[LEDE-DEV] [PATCH] hostapd: explicitly set beacon interval for wpa_supplicant

[Sven Eckelmann]

The beacon_int is currently set explicitly for hostapd and when LEDE uses
iw to join an IBSS/mesh. But it was not done when wpa_supplicant was used
to join an encrypted IBSS or mesh.

This configuration is required when an AP interface is configured together
with an mesh interface. The beacon_int= line must therefore be re-added to
the wpa_supplicant config. The value is retrieved from the the global
variable.

Fixes: 1a16cb9c67f0 ("mac80211, hostapd: always explicitly set beacon interval")
Signed-off-by: Sven Eckelmann <sven.eckelmann at openmesh.com>
---
This patch was only tested with LEDE 17.01.4. And only in sta and mesh mode.

 package/network/services/hostapd/files/hostapd.sh | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/package/network/services/hostapd/files/hostapd.sh b/package/network/services/hostapd/files/hostapd.sh
index 68f84c5e8b..5a9381b4d1 100644
--- a/package/network/services/hostapd/files/hostapd.sh
+++ b/package/network/services/hostapd/files/hostapd.sh
@@ -713,8 +713,9 @@ wpa_supplicant_add_network() {
 			;;
 		esac
 	}
-	local beacon_int brates mrate
+
 	[ -n "$bssid" ] && append network_data "bssid=$bssid" "$N$T"
+	[ -n "$beacon_int" ] && append network_data "beacon_int=$beacon_int" "$N$T"
 
 	local bssid_blacklist bssid_whitelist
 	json_get_values bssid_blacklist bssid_blacklist
-- 
2.11.0