ -69,7 +69,7 @@
}
EXPORT_SYMBOL(ath_reg_notifier_apply);
-@@ -634,6 +654,10 @@ ath_regd_init_wiphy(struct ath_regulator
+@@ -639,6 +659,10 @@ ath_regd_init_wiphy(struct ath_regulator
const struct ieee80211_regdomain *regd;
wiphy->reg_notifier = reg_notifier;
@@ -80,7 +80,7 @@
wiphy->regulatory_flags |= REGULATORY_STRICT_REG |
REGULATORY_CUSTOM_REG;
-@@ -762,10 +786,7 @@ ath_regd_init(struct ath_regulatory *reg
+@@ -767,10 +791,7 @@ ath_regd_init(struct ath_regulatory *reg
if (r)
return r;
@@ -104,9 +104,9 @@
config ATH_DEBUG
bool "Atheros wireless debugging"
---help---
---- a/.local-symbols
-+++ b/.local-symbols
-@@ -130,6 +130,7 @@ ADM8211=
+--- a/local-symbols
++++ b/local-symbols
+@@ -82,6 +82,7 @@ ADM8211=
ATH_COMMON=
WLAN_VENDOR_ATH=
ATH_DEBUG=
diff --git a/package/kernel/mac80211/patches/404-regd_no_assoc_hints.patch b/package/kernel/mac80211/patches/404-regd_no_assoc_hints.patch
index 469da90160..457c0cb28c 100644
--- a/package/kernel/mac80211/patches/404-regd_no_assoc_hints.patch
+++ b/package/kernel/mac80211/patches/404-regd_no_assoc_hints.patch
@@ -1,6 +1,6 @@
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
-@@ -2398,6 +2398,8 @@ void regulatory_hint_country_ie(struct w
+@@ -2497,6 +2497,8 @@ void regulatory_hint_country_ie(struct w
enum environment_cap env = ENVIRON_ANY;
struct regulatory_request *request = NULL, *lr;
@@ -9,7 +9,7 @@
/* IE len must be evenly divisible by 2 */
if (country_ie_len & 0x01)
return;
-@@ -2604,6 +2606,7 @@ static void restore_regulatory_settings(
+@@ -2703,6 +2705,7 @@ static void restore_regulatory_settings(
void regulatory_hint_disconnect(void)
{
diff --git a/package/kernel/mac80211/patches/406-ath_relax_default_regd.patch b/package/kernel/mac80211/patches/406-ath_relax_default_regd.patch
index 35b0f2b76e..44e8f3281c 100644
--- a/package/kernel/mac80211/patches/406-ath_relax_default_regd.patch
+++ b/package/kernel/mac80211/patches/406-ath_relax_default_regd.patch
@@ -39,7 +39,7 @@
bool ath_is_world_regd(struct ath_regulatory *reg)
{
return is_wwr_sku(ath_regd_get_eepromRD(reg));
-@@ -658,6 +666,9 @@ ath_regd_init_wiphy(struct ath_regulator
+@@ -663,6 +671,9 @@ ath_regd_init_wiphy(struct ath_regulator
if (IS_ENABLED(CPTCFG_ATH_USER_REGD))
return 0;
diff --git a/package/kernel/mac80211/patches/440-ath5k_channel_bw_debugfs.patch b/package/kernel/mac80211/patches/440-ath5k_channel_bw_debugfs.patch
index 1d249a9723..3ae01a5c35 100644
--- a/package/kernel/mac80211/patches/440-ath5k_channel_bw_debugfs.patch
+++ b/package/kernel/mac80211/patches/440-ath5k_channel_bw_debugfs.patch
@@ -109,7 +109,7 @@ drivers/net/wireless/ath/ath5k/debug.c | 86 ++++++++++++++++++++++++++++++++
/* debugfs: queues etc */
-@@ -1009,6 +1100,9 @@ ath5k_debug_init_device(struct ath5k_hw
+@@ -1012,6 +1103,9 @@ ath5k_debug_init_device(struct ath5k_hw
debugfs_create_file("beacon", S_IWUSR | S_IRUSR, phydir, ah,
&fops_beacon);
diff --git a/package/kernel/mac80211/patches/500-ath9k_eeprom_debugfs.patch b/package/kernel/mac80211/patches/500-ath9k_eeprom_debugfs.patch
index f21eed18c3..b6dc45cd96 100644
--- a/package/kernel/mac80211/patches/500-ath9k_eeprom_debugfs.patch
+++ b/package/kernel/mac80211/patches/500-ath9k_eeprom_debugfs.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
-@@ -1315,6 +1315,53 @@ void ath9k_deinit_debug(struct ath_softc
+@@ -1374,6 +1374,53 @@ void ath9k_deinit_debug(struct ath_softc
ath9k_cmn_spectral_deinit_debug(&sc->spec_priv);
}
@@ -54,7 +54,7 @@
int ath9k_init_debug(struct ath_hw *ah)
{
struct ath_common *common = ath9k_hw_common(ah);
-@@ -1334,6 +1381,8 @@ int ath9k_init_debug(struct ath_hw *ah)
+@@ -1393,6 +1440,8 @@ int ath9k_init_debug(struct ath_hw *ah)
ath9k_tx99_init_debug(sc);
ath9k_cmn_spectral_init_debug(&sc->spec_priv, sc->debug.debugfs_phy);
diff --git a/package/kernel/mac80211/patches/501-ath9k_ahb_init.patch b/package/kernel/mac80211/patches/501-ath9k_ahb_init.patch
index d076e3c2eb..53225dbc36 100644
--- a/package/kernel/mac80211/patches/501-ath9k_ahb_init.patch
+++ b/package/kernel/mac80211/patches/501-ath9k_ahb_init.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
-@@ -1086,23 +1086,23 @@ static int __init ath9k_init(void)
+@@ -1088,23 +1088,23 @@ static int __init ath9k_init(void)
{
int error;
diff --git a/package/kernel/mac80211/patches/512-ath9k_channelbw_debugfs.patch b/package/kernel/mac80211/patches/512-ath9k_channelbw_debugfs.patch
index c98072bac9..2ebb73d689 100644
--- a/package/kernel/mac80211/patches/512-ath9k_channelbw_debugfs.patch
+++ b/package/kernel/mac80211/patches/512-ath9k_channelbw_debugfs.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
-@@ -1362,6 +1362,52 @@ static const struct file_operations fops
+@@ -1421,6 +1421,52 @@ static const struct file_operations fops
.owner = THIS_MODULE
};
@@ -53,7 +53,7 @@
int ath9k_init_debug(struct ath_hw *ah)
{
struct ath_common *common = ath9k_hw_common(ah);
-@@ -1383,6 +1429,8 @@ int ath9k_init_debug(struct ath_hw *ah)
+@@ -1442,6 +1488,8 @@ int ath9k_init_debug(struct ath_hw *ah)
debugfs_create_file("eeprom", S_IRUSR, sc->debug.debugfs_phy, sc,
&fops_eeprom);
@@ -74,7 +74,7 @@
--- a/drivers/net/wireless/ath/ath9k/common.c
+++ b/drivers/net/wireless/ath/ath9k/common.c
-@@ -296,11 +296,13 @@ EXPORT_SYMBOL(ath9k_cmn_get_hw_crypto_ke
+@@ -297,11 +297,13 @@ EXPORT_SYMBOL(ath9k_cmn_get_hw_crypto_ke
/*
* Update internal channel flags.
*/
@@ -89,7 +89,7 @@
ichan->channel = chan->center_freq;
ichan->chan = chan;
-@@ -308,7 +310,19 @@ static void ath9k_cmn_update_ichannel(st
+@@ -309,7 +311,19 @@ static void ath9k_cmn_update_ichannel(st
if (chan->band == NL80211_BAND_5GHZ)
flags |= CHANNEL_5GHZ;
@@ -110,7 +110,7 @@
case NL80211_CHAN_WIDTH_5:
flags |= CHANNEL_QUARTER;
break;
-@@ -341,10 +355,11 @@ struct ath9k_channel *ath9k_cmn_get_chan
+@@ -342,10 +356,11 @@ struct ath9k_channel *ath9k_cmn_get_chan
struct cfg80211_chan_def *chandef)
{
struct ieee80211_channel *curchan = chandef->chan;
diff --git a/package/kernel/mac80211/patches/513-ath9k_add_pci_ids.patch b/package/kernel/mac80211/patches/513-ath9k_add_pci_ids.patch
index 59daf4fe11..fdeaed05e8 100644
--- a/package/kernel/mac80211/patches/513-ath9k_add_pci_ids.patch
+++ b/package/kernel/mac80211/patches/513-ath9k_add_pci_ids.patch
@@ -20,7 +20,7 @@
#define AR9160_DEVID_PCI 0x0027
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
-@@ -763,6 +763,7 @@ static const struct pci_device_id ath_pc
+@@ -773,6 +773,7 @@ static const struct pci_device_id ath_pc
.driver_data = ATH9K_PCI_BT_ANT_DIV },
#endif
diff --git a/package/kernel/mac80211/patches/522-mac80211_configure_antenna_gain.patch b/package/kernel/mac80211/patches/522-mac80211_configure_antenna_gain.patch
index 9a0f6f5dbd..01de325b92 100644
--- a/package/kernel/mac80211/patches/522-mac80211_configure_antenna_gain.patch
+++ b/package/kernel/mac80211/patches/522-mac80211_configure_antenna_gain.patch
@@ -1,6 +1,6 @@
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
-@@ -2660,6 +2660,7 @@ struct cfg80211_nan_func {
+@@ -2750,6 +2750,7 @@ struct cfg80211_pmk_conf {
* (as advertised by the nl80211 feature flag.)
* @get_tx_power: store the current TX power into the dbm variable;
* return 0 if successful
@@ -8,7 +8,7 @@
*
* @set_wds_peer: set the WDS peer for a WDS interface
*
-@@ -2940,6 +2941,7 @@ struct cfg80211_ops {
+@@ -3041,6 +3042,7 @@ struct cfg80211_ops {
enum nl80211_tx_power_setting type, int mbm);
int (*get_tx_power)(struct wiphy *wiphy, struct wireless_dev *wdev,
int *dbm);
@@ -18,7 +18,7 @@
const u8 *addr);
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
-@@ -1325,6 +1325,7 @@ enum ieee80211_smps_mode {
+@@ -1338,6 +1338,7 @@ enum ieee80211_smps_mode {
*
* @power_level: requested transmit power (in dBm), backward compatibility
* value only that is set to the minimum of all interfaces
@@ -26,7 +26,7 @@
*
* @chandef: the channel definition to tune to
* @radar_enabled: whether radar detection is enabled
-@@ -1345,6 +1346,7 @@ enum ieee80211_smps_mode {
+@@ -1358,6 +1359,7 @@ enum ieee80211_smps_mode {
struct ieee80211_conf {
u32 flags;
int power_level, dynamic_ps_timeout;
@@ -36,9 +36,9 @@
u8 ps_dtim_period;
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
-@@ -2002,6 +2002,9 @@ enum nl80211_commands {
- * u32 attribute with an &enum nl80211_timeout_reason value. This is used,
- * e.g., with %NL80211_CMD_CONNECT event.
+@@ -2139,6 +2139,9 @@ enum nl80211_commands {
+ * the driver or is not needed (because roaming used the Fast Transition
+ * protocol).
*
+ * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce
+ * transmit power to stay within regulatory limits. u32, dBi.
@@ -46,9 +46,9 @@
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
-@@ -2413,6 +2416,8 @@ enum nl80211_attrs {
-
- NL80211_ATTR_TIMEOUT_REASON,
+@@ -2565,6 +2568,8 @@ enum nl80211_attrs {
+ NL80211_ATTR_PMKR0_NAME,
+ NL80211_ATTR_PORT_AUTHORIZED,
+ NL80211_ATTR_WIPHY_ANTENNA_GAIN,
+
@@ -57,7 +57,7 @@
__NL80211_ATTR_AFTER_LAST,
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
-@@ -2396,6 +2396,19 @@ static int ieee80211_get_tx_power(struct
+@@ -2444,6 +2444,19 @@ static int ieee80211_get_tx_power(struct
return 0;
}
@@ -77,7 +77,7 @@
static int ieee80211_set_wds_peer(struct wiphy *wiphy, struct net_device *dev,
const u8 *addr)
{
-@@ -3627,6 +3640,7 @@ const struct cfg80211_ops mac80211_confi
+@@ -3717,6 +3730,7 @@ const struct cfg80211_ops mac80211_confi
.set_wiphy_params = ieee80211_set_wiphy_params,
.set_tx_power = ieee80211_set_tx_power,
.get_tx_power = ieee80211_get_tx_power,
@@ -87,7 +87,7 @@
CFG80211_TESTMODE_CMD(ieee80211_testmode_cmd)
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
-@@ -1370,6 +1370,7 @@ struct ieee80211_local {
+@@ -1347,6 +1347,7 @@ struct ieee80211_local {
int dynamic_ps_forced_timeout;
int user_power_level; /* in dBm, for all interfaces */
@@ -119,7 +119,7 @@
if (local->hw.conf.power_level != power) {
changed |= IEEE80211_CONF_CHANGE_POWER;
local->hw.conf.power_level = power;
-@@ -589,6 +595,7 @@ struct ieee80211_hw *ieee80211_alloc_hw_
+@@ -592,6 +598,7 @@ struct ieee80211_hw *ieee80211_alloc_hw_
IEEE80211_RADIOTAP_MCS_HAVE_BW;
local->hw.radiotap_vht_details = IEEE80211_RADIOTAP_VHT_KNOWN_GI |
IEEE80211_RADIOTAP_VHT_KNOWN_BANDWIDTH;
@@ -129,15 +129,15 @@
local->user_power_level = IEEE80211_UNSET_POWER_LEVEL;
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
-@@ -424,6 +424,7 @@ static const struct nla_policy nl80211_p
- .len = sizeof(struct nl80211_bss_select_rssi_adjust)
- },
- [NL80211_ATTR_TIMEOUT_REASON] = { .type = NLA_U32 },
+@@ -420,6 +420,7 @@ static const struct nla_policy nl80211_p
+ [NL80211_ATTR_FILS_CACHE_ID] = { .len = 2 },
+ [NL80211_ATTR_PMK] = { .type = NLA_BINARY, .len = PMK_MAX_LEN },
+ [NL80211_ATTR_SCHED_SCAN_MULTI] = { .type = NLA_FLAG },
+ [NL80211_ATTR_WIPHY_ANTENNA_GAIN] = { .type = NLA_U32 },
};
/* policy for the key attributes */
-@@ -2385,6 +2386,20 @@ static int nl80211_set_wiphy(struct sk_b
+@@ -2378,6 +2379,20 @@ static int nl80211_set_wiphy(struct sk_b
if (result)
return result;
}
diff --git a/package/kernel/mac80211/patches/530-ath9k_extra_leds.patch b/package/kernel/mac80211/patches/530-ath9k_extra_leds.patch
index b3b51b4433..8ea2f79a20 100644
--- a/package/kernel/mac80211/patches/530-ath9k_extra_leds.patch
+++ b/package/kernel/mac80211/patches/530-ath9k_extra_leds.patch
@@ -181,7 +181,7 @@
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
-@@ -998,7 +998,7 @@ int ath9k_init_device(u16 devid, struct
+@@ -1000,7 +1000,7 @@ int ath9k_init_device(u16 devid, struct
#ifdef CPTCFG_MAC80211_LEDS
/* must be initialized before ieee80211_register_hw */
@@ -192,7 +192,7 @@
#endif
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
-@@ -1407,6 +1407,61 @@ static const struct file_operations fops
+@@ -1466,6 +1466,61 @@ static const struct file_operations fops
.llseek = default_llseek,
};
@@ -254,7 +254,7 @@
int ath9k_init_debug(struct ath_hw *ah)
{
-@@ -1431,6 +1486,10 @@ int ath9k_init_debug(struct ath_hw *ah)
+@@ -1490,6 +1545,10 @@ int ath9k_init_debug(struct ath_hw *ah)
&fops_eeprom);
debugfs_create_file("chanbw", S_IRUSR | S_IWUSR, sc->debug.debugfs_phy,
sc, &fops_chanbw);
diff --git a/package/kernel/mac80211/patches/542-ath9k_debugfs_diag.patch b/package/kernel/mac80211/patches/542-ath9k_debugfs_diag.patch
index 3e687792da..7cf589485e 100644
--- a/package/kernel/mac80211/patches/542-ath9k_debugfs_diag.patch
+++ b/package/kernel/mac80211/patches/542-ath9k_debugfs_diag.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
-@@ -1463,6 +1463,50 @@ static const struct file_operations fops
+@@ -1522,6 +1522,50 @@ static const struct file_operations fops
#endif
@@ -51,7 +51,7 @@
int ath9k_init_debug(struct ath_hw *ah)
{
struct ath_common *common = ath9k_hw_common(ah);
-@@ -1490,6 +1534,8 @@ int ath9k_init_debug(struct ath_hw *ah)
+@@ -1549,6 +1593,8 @@ int ath9k_init_debug(struct ath_hw *ah)
debugfs_create_file("gpio_led", S_IWUSR,
sc->debug.debugfs_phy, sc, &fops_gpio_led);
#endif
@@ -75,16 +75,16 @@
struct ath9k_hw_version {
u32 magic;
u16 devid;
-@@ -805,6 +811,8 @@ struct ath_hw {
- u32 rfkill_polarity;
+@@ -806,6 +812,8 @@ struct ath_hw {
u32 ah_flags;
+ s16 nf_override;
+ unsigned long diag;
+
bool reset_power_on;
bool htc_reset_init;
-@@ -1067,6 +1075,7 @@ void ath9k_hw_check_nav(struct ath_hw *a
+@@ -1068,6 +1076,7 @@ void ath9k_hw_check_nav(struct ath_hw *a
bool ath9k_hw_check_alive(struct ath_hw *ah);
bool ath9k_hw_setpower(struct ath_hw *ah, enum ath9k_power_mode mode);
diff --git a/package/kernel/mac80211/patches/543-ath9k_entropy_from_adc.patch b/package/kernel/mac80211/patches/543-ath9k_entropy_from_adc.patch
index 6f7370203b..f9d3251c22 100644
--- a/package/kernel/mac80211/patches/543-ath9k_entropy_from_adc.patch
+++ b/package/kernel/mac80211/patches/543-ath9k_entropy_from_adc.patch
@@ -18,7 +18,7 @@
void (*spectral_scan_trigger)(struct ath_hw *ah);
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
-@@ -1947,6 +1947,26 @@ void ar9003_hw_init_rate_txpower(struct
+@@ -1945,6 +1945,26 @@ void ar9003_hw_init_rate_txpower(struct
}
}
@@ -45,7 +45,7 @@
void ar9003_hw_attach_phy_ops(struct ath_hw *ah)
{
struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah);
-@@ -1983,6 +2003,7 @@ void ar9003_hw_attach_phy_ops(struct ath
+@@ -1981,6 +2001,7 @@ void ar9003_hw_attach_phy_ops(struct ath
priv_ops->set_radar_params = ar9003_hw_set_radar_params;
priv_ops->fast_chan_change = ar9003_hw_fast_chan_change;
@@ -65,8 +65,8 @@
}
static const struct ieee80211_iface_limit if_limits[] = {
-@@ -958,6 +959,18 @@ static void ath9k_set_hw_capab(struct at
- SET_IEEE80211_PERM_ADDR(hw, common->macaddr);
+@@ -960,6 +961,18 @@ static void ath9k_set_hw_capab(struct at
+ wiphy_ext_feature_set(hw->wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST);
}
+static void ath_get_initial_entropy(struct ath_softc *sc)
@@ -84,7 +84,7 @@
int ath9k_init_device(u16 devid, struct ath_softc *sc,
const struct ath_bus_ops *bus_ops)
{
-@@ -1003,6 +1016,8 @@ int ath9k_init_device(u16 devid, struct
+@@ -1005,6 +1018,8 @@ int ath9k_init_device(u16 devid, struct
ARRAY_SIZE(ath9k_tpt_blink));
#endif
diff --git a/package/kernel/mac80211/patches/551-ath9k_ubnt_uap_plus_hsr.patch b/package/kernel/mac80211/patches/551-ath9k_ubnt_uap_plus_hsr.patch
index bcb0026a69..6d541d6a57 100644
--- a/package/kernel/mac80211/patches/551-ath9k_ubnt_uap_plus_hsr.patch
+++ b/package/kernel/mac80211/patches/551-ath9k_ubnt_uap_plus_hsr.patch
@@ -384,9 +384,9 @@
};
#endif /* _LINUX_ATH9K_PLATFORM_H */
---- a/.local-symbols
-+++ b/.local-symbols
-@@ -157,6 +157,7 @@ ATH9K_WOW=
+--- a/local-symbols
++++ b/local-symbols
+@@ -109,6 +109,7 @@ ATH9K_WOW=
ATH9K_RFKILL=
ATH9K_CHANNEL_CONTEXT=
ATH9K_PCOEM=
diff --git a/package/kernel/mac80211/patches/600-02-rt2x00-rt2800lib-enable-support-for-RT3883.patch b/package/kernel/mac80211/patches/600-02-rt2x00-rt2800lib-enable-support-for-RT3883.patch
index dc0f19490e..5127c5cfe4 100644
--- a/package/kernel/mac80211/patches/600-02-rt2x00-rt2800lib-enable-support-for-RT3883.patch
+++ b/package/kernel/mac80211/patches/600-02-rt2x00-rt2800lib-enable-support-for-RT3883.patch
@@ -10,7 +10,7 @@ Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -9397,6 +9397,7 @@ static int rt2800_probe_rt(struct rt2x00
+@@ -9403,6 +9403,7 @@ static int rt2800_probe_rt(struct rt2x00
case RT3390:
case RT3572:
case RT3593:
diff --git a/package/kernel/mac80211/patches/600-03-rt2x00-rt2800lib-add-rf_vals-for-RF3853.patch b/package/kernel/mac80211/patches/600-03-rt2x00-rt2800lib-add-rf_vals-for-RF3853.patch
index 45fc964504..60e57c1bae 100644
--- a/package/kernel/mac80211/patches/600-03-rt2x00-rt2800lib-add-rf_vals-for-RF3853.patch
+++ b/package/kernel/mac80211/patches/600-03-rt2x00-rt2800lib-add-rf_vals-for-RF3853.patch
@@ -31,7 +31,7 @@ Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
#define RF5362 0x5362
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -8975,6 +8975,66 @@ static const struct rf_channel rf_vals_3
+@@ -8981,6 +8981,66 @@ static const struct rf_channel rf_vals_3
{14, 0xF0, 2, 0x18},
};
@@ -98,7 +98,7 @@ Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
static const struct rf_channel rf_vals_5592_xtal20[] = {
/* Channel, N, K, mod, R */
{1, 482, 4, 10, 3},
-@@ -9238,6 +9298,11 @@ static int rt2800_probe_hw_mode(struct r
+@@ -9244,6 +9304,11 @@ static int rt2800_probe_hw_mode(struct r
spec->channels = rf_vals_3x;
break;
@@ -108,5 +108,5 @@ Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
+ break;
+
case RF5592:
- rt2800_register_read(rt2x00dev, MAC_DEBUG_INDEX, ®);
+ reg = rt2800_register_read(rt2x00dev, MAC_DEBUG_INDEX);
if (rt2x00_get_field32(reg, MAC_DEBUG_INDEX_XTAL)) {
diff --git a/package/kernel/mac80211/patches/600-04-rt2x00-rt2800lib-enable-VCO-calibration-for-RF3853.patch b/package/kernel/mac80211/patches/600-04-rt2x00-rt2800lib-enable-VCO-calibration-for-RF3853.patch
index fb32b75d0a..def2c397fd 100644
--- a/package/kernel/mac80211/patches/600-04-rt2x00-rt2800lib-enable-VCO-calibration-for-RF3853.patch
+++ b/package/kernel/mac80211/patches/600-04-rt2x00-rt2800lib-enable-VCO-calibration-for-RF3853.patch
@@ -10,7 +10,7 @@ Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -4871,6 +4871,7 @@ void rt2800_vco_calibration(struct rt2x0
+@@ -4881,6 +4881,7 @@ void rt2800_vco_calibration(struct rt2x0
case RF3053:
case RF3070:
case RF3290:
@@ -18,7 +18,7 @@ Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
case RF5350:
case RF5360:
case RF5362:
-@@ -9420,6 +9421,7 @@ static int rt2800_probe_hw_mode(struct r
+@@ -9426,6 +9427,7 @@ static int rt2800_probe_hw_mode(struct r
case RF3053:
case RF3070:
case RF3290:
diff --git a/package/kernel/mac80211/patches/600-05-rt2x00-rt2800lib-add-channel-configuration-function-.patch b/package/kernel/mac80211/patches/600-05-rt2x00-rt2800lib-add-channel-configuration-function-.patch
index 266a3fba50..1d6e312037 100644
--- a/package/kernel/mac80211/patches/600-05-rt2x00-rt2800lib-add-channel-configuration-function-.patch
+++ b/package/kernel/mac80211/patches/600-05-rt2x00-rt2800lib-add-channel-configuration-function-.patch
@@ -11,7 +11,7 @@ Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -2709,6 +2709,211 @@ static void rt2800_config_channel_rf3053
+@@ -2713,6 +2713,211 @@ static void rt2800_config_channel_rf3053
}
}
@@ -50,7 +50,7 @@ Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
+
+ rt2800_rfcsr_write(rt2x00dev, 13, 0x12);
+
-+ rt2800_rfcsr_read(rt2x00dev, 1, &rfcsr);
++ rfcsr = rt2800_rfcsr_read(rt2x00dev, 1);
+ rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 0);
+ rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 0);
+ rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 0);
@@ -87,7 +87,7 @@ Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
+
+ rt2800_freq_cal_mode1(rt2x00dev);
+
-+ rt2800_rfcsr_read(rt2x00dev, 30, &rfcsr);
++ rfcsr = rt2800_rfcsr_read(rt2x00dev, 30);
+ if (!conf_is_ht40(conf))
+ rfcsr &= ~(0x06);
+ else
@@ -110,7 +110,7 @@ Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
+ rt2800_rfcsr_write(rt2x00dev, 34, 0x20);
+
+ /* loopback RF_BS */
-+ rt2800_rfcsr_read(rt2x00dev, 36, &rfcsr);
++ rfcsr = rt2800_rfcsr_read(rt2x00dev, 36);
+ if (rf->channel <= 14)
+ rt2x00_set_field8(&rfcsr, RFCSR36_RF_BS, 1);
+ else
@@ -158,13 +158,13 @@ Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
+
+ rt2800_rfcsr_write(rt2x00dev, 50, 0x86);
+
-+ rt2800_rfcsr_read(rt2x00dev, 51, &rfcsr);
++ rfcsr = rt2800_rfcsr_read(rt2x00dev, 51);
+ if (rf->channel <= 14)
+ rt2800_rfcsr_write(rt2x00dev, 51, 0x75);
+ else
+ rt2800_rfcsr_write(rt2x00dev, 51, 0x51);
+
-+ rt2800_rfcsr_read(rt2x00dev, 52, &rfcsr);
++ rfcsr = rt2800_rfcsr_read(rt2x00dev, 52);
+ if (rf->channel <= 14)
+ rt2800_rfcsr_write(rt2x00dev, 52, 0x45);
+ else
@@ -194,25 +194,25 @@ Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
+ ((info->default_power2 & 0xe0) >> 1);
+ rt2800_bbp_write(rt2x00dev, 109, bbp);
+
-+ rt2800_bbp_read(rt2x00dev, 110, &bbp);
++ bbp = rt2800_bbp_read(rt2x00dev, 110);
+ bbp &= 0x0f;
+ bbp |= (info->default_power3 & 0xe0) >> 1;
+ rt2800_bbp_write(rt2x00dev, 110, bbp);
+
-+ rt2800_rfcsr_read(rt2x00dev, 57, &rfcsr);
++ rfcsr = rt2800_rfcsr_read(rt2x00dev, 57);
+ if (rf->channel <= 14)
+ rt2800_rfcsr_write(rt2x00dev, 57, 0x6e);
+ else
+ rt2800_rfcsr_write(rt2x00dev, 57, 0x3e);
+
+ /* Enable RF tuning */
-+ rt2800_rfcsr_read(rt2x00dev, 3, &rfcsr);
++ rfcsr = rt2800_rfcsr_read(rt2x00dev, 3);
+ rt2x00_set_field8(&rfcsr, RFCSR3_VCOCAL_EN, 1);
+ rt2800_rfcsr_write(rt2x00dev, 3, rfcsr);
+
+ udelay(2000);
+
-+ rt2800_bbp_read(rt2x00dev, 49, &bbp);
++ bbp = rt2800_bbp_read(rt2x00dev, 49);
+ /* clear update flag */
+ rt2800_bbp_write(rt2x00dev, 49, bbp & 0xfe);
+ rt2800_bbp_write(rt2x00dev, 49, bbp);
@@ -223,7 +223,7 @@ Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
#define POWER_BOUND 0x27
#define POWER_BOUND_5G 0x2b
-@@ -3567,6 +3772,9 @@ static void rt2800_config_channel(struct
+@@ -3570,6 +3775,9 @@ static void rt2800_config_channel(struct
case RF3322:
rt2800_config_channel_rf3322(rt2x00dev, conf, rf, info);
break;
diff --git a/package/kernel/mac80211/patches/600-06-rt2x00-rt2800lib-enable-RF3853-support.patch b/package/kernel/mac80211/patches/600-06-rt2x00-rt2800lib-enable-RF3853-support.patch
index 53e6bbb155..6476dc107b 100644
--- a/package/kernel/mac80211/patches/600-06-rt2x00-rt2800lib-enable-RF3853-support.patch
+++ b/package/kernel/mac80211/patches/600-06-rt2x00-rt2800lib-enable-RF3853-support.patch
@@ -10,7 +10,7 @@ Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -8900,6 +8900,7 @@ static int rt2800_init_eeprom(struct rt2
+@@ -8906,6 +8906,7 @@ static int rt2800_init_eeprom(struct rt2
case RF3290:
case RF3320:
case RF3322:
diff --git a/package/kernel/mac80211/patches/600-07-rt2x00-rt2800lib-add-MAC-register-initialization-for.patch b/package/kernel/mac80211/patches/600-07-rt2x00-rt2800lib-add-MAC-register-initialization-for.patch
index cfa95e56bc..0a931e2026 100644
--- a/package/kernel/mac80211/patches/600-07-rt2x00-rt2800lib-add-MAC-register-initialization-for.patch
+++ b/package/kernel/mac80211/patches/600-07-rt2x00-rt2800lib-add-MAC-register-initialization-for.patch
@@ -35,7 +35,7 @@ Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
#define RX_FILTER_CFG 0x1400
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -5501,6 +5501,12 @@ static int rt2800_init_registers(struct
+@@ -5509,6 +5509,12 @@ static int rt2800_init_registers(struct
rt2800_register_write(rt2x00dev, TX_SW_CFG2,
0x00000000);
}
@@ -48,7 +48,7 @@ Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
} else if (rt2x00_rt(rt2x00dev, RT5390) ||
rt2x00_rt(rt2x00dev, RT5392) ||
rt2x00_rt(rt2x00dev, RT6352)) {
-@@ -5714,6 +5720,11 @@ static int rt2800_init_registers(struct
+@@ -5722,6 +5728,11 @@ static int rt2800_init_registers(struct
reg = rt2x00_rt(rt2x00dev, RT5592) ? 0x00000082 : 0x00000002;
rt2800_register_write(rt2x00dev, TXOP_HLDR_ET, reg);
@@ -57,6 +57,6 @@ Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
+ rt2800_register_write(rt2x00dev, TX_FBK_CFG_3S_1, 0x16151413);
+ }
+
- rt2800_register_read(rt2x00dev, TX_RTS_CFG, ®);
+ reg = rt2800_register_read(rt2x00dev, TX_RTS_CFG);
rt2x00_set_field32(®, TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT, 7);
rt2x00_set_field32(®, TX_RTS_CFG_RTS_THRES,
diff --git a/package/kernel/mac80211/patches/600-09-rt2x00-rt2800lib-add-BBP-register-initialization-for.patch b/package/kernel/mac80211/patches/600-09-rt2x00-rt2800lib-add-BBP-register-initialization-for.patch
index 6adb9e1cd2..99f57bcd33 100644
--- a/package/kernel/mac80211/patches/600-09-rt2x00-rt2800lib-add-BBP-register-initialization-for.patch
+++ b/package/kernel/mac80211/patches/600-09-rt2x00-rt2800lib-add-BBP-register-initialization-for.patch
@@ -11,7 +11,7 @@ Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -6341,6 +6341,47 @@ static void rt2800_init_bbp_3593(struct
+@@ -6349,6 +6349,47 @@ static void rt2800_init_bbp_3593(struct
rt2800_bbp_write(rt2x00dev, 103, 0xc0);
}
@@ -59,7 +59,7 @@ Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
static void rt2800_init_bbp_53xx(struct rt2x00_dev *rt2x00dev)
{
int ant, div_mode;
-@@ -6785,6 +6826,9 @@ static void rt2800_init_bbp(struct rt2x0
+@@ -6792,6 +6833,9 @@ static void rt2800_init_bbp(struct rt2x0
case RT3593:
rt2800_init_bbp_3593(rt2x00dev);
return;
diff --git a/package/kernel/mac80211/patches/600-10-rt2x00-rt2800lib-add-RFCSR-initialization-for-RT3883.patch b/package/kernel/mac80211/patches/600-10-rt2x00-rt2800lib-add-RFCSR-initialization-for-RT3883.patch
index aa3ead6ee8..c0f1f5863b 100644
--- a/package/kernel/mac80211/patches/600-10-rt2x00-rt2800lib-add-RFCSR-initialization-for-RT3883.patch
+++ b/package/kernel/mac80211/patches/600-10-rt2x00-rt2800lib-add-RFCSR-initialization-for-RT3883.patch
@@ -21,7 +21,7 @@ Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
#define RFCSR2_TX2_EN_MT7620 FIELD8(0x20)
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -7701,6 +7701,144 @@ static void rt2800_init_rfcsr_5350(struc
+@@ -7707,6 +7707,144 @@ static void rt2800_init_rfcsr_5350(struc
rt2800_rfcsr_write(rt2x00dev, 63, 0x00);
}
@@ -134,7 +134,7 @@ Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
+ rt2800_rfcsr_write(rt2x00dev, 33, 0x32);
+ }
+
-+ rt2800_rfcsr_read(rt2x00dev, 2, &rfcsr);
++ rfcsr = rt2800_rfcsr_read(rt2x00dev, 2);
+ rt2x00_set_field8(&rfcsr, RFCSR2_RESCAL_BP, 0);
+ rt2x00_set_field8(&rfcsr, RFCSR2_RESCAL_EN, 1);
+ rt2800_rfcsr_write(rt2x00dev, 2, rfcsr);
@@ -142,23 +142,23 @@ Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
+ rt2x00_set_field8(&rfcsr, RFCSR2_RESCAL_EN, 0);
+ rt2800_rfcsr_write(rt2x00dev, 2, rfcsr);
+
-+ rt2800_rfcsr_read(rt2x00dev, 1, &rfcsr);
++ rfcsr = rt2800_rfcsr_read(rt2x00dev, 1);
+ rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1);
+ rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
+
-+ rt2800_rfcsr_read(rt2x00dev, 6, &rfcsr);
++ rfcsr = rt2800_rfcsr_read(rt2x00dev, 6);
+ rfcsr |= 0xc0;
+ rt2800_rfcsr_write(rt2x00dev, 6, rfcsr);
+
-+ rt2800_rfcsr_read(rt2x00dev, 22, &rfcsr);
++ rfcsr = rt2800_rfcsr_read(rt2x00dev, 22);
+ rfcsr |= 0x20;
+ rt2800_rfcsr_write(rt2x00dev, 22, rfcsr);
+
-+ rt2800_rfcsr_read(rt2x00dev, 46, &rfcsr);
++ rfcsr = rt2800_rfcsr_read(rt2x00dev, 46);
+ rfcsr |= 0x20;
+ rt2800_rfcsr_write(rt2x00dev, 46, rfcsr);
+
-+ rt2800_rfcsr_read(rt2x00dev, 20, &rfcsr);
++ rfcsr = rt2800_rfcsr_read(rt2x00dev, 20);
+ rfcsr &= ~0xee;
+ rt2800_rfcsr_write(rt2x00dev, 20, rfcsr);
+}
@@ -166,7 +166,7 @@ Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
static void rt2800_init_rfcsr_5390(struct rt2x00_dev *rt2x00dev)
{
rt2800_rf_init_calibration(rt2x00dev, 2);
-@@ -8543,6 +8681,9 @@ static void rt2800_init_rfcsr(struct rt2
+@@ -8549,6 +8687,9 @@ static void rt2800_init_rfcsr(struct rt2
case RT3390:
rt2800_init_rfcsr_3390(rt2x00dev);
break;
diff --git a/package/kernel/mac80211/patches/600-11-rt2x00-rt2800lib-use-the-extended-EEPROM-map-for-RT3.patch b/package/kernel/mac80211/patches/600-11-rt2x00-rt2800lib-use-the-extended-EEPROM-map-for-RT3.patch
index 0e9496c056..e74f399e65 100644
--- a/package/kernel/mac80211/patches/600-11-rt2x00-rt2800lib-use-the-extended-EEPROM-map-for-RT3.patch
+++ b/package/kernel/mac80211/patches/600-11-rt2x00-rt2800lib-use-the-extended-EEPROM-map-for-RT3.patch
@@ -10,7 +10,7 @@ Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -376,7 +376,8 @@ static unsigned int rt2800_eeprom_word_i
+@@ -381,7 +381,8 @@ static unsigned int rt2800_eeprom_word_i
wiphy_name(rt2x00dev->hw->wiphy), word))
return 0;
diff --git a/package/kernel/mac80211/patches/600-12-rt2x00-rt2800lib-force-rf-type-to-RF3853-on-RT3883.patch b/package/kernel/mac80211/patches/600-12-rt2x00-rt2800lib-force-rf-type-to-RF3853-on-RT3883.patch
index 0ac7b040ec..2e917c8ebf 100644
--- a/package/kernel/mac80211/patches/600-12-rt2x00-rt2800lib-force-rf-type-to-RF3853-on-RT3883.patch
+++ b/package/kernel/mac80211/patches/600-12-rt2x00-rt2800lib-force-rf-type-to-RF3853-on-RT3883.patch
@@ -10,8 +10,8 @@ Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -9077,6 +9077,8 @@ static int rt2800_init_eeprom(struct rt2
- rt2800_eeprom_read(rt2x00dev, EEPROM_CHIP_ID, &rf);
+@@ -9083,6 +9083,8 @@ static int rt2800_init_eeprom(struct rt2
+ rf = rt2800_eeprom_read(rt2x00dev, EEPROM_CHIP_ID);
else if (rt2x00_rt(rt2x00dev, RT3352))
rf = RF3322;
+ else if (rt2x00_rt(rt2x00dev, RT3883))
diff --git a/package/kernel/mac80211/patches/600-13-rt2x00-rt2800lib-add-channel-configuration-code-for-.patch b/package/kernel/mac80211/patches/600-13-rt2x00-rt2800lib-add-channel-configuration-code-for-.patch
index dc34a96d99..0bb2d33577 100644
--- a/package/kernel/mac80211/patches/600-13-rt2x00-rt2800lib-add-channel-configuration-code-for-.patch
+++ b/package/kernel/mac80211/patches/600-13-rt2x00-rt2800lib-add-channel-configuration-code-for-.patch
@@ -10,7 +10,7 @@ Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -3735,6 +3735,36 @@ static char rt2800_txpower_to_dev(struct
+@@ -3738,6 +3738,36 @@ static char rt2800_txpower_to_dev(struct
return clamp_t(char, txpower, MIN_A_TXPOWER, MAX_A_TXPOWER);
}
@@ -47,7 +47,7 @@ Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
struct ieee80211_conf *conf,
struct rf_channel *rf,
-@@ -3753,6 +3783,12 @@ static void rt2800_config_channel(struct
+@@ -3756,6 +3786,12 @@ static void rt2800_config_channel(struct
rt2800_txpower_to_dev(rt2x00dev, rf->channel,
info->default_power3);
@@ -60,7 +60,7 @@ Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
switch (rt2x00dev->chip.rf) {
case RF2020:
case RF3020:
-@@ -3857,6 +3893,15 @@ static void rt2800_config_channel(struct
+@@ -3860,6 +3896,15 @@ static void rt2800_config_channel(struct
rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain);
rt2800_bbp_write(rt2x00dev, 77, 0x98);
@@ -76,7 +76,7 @@ Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
} else {
rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain);
rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
-@@ -3870,6 +3915,7 @@ static void rt2800_config_channel(struct
+@@ -3873,6 +3918,7 @@ static void rt2800_config_channel(struct
!rt2x00_rt(rt2x00dev, RT6352)) {
if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) {
rt2800_bbp_write(rt2x00dev, 82, 0x62);
@@ -84,7 +84,7 @@ Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
rt2800_bbp_write(rt2x00dev, 75, 0x46);
} else {
if (rt2x00_rt(rt2x00dev, RT3593))
-@@ -3878,19 +3924,22 @@ static void rt2800_config_channel(struct
+@@ -3881,19 +3927,22 @@ static void rt2800_config_channel(struct
rt2800_bbp_write(rt2x00dev, 82, 0x84);
rt2800_bbp_write(rt2x00dev, 75, 0x50);
}
@@ -110,7 +110,7 @@ Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
rt2800_bbp_write(rt2x00dev, 83, 0x9a);
if (rt2x00_has_cap_external_lna_a(rt2x00dev))
-@@ -4013,6 +4062,23 @@ static void rt2800_config_channel(struct
+@@ -4019,6 +4068,23 @@ static void rt2800_config_channel(struct
rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, reg);
diff --git a/package/kernel/mac80211/patches/600-14-rt2x00-rt2800lib-fix-txpower_to_dev-function-for-RT3.patch b/package/kernel/mac80211/patches/600-14-rt2x00-rt2800lib-fix-txpower_to_dev-function-for-RT3.patch
index e93d2dd96f..56157510eb 100644
--- a/package/kernel/mac80211/patches/600-14-rt2x00-rt2800lib-fix-txpower_to_dev-function-for-RT3.patch
+++ b/package/kernel/mac80211/patches/600-14-rt2x00-rt2800lib-fix-txpower_to_dev-function-for-RT3.patch
@@ -10,7 +10,7 @@ Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -3722,13 +3722,15 @@ static char rt2800_txpower_to_dev(struct
+@@ -3725,13 +3725,15 @@ static char rt2800_txpower_to_dev(struct
unsigned int channel,
char txpower)
{
diff --git a/package/kernel/mac80211/patches/600-15-rt2x00-rt2800lib-use-correct-txpower-calculation-fun.patch b/package/kernel/mac80211/patches/600-15-rt2x00-rt2800lib-use-correct-txpower-calculation-fun.patch
index 463346eec4..c1409bcfa3 100644
--- a/package/kernel/mac80211/patches/600-15-rt2x00-rt2800lib-use-correct-txpower-calculation-fun.patch
+++ b/package/kernel/mac80211/patches/600-15-rt2x00-rt2800lib-use-correct-txpower-calculation-fun.patch
@@ -11,7 +11,7 @@ Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -5101,7 +5101,8 @@ static void rt2800_config_txpower(struct
+@@ -5111,7 +5111,8 @@ static void rt2800_config_txpower(struct
struct ieee80211_channel *chan,
int power_level)
{
diff --git a/package/kernel/mac80211/patches/600-16-rt2x00-rt2800lib-hardcode-txmixer-gain-values-to-zer.patch b/package/kernel/mac80211/patches/600-16-rt2x00-rt2800lib-hardcode-txmixer-gain-values-to-zer.patch
index 3efac12246..a4ccb28518 100644
--- a/package/kernel/mac80211/patches/600-16-rt2x00-rt2800lib-hardcode-txmixer-gain-values-to-zer.patch
+++ b/package/kernel/mac80211/patches/600-16-rt2x00-rt2800lib-hardcode-txmixer-gain-values-to-zer.patch
@@ -11,7 +11,7 @@ Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -8959,7 +8959,8 @@ static u8 rt2800_get_txmixer_gain_24g(st
+@@ -8965,7 +8965,8 @@ static u8 rt2800_get_txmixer_gain_24g(st
{
u16 word;
@@ -20,8 +20,8 @@ Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
+ rt2x00_rt(rt2x00dev, RT3883))
return 0;
- rt2800_eeprom_read(rt2x00dev, EEPROM_TXMIXER_GAIN_BG, &word);
-@@ -8973,7 +8974,8 @@ static u8 rt2800_get_txmixer_gain_5g(str
+ word = rt2800_eeprom_read(rt2x00dev, EEPROM_TXMIXER_GAIN_BG);
+@@ -8979,7 +8980,8 @@ static u8 rt2800_get_txmixer_gain_5g(str
{
u16 word;
@@ -30,4 +30,4 @@ Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
+ rt2x00_rt(rt2x00dev, RT3883))
return 0;
- rt2800_eeprom_read(rt2x00dev, EEPROM_TXMIXER_GAIN_A, &word);
+ word = rt2800_eeprom_read(rt2x00dev, EEPROM_TXMIXER_GAIN_A);
diff --git a/package/kernel/mac80211/patches/600-17-rt2x00-rt2800lib-use-correct-RT-XWI-size-for-RT3883.patch b/package/kernel/mac80211/patches/600-17-rt2x00-rt2800lib-use-correct-RT-XWI-size-for-RT3883.patch
index 9d12c76255..197aabd7bc 100644
--- a/package/kernel/mac80211/patches/600-17-rt2x00-rt2800lib-use-correct-RT-XWI-size-for-RT3883.patch
+++ b/package/kernel/mac80211/patches/600-17-rt2x00-rt2800lib-use-correct-RT-XWI-size-for-RT3883.patch
@@ -10,7 +10,7 @@ Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -587,6 +587,7 @@ void rt2800_get_txwi_rxwi_size(struct rt
+@@ -591,6 +591,7 @@ void rt2800_get_txwi_rxwi_size(struct rt
{
switch (rt2x00dev->chip.rt) {
case RT3593:
diff --git a/package/kernel/mac80211/patches/600-18-rt2x00-rt2800lib-fix-antenna-configuration-for-RT388.patch b/package/kernel/mac80211/patches/600-18-rt2x00-rt2800lib-fix-antenna-configuration-for-RT388.patch
index cd212f9d8d..24c0ef91b0 100644
--- a/package/kernel/mac80211/patches/600-18-rt2x00-rt2800lib-fix-antenna-configuration-for-RT388.patch
+++ b/package/kernel/mac80211/patches/600-18-rt2x00-rt2800lib-fix-antenna-configuration-for-RT388.patch
@@ -10,7 +10,7 @@ Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -2013,7 +2013,8 @@ void rt2800_config_ant(struct rt2x00_dev
+@@ -2017,7 +2017,8 @@ void rt2800_config_ant(struct rt2x00_dev
rt2800_bbp_write(rt2x00dev, 3, r3);
rt2800_bbp_write(rt2x00dev, 1, r1);
diff --git a/package/kernel/mac80211/patches/600-19-rt2x00-rt2800lib-fix-LNA-gain-configuration-for-RT38.patch b/package/kernel/mac80211/patches/600-19-rt2x00-rt2800lib-fix-LNA-gain-configuration-for-RT38.patch
index 30ea12a5cd..52733ffeb9 100644
--- a/package/kernel/mac80211/patches/600-19-rt2x00-rt2800lib-fix-LNA-gain-configuration-for-RT38.patch
+++ b/package/kernel/mac80211/patches/600-19-rt2x00-rt2800lib-fix-LNA-gain-configuration-for-RT38.patch
@@ -10,23 +10,23 @@ Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -2036,7 +2036,8 @@ static void rt2800_config_lna_gain(struc
- rt2800_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom);
+@@ -2040,7 +2040,8 @@ static void rt2800_config_lna_gain(struc
+ eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_LNA);
lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_A0);
} else if (libconf->rf.channel <= 128) {
- if (rt2x00_rt(rt2x00dev, RT3593)) {
+ if (rt2x00_rt(rt2x00dev, RT3593) ||
+ rt2x00_rt(rt2x00dev, RT3883)) {
- rt2800_eeprom_read(rt2x00dev, EEPROM_EXT_LNA2, &eeprom);
+ eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_EXT_LNA2);
lna_gain = rt2x00_get_field16(eeprom,
EEPROM_EXT_LNA2_A1);
-@@ -2046,7 +2047,8 @@ static void rt2800_config_lna_gain(struc
+@@ -2050,7 +2051,8 @@ static void rt2800_config_lna_gain(struc
EEPROM_RSSI_BG2_LNA_A1);
}
} else {
- if (rt2x00_rt(rt2x00dev, RT3593)) {
+ if (rt2x00_rt(rt2x00dev, RT3593) ||
+ rt2x00_rt(rt2x00dev, RT3883)) {
- rt2800_eeprom_read(rt2x00dev, EEPROM_EXT_LNA2, &eeprom);
+ eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_EXT_LNA2);
lna_gain = rt2x00_get_field16(eeprom,
EEPROM_EXT_LNA2_A2);
diff --git a/package/kernel/mac80211/patches/600-20-rt2x00-rt2800lib-fix-VGC-setup-for-RT3883.patch b/package/kernel/mac80211/patches/600-20-rt2x00-rt2800lib-fix-VGC-setup-for-RT3883.patch
index 8c563b8938..301928d283 100644
--- a/package/kernel/mac80211/patches/600-20-rt2x00-rt2800lib-fix-VGC-setup-for-RT3883.patch
+++ b/package/kernel/mac80211/patches/600-20-rt2x00-rt2800lib-fix-VGC-setup-for-RT3883.patch
@@ -10,7 +10,7 @@ Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -5354,7 +5354,8 @@ static u8 rt2800_get_default_vgc(struct
+@@ -5364,7 +5364,8 @@ static u8 rt2800_get_default_vgc(struct
else
vgc = 0x2e + rt2x00dev->lna_gain;
} else { /* 5GHZ band */
@@ -20,7 +20,7 @@ Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
vgc = 0x20 + (rt2x00dev->lna_gain * 5) / 3;
else if (rt2x00_rt(rt2x00dev, RT5592))
vgc = 0x24 + (2 * rt2x00dev->lna_gain);
-@@ -5374,7 +5375,8 @@ static inline void rt2800_set_vgc(struct
+@@ -5384,7 +5385,8 @@ static inline void rt2800_set_vgc(struct
{
if (qual->vgc_level != vgc_level) {
if (rt2x00_rt(rt2x00dev, RT3572) ||
@@ -30,7 +30,7 @@ Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
rt2800_bbp_write_with_rx_chain(rt2x00dev, 66,
vgc_level);
} else if (rt2x00_rt(rt2x00dev, RT5592)) {
-@@ -5421,6 +5423,11 @@ void rt2800_link_tuner(struct rt2x00_dev
+@@ -5431,6 +5433,11 @@ void rt2800_link_tuner(struct rt2x00_dev
}
break;
diff --git a/package/kernel/mac80211/patches/600-21-rt2x00-rt2800lib-fix-EEPROM-LNA-validation-for-RT388.patch b/package/kernel/mac80211/patches/600-21-rt2x00-rt2800lib-fix-EEPROM-LNA-validation-for-RT388.patch
index 6e9ef1071c..4bbc7ae44e 100644
--- a/package/kernel/mac80211/patches/600-21-rt2x00-rt2800lib-fix-EEPROM-LNA-validation-for-RT388.patch
+++ b/package/kernel/mac80211/patches/600-21-rt2x00-rt2800lib-fix-EEPROM-LNA-validation-for-RT388.patch
@@ -10,8 +10,8 @@ Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -9092,7 +9092,8 @@ static int rt2800_validate_eeprom(struct
- rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &word);
+@@ -9098,7 +9098,8 @@ static int rt2800_validate_eeprom(struct
+ word = rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2);
if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG2_OFFSET2)) > 10)
rt2x00_set_field16(&word, EEPROM_RSSI_BG2_OFFSET2, 0);
- if (!rt2x00_rt(rt2x00dev, RT3593)) {
@@ -20,8 +20,8 @@ Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
if (rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0x00 ||
rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0xff)
rt2x00_set_field16(&word, EEPROM_RSSI_BG2_LNA_A1,
-@@ -9112,7 +9113,8 @@ static int rt2800_validate_eeprom(struct
- rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &word);
+@@ -9118,7 +9119,8 @@ static int rt2800_validate_eeprom(struct
+ word = rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_A2);
if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A2_OFFSET2)) > 10)
rt2x00_set_field16(&word, EEPROM_RSSI_A2_OFFSET2, 0);
- if (!rt2x00_rt(rt2x00dev, RT3593)) {
@@ -30,13 +30,13 @@ Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
if (rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0x00 ||
rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0xff)
rt2x00_set_field16(&word, EEPROM_RSSI_A2_LNA_A2,
-@@ -9120,7 +9122,8 @@ static int rt2800_validate_eeprom(struct
+@@ -9126,7 +9128,8 @@ static int rt2800_validate_eeprom(struct
}
rt2800_eeprom_write(rt2x00dev, EEPROM_RSSI_A2, word);
- if (rt2x00_rt(rt2x00dev, RT3593)) {
+ if (rt2x00_rt(rt2x00dev, RT3593) ||
+ rt2x00_rt(rt2x00dev, RT3883)) {
- rt2800_eeprom_read(rt2x00dev, EEPROM_EXT_LNA2, &word);
+ word = rt2800_eeprom_read(rt2x00dev, EEPROM_EXT_LNA2);
if (rt2x00_get_field16(word, EEPROM_EXT_LNA2_A1) == 0x00 ||
rt2x00_get_field16(word, EEPROM_EXT_LNA2_A1) == 0xff)
diff --git a/package/kernel/mac80211/patches/600-22-rt2x00-rt2800lib-fix-txpower-compensation-for-RT3883.patch b/package/kernel/mac80211/patches/600-22-rt2x00-rt2800lib-fix-txpower-compensation-for-RT3883.patch
index 1a8ccbc9bd..e752efd0ea 100644
--- a/package/kernel/mac80211/patches/600-22-rt2x00-rt2800lib-fix-txpower-compensation-for-RT3883.patch
+++ b/package/kernel/mac80211/patches/600-22-rt2x00-rt2800lib-fix-txpower-compensation-for-RT3883.patch
@@ -10,7 +10,7 @@ Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -4348,6 +4348,9 @@ static u8 rt2800_compensate_txpower(stru
+@@ -4354,6 +4354,9 @@ static u8 rt2800_compensate_txpower(stru
if (rt2x00_rt(rt2x00dev, RT3593))
return min_t(u8, txpower, 0xc);
diff --git a/package/kernel/mac80211/patches/600-23-rt2x00-rt2800mmio-add-a-workaround-for-spurious-TX_F.patch b/package/kernel/mac80211/patches/600-23-rt2x00-rt2800mmio-add-a-workaround-for-spurious-TX_F.patch
index 7d8d2f5e13..342174f8d5 100644
--- a/package/kernel/mac80211/patches/600-23-rt2x00-rt2800mmio-add-a-workaround-for-spurious-TX_F.patch
+++ b/package/kernel/mac80211/patches/600-23-rt2x00-rt2800mmio-add-a-workaround-for-spurious-TX_F.patch
@@ -12,7 +12,7 @@ Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
--- a/drivers/net/wireless/ralink/rt2x00/rt2800mmio.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800mmio.c
-@@ -415,9 +415,9 @@ void rt2800mmio_autowake_tasklet(unsigne
+@@ -424,9 +424,9 @@ void rt2800mmio_autowake_tasklet(unsigne
}
EXPORT_SYMBOL_GPL(rt2800mmio_autowake_tasklet);
@@ -24,12 +24,12 @@ Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
int i;
/*
-@@ -438,29 +438,77 @@ static void rt2800mmio_txstatus_interrup
+@@ -447,29 +447,77 @@ static void rt2800mmio_txstatus_interrup
* Since we have only one producer and one consumer we don't
* need to lock the kfifo.
*/
- for (i = 0; i < rt2x00dev->tx->limit; i++) {
-- rt2x00mmio_register_read(rt2x00dev, TX_STA_FIFO, &status);
+- status = rt2x00mmio_register_read(rt2x00dev, TX_STA_FIFO);
-
- if (!rt2x00_get_field32(status, TX_STA_FIFO_VALID))
- break;
@@ -47,7 +47,7 @@ Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
+ if (++i >= rt2x00dev->tx->limit)
+ break;
+
-+ rt2x00mmio_register_read(rt2x00dev, TX_STA_FIFO, &status);
++ status = rt2x00mmio_register_read(rt2x00dev, TX_STA_FIFO);
+ } while (rt2x00_get_field32(status, TX_STA_FIFO_VALID));
/* Schedule the tasklet for processing the tx status. */
@@ -87,7 +87,7 @@ Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
- /* Read status and ACK all interrupts */
+ /* Read status */
- rt2x00mmio_register_read(rt2x00dev, INT_SOURCE_CSR, ®);
+ reg = rt2x00mmio_register_read(rt2x00dev, INT_SOURCE_CSR);
+
+ if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TX_FIFO_STATUS)) {
+ /* Due to unknown reason the hardware generates a
@@ -96,7 +96,7 @@ Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
+ * here to see if we have to process the actual
+ * request.
+ */
-+ rt2x00mmio_register_read(rt2x00dev, TX_STA_FIFO, &txstatus);
++ txstatus = rt2x00mmio_register_read(rt2x00dev, TX_STA_FIFO);
+ if (rt2800mmio_txstatus_is_spurious(rt2x00dev, txstatus)) {
+ /* Remove the TX_FIFO_STATUS bit so it won't be
+ * processed in this turn. The hardware will
@@ -111,7 +111,7 @@ Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
rt2x00mmio_register_write(rt2x00dev, INT_SOURCE_CSR, reg);
if (!reg)
-@@ -477,7 +525,7 @@ irqreturn_t rt2800mmio_interrupt(int irq
+@@ -486,7 +534,7 @@ irqreturn_t rt2800mmio_interrupt(int irq
mask = ~reg;
if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TX_FIFO_STATUS)) {
diff --git a/package/kernel/mac80211/patches/602-rt2x00-introduce-rt2x00eeprom.patch b/package/kernel/mac80211/patches/602-rt2x00-introduce-rt2x00eeprom.patch
index 435cc96fc5..5ad99995c2 100644
--- a/package/kernel/mac80211/patches/602-rt2x00-introduce-rt2x00eeprom.patch
+++ b/package/kernel/mac80211/patches/602-rt2x00-introduce-rt2x00eeprom.patch
@@ -1,6 +1,6 @@
---- a/.local-symbols
-+++ b/.local-symbols
-@@ -336,6 +336,7 @@ RT2X00_LIB_FIRMWARE=
+--- a/local-symbols
++++ b/local-symbols
+@@ -291,6 +291,7 @@ RT2X00_LIB_FIRMWARE=
RT2X00_LIB_CRYPTO=
RT2X00_LIB_LEDS=
RT2X00_LIB_DEBUGFS=
@@ -55,9 +55,9 @@
+#include "rt2800.h"
+
struct rt2800_ops {
- void (*register_read)(struct rt2x00_dev *rt2x00dev,
- const unsigned int offset, u32 *value);
-@@ -147,6 +149,15 @@ static inline int rt2800_read_eeprom(str
+ u32 (*register_read)(struct rt2x00_dev *rt2x00dev,
+ const unsigned int offset);
+@@ -145,6 +147,15 @@ static inline int rt2800_read_eeprom(str
{
const struct rt2800_ops *rt2800ops = rt2x00dev->ops->drv;
@@ -127,7 +127,7 @@
DECLARE_KFIFO_PTR(txstatus_fifo, u32);
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
-@@ -1418,6 +1418,10 @@ int rt2x00lib_probe_dev(struct rt2x00_de
+@@ -1421,6 +1421,10 @@ int rt2x00lib_probe_dev(struct rt2x00_de
INIT_DELAYED_WORK(&rt2x00dev->autowakeup_work, rt2x00lib_autowakeup);
INIT_WORK(&rt2x00dev->sleep_work, rt2x00lib_sleep);
@@ -138,7 +138,7 @@
/*
* Let the driver probe the device to detect the capabilities.
*/
-@@ -1556,6 +1560,11 @@ void rt2x00lib_remove_dev(struct rt2x00_
+@@ -1562,6 +1566,11 @@ void rt2x00lib_remove_dev(struct rt2x00_
* Free the driver data.
*/
kfree(rt2x00dev->drv_data);
diff --git a/package/kernel/mac80211/patches/606-rt2x00-allow_disabling_bands_through_platform_data.patch b/package/kernel/mac80211/patches/606-rt2x00-allow_disabling_bands_through_platform_data.patch
index c3cd2f4341..202dfc0b89 100644
--- a/package/kernel/mac80211/patches/606-rt2x00-allow_disabling_bands_through_platform_data.patch
+++ b/package/kernel/mac80211/patches/606-rt2x00-allow_disabling_bands_through_platform_data.patch
@@ -12,7 +12,7 @@
#endif /* _RT2X00_PLATFORM_H */
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
-@@ -1023,6 +1023,22 @@ static int rt2x00lib_probe_hw_modes(stru
+@@ -1026,6 +1026,22 @@ static int rt2x00lib_probe_hw_modes(stru
unsigned int num_rates;
unsigned int i;
diff --git a/package/kernel/mac80211/patches/607-rt2x00-add_platform_data_mac_addr.patch b/package/kernel/mac80211/patches/607-rt2x00-add_platform_data_mac_addr.patch
index bca7be8533..b8b0188040 100644
--- a/package/kernel/mac80211/patches/607-rt2x00-add_platform_data_mac_addr.patch
+++ b/package/kernel/mac80211/patches/607-rt2x00-add_platform_data_mac_addr.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
-@@ -1001,8 +1001,13 @@ static void rt2x00lib_rate(struct ieee80
+@@ -1004,8 +1004,13 @@ static void rt2x00lib_rate(struct ieee80
void rt2x00lib_set_mac_address(struct rt2x00_dev *rt2x00dev, u8 *eeprom_mac_addr)
{
diff --git a/package/kernel/mac80211/patches/608-rt2x00-allow_disabling_bands_through_dts.patch b/package/kernel/mac80211/patches/608-rt2x00-allow_disabling_bands_through_dts.patch
index 724e626ca9..ca66aa8e3b 100644
--- a/package/kernel/mac80211/patches/608-rt2x00-allow_disabling_bands_through_dts.patch
+++ b/package/kernel/mac80211/patches/608-rt2x00-allow_disabling_bands_through_dts.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
-@@ -1027,6 +1027,16 @@ static int rt2x00lib_probe_hw_modes(stru
+@@ -1030,6 +1030,16 @@ static int rt2x00lib_probe_hw_modes(stru
struct ieee80211_rate *rates;
unsigned int num_rates;
unsigned int i;
diff --git a/package/kernel/mac80211/patches/610-rt2x00-change-led-polarity-from-OF.patch b/package/kernel/mac80211/patches/610-rt2x00-change-led-polarity-from-OF.patch
index 51890e0a3b..ad70aa7826 100644
--- a/package/kernel/mac80211/patches/610-rt2x00-change-led-polarity-from-OF.patch
+++ b/package/kernel/mac80211/patches/610-rt2x00-change-led-polarity-from-OF.patch
@@ -8,7 +8,7 @@
#include "rt2x00.h"
#include "rt2800lib.h"
-@@ -9279,6 +9280,17 @@ static int rt2800_init_eeprom(struct rt2
+@@ -9285,6 +9286,17 @@ static int rt2800_init_eeprom(struct rt2
rt2800_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC);
rt2800_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY);
diff --git a/package/kernel/mac80211/patches/611-rt2x00-add-AP+STA-support.patch b/package/kernel/mac80211/patches/611-rt2x00-add-AP+STA-support.patch
index 5ef5fc8def..062b18a63b 100644
--- a/package/kernel/mac80211/patches/611-rt2x00-add-AP+STA-support.patch
+++ b/package/kernel/mac80211/patches/611-rt2x00-add-AP+STA-support.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
-@@ -1358,7 +1358,7 @@ static inline void rt2x00lib_set_if_comb
+@@ -1361,7 +1361,7 @@ static inline void rt2x00lib_set_if_comb
*/
if_limit = &rt2x00dev->if_limits_ap;
if_limit->max = rt2x00dev->ops->max_ap_intf;
diff --git a/package/kernel/mac80211/patches/650-rt2x00-add-support-for-external-PA-on-MT7620.patch b/package/kernel/mac80211/patches/650-rt2x00-add-support-for-external-PA-on-MT7620.patch
index 64a62f4b07..9fad80b672 100644
--- a/package/kernel/mac80211/patches/650-rt2x00-add-support-for-external-PA-on-MT7620.patch
+++ b/package/kernel/mac80211/patches/650-rt2x00-add-support-for-external-PA-on-MT7620.patch
@@ -25,7 +25,7 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
* EEPROM LNA
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -4114,6 +4114,61 @@ static void rt2800_config_channel(struct
+@@ -4120,6 +4120,61 @@ static void rt2800_config_channel(struct
rt2800_iq_calibrate(rt2x00dev, rf->channel);
}
@@ -34,11 +34,11 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
+ &rt2x00dev->cap_flags)) {
+ rt2x00_warn(rt2x00dev, "Using incomplete support for " \
+ "external PA\n");
-+ rt2800_register_read(rt2x00dev, RF_CONTROL3, ®);
++ reg = rt2800_register_read(rt2x00dev, RF_CONTROL3);
+ reg |= 0x00000101;
+ rt2800_register_write(rt2x00dev, RF_CONTROL3, reg);
+
-+ rt2800_register_read(rt2x00dev, RF_BYPASS3, ®);
++ reg = rt2800_register_read(rt2x00dev, RF_BYPASS3);
+ reg |= 0x00000101;
+ rt2800_register_write(rt2x00dev, RF_BYPASS3, reg);
+
@@ -84,12 +84,12 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
+ }
+ }
+
- rt2800_bbp_read(rt2x00dev, 4, &bbp);
+ bbp = rt2800_bbp_read(rt2x00dev, 4);
rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf));
rt2800_bbp_write(rt2x00dev, 4, bbp);
-@@ -9308,7 +9363,8 @@ static int rt2800_init_eeprom(struct rt2
+@@ -9314,7 +9369,8 @@ static int rt2800_init_eeprom(struct rt2
*/
- rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1, &eeprom);
+ eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1);
- if (rt2x00_rt(rt2x00dev, RT3352)) {
+ if (rt2x00_rt(rt2x00dev, RT3352) ||
@@ -97,11 +97,11 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
if (rt2x00_get_field16(eeprom,
EEPROM_NIC_CONF1_EXTERNAL_TX0_PA_3352))
__set_bit(CAPABILITY_EXTERNAL_PA_TX0,
-@@ -9319,6 +9375,18 @@ static int rt2800_init_eeprom(struct rt2
+@@ -9325,6 +9381,18 @@ static int rt2800_init_eeprom(struct rt2
&rt2x00dev->cap_flags);
}
-+ rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF2, &eeprom);
++ eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF2);
+
+ if (rt2x00_rt(rt2x00dev, RT6352) && eeprom != 0 && eeprom != 0xffff) {
+ if (rt2x00_get_field16(eeprom,
diff --git a/package/kernel/mac80211/patches/651-rt2x00-remove-unneccesary-code.patch b/package/kernel/mac80211/patches/651-rt2x00-remove-unneccesary-code.patch
index b65bd7a73e..475fcbc223 100644
--- a/package/kernel/mac80211/patches/651-rt2x00-remove-unneccesary-code.patch
+++ b/package/kernel/mac80211/patches/651-rt2x00-remove-unneccesary-code.patch
@@ -75,7 +75,7 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -4127,38 +4127,22 @@ static void rt2800_config_channel(struct
+@@ -4133,38 +4133,22 @@ static void rt2800_config_channel(struct
reg |= 0x00000101;
rt2800_register_write(rt2x00dev, RF_BYPASS3, reg);
diff --git a/package/kernel/mac80211/patches/653-0002-rtl8xxxu-Add-initial-code-to-detect-8188eu-devices.patch b/package/kernel/mac80211/patches/653-0002-rtl8xxxu-Add-initial-code-to-detect-8188eu-devices.patch
index f90ce492f0..71f93e9556 100644
--- a/package/kernel/mac80211/patches/653-0002-rtl8xxxu-Add-initial-code-to-detect-8188eu-devices.patch
+++ b/package/kernel/mac80211/patches/653-0002-rtl8xxxu-Add-initial-code-to-detect-8188eu-devices.patch
@@ -110,7 +110,7 @@ Signed-off-by: Jes Sorensen <Jes.Sorensen at redhat.com>
MODULE_FIRMWARE("rtlwifi/rtl8192cufw_A.bin");
MODULE_FIRMWARE("rtlwifi/rtl8192cufw_B.bin");
MODULE_FIRMWARE("rtlwifi/rtl8192cufw_TMSC.bin");
-@@ -6210,6 +6211,8 @@ static struct usb_device_id dev_table[]
+@@ -6212,6 +6213,8 @@ static const struct usb_device_id dev_ta
{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0xb720, 0xff, 0xff, 0xff),
.driver_info = (unsigned long)&rtl8723bu_fops},
#ifdef CPTCFG_RTL8XXXU_UNTESTED
diff --git a/package/kernel/mac80211/patches/653-0045-rtl8xxxu-Add-rtl8188etv-to-USB-device-list.patch b/package/kernel/mac80211/patches/653-0045-rtl8xxxu-Add-rtl8188etv-to-USB-device-list.patch
index 31c4b6535b..be5f72ff4d 100644
--- a/package/kernel/mac80211/patches/653-0045-rtl8xxxu-Add-rtl8188etv-to-USB-device-list.patch
+++ b/package/kernel/mac80211/patches/653-0045-rtl8xxxu-Add-rtl8188etv-to-USB-device-list.patch
@@ -13,7 +13,7 @@ Signed-off-by: Jes Sorensen <Jes.Sorensen at redhat.com>
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
-@@ -6324,6 +6324,9 @@ static struct usb_device_id dev_table[]
+@@ -6326,6 +6326,9 @@ static const struct usb_device_id dev_ta
#ifdef CPTCFG_RTL8XXXU_UNTESTED
{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x8179, 0xff, 0xff, 0xff),
.driver_info = (unsigned long)&rtl8188eu_fops},
diff --git a/package/kernel/mac80211/patches/653-0046-rtl8xxxu-Add-sitecom-dongle-to-USB-device-list.patch b/package/kernel/mac80211/patches/653-0046-rtl8xxxu-Add-sitecom-dongle-to-USB-device-list.patch
index fa8ad28d97..b4898018f8 100644
--- a/package/kernel/mac80211/patches/653-0046-rtl8xxxu-Add-sitecom-dongle-to-USB-device-list.patch
+++ b/package/kernel/mac80211/patches/653-0046-rtl8xxxu-Add-sitecom-dongle-to-USB-device-list.patch
@@ -11,7 +11,7 @@ Signed-off-by: Jes Sorensen <Jes.Sorensen at redhat.com>
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
-@@ -6327,6 +6327,9 @@ static struct usb_device_id dev_table[]
+@@ -6329,6 +6329,9 @@ static const struct usb_device_id dev_ta
/* Tested by Hans de Goede - rtl8188etv */
{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x0179, 0xff, 0xff, 0xff),
.driver_info = (unsigned long)&rtl8188eu_fops},
diff --git a/package/kernel/mac80211/patches/653-0049-rtl8xxxu-Add-rtl8188eu-USB-ID-for-D-Link-USB-GO-N150.patch b/package/kernel/mac80211/patches/653-0049-rtl8xxxu-Add-rtl8188eu-USB-ID-for-D-Link-USB-GO-N150.patch
index 05c45ca24d..669fca6706 100644
--- a/package/kernel/mac80211/patches/653-0049-rtl8xxxu-Add-rtl8188eu-USB-ID-for-D-Link-USB-GO-N150.patch
+++ b/package/kernel/mac80211/patches/653-0049-rtl8xxxu-Add-rtl8188eu-USB-ID-for-D-Link-USB-GO-N150.patch
@@ -13,7 +13,7 @@ Signed-off-by: Jes Sorensen <Jes.Sorensen at redhat.com>
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
-@@ -6330,6 +6330,9 @@ static struct usb_device_id dev_table[]
+@@ -6332,6 +6332,9 @@ static const struct usb_device_id dev_ta
/* Sitecom rtl8188eus */
{USB_DEVICE_AND_INTERFACE_INFO(0x0df6, 0x0076, 0xff, 0xff, 0xff),
.driver_info = (unsigned long)&rtl8188eu_fops},
diff --git a/package/kernel/mac80211/patches/801-libertas-configure-sysfs-links.patch b/package/kernel/mac80211/patches/801-libertas-configure-sysfs-links.patch
index 106ef706b8..cfde08d4ea 100644
--- a/package/kernel/mac80211/patches/801-libertas-configure-sysfs-links.patch
+++ b/package/kernel/mac80211/patches/801-libertas-configure-sysfs-links.patch
@@ -1,17 +1,17 @@
--- a/drivers/net/wireless/marvell/libertas/cfg.c
+++ b/drivers/net/wireless/marvell/libertas/cfg.c
-@@ -2127,6 +2127,8 @@ struct wireless_dev *lbs_cfg_alloc(struc
+@@ -2043,6 +2043,8 @@ struct wireless_dev *lbs_cfg_alloc(struc
goto err_wiphy_new;
}
+ set_wiphy_dev(wdev->wiphy, dev);
+
- lbs_deb_leave(LBS_DEB_CFG80211);
return wdev;
+ err_wiphy_new:
--- a/drivers/net/wireless/marvell/libertas/main.c
+++ b/drivers/net/wireless/marvell/libertas/main.c
-@@ -986,6 +986,7 @@ struct lbs_private *lbs_add_card(void *c
+@@ -933,6 +933,7 @@ struct lbs_private *lbs_add_card(void *c
goto err_adapter;
}
diff --git a/package/kernel/mac80211/patches/802-libertas-set-wireless-macaddr.patch b/package/kernel/mac80211/patches/802-libertas-set-wireless-macaddr.patch
index 04b4954d29..b26505de21 100644
--- a/package/kernel/mac80211/patches/802-libertas-set-wireless-macaddr.patch
+++ b/package/kernel/mac80211/patches/802-libertas-set-wireless-macaddr.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/marvell/libertas/cfg.c
+++ b/drivers/net/wireless/marvell/libertas/cfg.c
-@@ -2217,6 +2217,8 @@ int lbs_cfg_register(struct lbs_private
+@@ -2119,6 +2119,8 @@ int lbs_cfg_register(struct lbs_private
wdev->wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites);
wdev->wiphy->reg_notifier = lbs_reg_notifier;
diff --git a/package/kernel/mac80211/patches/810-b43-gpio-mask-module-option.patch b/package/kernel/mac80211/patches/810-b43-gpio-mask-module-option.patch
index fd9e6fd974..5ce49d3a07 100644
--- a/package/kernel/mac80211/patches/810-b43-gpio-mask-module-option.patch
+++ b/package/kernel/mac80211/patches/810-b43-gpio-mask-module-option.patch
@@ -10,8 +10,8 @@
struct b43_phy phy;
--- a/drivers/net/wireless/broadcom/b43/main.c
+++ b/drivers/net/wireless/broadcom/b43/main.c
-@@ -75,6 +75,11 @@ MODULE_FIRMWARE("b43/ucode16_mimo.fw");
- MODULE_FIRMWARE("b43/ucode5.fw");
+@@ -85,6 +85,11 @@ MODULE_FIRMWARE("b43/ucode40.fw");
+ MODULE_FIRMWARE("b43/ucode42.fw");
MODULE_FIRMWARE("b43/ucode9.fw");
+static int modparam_gpiomask = 0x000F;
@@ -22,7 +22,7 @@
static int modparam_bad_frames_preempt;
module_param_named(bad_frames_preempt, modparam_bad_frames_preempt, int, 0444);
MODULE_PARM_DESC(bad_frames_preempt,
-@@ -2882,10 +2887,10 @@ static int b43_gpio_init(struct b43_wlde
+@@ -2892,10 +2897,10 @@ static int b43_gpio_init(struct b43_wlde
u32 mask, set;
b43_maskset32(dev, B43_MMIO_MACCTL, ~B43_MACCTL_GPOUTSMSK, 0);
diff --git a/package/kernel/mac80211/patches/811-b43_no_pio.patch b/package/kernel/mac80211/patches/811-b43_no_pio.patch
index 79428c2784..d23387c8cd 100644
--- a/package/kernel/mac80211/patches/811-b43_no_pio.patch
+++ b/package/kernel/mac80211/patches/811-b43_no_pio.patch
@@ -11,7 +11,7 @@
b43-$(CPTCFG_B43_LEDS) += leds.o
--- a/drivers/net/wireless/broadcom/b43/main.c
+++ b/drivers/net/wireless/broadcom/b43/main.c
-@@ -2008,10 +2008,12 @@ static void b43_do_interrupt_thread(stru
+@@ -2018,10 +2018,12 @@ static void b43_do_interrupt_thread(stru
dma_reason[0], dma_reason[1],
dma_reason[2], dma_reason[3],
dma_reason[4], dma_reason[5]);
diff --git a/package/kernel/mac80211/patches/812-b43-add-antenna-control.patch b/package/kernel/mac80211/patches/812-b43-add-antenna-control.patch
index 33c9402f18..932c83b48e 100644
--- a/package/kernel/mac80211/patches/812-b43-add-antenna-control.patch
+++ b/package/kernel/mac80211/patches/812-b43-add-antenna-control.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/broadcom/b43/main.c
+++ b/drivers/net/wireless/broadcom/b43/main.c
-@@ -1648,7 +1648,7 @@ static void b43_write_beacon_template(st
+@@ -1658,7 +1658,7 @@ static void b43_write_beacon_template(st
len, ram_offset, shm_size_offset, rate);
/* Write the PHY TX control parameters. */
@@ -9,7 +9,7 @@
antenna = b43_antenna_to_phyctl(antenna);
ctl = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL);
/* We can't send beacons with short preamble. Would get PHY errors. */
-@@ -3297,8 +3297,8 @@ static int b43_chip_init(struct b43_wlde
+@@ -3307,8 +3307,8 @@ static int b43_chip_init(struct b43_wlde
/* Select the antennae */
if (phy->ops->set_rx_antenna)
@@ -20,7 +20,7 @@
if (phy->type == B43_PHYTYPE_B) {
value16 = b43_read16(dev, 0x005E);
-@@ -3998,7 +3998,6 @@ static int b43_op_config(struct ieee8021
+@@ -4008,7 +4008,6 @@ static int b43_op_config(struct ieee8021
struct b43_wldev *dev = wl->current_dev;
struct b43_phy *phy = &dev->phy;
struct ieee80211_conf *conf = &hw->conf;
@@ -28,7 +28,7 @@
int err = 0;
mutex_lock(&wl->mutex);
-@@ -4041,11 +4040,9 @@ static int b43_op_config(struct ieee8021
+@@ -4051,11 +4050,9 @@ static int b43_op_config(struct ieee8021
}
/* Antennas for RX and management frame TX. */
@@ -42,7 +42,7 @@
if (wl->radio_enabled != phy->radio_on) {
if (wl->radio_enabled) {
-@@ -5189,6 +5186,47 @@ static int b43_op_get_survey(struct ieee
+@@ -5199,6 +5196,47 @@ static int b43_op_get_survey(struct ieee
return 0;
}
@@ -90,7 +90,7 @@
static const struct ieee80211_ops b43_hw_ops = {
.tx = b43_op_tx,
.conf_tx = b43_op_conf_tx,
-@@ -5210,6 +5248,8 @@ static const struct ieee80211_ops b43_hw
+@@ -5220,6 +5258,8 @@ static const struct ieee80211_ops b43_hw
.sw_scan_complete = b43_op_sw_scan_complete_notifier,
.get_survey = b43_op_get_survey,
.rfkill_poll = b43_rfkill_poll,
@@ -99,7 +99,7 @@
};
/* Hard-reset the chip. Do not call this directly.
-@@ -5513,6 +5553,8 @@ static int b43_one_core_attach(struct b4
+@@ -5523,6 +5563,8 @@ static int b43_one_core_attach(struct b4
if (!wldev)
goto out;
@@ -108,9 +108,9 @@
wldev->use_pio = b43_modparam_pio;
wldev->dev = dev;
wldev->wl = wl;
-@@ -5605,6 +5647,9 @@ static struct b43_wl *b43_wireless_init(
+@@ -5617,6 +5659,9 @@ static struct b43_wl *b43_wireless_init(
- hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
+ wiphy_ext_feature_set(hw->wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST);
+ hw->wiphy->available_antennas_rx = 0x3;
+ hw->wiphy->available_antennas_tx = 0x3;
diff --git a/package/kernel/mac80211/patches/814-b43-only-use-gpio-0-1-for-led.patch b/package/kernel/mac80211/patches/814-b43-only-use-gpio-0-1-for-led.patch
index 8d0c0412d2..03f4524c88 100644
--- a/package/kernel/mac80211/patches/814-b43-only-use-gpio-0-1-for-led.patch
+++ b/package/kernel/mac80211/patches/814-b43-only-use-gpio-0-1-for-led.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/broadcom/b43/main.c
+++ b/drivers/net/wireless/broadcom/b43/main.c
-@@ -2899,6 +2899,14 @@ static int b43_gpio_init(struct b43_wlde
+@@ -2909,6 +2909,14 @@ static int b43_gpio_init(struct b43_wlde
} else if (dev->dev->chip_id == 0x5354) {
/* Don't allow overtaking buttons GPIOs */
set &= 0x2; /* 0x2 is LED GPIO on BCM5354 */
diff --git a/package/kernel/mac80211/patches/815-b43-always-take-overlapping-devs.patch b/package/kernel/mac80211/patches/815-b43-always-take-overlapping-devs.patch
index ef7f3c92d2..f07151aa4e 100644
--- a/package/kernel/mac80211/patches/815-b43-always-take-overlapping-devs.patch
+++ b/package/kernel/mac80211/patches/815-b43-always-take-overlapping-devs.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/broadcom/b43/main.c
+++ b/drivers/net/wireless/broadcom/b43/main.c
-@@ -117,7 +117,7 @@ static int b43_modparam_pio = 0;
+@@ -127,7 +127,7 @@ static int b43_modparam_pio = 0;
module_param_named(pio, b43_modparam_pio, int, 0644);
MODULE_PARM_DESC(pio, "Use PIO accesses by default: 0=DMA, 1=PIO");
diff --git a/package/kernel/mac80211/patches/860-brcmfmac-register-wiphy-s-during-module_init.patch b/package/kernel/mac80211/patches/860-brcmfmac-register-wiphy-s-during-module_init.patch
index 91831188ac..cc29402c0b 100644
--- a/package/kernel/mac80211/patches/860-brcmfmac-register-wiphy-s-during-module_init.patch
+++ b/package/kernel/mac80211/patches/860-brcmfmac-register-wiphy-s-during-module_init.patch
@@ -13,7 +13,7 @@ Signed-off-by: Rafał Miłecki <zajec5 at gmail.com>
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
-@@ -1180,6 +1180,7 @@ int __init brcmf_core_init(void)
+@@ -1198,6 +1198,7 @@ int __init brcmf_core_init(void)
{
if (!schedule_work(&brcmf_driver_work))
return -EBUSY;
@@ -25,7 +25,7 @@ Signed-off-by: Rafał Miłecki <zajec5 at gmail.com>
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
@@ -444,6 +444,7 @@ struct brcmf_fw {
u16 bus_nr;
- void (*done)(struct device *dev, const struct firmware *fw,
+ void (*done)(struct device *dev, int err, const struct firmware *fw,
void *nvram_image, u32 nvram_len);
+ struct completion *completion;
};
@@ -34,7 +34,7 @@ Signed-off-by: Rafał Miłecki <zajec5 at gmail.com>
@@ -478,6 +479,8 @@ static void brcmf_fw_request_nvram_done(
goto fail;
- fwctx->done(fwctx->dev, fwctx->code, nvram, nvram_length);
+ fwctx->done(fwctx->dev, 0, fwctx->code, nvram, nvram_length);
+ if (fwctx->completion)
+ complete(fwctx->completion);
kfree(fwctx);
@@ -43,31 +43,22 @@ Signed-off-by: Rafał Miłecki <zajec5 at gmail.com>
@@ -485,6 +488,8 @@ fail:
brcmf_dbg(TRACE, "failed: dev=%s\n", dev_name(fwctx->dev));
release_firmware(fwctx->code);
- device_release_driver(fwctx->dev);
+ fwctx->done(fwctx->dev, -ENOENT, NULL, NULL, 0);
+ if (fwctx->completion)
+ complete(fwctx->completion);
kfree(fwctx);
}
-@@ -500,6 +505,8 @@ static void brcmf_fw_request_code_done(c
- /* only requested code so done here */
- if (!(fwctx->flags & BRCMF_FW_REQUEST_NVRAM)) {
- fwctx->done(fwctx->dev, fw, NULL, 0);
-+ if (fwctx->completion)
-+ complete(fwctx->completion);
- kfree(fwctx);
- return;
- }
-@@ -517,6 +524,8 @@ static void brcmf_fw_request_code_done(c
- fail:
+@@ -516,6 +521,8 @@ fail:
brcmf_dbg(TRACE, "failed: dev=%s\n", dev_name(fwctx->dev));
- device_release_driver(fwctx->dev);
+ done:
+ fwctx->done(fwctx->dev, ret, fw, NULL, 0);
+ if (fwctx->completion)
+ complete(fwctx->completion);
kfree(fwctx);
}
-@@ -528,6 +537,8 @@ int brcmf_fw_get_firmwares_pcie(struct d
+@@ -527,6 +534,8 @@ int brcmf_fw_get_firmwares_pcie(struct d
u16 domain_nr, u16 bus_nr)
{
struct brcmf_fw *fwctx;
@@ -76,7 +67,7 @@ Signed-off-by: Rafał Miłecki <zajec5 at gmail.com>
brcmf_dbg(TRACE, "enter: dev=%s\n", dev_name(dev));
if (!fw_cb || !code)
-@@ -548,9 +559,17 @@ int brcmf_fw_get_firmwares_pcie(struct d
+@@ -547,9 +556,17 @@ int brcmf_fw_get_firmwares_pcie(struct d
fwctx->domain_nr = domain_nr;
fwctx->bus_nr = bus_nr;
diff --git a/package/kernel/mac80211/patches/861-brcmfmac-workaround-bug-with-some-inconsistent-BSSes.patch b/package/kernel/mac80211/patches/861-brcmfmac-workaround-bug-with-some-inconsistent-BSSes.patch
index 774b333402..7fc1e449d0 100644
--- a/package/kernel/mac80211/patches/861-brcmfmac-workaround-bug-with-some-inconsistent-BSSes.patch
+++ b/package/kernel/mac80211/patches/861-brcmfmac-workaround-bug-with-some-inconsistent-BSSes.patch
@@ -10,8 +10,8 @@ Signed-off-by: Rafał Miłecki <zajec5 at gmail.com>
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-@@ -656,9 +656,37 @@ static struct wireless_dev *brcmf_cfg802
- u32 *flags,
+@@ -655,9 +655,37 @@ static struct wireless_dev *brcmf_cfg802
+ enum nl80211_iftype type,
struct vif_params *params)
{
+ struct net_device *dev;
diff --git a/package/kernel/mac80211/patches/862-brcmfmac-Disable-power-management.patch b/package/kernel/mac80211/patches/862-brcmfmac-Disable-power-management.patch
index 1819cf3999..7c1841b770 100644
--- a/package/kernel/mac80211/patches/862-brcmfmac-Disable-power-management.patch
+++ b/package/kernel/mac80211/patches/862-brcmfmac-Disable-power-management.patch
@@ -14,7 +14,7 @@ Signed-off-by: Phil Elwell <phil at raspberrypi.org>
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-@@ -2775,6 +2775,10 @@ brcmf_cfg80211_set_power_mgmt(struct wip
+@@ -2849,6 +2849,10 @@ brcmf_cfg80211_set_power_mgmt(struct wip
* preference in cfg struct to apply this to
* FW later while initializing the dongle
*/
diff --git a/package/kernel/mac80211/patches/921-ath10k_init_devices_synchronously.patch b/package/kernel/mac80211/patches/921-ath10k_init_devices_synchronously.patch
index b966516e57..94a25b680d 100644
--- a/package/kernel/mac80211/patches/921-ath10k_init_devices_synchronously.patch
+++ b/package/kernel/mac80211/patches/921-ath10k_init_devices_synchronously.patch
@@ -14,7 +14,7 @@ Signed-off-by: Sven Eckelmann <sven at open-mesh.com>
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
-@@ -2329,6 +2329,16 @@ int ath10k_core_register(struct ath10k *
+@@ -2445,6 +2445,16 @@ int ath10k_core_register(struct ath10k *
ar->chip_id = chip_id;
queue_work(ar->workqueue, &ar->register_work);
diff --git a/package/kernel/mac80211/patches/930-ath10k_add_tpt_led_trigger.patch b/package/kernel/mac80211/patches/930-ath10k_add_tpt_led_trigger.patch
index 6137a50bcf..e0ab671760 100644
--- a/package/kernel/mac80211/patches/930-ath10k_add_tpt_led_trigger.patch
+++ b/package/kernel/mac80211/patches/930-ath10k_add_tpt_led_trigger.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
-@@ -8007,6 +8007,21 @@ static int ath10k_mac_init_rd(struct ath
+@@ -8067,6 +8067,21 @@ static int ath10k_mac_init_rd(struct ath
return 0;
}
@@ -22,9 +22,9 @@
int ath10k_mac_register(struct ath10k *ar)
{
static const u32 cipher_suites[] = {
-@@ -8244,6 +8259,12 @@ int ath10k_mac_register(struct ath10k *a
- ar->hw->wiphy->cipher_suites = cipher_suites;
- ar->hw->wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites);
+@@ -8308,6 +8323,12 @@ int ath10k_mac_register(struct ath10k *a
+
+ wiphy_ext_feature_set(ar->hw->wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST);
+#ifdef CPTCFG_MAC80211_LEDS
+ ieee80211_create_tpt_led_trigger(ar->hw,
diff --git a/package/kernel/mac80211/patches/936-ath10k-fix-otp-failure-result.patch b/package/kernel/mac80211/patches/936-ath10k-fix-otp-failure-result.patch
index d302a7d2a3..0af8025d96 100644
--- a/package/kernel/mac80211/patches/936-ath10k-fix-otp-failure-result.patch
+++ b/package/kernel/mac80211/patches/936-ath10k-fix-otp-failure-result.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
-@@ -691,7 +691,7 @@ static int ath10k_core_get_board_id_from
+@@ -757,7 +757,7 @@ static int ath10k_core_get_board_id_from
if (ret) {
ath10k_err(ar, "could not execute otp for board id check: %d\n",
ret);
diff --git a/package/kernel/mac80211/patches/940-mwl8k_init_devices_synchronously.patch b/package/kernel/mac80211/patches/940-mwl8k_init_devices_synchronously.patch
index 357faee4bf..a958c78b43 100644
--- a/package/kernel/mac80211/patches/940-mwl8k_init_devices_synchronously.patch
+++ b/package/kernel/mac80211/patches/940-mwl8k_init_devices_synchronously.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/marvell/mwl8k.c
+++ b/drivers/net/wireless/marvell/mwl8k.c
-@@ -6264,6 +6264,8 @@ static int mwl8k_probe(struct pci_dev *p
+@@ -6266,6 +6266,8 @@ static int mwl8k_probe(struct pci_dev *p
priv->running_bsses = 0;
@@ -9,7 +9,7 @@
return rc;
err_stop_firmware:
-@@ -6297,8 +6299,6 @@ static void mwl8k_remove(struct pci_dev
+@@ -6299,8 +6301,6 @@ static void mwl8k_remove(struct pci_dev
return;
priv = hw->priv;
diff --git a/package/kernel/mac80211/patches/960-0010-ath10k-limit-htt-rx-ring-size.patch b/package/kernel/mac80211/patches/960-0010-ath10k-limit-htt-rx-ring-size.patch
index d49be4df70..914472aab9 100644
--- a/package/kernel/mac80211/patches/960-0010-ath10k-limit-htt-rx-ring-size.patch
+++ b/package/kernel/mac80211/patches/960-0010-ath10k-limit-htt-rx-ring-size.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ath/ath10k/htt.h
+++ b/drivers/net/wireless/ath/ath10k/htt.h
-@@ -199,7 +199,7 @@ enum htt_rx_ring_flags {
+@@ -200,7 +200,7 @@ enum htt_rx_ring_flags {
};
#define HTT_RX_RING_SIZE_MIN 128
--
2.11.0
More information about the Lede-dev
mailing list