[LEDE-DEV] [RFC 2/3] ipq: Don't force selection of the IPQ4019 firmware.

Christian Lamparter chunkeey at gmail.com
Fri Nov 3 17:58:32 PDT 2017


On Friday, November 3, 2017 5:05:39 PM CET greearb at candelatech.com wrote:
> From: Ben Greear <greearb at candelatech.com>
> 
> This will allow us to select the CT IPQ4019 firmware instead if
> desired.
> 
> Signed-off-by: Ben Greear <greearb at candelatech.com>
> ---
>  package/firmware/ipq-wifi/Makefile | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/package/firmware/ipq-wifi/Makefile b/package/firmware/ipq-wifi/Makefile
> index aec8bf2..31d0fbf 100644
> --- a/package/firmware/ipq-wifi/Makefile
> +++ b/package/firmware/ipq-wifi/Makefile
> @@ -20,7 +20,7 @@ define Package/ipq-wifi-default
>    SUBMENU:=ath10k IPQ4019 Boarddata
>    SECTION:=firmware
>    CATEGORY:=Firmware
> -  DEPENDS:=@TARGET_ipq806x +ath10k-firmware-qca4019
> +  DEPENDS:=@TARGET_ipq806x
Hm, this would break the WIFI in the default configuration for the 
FritzBox 4040 image. Currently it only has a dependency on the 
ipq-wifi-fritz4040. (So it will end up without a firmware-5.bin)

Please also note that the ipq-wifi boards need to overwrite the 
board-2.bin provided by the ath10k-firmware-qca4019(-ct) packages.
So switching (or up-/downgrading) these wifi-firmwares will always
require the (manual) reinstallation of the ipq-wifi board
(if available).



More information about the Lede-dev mailing list