[LEDE-DEV] [PATCH 2/2] uqmi: replace legacy command invoke with newer type

[Koen Vandeputte]

Signed-off-by: Koen Vandeputte <koen.vandeputte at ncentric.com>
---

Verified using online shell checker

 package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh b/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh
index 079c229..9c953ea 100755
--- a/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh
+++ b/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh
@@ -111,7 +111,7 @@ proto_qmi_setup() {
 
 	echo "Starting network $interface"
 
-	pdptype=`echo "$pdptype" | awk '{print tolower($0)}'`
+	pdptype=$(echo "$pdptype" | awk '{print tolower($0)}')
 	[ "$pdptype" = "ip" -o "$pdptype" = "ipv6" -o "$pdptype" = "ipv4v6" ] || pdptype="ip"
 
 	if [ "$pdptype" = "ip" ]; then
@@ -122,7 +122,7 @@ proto_qmi_setup() {
 	fi
 
 	[ "$pdptype" = "ip" -o "$pdptype" = "ipv4v6" ] && {
-		cid_4=`uqmi -s -d "$device" --get-client-id wds`
+		cid_4=$(uqmi -s -d "$device" --get-client-id wds)
 		[ $? -ne 0 ] && {
 			echo "Unable to obtain client ID"
 			proto_notify_error "$interface" NO_CID
@@ -136,14 +136,14 @@ proto_qmi_setup() {
 			--stop-network 0xffffffff \
 			--autoconnect > /dev/null
 
-		pdh_4=`uqmi -s -d "$device" --set-client-id wds,"$cid_4" \
+		pdh_4=$(uqmi -s -d "$device" --set-client-id wds,"$cid_4" \
 			--start-network \
 			${apn:+--apn $apn} \
 			${profile:+--profile $profile} \
 			${auth:+--auth-type $auth} \
 			${username:+--username $username} \
 			${password:+--password $password} \
-			${autoconnect:+--autoconnect}`
+			${autoconnect:+--autoconnect})
 		[ $? -ne 0 ] && {
 			echo "Unable to connect IPv4"
 			uqmi -s -d "$device" --set-client-id wds,"$cid_4" --release-client-id wds
@@ -153,7 +153,7 @@ proto_qmi_setup() {
 	}
 
 	[ "$pdptype" = "ipv6" -o "$pdptype" = "ipv4v6" ] && {
-		cid_6=`uqmi -s -d "$device" --get-client-id wds`
+		cid_6=$(uqmi -s -d "$device" --get-client-id wds)
 		[ $? -ne 0 ] && {
 			echo "Unable to obtain client ID"
 			proto_notify_error "$interface" NO_CID
@@ -167,14 +167,14 @@ proto_qmi_setup() {
 			--stop-network 0xffffffff \
 			--autoconnect > /dev/null
 
-		pdh_6=`uqmi -s -d "$device" --set-client-id wds,"$cid_6" \
+		pdh_6=$(uqmi -s -d "$device" --set-client-id wds,"$cid_6" \
 			--start-network \
 			${apn:+--apn $apn} \
 			${profile:+--profile $profile} \
 			${auth:+--auth-type $auth} \
 			${username:+--username $username} \
 			${password:+--password $password} \
-			${autoconnect:+--autoconnect}`
+			${autoconnect:+--autoconnect})
 		[ $? -ne 0 ] && {
 			echo "Unable to connect IPv6"
 			uqmi -s -d "$device" --set-client-id wds,"$cid_6" --release-client-id wds
-- 
2.7.4