[LEDE-DEV] [PATCH 4/8] ipq806x: ipq4019: dts: move ap-dk01 tcsr nodes to dtsi

Roman Yeryomin roman at advem.lv
Sun Oct 29 16:18:38 PDT 2017


tcsr configuration is the same for all ap-dk01 boards

Signed-off-by: Roman Yeryomin <roman at advem.lv>
---
 .../arch/arm/boot/dts/qcom-ipq4019-fritz4040.dts   | 28 ---------------
 .../arch/arm/boot/dts/qcom-ipq4019-nbg6617.dts     | 28 ---------------
 .../arch/arm/boot/dts/qcom-ipq4019-rt-ac58u.dts    | 29 ---------------
 ...s-ipq4019-ap-dk01-add-tcsr-config-to-dtsi.patch | 42 ++++++++++++++++++++++
 4 files changed, 42 insertions(+), 85 deletions(-)
 create mode 100644 target/linux/ipq806x/patches-4.9/864-03-dts-ipq4019-ap-dk01-add-tcsr-config-to-dtsi.patch

diff --git a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-fritz4040.dts b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-fritz4040.dts
index d6f9cad3b8..e22da967ed 100644
--- a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-fritz4040.dts
+++ b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-fritz4040.dts
@@ -18,7 +18,6 @@
 #include "qcom-ipq4019-bus.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
 
 / {
 	model = "AVM FRITZ!Box 4040";
@@ -60,33 +59,6 @@
 */
 
 	soc {
-		tcsr at 194b000 {
-			/* select hostmode */
-			compatible = "qcom,tcsr";
-			reg = <0x194b000 0x100>;
-			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-			status = "ok";
-		};
-
-		ess_tcsr at 1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-
-		tcsr at 1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		tcsr at 1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
 		counter at 4a1000 {
 			compatible = "qcom,qca-gcnt";
 			reg = <0x4a1000 0x4>;
diff --git a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-nbg6617.dts b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-nbg6617.dts
index 9e8783eee2..7438da6c4d 100644
--- a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-nbg6617.dts
+++ b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-nbg6617.dts
@@ -18,7 +18,6 @@
 #include "qcom-ipq4019-bus.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
 
 / {
 	model = "ZyXEL NBG6617";
@@ -69,33 +68,6 @@
 			};
 		};
 
-		tcsr at 194b000 {
-			/* select hostmode */
-			compatible = "qcom,tcsr";
-			reg = <0x194b000 0x100>;
-			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-			status = "ok";
-		};
-
-		ess_tcsr at 1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-
-		tcsr at 1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		tcsr at 1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
 		counter at 4a1000 {
 			compatible = "qcom,qca-gcnt";
 			reg = <0x4a1000 0x4>;
diff --git a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-rt-ac58u.dts b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-rt-ac58u.dts
index 8822497250..4c4f2dbf18 100644
--- a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-rt-ac58u.dts
+++ b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-rt-ac58u.dts
@@ -18,7 +18,6 @@
 #include "qcom-ipq4019-bus.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
 
 / {
 	model = "ASUS RT-AC58U";
@@ -48,34 +47,6 @@
 	};
 
 	soc {
-
-		tcsr at 194b000 {
-			/* select hostmode */
-			compatible = "qcom,tcsr";
-			reg = <0x194b000 0x100>;
-			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-			status = "ok";
-		};
-
-		ess_tcsr at 1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-
-		tcsr at 1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		tcsr at 1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
 		counter at 4a1000 {
 			compatible = "qcom,qca-gcnt";
 			reg = <0x4a1000 0x4>;
diff --git a/target/linux/ipq806x/patches-4.9/864-03-dts-ipq4019-ap-dk01-add-tcsr-config-to-dtsi.patch b/target/linux/ipq806x/patches-4.9/864-03-dts-ipq4019-ap-dk01-add-tcsr-config-to-dtsi.patch
new file mode 100644
index 0000000000..9d11dc022e
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.9/864-03-dts-ipq4019-ap-dk01-add-tcsr-config-to-dtsi.patch
@@ -0,0 +1,42 @@
+--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
+@@ -15,12 +15,39 @@
+  */
+ 
+ #include "qcom-ipq4019.dtsi"
++#include <dt-bindings/soc/qcom,tcsr.h>
+ 
+ / {
+ 	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1";
+ 	compatible = "qcom,ipq4019";
+ 
+ 	soc {
++		tcsr at 194b000 {
++			/* select hostmode */
++			compatible = "qcom,tcsr";
++			reg = <0x194b000 0x100>;
++			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
++			status = "ok";
++		};
++
++		ess_tcsr at 1953000 {
++			compatible = "qcom,tcsr";
++			reg = <0x1953000 0x1000>;
++			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
++		};
++
++		tcsr at 1949000 {
++			compatible = "qcom,tcsr";
++			reg = <0x1949000 0x100>;
++			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
++		};
++
++		tcsr at 1957000 {
++			compatible = "qcom,tcsr";
++			reg = <0x1957000 0x100>;
++			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
++		};
++
+ 		pinctrl at 1000000 {
+ 			serial_pins: serial_pinmux {
+ 				mux {
-- 
2.11.0




More information about the Lede-dev mailing list