[LEDE-DEV] [PATCH] ipq806x: Archer C2600: fix switch ports numbering

[Baptiste Jonglez]

Can this be merged to lede-17.01?  As I mentioned in the commit, it
applies cleanly.

Thanks,
Baptiste

On 23-08-17, Baptiste Jonglez wrote:
> The order of LAN ports shown in Luci is reversed compared to what is
> written on the case of the device.  Fix the order so that they match.
> 
> Signed-off-by: Baptiste Jonglez <git at bitsofnetworks.org>
> ---
> This patch applies cleanly to the lede-17.01 branch and should
> be backported there too.
> 
>  target/linux/ipq806x/base-files/etc/board.d/02_network | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/target/linux/ipq806x/base-files/etc/board.d/02_network b/target/linux/ipq806x/base-files/etc/board.d/02_network
> index 28e42dcaf8..28dc405c8a 100755
> --- a/target/linux/ipq806x/base-files/etc/board.d/02_network
> +++ b/target/linux/ipq806x/base-files/etc/board.d/02_network
> @@ -13,7 +13,6 @@ board=$(board_name)
>  
>  case "$board" in
>  ap148 |\
> -c2600 |\
>  d7800 |\
>  r7500 |\
>  r7500v2 |\
> @@ -22,6 +21,10 @@ vr2600v)
>  	ucidef_add_switch "switch0" \
>  		"1:lan" "2:lan" "3:lan" "4:lan" "6 at eth1" "5:wan" "0 at eth0"
>  	;;
> +c2600)
> +	ucidef_add_switch "switch0" \
> +		"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "6 at eth1" "5:wan" "0 at eth0"
> +	;;
>  db149)
>  	ucidef_set_interface_lan "eth1 eth2 eth3"
>  	ucidef_add_switch "switch0" \
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/lede-dev/attachments/20170914/13e6378d/attachment-0001.sig>