[LEDE-DEV] [PATCH 0/4] sunxi: add support for NanoPi M1 Plus

[Luis Araneda]

This series add support for the NanoPi M1 Plus board.

Compile and tested using a real board.

NanoPi M1 Plus key features
- SoC: Allwinner H3, Quad-core Cortex-A7 at 1.2GHz
- RAM: 1GB DDR3
- eMMC: 8GB
- microSD slot
- Ethernet 10/100/1000M
- Wifi: AP6212

Luis Araneda (4):
  uboot-sunxi: add NanoPi M1 Plus board
  sunxi: base files: add AP6212 (brcm43430) NVRAM
  mac80211: enable brcmfmac's SDIO support on sunxi target
  sunxi: add support for NanoPi M1 Plus board

 package/boot/uboot-sunxi/Makefile                  |   7 +
 package/kernel/mac80211/Makefile                   |   1 +
 .../lib/firmware/brcm/brcmfmac43430-sdio.txt       |  53 +++++++
 target/linux/sunxi/image/cortex-a7.mk              |  12 ++
 ...un8i-add-common-dtsi-file-for-nanopi-SBCs.patch | 160 ++++++++++++++++++++
 ...un8i-add-support-for-nanopi-m1-plus-board.patch | 168 +++++++++++++++++++++
 6 files changed, 401 insertions(+)
 create mode 100644 target/linux/sunxi/base-files/lib/firmware/brcm/brcmfmac43430-sdio.txt
 create mode 100644 target/linux/sunxi/patches-4.9/0045-arm-dts-sun8i-add-common-dtsi-file-for-nanopi-SBCs.patch
 create mode 100644 target/linux/sunxi/patches-4.9/205-arm-dts-sun8i-add-support-for-nanopi-m1-plus-board.patch

-- 
2.14.1