[LEDE-DEV] LEDE new image on gw5520
Outback Dingo
outbackdingo at gmail.com
Thu Nov 9 06:55:03 PST 2017
heres more data, we still have a no interfaces issue with recent LEDE trunk
On Thu, Nov 2, 2017 at 6:42 PM, Outback Dingo <outbackdingo at gmail.com> wrote:
> seems that ive lost my eth0 / eth1 interfeaces on a RECENT ... today
> image built for the gw5520
> i do however see the ifb0 and ifb1 interfaces... any ideas?
-------------- next part --------------
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.9.58 (dingo at debian) (gcc version 5.5.0 (LEDE GCC 5.5.0 r5346-4b37053398) ) #0 SMP Wed Nov 8 20:17:21 2017
[ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt:Machine model: Gateworks Ventana i.MX6 DualLite/Solo GW552X
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 131072
[ 0.000000] free_area_init_node: node 0, pgdat 80703080, node_mem_map 9fbf9000
[ 0.000000] Normal zone: 1024 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 131072 pages, LIFO batch:31
[ 0.000000] percpu: Embedded 14 pages/cpu @9fbc5000 s27340 r8192 d21812 u57344
[ 0.000000] pcpu-alloc: s27340 r8192 d21812 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
[ 0.000000] Kernel command line: console=ttymxc1,115200 ubi0:ubi ubi.mtd=2 rootfstype=squashfs,ubifs
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 512112K/524288K available (5110K kernel code, 333K rwdata, 1288K rodata, 428K init, 243K bss, 12176K reserved, 0K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xa0800000 - 0xff800000 (1520 MB)
lowmem : 0x80000000 - 0xa0000000 ( 512 MB)
modules : 0x7f000000 - 0x80000000 ( 16 MB)
.text : 0x80008000 - 0x80505b3c (5111 kB)
.init : 0x80649000 - 0x806b4000 ( 428 kB)
.data : 0x806b4000 - 0x80707434 ( 334 kB)
.bss : 0x80707434 - 0x80744368 ( 244 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] L2C: DT/platform modifies aux control register: 0x32050000 -> 0x32450000
[ 0.000000] L2C-310 erratum 769419 enabled
[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines
[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[ 0.000000] L2C-310 cache controller enabled, 16 ways, 512 kB
[ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76450001
[ 0.000000] Switching to timer-based delay loop, resolution 333ns
[ 0.000007] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns
[ 0.000027] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns
[ 0.000982] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000)
[ 0.001001] pid_max: default: 32768 minimum: 301
[ 0.001104] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.001117] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.001670] CPU: Testing write buffer coherency: ok
[ 0.001981] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.002049] Setting up static identity map for 0x10008280 - 0x100082d8
[ 0.003848] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.003959] Brought up 2 CPUs
[ 0.003979] SMP: Total of 2 processors activated (12.00 BogoMIPS).
[ 0.003990] CPU: All CPU(s) started in SVC mode.
[ 0.012219] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.012523] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.012550] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.012691] pinctrl core: initialized pinctrl subsystem
[ 0.013792] NET: Registered protocol family 16
[ 0.014599] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.015933] CPU identified as i.MX6DL, silicon rev 1.1
[ 0.034468] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.034484] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.035181] imx6dl-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver
[ 0.097085] mxs-dma 110000.dma-apbh: initialized
[ 0.098926] SCSI subsystem initialized
[ 0.099413] libata version 3.00 loaded.
[ 0.099798] usbcore: registered new interface driver usbfs
[ 0.099891] usbcore: registered new interface driver hub
[ 0.099974] usbcore: registered new device driver usb
[ 0.144398] gsc 0-0020: no GSC interrupts enabled
[ 0.164391] gsc 0-0020: Gateworks System Controller: fw v49 crc=0x062a irq70
[ 0.164425] Populating platform devices
[ 0.165337] 0-0023 supply vcc not found, using dummy regulator
[ 0.205630] i2c i2c-0: IMX I2C adapter registered
[ 0.205655] i2c i2c-0: can't use DMA, using PIO instead.
[ 0.206183] i2c i2c-1: IMX I2C adapter registered
[ 0.206205] i2c i2c-1: can't use DMA, using PIO instead.
[ 0.206659] i2c i2c-2: IMX I2C adapter registered
[ 0.206680] i2c i2c-2: can't use DMA, using PIO instead.
[ 0.206838] pps_core: LinuxPPS API ver. 1 registered
[ 0.206851] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti at linux.it>
[ 0.206884] PTP clock support registered
[ 0.208310] clocksource: Switched to clocksource mxc_timer1
[ 0.227937] NET: Registered protocol family 2
[ 0.228633] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.228690] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.228764] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.228824] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.228852] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.229021] NET: Registered protocol family 1
[ 0.229060] PCI: CLS 0 bytes, default 64
[ 0.229730] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
[ 0.232914] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 0.239853] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.243974] io scheduler noop registered
[ 0.243992] io scheduler deadline registered (default)
[ 0.245304] OF: PCI: host bridge /soc/pcie at 0x01000000 ranges:
[ 0.245323] OF: PCI: No bus range found for /soc/pcie at 0x01000000, using [bus 00-ff]
[ 0.245353] OF: PCI: IO 0x01f80000..0x01f8ffff -> 0x00000000
[ 0.245375] OF: PCI: MEM 0x01000000..0x01efffff -> 0x01000000
[ 0.458281] imx6q-pcie 1ffc000.pcie: link up
[ 0.458298] imx6q-pcie 1ffc000.pcie: Link: Gen2 disabled
[ 0.458313] imx6q-pcie 1ffc000.pcie: link up
[ 0.458325] imx6q-pcie 1ffc000.pcie: Link up, Gen1
[ 0.458574] imx6q-pcie 1ffc000.pcie: PCI host bridge to bus 0000:00
[ 0.458595] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.458608] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.458621] pci_bus 0000:00: root bus resource [mem 0x01000000-0x01efffff]
[ 0.458662] pci 0000:00:00.0: [16c3:abcd] type 01 class 0x060400
[ 0.458693] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
[ 0.458712] pci 0000:00:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
[ 0.458789] pci 0000:00:00.0: supports D1
[ 0.458797] pci 0000:00:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.459047] PCI: bus0: Fast back to back transfers disabled
[ 0.459303] pci 0000:01:00.0: [10b5:8606] type 01 class 0x060400
[ 0.588342] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x0001ffff]
[ 0.588978] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.589351] PCI: bus1: Fast back to back transfers disabled
[ 0.589378] pci 0000:01:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.589745] pci_bus 0000:02: busn_res: can not insert [bus 02-ff] under [bus 01] (conflicts with (null) [bus 01])
[ 0.589869] pci 0000:02:01.0: [10b5:8606] type 01 class 0x060400
[ 0.590565] pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
[ 0.590994] pci 0000:02:04.0: [10b5:8606] type 01 class 0x060400
[ 0.591687] pci 0000:02:04.0: PME# supported from D0 D3hot D3cold
[ 0.592090] pci 0000:02:05.0: [10b5:8606] type 01 class 0x060400
[ 0.592768] pci 0000:02:05.0: PME# supported from D0 D3hot D3cold
[ 0.593190] pci 0000:02:07.0: [10b5:8606] type 01 class 0x060400
[ 0.593876] pci 0000:02:07.0: PME# supported from D0 D3hot D3cold
[ 0.594279] pci 0000:02:09.0: [10b5:8606] type 01 class 0x060400
[ 0.594959] pci 0000:02:09.0: PME# supported from D0 D3hot D3cold
[ 0.595687] PCI: bus2: Fast back to back transfers disabled
[ 0.595715] pci 0000:02:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.595772] pci 0000:02:04.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.595827] pci 0000:02:05.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.595876] pci 0000:02:07.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.595928] pci 0000:02:09.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.596405] pci 0000:03:00.0: [8086:1533] type 00 class 0x020000
[ 0.596511] pci 0000:03:00.0: reg 0x10: [mem 0x00000000-0x0001ffff]
[ 0.596604] pci 0000:03:00.0: reg 0x18: [io 0x0000-0x001f]
[ 0.596656] pci 0000:03:00.0: reg 0x1c: [mem 0x00000000-0x00003fff]
[ 0.597229] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.597635] PCI: bus3: Fast back to back transfers disabled
[ 0.597654] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 03
[ 0.597676] pci_bus 0000:03: [bus 03] partially hidden behind bridge 0000:01 [bus 01]
[ 0.598032] PCI: bus4: Fast back to back transfers enabled
[ 0.598050] pci_bus 0000:04: busn_res: [bus 04-ff] end is updated to 04
[ 0.598072] pci_bus 0000:04: [bus 04] partially hidden behind bridge 0000:01 [bus 01]
[ 0.598477] PCI: bus5: Fast back to back transfers enabled
[ 0.598498] pci_bus 0000:05: busn_res: [bus 05-ff] end is updated to 05
[ 0.598518] pci_bus 0000:05: [bus 05] partially hidden behind bridge 0000:01 [bus 01]
[ 0.598880] PCI: bus6: Fast back to back transfers enabled
[ 0.598899] pci_bus 0000:06: busn_res: [bus 06-ff] end is updated to 06
[ 0.598919] pci_bus 0000:06: [bus 06] partially hidden behind bridge 0000:01 [bus 01]
[ 0.599368] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000
[ 0.599476] pci 0000:07:00.0: reg 0x10: [mem 0x00000000-0x0001ffff]
[ 0.599570] pci 0000:07:00.0: reg 0x18: [io 0x0000-0x001f]
[ 0.599622] pci 0000:07:00.0: reg 0x1c: [mem 0x00000000-0x00003fff]
[ 0.600202] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
[ 0.600616] PCI: bus7: Fast back to back transfers disabled
[ 0.600637] pci_bus 0000:07: busn_res: [bus 07-ff] end is updated to 07
[ 0.600657] pci_bus 0000:07: [bus 07] partially hidden behind bridge 0000:01 [bus 01]
[ 0.600679] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 07
[ 0.600690] pci_bus 0000:02: busn_res: can not insert [bus 02-07] under [bus 01] (conflicts with (null) [bus 01])
[ 0.600709] pci_bus 0000:02: [bus 02-07] partially hidden behind bridge 0000:01 [bus 01]
[ 0.600731] pci 0000:00:00.0: bridge has subordinate 01 but max busn 07
[ 0.601631] pci 0000:00:00.0: BAR 0: assigned [mem 0x01000000-0x010fffff]
[ 0.601653] pci 0000:00:00.0: BAR 8: assigned [mem 0x01100000-0x013fffff]
[ 0.601669] pci 0000:00:00.0: BAR 6: assigned [mem 0x01400000-0x0140ffff pref]
[ 0.601684] pci 0000:00:00.0: BAR 7: assigned [io 0x1000-0x2fff]
[ 0.601701] pci 0000:01:00.0: BAR 8: assigned [mem 0x01100000-0x012fffff]
[ 0.601716] pci 0000:01:00.0: BAR 0: assigned [mem 0x01300000-0x0131ffff]
[ 0.601746] pci 0000:01:00.0: BAR 7: assigned [io 0x1000-0x2fff]
[ 0.601766] pci 0000:02:01.0: BAR 8: assigned [mem 0x01100000-0x011fffff]
[ 0.601781] pci 0000:02:09.0: BAR 8: assigned [mem 0x01200000-0x012fffff]
[ 0.601793] pci 0000:02:01.0: BAR 7: assigned [io 0x1000-0x1fff]
[ 0.601805] pci 0000:02:09.0: BAR 7: assigned [io 0x2000-0x2fff]
[ 0.601823] pci 0000:03:00.0: BAR 0: assigned [mem 0x01100000-0x0111ffff]
[ 0.601855] pci 0000:03:00.0: BAR 3: assigned [mem 0x01120000-0x01123fff]
[ 0.601887] pci 0000:03:00.0: BAR 2: assigned [io 0x1000-0x101f]
[ 0.601920] pci 0000:02:01.0: PCI bridge to [bus 03]
[ 0.601941] pci 0000:02:01.0: bridge window [io 0x1000-0x1fff]
[ 0.601977] pci 0000:02:01.0: bridge window [mem 0x01100000-0x011fffff]
[ 0.602038] pci 0000:02:04.0: PCI bridge to [bus 04]
[ 0.602118] pci 0000:02:05.0: PCI bridge to [bus 05]
[ 0.602200] pci 0000:02:07.0: PCI bridge to [bus 06]
[ 0.602284] pci 0000:07:00.0: BAR 0: assigned [mem 0x01200000-0x0121ffff]
[ 0.602316] pci 0000:07:00.0: BAR 3: assigned [mem 0x01220000-0x01223fff]
[ 0.602346] pci 0000:07:00.0: BAR 2: assigned [io 0x2000-0x201f]
[ 0.602375] pci 0000:02:09.0: PCI bridge to [bus 07]
[ 0.602394] pci 0000:02:09.0: bridge window [io 0x2000-0x2fff]
[ 0.602427] pci 0000:02:09.0: bridge window [mem 0x01200000-0x012fffff]
[ 0.602482] pci 0000:01:00.0: PCI bridge to [bus 02-07]
[ 0.602501] pci 0000:01:00.0: bridge window [io 0x1000-0x2fff]
[ 0.602534] pci 0000:01:00.0: bridge window [mem 0x01100000-0x012fffff]
[ 0.602589] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 0.602601] pci 0000:00:00.0: bridge window [io 0x1000-0x2fff]
[ 0.602613] pci 0000:00:00.0: bridge window [mem 0x01100000-0x013fffff]
[ 0.602895] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt
[ 0.602910] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.602921] pci 0000:02:01.0: Signaling PME through PCIe PME interrupt
[ 0.602931] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.602941] pci 0000:02:04.0: Signaling PME through PCIe PME interrupt
[ 0.602950] pci 0000:02:05.0: Signaling PME through PCIe PME interrupt
[ 0.602960] pci 0000:02:07.0: Signaling PME through PCIe PME interrupt
[ 0.602971] pci 0000:02:09.0: Signaling PME through PCIe PME interrupt
[ 0.602980] pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
[ 0.602994] pcie_pme 0000:00:00.0:pcie001: service driver pcie_pme loaded
[ 0.603260] pcieport 0000:01:00.0: enabling device (0140 -> 0143)
[ 0.604048] pcieport 0000:02:01.0: enabling device (0140 -> 0143)
[ 0.606795] pcieport 0000:02:09.0: enabling device (0140 -> 0143)
[ 0.612402] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.613768] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 61, base_baud = 5000000) is a IMX
[ 0.618358] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2
[ 0.618364] imx-sdma 20ec000.sdma: Falling back to user helper
[ 1.690580] console [ttymxc1] enabled
[ 1.694833] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 62, base_baud = 5000000) is a IMX
[ 1.704071] 21f4000.serial: ttymxc4 at MMIO 0x21f4000 (irq = 63, base_baud = 5000000) is a IMX
[ 1.719745] random: fast init done
[ 1.724367] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.730764] nand: Micron MT29F2G08ABAEAH4
[ 1.734783] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 1.742922] gpmi-nand 112000.gpmi-nand: enable the asynchronous EDO mode 5
[ 1.749843] Scanning device for bad blocks
[ 1.939287] 3 ofpart partitions found on MTD device gpmi-nand
[ 1.945044] Creating 3 MTD partitions on "gpmi-nand":
[ 1.950137] 0x000000000000-0x000001000000 : "uboot"
[ 1.958136] 0x000001000000-0x000001100000 : "env"
[ 1.964053] 0x000001100000-0x000010000000 : "ubi"
[ 1.999739] gpmi-nand 112000.gpmi-nand: driver registered.
[ 2.006256] libphy: Fixed MDIO Bus: probed
[ 2.011497] libphy: mdio_driver_register: mv88e6085
[ 2.016965] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.023544] ehci-pci: EHCI PCI platform driver
[ 2.029767] 2184200.usb supply vbus not found, using dummy regulator
[ 2.039452] ci_hdrc ci_hdrc.0: EHCI Host Controller
[ 2.044372] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
[ 2.078295] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
[ 2.084520] hub 1-0:1.0: USB hub found
[ 2.088393] hub 1-0:1.0: 1 port detected
[ 2.094509] rtc-ds1672 0-0068: rtc core: registered rtc-ds1672 as rtc0
[ 2.101874] i2c /dev entries driver
[ 2.107124] gsc_wdt 21a0000.i2c:gsc at 20:watchdog: GSC WDT_ENABLE not enabled - must be manually enabled
[ 2.116492] gsc_wdt: probe of 21a0000.i2c:gsc at 20:watchdog failed with error -22
[ 2.124541] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0)
[ 2.131147] sdhci: Secure Digital Host Controller Interface driver
[ 2.137339] sdhci: Copyright(c) Pierre Ossman
[ 2.141732] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.149372] caam 2100000.caam: Entropy delay = 3200
[ 2.215048] caam 2100000.caam: Instantiated RNG4 SH0
[ 2.275808] caam 2100000.caam: Instantiated RNG4 SH1
[ 2.280914] caam 2100000.caam: device ID = 0x0a16010000000100 (Era 4)
[ 2.287364] caam 2100000.caam: job rings = 2, qi = 0
[ 2.297829] caam algorithms registered in /proc/crypto
[ 2.306830] caam_jr 2101000.jr0: registering rng-caam
[ 2.313481] NET: Registered protocol family 10
[ 2.319139] NET: Registered protocol family 17
[ 2.323648] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 2.336891] 8021q: 802.1Q VLAN Support v1.8
[ 2.342449] Registering SWP/SWPB emulation handler
[ 2.349791] Key type encrypted registered
[ 2.365659] imx_thermal 2000000.aips-bus:tempmon: Industrial CPU temperature grade - max:105C critical:100C passive:95C
[ 2.377038] ubi0: attaching mtd2
[ 2.458297] usb 1-1: new high-speed USB device number 2 using ci_hdrc
[ 2.583428] random: crng init done
[ 2.649444] hub 1-1:1.0: USB hub found
[ 2.653383] hub 1-1:1.0: 4 ports detected
[ 2.836058] ubi0: scanning is finished
[ 2.846574] ubi0: attached mtd2 (name "ubi", size 239 MiB)
[ 2.852120] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 2.859020] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 2.865816] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 2.872800] ubi0: good PEBs: 1912, bad PEBs: 0, corrupted PEBs: 0
[ 2.878920] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128
[ 2.886153] ubi0: max/mean erase counter: 11/5, WL threshold: 4096, image sequence number: 731262782
[ 2.895304] ubi0: available PEBs: 0, total reserved PEBs: 1912, PEBs reserved for bad PEB handling: 40
[ 2.904707] ubi0: background thread "ubi_bgt0d" started, PID 685
[ 2.911810] block ubiblock0_1: created from ubi0:1(rootfs)
[ 2.917311] ubiblock: device ubiblock0_1 (rootfs) set to be root filesystem
[ 2.925436] rtc-ds1672 0-0068: setting system clock to 1970-07-08 01:29:46 UTC (16248586)
[ 2.937480] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 2.945116] Freeing unused kernel memory: 428K
[ 2.949601] This architecture does not have kernel memory protection.
[ 3.227975] init: Console is alive
[ 3.231644] init: - watchdog -
[ 4.145733] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 4.218245] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.225179] ohci-platform: OHCI generic platform driver
[ 4.231903] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.241991] usbcore: registered new interface driver usb-storage
[ 4.248185] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 4.257680] init: - preinit -
[ 7.867256] mount_root: loading kmods from internal overlay
[ 7.898426] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[ 7.906893] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[ 7.992936] blk_update_request: I/O error, dev mtdblock0, sector 0
[ 8.002799] blk_update_request: I/O error, dev mtdblock0, sector 0
[ 8.008994] Buffer I/O error on dev mtdblock0, logical block 0, async page read
[ 8.127335] blk_update_request: I/O error, dev mtdblock0, sector 0
[ 8.133535] Buffer I/O error on dev mtdblock0, logical block 0, async page read
[ 8.556231] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 764
[ 8.579198] UBIFS (ubi0:2): recovery needed
[ 8.637777] UBIFS (ubi0:2): recovery completed
[ 8.642335] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data"
[ 8.650196] UBIFS (ubi0:2): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 8.660138] UBIFS (ubi0:2): FS size: 205066240 bytes (195 MiB, 1615 LEBs), journal size 10285056 bytes (9 MiB, 81 LEBs)
[ 8.670941] UBIFS (ubi0:2): reserved for root: 4952683 bytes (4836 KiB)
[ 8.677569] UBIFS (ubi0:2): media format: w4/r0 (latest is w4/r0), UUID 56E14560-D50A-418E-821A-B6C86BCC305B, small LPT model
[ 8.690607] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[ 8.700621] block: extroot: not configured
[ 8.748431] UBIFS (ubi0:2): un-mount UBI device 0
[ 8.753173] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" stops
[ 8.762806] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 767
[ 8.802400] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data"
[ 8.810291] UBIFS (ubi0:2): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 8.820238] UBIFS (ubi0:2): FS size: 205066240 bytes (195 MiB, 1615 LEBs), journal size 10285056 bytes (9 MiB, 81 LEBs)
[ 8.831047] UBIFS (ubi0:2): reserved for root: 4952683 bytes (4836 KiB)
[ 8.837676] UBIFS (ubi0:2): media format: w4/r0 (latest is w4/r0), UUID 56E14560-D50A-418E-821A-B6C86BCC305B, small LPT model
[ 8.856506] blk_update_request: I/O error, dev mtdblock0, sector 0
[ 8.866368] blk_update_request: I/O error, dev mtdblock0, sector 0
[ 8.872564] Buffer I/O error on dev mtdblock0, logical block 0, async page read
[ 8.885300] blk_update_request: I/O error, dev mtdblock0, sector 0
[ 8.891499] Buffer I/O error on dev mtdblock0, logical block 0, async page read
[ 9.268371] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[ 9.278013] block: extroot: not configured
[ 9.319739] mount_root: switching to ubifs overlay
[ 9.351580] urandom-seed: Seeding with /etc/urandom.seed
[ 9.426637] procd: - early -
[ 9.429658] procd: - watchdog -
[ 9.546964] procd: cannot set group tty for /dev/ttymxc1
[ 9.559141] procd: cannot set group tty for /dev/ttyS0
[ 9.565015] procd: cannot set group tty for /dev/ttymxc4
[ 9.574114] procd: cannot set group tty for /dev/ttymxc2
[ 9.580345] procd: cannot set group tty for /dev/ttyS1
[ 10.091858] procd: - watchdog -
[ 10.095263] procd: - ubus -
[ 10.251012] procd: - init -
[ 10.446747] kmodloader: loading kernel modules from /etc/modules.d/*
[ 10.466850] Key type dns_resolver registered
[ 10.487953] loop: module loaded
[ 10.510769] tun: Universal TUN/TAP device driver, 1.6
[ 10.515861] tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
[ 10.529465] gre: GRE over IPv4 demultiplexor driver
[ 10.535426] ip_gre: GRE over IPv4 tunneling driver
[ 10.544754] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[ 10.558829] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 10.570377] cryptodev: driver 1.9 loaded.
[ 10.578557] gsc_hwmon 0-0029: gsc_hwmon chip found
[ 10.590669] hidraw: raw HID events driver (C) Jiri Kosina
[ 10.604653] u32 classifier
[ 10.607381] input device check on
[ 10.611125] Actions configured
[ 10.615976] Mirror/redirect action on
[ 10.624715] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
[ 10.648540] Bluetooth: Core ver 2.22
[ 10.652223] NET: Registered protocol family 31
[ 10.656676] Bluetooth: HCI device and connection manager initialized
[ 10.663081] Bluetooth: HCI socket layer initialized
[ 10.667974] Bluetooth: L2CAP socket layer initialized
[ 10.673081] Bluetooth: SCO socket layer initialized
[ 10.679550] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 10.684878] Bluetooth: BNEP filters: protocol multicast
[ 10.690159] Bluetooth: BNEP socket layer initialized
[ 10.696150] Bridge firewalling registered
[ 10.702592] usbcore: registered new interface driver btusb
[ 10.709340] usbcore: registered new interface driver cdc_acm
[ 10.715019] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 10.724383] usbcore: registered new interface driver cdc_wdm
[ 10.731070] Loading modules backported from Linux version wt-2017-10-06-0-ga7a22fbbd1f0
[ 10.739139] Backport generated by backports.git v4.14-rc2-1-6-gedfb595c
[ 10.749489] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 10.755345] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 10.772094] Ebtables v2.0 registered
[ 10.776784] Bluetooth: HCI UART driver ver 2.3
[ 10.781280] Bluetooth: HCI UART protocol H4 registered
[ 10.786426] Bluetooth: HCI UART protocol BCSP registered
[ 10.791757] Bluetooth: HCI UART protocol ATH3K registered
[ 10.798520] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 10.804472] Bluetooth: HIDP socket layer initialized
[ 10.810808] hso: drivers/net/usb/hso.c: Option Wireless
[ 10.816199] usbcore: registered new interface driver hso
[ 10.823157] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 10.892719] Bluetooth: RFCOMM TTY layer initialized
[ 10.897631] Bluetooth: RFCOMM socket layer initialized
[ 10.902840] Bluetooth: RFCOMM ver 1.11
[ 10.912416] usbcore: registered new interface driver ums-alauda
[ 10.919814] usbcore: registered new interface driver ums-cypress
[ 10.927366] usbcore: registered new interface driver ums-datafab
[ 10.935244] usbcore: registered new interface driver ums-freecom
[ 10.942834] usbcore: registered new interface driver ums-isd200
[ 10.950750] usbcore: registered new interface driver ums-jumpshot
[ 10.958349] usbcore: registered new interface driver ums-karma
[ 10.966039] usbcore: registered new interface driver ums-sddr09
[ 10.973552] usbcore: registered new interface driver ums-sddr55
[ 10.981209] usbcore: registered new interface driver ums-usbat
[ 10.988853] usbip_core: USB/IP Core v1.0.0
[ 10.994225] usbcore: registered new device driver usbip-host
[ 10.999960] usbip_host: USB/IP Host Driver v1.0.0
[ 11.011101] usbcore: registered new interface driver usbserial
[ 11.017053] usbcore: registered new interface driver usbserial_generic
[ 11.023734] usbserial: USB Serial support registered for generic
[ 11.031419] vhci_hcd vhci_hcd: USB/IP Virtual Host Controller
[ 11.037196] vhci_hcd vhci_hcd: new USB bus registered, assigned bus number 2
[ 11.044345] vhci_hcd: created sysfs vhci_hcd
[ 11.049844] hub 2-0:1.0: USB hub found
[ 11.053666] hub 2-0:1.0: 8 ports detected
[ 11.058813] vhci_hcd: USB/IP 'Virtual' Host Controller (VHCI) Driver v1.0.0
[ 11.069232] wireguard: WireGuard 0.0.20171101 loaded. See www.wireguard.com for information.
[ 11.077690] wireguard: Copyright (C) 2015-2017 Jason A. Donenfeld <Jason at zx2c4.com>. All Rights Reserved.
[ 11.113101] xt_time: kernel timezone is -0000
[ 11.118527] usbcore: registered new interface driver ath3k
[ 11.126254] usbcore: registered new interface driver cdc_ncm
[ 11.159083] usbcore: registered new interface driver ftdi_sio
[ 11.164946] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 11.203034] PPP generic driver version 2.4.2
[ 11.209046] NET: Registered protocol family 24
[ 11.215346] usbcore: registered new interface driver qmi_wwan
[ 11.222643] usbcore: registered new interface driver sierra
[ 11.228433] usbserial: USB Serial support registered for Sierra USB modem
[ 11.236682] usbcore: registered new interface driver sierra_net
[ 11.260356] usbcore: registered new interface driver option
[ 11.266057] usbserial: USB Serial support registered for GSM modem (1-port)
[ 11.281761] usbcore: registered new interface driver ath9k_htc
[ 11.287814] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 14.143813] blk_update_request: I/O error, dev mtdblock0, sector 0
[ 14.210444] blk_update_request: I/O error, dev mtdblock0, sector 0
[ 14.216650] Buffer I/O error on dev mtdblock0, logical block 0, async page read
[ 14.251216] blk_update_request: I/O error, dev mtdblock0, sector 0
[ 14.257419] Buffer I/O error on dev mtdblock0, logical block 0, async page read
[ 64.488443] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware
[ 113.908287] usb 1-1.3: new high-speed USB device number 3 using ci_hdrc
[ 114.062217] usb-storage 1-1.3:1.0: USB Mass Storage device detected
[ 114.069137] scsi host0: usb-storage 1-1.3:1.0
[ 115.129474] scsi 0:0:0:0: Direct-Access Imation Imation USB PMAP PQ: 0 ANSI: 0 CCS
[ 116.031315] sd 0:0:0:0: [sda] 2013184 512-byte logical blocks: (1.03 GB/983 MiB)
[ 116.039180] sd 0:0:0:0: [sda] Write Protect is off
[ 116.043987] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
[ 116.044425] sd 0:0:0:0: [sda] No Caching mode page found
[ 116.049793] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 116.060075] sda: sda1
[ 116.069567] sd 0:0:0:0: [sda] Attached SCSI removable disk
-------------- next part --------------
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:240 errors:0 dropped:0 overruns:0 frame:0
TX packets:240 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1
RX bytes:16348 (15.9 KiB) TX bytes:16348 (15.9 KiB)
-------------- next part --------------
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: ifb0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 32
link/ether ea:ab:d0:95:ae:57 brd ff:ff:ff:ff:ff:ff
3: ifb1: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 32
link/ether 82:dd:56:62:d3:7d brd ff:ff:ff:ff:ff:ff
4: gre0 at NONE: <NOARP> mtu 1476 qdisc noop state DOWN group default qlen 1
link/gre 0.0.0.0 brd 0.0.0.0
5: gretap0 at NONE: <BROADCAST,MULTICAST> mtu 1462 qdisc noop state DOWN group default qlen 1000
link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
6: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 02:66:1c:ba:bc:5c brd ff:ff:ff:ff:ff:ff
-------------- next part --------------
config interface 'loopback'
option ifname 'lo'
option proto 'static'
option ipaddr '127.0.0.1'
option netmask '255.0.0.0'
config globals 'globals'
option ula_prefix 'fd56:fe5b:85cd::/48'
config interface 'lan'
option type 'bridge'
option ifname 'eth0'
option proto 'static'
option ipaddr '192.168.10.1'
option netmask '255.255.255.0'
option ip6assign '60'
config interface 'wan'
option ifname 'eth1'
option proto 'dhcp'
config interface 'wan6'
option ifname 'eth1'
option proto 'dhcpv6'
More information about the Lede-dev
mailing list