[LEDE-DEV] [LEDE-DEV, v2, 07/11] uboot-at91: move BUILD_SUBTARGET from U-Boot/Default to devices

[Sandeep Sheriker Mallikarjun]

currenlty U-Boot/Default supports only at91 legacy devices.To add
sama5 support, moving BUILD_SUBTARGET from U-Boot/Default to target
devices.

Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun at microchip.com>
---
 package/boot/uboot-at91/Makefile | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/package/boot/uboot-at91/Makefile b/package/boot/uboot-at91/Makefile
index 6a806ff..68e4ba4 100644
--- a/package/boot/uboot-at91/Makefile
+++ b/package/boot/uboot-at91/Makefile
@@ -17,16 +17,17 @@ include $(INCLUDE_DIR)/package.mk
 
 define U-Boot/Default
   BUILD_TARGET:=at91
-  BUILD_SUBTARGET:=legacy
   UBOOT_IMAGE:=u-boot.bin boot.bin
 endef
 
 define U-Boot/at91sam9m10g45ek_nandflash
   NAME:=AT91SAM9M10G45-EK board (NandFlash)
+  BUILD_SUBTARGET:=legacy
 endef
 
 define U-Boot/at91sam9x5ek_nandflash
   NAME:=AT91SAM9X5-EK board (NandFlash)
+  BUILD_SUBTARGET:=legacy
 endef
 
 UBOOT_TARGETS := \
-- 
2.7.4