[LEDE-DEV] [PATCH v3 3/6] ipq806x: Added bam transaction and support additional CSRs
Ram Chandra Jangir
rjangir at codeaurora.org
Wed May 24 16:31:01 PDT 2017
This change adds support for below:
- Bam transaction which will be used for any NAND request.
- Reset function for NAND BAM transaction
- Add support for additional CSRs.
Signed-off-by: Ram Chandra Jangir <rjangir at codeaurora.org>
---
Changes since v2:
*Splitted to individual patches
...nd-Added-bam-transaction-and-support-addi.patch | 1273 ++++++++++++++++++++
1 file changed, 1273 insertions(+)
create mode 100644 target/linux/ipq806x/patches-4.9/861-qcom-mtd-nand-Added-bam-transaction-and-support-addi.patch
diff --git a/target/linux/ipq806x/patches-4.9/861-qcom-mtd-nand-Added-bam-transaction-and-support-addi.patch b/target/linux/ipq806x/patches-4.9/861-qcom-mtd-nand-Added-bam-transaction-and-support-addi.patch
new file mode 100644
index 0000000..674de77
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.9/861-qcom-mtd-nand-Added-bam-transaction-and-support-addi.patch
@@ -0,0 +1,1273 @@
+From 645c7805f2602569263d7ac78050b2c9e91e3377 Mon Sep 17 00:00:00 2001
+From: Ram Chandra Jangir <rjangir at codeaurora.org>
+Date: Thu, 20 Apr 2017 10:23:00 +0530
+Subject: [PATCH] qcom: mtd: nand: Added bam transaction and support
+ additional CSRs
+
+This patch adds the following for NAND BAM DMA support
+ - Bam transaction which will be used for any NAND request.
+ It contains the array of command elements, command and
+ data sgl. This transaction will be resetted before every
+ request.
+ - Allocation function for NAND BAM transaction which will be
+ called only once at probe time.
+ - Reset function for NAND BAM transaction which will be called
+ before any new NAND request.
+ - Add support for additional CSRs.
+ NAND_READ_LOCATION - page offset for reading in BAM DMA mode
+ NAND_ERASED_CW_DETECT_CFG - status for erased code words
+ NAND_BUFFER_STATUS - status for ECC
+
+Signed-off-by: Abhishek Sahu <absahu at codeaurora.org>
+Signed-off-by: Ram Chandra Jangir <rjangir at codeaurora.org>
+---
+ drivers/mtd/nand/qcom_nandc.c | 631 +++++++++++++++++++++++++++++++++++----
+ include/linux/dma/qcom_bam_dma.h | 149 +++++++++
+ 2 files changed, 721 insertions(+), 59 deletions(-)
+ create mode 100644 include/linux/dma/qcom_bam_dma.h
+
+diff --git a/drivers/mtd/nand/qcom_nandc.c b/drivers/mtd/nand/qcom_nandc.c
+index 76a0ffc..9d941e3 100644
+--- a/drivers/mtd/nand/qcom_nandc.c
++++ b/drivers/mtd/nand/qcom_nandc.c
+@@ -22,6 +22,7 @@
+ #include <linux/of.h>
+ #include <linux/of_device.h>
+ #include <linux/delay.h>
++#include <linux/dma/qcom_bam_dma.h>
+
+ /* NANDc reg offsets */
+ #define NAND_FLASH_CMD 0x00
+@@ -53,6 +54,8 @@
+ #define NAND_VERSION 0xf08
+ #define NAND_READ_LOCATION_0 0xf20
+ #define NAND_READ_LOCATION_1 0xf24
++#define NAND_READ_LOCATION_2 0xf28
++#define NAND_READ_LOCATION_3 0xf2c
+
+ /* dummy register offsets, used by write_reg_dma */
+ #define NAND_DEV_CMD1_RESTORE 0xdead
+@@ -131,6 +134,11 @@
+ #define ERASED_PAGE (PAGE_ALL_ERASED | PAGE_ERASED)
+ #define ERASED_CW (CODEWORD_ALL_ERASED | CODEWORD_ERASED)
+
++/* NAND_READ_LOCATION_n bits */
++#define READ_LOCATION_OFFSET 0
++#define READ_LOCATION_SIZE 16
++#define READ_LOCATION_LAST 31
++
+ /* Version Mask */
+ #define NAND_VERSION_MAJOR_MASK 0xf0000000
+ #define NAND_VERSION_MAJOR_SHIFT 28
+@@ -148,6 +156,9 @@
+ #define FETCH_ID 0xb
+ #define RESET_DEVICE 0xd
+
++/* NAND_CTRL bits */
++#define BAM_MODE_EN BIT(0)
++
+ /*
+ * the NAND controller performs reads/writes with ECC in 516 byte chunks.
+ * the driver calls the chunks 'step' or 'codeword' interchangeably
+@@ -169,12 +180,77 @@
+ #define ECC_BCH_4BIT BIT(2)
+ #define ECC_BCH_8BIT BIT(3)
+
++/* Flags used for BAM DMA desc preparation*/
++/* Don't set the EOT in current tx sgl */
++#define DMA_DESC_FLAG_NO_EOT (0x0001)
++/* Set the NWD flag in current sgl */
++#define DMA_DESC_FLAG_BAM_NWD (0x0002)
++/* Close current sgl and start writing in another sgl */
++#define DMA_DESC_FLAG_BAM_NEXT_SGL (0x0004)
++/*
++ * Erased codeword status is being used two times in single transfer so this
++ * flag will determine the current value of erased codeword status register
++ */
++#define DMA_DESC_ERASED_CW_SET (0x0008)
++
++/* Returns the dma address for reg read buffer */
++#define REG_BUF_DMA_ADDR(chip, vaddr) \
++ ((chip)->reg_read_buf_phys + \
++ ((uint8_t *)(vaddr) - (uint8_t *)(chip)->reg_read_buf))
++
++/* Returns the nand register physical address */
++#define NAND_REG_PHYS_ADDRESS(chip, addr) \
++ ((chip)->base_dma + (addr))
++
++/* command element array size in bam transaction */
++#define BAM_CMD_ELEMENT_SIZE (256)
++/* command sgl size in bam transaction */
++#define BAM_CMD_SGL_SIZE (256)
++/* data sgl size in bam transaction */
++#define BAM_DATA_SGL_SIZE (128)
++
++/*
++ * This data type corresponds to the BAM transaction which will be used for any
++ * nand request.
++ * @bam_ce - the array of bam command elements
++ * @cmd_sgl - sgl for nand bam command pipe
++ * @tx_sgl - sgl for nand bam consumer pipe
++ * @rx_sgl - sgl for nand bam producer pipe
++ * @bam_ce_index - the index in bam_ce which is available for next sgl request
++ * @pre_bam_ce_index - the index in bam_ce which marks the start position ce
++ * for current sgl. It will be used for size calculation
++ * for current sgl
++ * @cmd_sgl_cnt - no of entries in command sgl.
++ * @tx_sgl_cnt - no of entries in tx sgl.
++ * @rx_sgl_cnt - no of entries in rx sgl.
++ */
++struct bam_transaction {
++ struct bam_cmd_element bam_ce[BAM_CMD_ELEMENT_SIZE];
++ struct qcom_bam_sgl cmd_sgl[BAM_CMD_SGL_SIZE];
++ struct qcom_bam_sgl tx_sgl[BAM_DATA_SGL_SIZE];
++ struct qcom_bam_sgl rx_sgl[BAM_DATA_SGL_SIZE];
++ uint32_t bam_ce_index;
++ uint32_t pre_bam_ce_index;
++ uint32_t cmd_sgl_cnt;
++ uint32_t tx_sgl_cnt;
++ uint32_t rx_sgl_cnt;
++};
++
++/**
++ * This data type corresponds to the nand dma descriptor
++ * @list - list for desc_info
++ * @dir - DMA transfer direction
++ * @sgl - sgl which will be used for single sgl dma descriptor
++ * @dma_desc - low level dma engine descriptor
++ * @bam_desc_data - used for bam desc mappings
++ */
+ struct desc_info {
+ struct list_head node;
+
+ enum dma_data_direction dir;
+ struct scatterlist sgl;
+ struct dma_async_tx_descriptor *dma_desc;
++ struct qcom_bam_custom_data bam_desc_data;
+ };
+
+ /*
+@@ -202,6 +278,13 @@ struct nandc_regs {
+ __le32 orig_vld;
+
+ __le32 ecc_buf_cfg;
++ __le32 read_location0;
++ __le32 read_location1;
++ __le32 read_location2;
++ __le32 read_location3;
++
++ __le32 erased_cw_detect_cfg_clr;
++ __le32 erased_cw_detect_cfg_set;
+ };
+
+ /*
+@@ -217,6 +300,7 @@ struct nandc_regs {
+ * @aon_clk: another controller clock
+ *
+ * @chan: dma channel
++ * @bam_txn: contains the bam transaction address
+ * @cmd_crci: ADM DMA CRCI for command flow control
+ * @data_crci: ADM DMA CRCI for data flow control
+ * @desc_list: DMA descriptor list (list of desc_infos)
+@@ -242,6 +326,7 @@ struct nandc_regs {
+ struct qcom_nand_controller {
+ struct nand_hw_control controller;
+ struct list_head host_list;
++ struct bam_transaction *bam_txn;
+
+ struct device *dev;
+
+@@ -342,6 +427,45 @@ struct qcom_nand_driver_data {
+ bool dma_bam_enabled;
+ };
+
++/* Allocates and Initializes the BAM transaction */
++struct bam_transaction *alloc_bam_transaction(
++ struct qcom_nand_controller *nandc)
++{
++ struct bam_transaction *bam_txn;
++
++ bam_txn = kzalloc(sizeof(*bam_txn), GFP_KERNEL);
++
++ if (!bam_txn)
++ return NULL;
++
++ bam_txn->bam_ce_index = 0;
++ bam_txn->pre_bam_ce_index = 0;
++ bam_txn->cmd_sgl_cnt = 0;
++ bam_txn->tx_sgl_cnt = 0;
++ bam_txn->rx_sgl_cnt = 0;
++
++ qcom_bam_sg_init_table(bam_txn->cmd_sgl, BAM_CMD_SGL_SIZE);
++ qcom_bam_sg_init_table(bam_txn->tx_sgl, BAM_DATA_SGL_SIZE);
++ qcom_bam_sg_init_table(bam_txn->rx_sgl, BAM_DATA_SGL_SIZE);
++
++ return bam_txn;
++}
++
++/* Clears the BAM transaction index */
++void clear_bam_transaction(struct qcom_nand_controller *nandc)
++{
++ struct bam_transaction *bam_txn = nandc->bam_txn;
++
++ if (!nandc->dma_bam_enabled)
++ return;
++
++ bam_txn->bam_ce_index = 0;
++ bam_txn->pre_bam_ce_index = 0;
++ bam_txn->cmd_sgl_cnt = 0;
++ bam_txn->tx_sgl_cnt = 0;
++ bam_txn->rx_sgl_cnt = 0;
++}
++
+ static inline struct qcom_nand_host *to_qcom_nand_host(struct nand_chip *chip)
+ {
+ return container_of(chip, struct qcom_nand_host, chip);
+@@ -398,6 +522,16 @@ static __le32 *offset_to_nandc_reg(struct nandc_regs *regs, int offset)
+ return ®s->orig_vld;
+ case NAND_EBI2_ECC_BUF_CFG:
+ return ®s->ecc_buf_cfg;
++ case NAND_BUFFER_STATUS:
++ return ®s->clrreadstatus;
++ case NAND_READ_LOCATION_0:
++ return ®s->read_location0;
++ case NAND_READ_LOCATION_1:
++ return ®s->read_location1;
++ case NAND_READ_LOCATION_2:
++ return ®s->read_location2;
++ case NAND_READ_LOCATION_3:
++ return ®s->read_location3;
+ default:
+ return NULL;
+ }
+@@ -439,7 +573,7 @@ static void update_rw_regs(struct qcom_nand_host *host, int num_cw, bool read)
+ {
+ struct nand_chip *chip = &host->chip;
+ struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+- u32 cmd, cfg0, cfg1, ecc_bch_cfg;
++ u32 cmd, cfg0, cfg1, ecc_bch_cfg, read_location0;
+
+ if (read) {
+ if (host->use_ecc)
+@@ -456,12 +590,20 @@ static void update_rw_regs(struct qcom_nand_host *host, int num_cw, bool read)
+
+ cfg1 = host->cfg1;
+ ecc_bch_cfg = host->ecc_bch_cfg;
++ if (read)
++ read_location0 = (0 << READ_LOCATION_OFFSET) |
++ (host->cw_data << READ_LOCATION_SIZE) |
++ (1 << READ_LOCATION_LAST);
+ } else {
+ cfg0 = (host->cfg0_raw & ~(7U << CW_PER_PAGE)) |
+ (num_cw - 1) << CW_PER_PAGE;
+
+ cfg1 = host->cfg1_raw;
+ ecc_bch_cfg = 1 << ECC_CFG_ECC_DISABLE;
++ if (read)
++ read_location0 = (0 << READ_LOCATION_OFFSET) |
++ (host->cw_size << READ_LOCATION_SIZE) |
++ (1 << READ_LOCATION_LAST);
+ }
+
+ nandc_set_reg(nandc, NAND_FLASH_CMD, cmd);
+@@ -472,8 +614,104 @@ static void update_rw_regs(struct qcom_nand_host *host, int num_cw, bool read)
+ nandc_set_reg(nandc, NAND_FLASH_STATUS, host->clrflashstatus);
+ nandc_set_reg(nandc, NAND_READ_STATUS, host->clrreadstatus);
+ nandc_set_reg(nandc, NAND_EXEC_CMD, 1);
++
++ if (read)
++ nandc_set_reg(nandc, NAND_READ_LOCATION_0, read_location0);
+ }
+
++/*
++ * Prepares the command descriptor for BAM DMA which will be used for NAND
++ * register read and write. The command descriptor requires the command
++ * to be formed in command element type so this function uses the command
++ * element from bam transaction ce array and fills the same with required
++ * data. A single SGL can contain multiple command elements so
++ * DMA_DESC_FLAG_BAM_NEXT_SGL will be used for starting the separate SGL
++ * after the current command element.
++ */
++static int prep_dma_desc_command(struct qcom_nand_controller *nandc, bool read,
++ int reg_off, const void *vaddr,
++ int size, unsigned int flags)
++{
++ int bam_ce_size;
++ int i;
++ struct bam_cmd_element *bam_ce_buffer;
++ struct bam_transaction *bam_txn = nandc->bam_txn;
++
++ bam_ce_buffer = &bam_txn->bam_ce[bam_txn->bam_ce_index];
++
++ /* fill the command desc */
++ for (i = 0; i < size; i++) {
++ if (read) {
++ qcom_prep_bam_ce(&bam_ce_buffer[i],
++ NAND_REG_PHYS_ADDRESS(nandc, reg_off + 4 * i),
++ BAM_READ_COMMAND,
++ REG_BUF_DMA_ADDR(nandc,
++ (unsigned int *)vaddr + i));
++ } else {
++ qcom_prep_bam_ce(&bam_ce_buffer[i],
++ NAND_REG_PHYS_ADDRESS(nandc, reg_off + 4 * i),
++ BAM_WRITE_COMMAND,
++ *((unsigned int *)vaddr + i));
++ }
++ }
++
++ /* use the separate sgl after this command */
++ if (flags & DMA_DESC_FLAG_BAM_NEXT_SGL) {
++ bam_ce_buffer = &bam_txn->bam_ce[bam_txn->pre_bam_ce_index];
++ bam_txn->bam_ce_index += size;
++ bam_ce_size = (bam_txn->bam_ce_index -
++ bam_txn->pre_bam_ce_index) *
++ sizeof(struct bam_cmd_element);
++ sg_set_buf(&bam_txn->cmd_sgl[bam_txn->cmd_sgl_cnt].sgl,
++ bam_ce_buffer,
++ bam_ce_size);
++ if (flags & DMA_DESC_FLAG_BAM_NWD)
++ bam_txn->cmd_sgl[bam_txn->cmd_sgl_cnt].dma_flags =
++ DESC_FLAG_NWD | DESC_FLAG_CMD;
++ else
++ bam_txn->cmd_sgl[bam_txn->cmd_sgl_cnt].dma_flags =
++ DESC_FLAG_CMD;
++
++ bam_txn->cmd_sgl_cnt++;
++ bam_txn->pre_bam_ce_index = bam_txn->bam_ce_index;
++ } else {
++ bam_txn->bam_ce_index += size;
++ }
++
++ return 0;
++}
++
++/*
++ * Prepares the data descriptor for BAM DMA which will be used for NAND
++ * data read and write.
++ */
++static int prep_dma_desc_data_bam(struct qcom_nand_controller *nandc, bool read,
++ int reg_off, const void *vaddr,
++ int size, unsigned int flags)
++{
++ struct bam_transaction *bam_txn = nandc->bam_txn;
++
++ if (read) {
++ sg_set_buf(&bam_txn->rx_sgl[bam_txn->rx_sgl_cnt].sgl,
++ vaddr, size);
++ bam_txn->rx_sgl[bam_txn->rx_sgl_cnt].dma_flags = 0;
++ bam_txn->rx_sgl_cnt++;
++ } else {
++ sg_set_buf(&bam_txn->tx_sgl[bam_txn->tx_sgl_cnt].sgl,
++ vaddr, size);
++ if (flags & DMA_DESC_FLAG_NO_EOT)
++ bam_txn->tx_sgl[bam_txn->tx_sgl_cnt].dma_flags = 0;
++ else
++ bam_txn->tx_sgl[bam_txn->tx_sgl_cnt].dma_flags =
++ DESC_FLAG_EOT;
++
++ bam_txn->tx_sgl_cnt++;
++ }
++
++ return 0;
++}
++
++/* Prepares the dma desciptor for adm dma engine */
+ static int prep_dma_desc(struct qcom_nand_controller *nandc, bool read,
+ int reg_off, const void *vaddr, int size,
+ bool flow_control)
+@@ -552,7 +790,7 @@ static int prep_dma_desc(struct qcom_nand_controller *nandc, bool read,
+ * @num_regs: number of registers to read
+ */
+ static int read_reg_dma(struct qcom_nand_controller *nandc, int first,
+- int num_regs)
++ int num_regs, unsigned int flags)
+ {
+ bool flow_control = false;
+ void *vaddr;
+@@ -561,10 +799,18 @@ static int read_reg_dma(struct qcom_nand_controller *nandc, int first,
+ if (first == NAND_READ_ID || first == NAND_FLASH_STATUS)
+ flow_control = true;
+
+- size = num_regs * sizeof(u32);
+ vaddr = nandc->reg_read_buf + nandc->reg_read_pos;
+ nandc->reg_read_pos += num_regs;
+
++ if (nandc->dma_bam_enabled) {
++ size = num_regs;
++
++ return prep_dma_desc_command(nandc, true, first, vaddr, size,
++ flags);
++ }
++
++ size = num_regs * sizeof(u32);
++
+ return prep_dma_desc(nandc, true, first, vaddr, size, flow_control);
+ }
+
+@@ -576,7 +822,7 @@ static int read_reg_dma(struct qcom_nand_controller *nandc, int first,
+ * @num_regs: number of registers to write
+ */
+ static int write_reg_dma(struct qcom_nand_controller *nandc, int first,
+- int num_regs)
++ int num_regs, unsigned int flags)
+ {
+ bool flow_control = false;
+ struct nandc_regs *regs = nandc->regs;
+@@ -588,12 +834,29 @@ static int write_reg_dma(struct qcom_nand_controller *nandc, int first,
+ if (first == NAND_FLASH_CMD)
+ flow_control = true;
+
++ if (first == NAND_ERASED_CW_DETECT_CFG) {
++ if (flags & DMA_DESC_ERASED_CW_SET)
++ vaddr = ®s->erased_cw_detect_cfg_set;
++ else
++ vaddr = ®s->erased_cw_detect_cfg_clr;
++ }
++
++ if (first == NAND_EXEC_CMD)
++ flags |= DMA_DESC_FLAG_BAM_NWD;
++
+ if (first == NAND_DEV_CMD1_RESTORE)
+ first = NAND_DEV_CMD1;
+
+ if (first == NAND_DEV_CMD_VLD_RESTORE)
+ first = NAND_DEV_CMD_VLD;
+
++ if (nandc->dma_bam_enabled) {
++ size = num_regs;
++
++ return prep_dma_desc_command(nandc, false, first, vaddr, size,
++ flags);
++ }
++
+ size = num_regs * sizeof(u32);
+
+ return prep_dma_desc(nandc, false, first, vaddr, size, flow_control);
+@@ -608,8 +871,12 @@ static int write_reg_dma(struct qcom_nand_controller *nandc, int first,
+ * @size: DMA transaction size in bytes
+ */
+ static int read_data_dma(struct qcom_nand_controller *nandc, int reg_off,
+- const u8 *vaddr, int size)
++ const u8 *vaddr, int size, unsigned int flags)
+ {
++ if (nandc->dma_bam_enabled)
++ return prep_dma_desc_data_bam(nandc, true, reg_off, vaddr, size,
++ flags);
++
+ return prep_dma_desc(nandc, true, reg_off, vaddr, size, false);
+ }
+
+@@ -622,8 +889,12 @@ static int read_data_dma(struct qcom_nand_controller *nandc, int reg_off,
+ * @size: DMA transaction size in bytes
+ */
+ static int write_data_dma(struct qcom_nand_controller *nandc, int reg_off,
+- const u8 *vaddr, int size)
++ const u8 *vaddr, int size, unsigned int flags)
+ {
++ if (nandc->dma_bam_enabled)
++ return prep_dma_desc_data_bam(nandc, false, reg_off, vaddr,
++ size, flags);
++
+ return prep_dma_desc(nandc, false, reg_off, vaddr, size, false);
+ }
+
+@@ -633,14 +904,57 @@ static int write_data_dma(struct qcom_nand_controller *nandc, int reg_off,
+ */
+ static void config_cw_read(struct qcom_nand_controller *nandc)
+ {
+- write_reg_dma(nandc, NAND_FLASH_CMD, 3);
+- write_reg_dma(nandc, NAND_DEV0_CFG0, 3);
+- write_reg_dma(nandc, NAND_EBI2_ECC_BUF_CFG, 1);
+
+- write_reg_dma(nandc, NAND_EXEC_CMD, 1);
++ write_reg_dma(nandc, NAND_FLASH_CMD, 3, 0);
++ write_reg_dma(nandc, NAND_DEV0_CFG0, 3, 0);
++ write_reg_dma(nandc, NAND_EBI2_ECC_BUF_CFG, 1, 0);
++
++ write_reg_dma(nandc, NAND_ERASED_CW_DETECT_CFG, 1, 0);
++ write_reg_dma(nandc, NAND_ERASED_CW_DETECT_CFG, 1,
++ DMA_DESC_ERASED_CW_SET);
++ if (nandc->dma_bam_enabled)
++ write_reg_dma(nandc, NAND_READ_LOCATION_0, 1,
++ DMA_DESC_FLAG_BAM_NEXT_SGL);
++
+
+- read_reg_dma(nandc, NAND_FLASH_STATUS, 2);
+- read_reg_dma(nandc, NAND_ERASED_CW_DETECT_STATUS, 1);
++ write_reg_dma(nandc, NAND_EXEC_CMD, 1, DMA_DESC_FLAG_BAM_NWD |
++ DMA_DESC_FLAG_BAM_NEXT_SGL);
++
++ read_reg_dma(nandc, NAND_FLASH_STATUS, 2, 0);
++ read_reg_dma(nandc, NAND_ERASED_CW_DETECT_STATUS, 1,
++ DMA_DESC_FLAG_BAM_NEXT_SGL);
++}
++
++/*
++ * Helpers to prepare DMA descriptors for configuring registers
++ * before reading a NAND page with BAM.
++ */
++static void config_bam_page_read(struct qcom_nand_controller *nandc)
++{
++ write_reg_dma(nandc, NAND_FLASH_CMD, 3, 0);
++ write_reg_dma(nandc, NAND_DEV0_CFG0, 3, 0);
++ write_reg_dma(nandc, NAND_EBI2_ECC_BUF_CFG, 1, 0);
++ write_reg_dma(nandc, NAND_ERASED_CW_DETECT_CFG, 1, 0);
++ write_reg_dma(nandc, NAND_ERASED_CW_DETECT_CFG, 1,
++ DMA_DESC_ERASED_CW_SET |
++ DMA_DESC_FLAG_BAM_NEXT_SGL);
++}
++
++/*
++ * Helpers to prepare DMA descriptors for configuring registers
++ * before reading each codeword in NAND page with BAM.
++ */
++static void config_bam_cw_read(struct qcom_nand_controller *nandc)
++{
++ if (nandc->dma_bam_enabled)
++ write_reg_dma(nandc, NAND_READ_LOCATION_0, 4, 0);
++
++ write_reg_dma(nandc, NAND_FLASH_CMD, 1, DMA_DESC_FLAG_BAM_NEXT_SGL);
++ write_reg_dma(nandc, NAND_EXEC_CMD, 1, DMA_DESC_FLAG_BAM_NEXT_SGL);
++
++ read_reg_dma(nandc, NAND_FLASH_STATUS, 2, 0);
++ read_reg_dma(nandc, NAND_ERASED_CW_DETECT_STATUS, 1,
++ DMA_DESC_FLAG_BAM_NEXT_SGL);
+ }
+
+ /*
+@@ -649,19 +963,20 @@ static void config_cw_read(struct qcom_nand_controller *nandc)
+ */
+ static void config_cw_write_pre(struct qcom_nand_controller *nandc)
+ {
+- write_reg_dma(nandc, NAND_FLASH_CMD, 3);
+- write_reg_dma(nandc, NAND_DEV0_CFG0, 3);
+- write_reg_dma(nandc, NAND_EBI2_ECC_BUF_CFG, 1);
++ write_reg_dma(nandc, NAND_FLASH_CMD, 3, 0);
++ write_reg_dma(nandc, NAND_DEV0_CFG0, 3, 0);
++ write_reg_dma(nandc, NAND_EBI2_ECC_BUF_CFG, 1,
++ DMA_DESC_FLAG_BAM_NEXT_SGL);
+ }
+
+ static void config_cw_write_post(struct qcom_nand_controller *nandc)
+ {
+- write_reg_dma(nandc, NAND_EXEC_CMD, 1);
++ write_reg_dma(nandc, NAND_EXEC_CMD, 1, DMA_DESC_FLAG_BAM_NEXT_SGL);
+
+- read_reg_dma(nandc, NAND_FLASH_STATUS, 1);
++ read_reg_dma(nandc, NAND_FLASH_STATUS, 1, DMA_DESC_FLAG_BAM_NEXT_SGL);
+
+- write_reg_dma(nandc, NAND_FLASH_STATUS, 1);
+- write_reg_dma(nandc, NAND_READ_STATUS, 1);
++ write_reg_dma(nandc, NAND_FLASH_STATUS, 1, 0);
++ write_reg_dma(nandc, NAND_READ_STATUS, 1, DMA_DESC_FLAG_BAM_NEXT_SGL);
+ }
+
+ /*
+@@ -675,6 +990,8 @@ static int nandc_param(struct qcom_nand_host *host)
+ struct nand_chip *chip = &host->chip;
+ struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+
++ clear_bam_transaction(nandc);
++
+ /*
+ * NAND_CMD_PARAM is called before we know much about the FLASH chip
+ * in use. we configure the controller to perform a raw read of 512
+@@ -708,9 +1025,13 @@ static int nandc_param(struct qcom_nand_host *host)
+
+ nandc_set_reg(nandc, NAND_DEV_CMD1_RESTORE, nandc->cmd1);
+ nandc_set_reg(nandc, NAND_DEV_CMD_VLD_RESTORE, nandc->vld);
++ nandc_set_reg(nandc, NAND_READ_LOCATION_0,
++ (0 << READ_LOCATION_OFFSET) |
++ (512 << READ_LOCATION_SIZE) |
++ (1 << READ_LOCATION_LAST));
+
+- write_reg_dma(nandc, NAND_DEV_CMD_VLD, 1);
+- write_reg_dma(nandc, NAND_DEV_CMD1, 1);
++ write_reg_dma(nandc, NAND_DEV_CMD_VLD, 1, 0);
++ write_reg_dma(nandc, NAND_DEV_CMD1, 1, DMA_DESC_FLAG_BAM_NEXT_SGL);
+
+ nandc->buf_count = 512;
+ memset(nandc->data_buffer, 0xff, nandc->buf_count);
+@@ -718,11 +1039,12 @@ static int nandc_param(struct qcom_nand_host *host)
+ config_cw_read(nandc);
+
+ read_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer,
+- nandc->buf_count);
++ nandc->buf_count, 0);
+
+ /* restore CMD1 and VLD regs */
+- write_reg_dma(nandc, NAND_DEV_CMD1_RESTORE, 1);
+- write_reg_dma(nandc, NAND_DEV_CMD_VLD_RESTORE, 1);
++ write_reg_dma(nandc, NAND_DEV_CMD1_RESTORE, 1, 0);
++ write_reg_dma(nandc, NAND_DEV_CMD_VLD_RESTORE, 1,
++ DMA_DESC_FLAG_BAM_NEXT_SGL);
+
+ return 0;
+ }
+@@ -733,6 +1055,8 @@ static int erase_block(struct qcom_nand_host *host, int page_addr)
+ struct nand_chip *chip = &host->chip;
+ struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+
++ clear_bam_transaction(nandc);
++
+ nandc_set_reg(nandc, NAND_FLASH_CMD,
+ BLOCK_ERASE | PAGE_ACC | LAST_PAGE);
+ nandc_set_reg(nandc, NAND_ADDR0, page_addr);
+@@ -744,14 +1068,15 @@ static int erase_block(struct qcom_nand_host *host, int page_addr)
+ nandc_set_reg(nandc, NAND_FLASH_STATUS, host->clrflashstatus);
+ nandc_set_reg(nandc, NAND_READ_STATUS, host->clrreadstatus);
+
+- write_reg_dma(nandc, NAND_FLASH_CMD, 3);
+- write_reg_dma(nandc, NAND_DEV0_CFG0, 2);
+- write_reg_dma(nandc, NAND_EXEC_CMD, 1);
+
+- read_reg_dma(nandc, NAND_FLASH_STATUS, 1);
++ write_reg_dma(nandc, NAND_FLASH_CMD, 3, DMA_DESC_FLAG_BAM_NEXT_SGL);
++ write_reg_dma(nandc, NAND_DEV0_CFG0, 2, DMA_DESC_FLAG_BAM_NEXT_SGL);
++ write_reg_dma(nandc, NAND_EXEC_CMD, 1, DMA_DESC_FLAG_BAM_NEXT_SGL);
+
+- write_reg_dma(nandc, NAND_FLASH_STATUS, 1);
+- write_reg_dma(nandc, NAND_READ_STATUS, 1);
++ read_reg_dma(nandc, NAND_FLASH_STATUS, 1, DMA_DESC_FLAG_BAM_NEXT_SGL);
++
++ write_reg_dma(nandc, NAND_FLASH_STATUS, 1, 0);
++ write_reg_dma(nandc, NAND_READ_STATUS, 1, DMA_DESC_FLAG_BAM_NEXT_SGL);
+
+ return 0;
+ }
+@@ -765,16 +1090,19 @@ static int read_id(struct qcom_nand_host *host, int column)
+ if (column == -1)
+ return 0;
+
++ clear_bam_transaction(nandc);
++
+ nandc_set_reg(nandc, NAND_FLASH_CMD, FETCH_ID);
+ nandc_set_reg(nandc, NAND_ADDR0, column);
+ nandc_set_reg(nandc, NAND_ADDR1, 0);
+- nandc_set_reg(nandc, NAND_FLASH_CHIP_SELECT, DM_EN);
++ nandc_set_reg(nandc, NAND_FLASH_CHIP_SELECT,
++ nandc->dma_bam_enabled ? 0 : DM_EN);
+ nandc_set_reg(nandc, NAND_EXEC_CMD, 1);
+
+- write_reg_dma(nandc, NAND_FLASH_CMD, 4);
+- write_reg_dma(nandc, NAND_EXEC_CMD, 1);
++ write_reg_dma(nandc, NAND_FLASH_CMD, 4, DMA_DESC_FLAG_BAM_NEXT_SGL);
++ write_reg_dma(nandc, NAND_EXEC_CMD, 1, DMA_DESC_FLAG_BAM_NEXT_SGL);
+
+- read_reg_dma(nandc, NAND_READ_ID, 1);
++ read_reg_dma(nandc, NAND_READ_ID, 1, DMA_DESC_FLAG_BAM_NEXT_SGL);
+
+ return 0;
+ }
+@@ -785,15 +1113,61 @@ static int reset(struct qcom_nand_host *host)
+ struct nand_chip *chip = &host->chip;
+ struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+
++ clear_bam_transaction(nandc);
++
+ nandc_set_reg(nandc, NAND_FLASH_CMD, RESET_DEVICE);
+ nandc_set_reg(nandc, NAND_EXEC_CMD, 1);
+
+- write_reg_dma(nandc, NAND_FLASH_CMD, 1);
+- write_reg_dma(nandc, NAND_EXEC_CMD, 1);
++ write_reg_dma(nandc, NAND_FLASH_CMD, 1, DMA_DESC_FLAG_BAM_NEXT_SGL);
++ write_reg_dma(nandc, NAND_EXEC_CMD, 1, DMA_DESC_FLAG_BAM_NEXT_SGL);
++
++ read_reg_dma(nandc, NAND_FLASH_STATUS, 1, DMA_DESC_FLAG_BAM_NEXT_SGL);
++
++ return 0;
++}
++
++static int prepare_bam_async_desc(struct qcom_nand_controller *nandc,
++ struct dma_chan *chan,
++ struct qcom_bam_sgl *bam_sgl,
++ int sgl_cnt,
++ enum dma_transfer_direction direction)
++{
++ struct desc_info *desc;
++ struct dma_async_tx_descriptor *dma_desc;
++
++ if (!qcom_bam_map_sg(nandc->dev, bam_sgl, sgl_cnt, direction)) {
++ dev_err(nandc->dev, "failure in mapping sgl\n");
++ return -ENOMEM;
++ }
++
++ desc = kzalloc(sizeof(*desc), GFP_KERNEL);
++ if (!desc) {
++ qcom_bam_unmap_sg(nandc->dev, bam_sgl, sgl_cnt, direction);
++ return -ENOMEM;
++ }
++
++
++ desc->bam_desc_data.dir = direction;
++ desc->bam_desc_data.sgl_cnt = sgl_cnt;
++ desc->bam_desc_data.bam_sgl = bam_sgl;
++
++ dma_desc = dmaengine_prep_dma_custom_mapping(chan,
++ &desc->bam_desc_data,
++ 0);
++
++ if (!dma_desc) {
++ dev_err(nandc->dev, "failure in cmd prep desc\n");
++ qcom_bam_unmap_sg(nandc->dev, bam_sgl, sgl_cnt, direction);
++ kfree(desc);
++ return -EINVAL;
++ }
++
++ desc->dma_desc = dma_desc;
+
+- read_reg_dma(nandc, NAND_FLASH_STATUS, 1);
++ list_add_tail(&desc->node, &nandc->desc_list);
+
+ return 0;
++
+ }
+
+ /* helpers to submit/free our list of dma descriptors */
+@@ -801,12 +1175,46 @@ static int submit_descs(struct qcom_nand_controller *nandc)
+ {
+ struct desc_info *desc;
+ dma_cookie_t cookie = 0;
++ struct bam_transaction *bam_txn = nandc->bam_txn;
++ int r;
++
++ if (nandc->dma_bam_enabled) {
++ if (bam_txn->rx_sgl_cnt) {
++ r = prepare_bam_async_desc(nandc, nandc->rx_chan,
++ bam_txn->rx_sgl, bam_txn->rx_sgl_cnt,
++ DMA_DEV_TO_MEM);
++ if (r)
++ return r;
++ }
++
++ if (bam_txn->tx_sgl_cnt) {
++ r = prepare_bam_async_desc(nandc, nandc->tx_chan,
++ bam_txn->tx_sgl, bam_txn->tx_sgl_cnt,
++ DMA_MEM_TO_DEV);
++ if (r)
++ return r;
++ }
++
++ r = prepare_bam_async_desc(nandc, nandc->cmd_chan,
++ bam_txn->cmd_sgl, bam_txn->cmd_sgl_cnt,
++ DMA_MEM_TO_DEV);
++ if (r)
++ return r;
++ }
+
+ list_for_each_entry(desc, &nandc->desc_list, node)
+ cookie = dmaengine_submit(desc->dma_desc);
+
+- if (dma_sync_wait(nandc->chan, cookie) != DMA_COMPLETE)
+- return -ETIMEDOUT;
++ if (nandc->dma_bam_enabled) {
++ dma_async_issue_pending(nandc->tx_chan);
++ dma_async_issue_pending(nandc->rx_chan);
++
++ if (dma_sync_wait(nandc->cmd_chan, cookie) != DMA_COMPLETE)
++ return -ETIMEDOUT;
++ } else {
++ if (dma_sync_wait(nandc->chan, cookie) != DMA_COMPLETE)
++ return -ETIMEDOUT;
++ }
+
+ return 0;
+ }
+@@ -817,7 +1225,16 @@ static void free_descs(struct qcom_nand_controller *nandc)
+
+ list_for_each_entry_safe(desc, n, &nandc->desc_list, node) {
+ list_del(&desc->node);
+- dma_unmap_sg(nandc->dev, &desc->sgl, 1, desc->dir);
++
++ if (nandc->dma_bam_enabled)
++ qcom_bam_unmap_sg(nandc->dev,
++ desc->bam_desc_data.bam_sgl,
++ desc->bam_desc_data.sgl_cnt,
++ desc->bam_desc_data.dir);
++ else
++ dma_unmap_sg(nandc->dev, &desc->sgl, 1,
++ desc->dir);
++
+ kfree(desc);
+ }
+ }
+@@ -1128,6 +1545,9 @@ static int read_page_ecc(struct qcom_nand_host *host, u8 *data_buf,
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+ int i, ret;
+
++ if (nandc->dma_bam_enabled)
++ config_bam_page_read(nandc);
++
+ /* queue cmd descs for each codeword */
+ for (i = 0; i < ecc->steps; i++) {
+ int data_size, oob_size;
+@@ -1141,11 +1561,36 @@ static int read_page_ecc(struct qcom_nand_host *host, u8 *data_buf,
+ oob_size = host->ecc_bytes_hw + host->spare_bytes;
+ }
+
+- config_cw_read(nandc);
++ if (nandc->dma_bam_enabled) {
++ if (data_buf && oob_buf) {
++ nandc_set_reg(nandc, NAND_READ_LOCATION_0,
++ (0 << READ_LOCATION_OFFSET) |
++ (data_size << READ_LOCATION_SIZE) |
++ (0 << READ_LOCATION_LAST));
++ nandc_set_reg(nandc, NAND_READ_LOCATION_1,
++ (data_size << READ_LOCATION_OFFSET) |
++ (oob_size << READ_LOCATION_SIZE) |
++ (1 << READ_LOCATION_LAST));
++ } else if (data_buf) {
++ nandc_set_reg(nandc, NAND_READ_LOCATION_0,
++ (0 << READ_LOCATION_OFFSET) |
++ (data_size << READ_LOCATION_SIZE) |
++ (1 << READ_LOCATION_LAST));
++ } else {
++ nandc_set_reg(nandc, NAND_READ_LOCATION_0,
++ (data_size << READ_LOCATION_OFFSET) |
++ (oob_size << READ_LOCATION_SIZE) |
++ (1 << READ_LOCATION_LAST));
++ }
++
++ config_bam_cw_read(nandc);
++ } else {
++ config_cw_read(nandc);
++ }
+
+ if (data_buf)
+ read_data_dma(nandc, FLASH_BUF_ACC, data_buf,
+- data_size);
++ data_size, 0);
+
+ /*
+ * when ecc is enabled, the controller doesn't read the real
+@@ -1161,7 +1606,7 @@ static int read_page_ecc(struct qcom_nand_host *host, u8 *data_buf,
+ *oob_buf++ = 0xff;
+
+ read_data_dma(nandc, FLASH_BUF_ACC + data_size,
+- oob_buf, oob_size);
++ oob_buf, oob_size, 0);
+ }
+
+ if (data_buf)
+@@ -1200,10 +1645,14 @@ static int copy_last_cw(struct qcom_nand_host *host, int page)
+
+ set_address(host, host->cw_size * (ecc->steps - 1), page);
+ update_rw_regs(host, 1, true);
++ nandc_set_reg(nandc, NAND_READ_LOCATION_0,
++ (0 << READ_LOCATION_OFFSET) |
++ (size << READ_LOCATION_SIZE) |
++ (1 << READ_LOCATION_LAST));
+
+ config_cw_read(nandc);
+
+- read_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer, size);
++ read_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer, size, 0);
+
+ ret = submit_descs(nandc);
+ if (ret)
+@@ -1226,6 +1675,7 @@ static int qcom_nandc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
+ data_buf = buf;
+ oob_buf = oob_required ? chip->oob_poi : NULL;
+
++ clear_bam_transaction(nandc);
+ ret = read_page_ecc(host, data_buf, oob_buf);
+ if (ret) {
+ dev_err(nandc->dev, "failure to read page\n");
+@@ -1245,13 +1695,19 @@ static int qcom_nandc_read_page_raw(struct mtd_info *mtd,
+ u8 *data_buf, *oob_buf;
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+ int i, ret;
++ int read_location;
+
+ data_buf = buf;
+ oob_buf = chip->oob_poi;
+
+ host->use_ecc = false;
++
++ clear_bam_transaction(nandc);
+ update_rw_regs(host, ecc->steps, true);
+
++ if (nandc->dma_bam_enabled)
++ config_bam_page_read(nandc);
++
+ for (i = 0; i < ecc->steps; i++) {
+ int data_size1, data_size2, oob_size1, oob_size2;
+ int reg_off = FLASH_BUF_ACC;
+@@ -1269,21 +1725,49 @@ static int qcom_nandc_read_page_raw(struct mtd_info *mtd,
+ oob_size2 = host->ecc_bytes_hw + host->spare_bytes;
+ }
+
+- config_cw_read(nandc);
++ if (nandc->dma_bam_enabled) {
++ read_location = 0;
++ nandc_set_reg(nandc, NAND_READ_LOCATION_0,
++ (read_location << READ_LOCATION_OFFSET) |
++ (data_size1 << READ_LOCATION_SIZE) |
++ (0 << READ_LOCATION_LAST));
++ read_location += data_size1;
++
++ nandc_set_reg(nandc, NAND_READ_LOCATION_1,
++ (read_location << READ_LOCATION_OFFSET) |
++ (oob_size1 << READ_LOCATION_SIZE) |
++ (0 << READ_LOCATION_LAST));
++ read_location += oob_size1;
++
++ nandc_set_reg(nandc, NAND_READ_LOCATION_2,
++ (read_location << READ_LOCATION_OFFSET) |
++ (data_size2 << READ_LOCATION_SIZE) |
++ (0 << READ_LOCATION_LAST));
++ read_location += data_size2;
++
++ nandc_set_reg(nandc, NAND_READ_LOCATION_3,
++ (read_location << READ_LOCATION_OFFSET) |
++ (oob_size2 << READ_LOCATION_SIZE) |
++ (1 << READ_LOCATION_LAST));
++
++ config_bam_cw_read(nandc);
++ } else {
++ config_cw_read(nandc);
++ }
+
+- read_data_dma(nandc, reg_off, data_buf, data_size1);
++ read_data_dma(nandc, reg_off, data_buf, data_size1, 0);
+ reg_off += data_size1;
+ data_buf += data_size1;
+
+- read_data_dma(nandc, reg_off, oob_buf, oob_size1);
++ read_data_dma(nandc, reg_off, oob_buf, oob_size1, 0);
+ reg_off += oob_size1;
+ oob_buf += oob_size1;
+
+- read_data_dma(nandc, reg_off, data_buf, data_size2);
++ read_data_dma(nandc, reg_off, data_buf, data_size2, 0);
+ reg_off += data_size2;
+ data_buf += data_size2;
+
+- read_data_dma(nandc, reg_off, oob_buf, oob_size2);
++ read_data_dma(nandc, reg_off, oob_buf, oob_size2, 0);
+ oob_buf += oob_size2;
+ }
+
+@@ -1306,6 +1790,7 @@ static int qcom_nandc_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
+ int ret;
+
+ clear_read_regs(nandc);
++ clear_bam_transaction(nandc);
+
+ host->use_ecc = true;
+ set_address(host, 0, page);
+@@ -1329,6 +1814,7 @@ static int qcom_nandc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
+ int i, ret;
+
+ clear_read_regs(nandc);
++ clear_bam_transaction(nandc);
+
+ data_buf = (u8 *)buf;
+ oob_buf = chip->oob_poi;
+@@ -1350,7 +1836,8 @@ static int qcom_nandc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
+
+ config_cw_write_pre(nandc);
+
+- write_data_dma(nandc, FLASH_BUF_ACC, data_buf, data_size);
++ write_data_dma(nandc, FLASH_BUF_ACC, data_buf, data_size,
++ i == (ecc->steps - 1) ? DMA_DESC_FLAG_NO_EOT : 0);
+
+ /*
+ * when ECC is enabled, we don't really need to write anything
+@@ -1363,7 +1850,7 @@ static int qcom_nandc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
+ oob_buf += host->bbm_size;
+
+ write_data_dma(nandc, FLASH_BUF_ACC + data_size,
+- oob_buf, oob_size);
++ oob_buf, oob_size, 0);
+ }
+
+ config_cw_write_post(nandc);
+@@ -1393,6 +1880,7 @@ static int qcom_nandc_write_page_raw(struct mtd_info *mtd,
+ int i, ret;
+
+ clear_read_regs(nandc);
++ clear_bam_transaction(nandc);
+
+ data_buf = (u8 *)buf;
+ oob_buf = chip->oob_poi;
+@@ -1419,19 +1907,22 @@ static int qcom_nandc_write_page_raw(struct mtd_info *mtd,
+
+ config_cw_write_pre(nandc);
+
+- write_data_dma(nandc, reg_off, data_buf, data_size1);
++ write_data_dma(nandc, reg_off, data_buf, data_size1,
++ DMA_DESC_FLAG_NO_EOT);
+ reg_off += data_size1;
+ data_buf += data_size1;
+
+- write_data_dma(nandc, reg_off, oob_buf, oob_size1);
++ write_data_dma(nandc, reg_off, oob_buf, oob_size1,
++ DMA_DESC_FLAG_NO_EOT);
+ reg_off += oob_size1;
+ oob_buf += oob_size1;
+
+- write_data_dma(nandc, reg_off, data_buf, data_size2);
++ write_data_dma(nandc, reg_off, data_buf, data_size2,
++ DMA_DESC_FLAG_NO_EOT);
+ reg_off += data_size2;
+ data_buf += data_size2;
+
+- write_data_dma(nandc, reg_off, oob_buf, oob_size2);
++ write_data_dma(nandc, reg_off, oob_buf, oob_size2, 0);
+ oob_buf += oob_size2;
+
+ config_cw_write_post(nandc);
+@@ -1467,6 +1958,7 @@ static int qcom_nandc_write_oob(struct mtd_info *mtd, struct nand_chip *chip,
+
+ host->use_ecc = true;
+
++ clear_bam_transaction(nandc);
+ ret = copy_last_cw(host, page);
+ if (ret)
+ return ret;
+@@ -1486,7 +1978,7 @@ static int qcom_nandc_write_oob(struct mtd_info *mtd, struct nand_chip *chip,
+
+ config_cw_write_pre(nandc);
+ write_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer,
+- data_size + oob_size);
++ data_size + oob_size, 0);
+ config_cw_write_post(nandc);
+
+ ret = submit_descs(nandc);
+@@ -1524,6 +2016,7 @@ static int qcom_nandc_block_bad(struct mtd_info *mtd, loff_t ofs)
+ */
+ host->use_ecc = false;
+
++ clear_bam_transaction(nandc);
+ ret = copy_last_cw(host, page);
+ if (ret)
+ goto err;
+@@ -1554,6 +2047,7 @@ static int qcom_nandc_block_markbad(struct mtd_info *mtd, loff_t ofs)
+ int page, ret, status = 0;
+
+ clear_read_regs(nandc);
++ clear_bam_transaction(nandc);
+
+ /*
+ * to mark the BBM as bad, we flash the entire last codeword with 0s.
+@@ -1570,7 +2064,8 @@ static int qcom_nandc_block_markbad(struct mtd_info *mtd, loff_t ofs)
+ update_rw_regs(host, 1, false);
+
+ config_cw_write_pre(nandc);
+- write_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer, host->cw_size);
++ write_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer,
++ host->cw_size, 0);
+ config_cw_write_post(nandc);
+
+ ret = submit_descs(nandc);
+@@ -1930,6 +2425,8 @@ static int qcom_nand_host_setup(struct qcom_nand_host *host)
+
+ host->clrflashstatus = FS_READY_BSY_N;
+ host->clrreadstatus = 0xc0;
++ nandc->regs->erased_cw_detect_cfg_clr = CLR_ERASED_PAGE_DET;
++ nandc->regs->erased_cw_detect_cfg_set = SET_ERASED_PAGE_DET;
+
+ dev_dbg(nandc->dev,
+ "cfg0 %x cfg1 %x ecc_buf_cfg %x ecc_bch cfg %x cw_size %d cw_data %d strength %d parity_bytes %d steps %d\n",
+@@ -2008,6 +2505,12 @@ static int qcom_nandc_alloc(struct qcom_nand_controller *nandc)
+ dev_err(nandc->dev, "failed to request cmd channel\n");
+ return -ENODEV;
+ }
++
++ nandc->bam_txn = alloc_bam_transaction(nandc);
++ if (!nandc->bam_txn) {
++ dev_err(nandc->dev, "failed to allocate bam transaction\n");
++ return -ENOMEM;
++ }
+ }
+
+ INIT_LIST_HEAD(&nandc->desc_list);
+@@ -2043,6 +2546,9 @@ static void qcom_nandc_unalloc(struct qcom_nand_controller *nandc)
+ devm_kfree(nandc->dev, nandc->reg_read_buf);
+ }
+
++ if (nandc->bam_txn)
++ devm_kfree(nandc->dev, nandc->bam_txn);
++
+ if (nandc->regs)
+ devm_kfree(nandc->dev, nandc->regs);
+
+@@ -2053,11 +2559,18 @@ static void qcom_nandc_unalloc(struct qcom_nand_controller *nandc)
+ /* one time setup of a few nand controller registers */
+ static int qcom_nandc_setup(struct qcom_nand_controller *nandc)
+ {
++ u32 nand_ctrl;
++
+ /* kill onenand */
+ nandc_write(nandc, SFLASHC_BURST_CFG, 0);
+
+- /* enable ADM DMA */
+- nandc_write(nandc, NAND_FLASH_CHIP_SELECT, DM_EN);
++ /* enable ADM or BAM DMA */
++ if (!nandc->dma_bam_enabled) {
++ nandc_write(nandc, NAND_FLASH_CHIP_SELECT, DM_EN);
++ } else {
++ nand_ctrl = nandc_read(nandc, NAND_CTRL);
++ nandc_write(nandc, NAND_CTRL, nand_ctrl | BAM_MODE_EN);
++ }
+
+ /* save the original values of these registers */
+ nandc->cmd1 = nandc_read(nandc, NAND_DEV_CMD1);
+diff --git a/include/linux/dma/qcom_bam_dma.h b/include/linux/dma/qcom_bam_dma.h
+new file mode 100644
+index 0000000..7e87a85
+--- /dev/null
++++ b/include/linux/dma/qcom_bam_dma.h
+@@ -0,0 +1,149 @@
++/*
++ * Copyright (c) 2017, The Linux Foundation. All rights reserved.
++ *
++ * Permission to use, copy, modify, and/or distribute this software for any
++ * purpose with or without fee is hereby granted, provided that the above
++ * copyright notice and this permission notice appear in all copies.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
++ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ */
++
++#ifndef _QCOM_BAM_DMA_H
++#define _QCOM_BAM_DMA_H
++
++#include <linux/dma-mapping.h>
++
++#define DESC_FLAG_INT BIT(15)
++#define DESC_FLAG_EOT BIT(14)
++#define DESC_FLAG_EOB BIT(13)
++#define DESC_FLAG_NWD BIT(12)
++#define DESC_FLAG_CMD BIT(11)
++
++/*
++ * QCOM BAM DMA SGL struct
++ *
++ * @sgl: DMA SGL
++ * @dma_flags: BAM DMA flags
++ */
++struct qcom_bam_sgl {
++ struct scatterlist sgl;
++ unsigned int dma_flags;
++};
++
++/*
++ * This data type corresponds to the native Command Element
++ * supported by BAM DMA Engine.
++ *
++ * @addr - register address.
++ * @command - command type.
++ * @data - for write command: content to be written into peripheral register.
++ * for read command: dest addr to write peripheral register value to.
++ * @mask - register mask.
++ * @reserved - for future usage.
++ *
++ */
++struct bam_cmd_element {
++ __le32 addr:24;
++ __le32 command:8;
++ __le32 data;
++ __le32 mask;
++ __le32 reserved;
++};
++
++/*
++ * This enum indicates the command type in a command element
++ */
++enum bam_command_type {
++ BAM_WRITE_COMMAND = 0,
++ BAM_READ_COMMAND,
++};
++
++/*
++ * qcom_bam_sg_init_table - Init QCOM BAM SGL
++ * @bam_sgl: bam sgl
++ * @nents: number of entries in bam sgl
++ *
++ * This function performs the initialization for each SGL in BAM SGL
++ * with generic SGL API.
++ */
++static inline void qcom_bam_sg_init_table(struct qcom_bam_sgl *bam_sgl,
++ unsigned int nents)
++{
++ int i;
++
++ for (i = 0; i < nents; i++)
++ sg_init_table(&bam_sgl[i].sgl, 1);
++}
++
++/*
++ * qcom_bam_unmap_sg - Unmap QCOM BAM SGL
++ * @dev: device for which unmapping needs to be done
++ * @bam_sgl: bam sgl
++ * @nents: number of entries in bam sgl
++ * @dir: dma transfer direction
++ *
++ * This function performs the DMA unmapping for each SGL in BAM SGL
++ * with generic SGL API.
++ */
++static inline void qcom_bam_unmap_sg(struct device *dev,
++ struct qcom_bam_sgl *bam_sgl, int nents, enum dma_data_direction dir)
++{
++ int i;
++
++ for (i = 0; i < nents; i++)
++ dma_unmap_sg(dev, &bam_sgl[i].sgl, 1, dir);
++}
++
++/*
++ * qcom_bam_map_sg - Map QCOM BAM SGL
++ * @dev: device for which mapping needs to be done
++ * @bam_sgl: bam sgl
++ * @nents: number of entries in bam sgl
++ * @dir: dma transfer direction
++ *
++ * This function performs the DMA mapping for each SGL in BAM SGL
++ * with generic SGL API.
++ *
++ * returns 0 on error and > 0 on success
++ */
++static inline int qcom_bam_map_sg(struct device *dev,
++ struct qcom_bam_sgl *bam_sgl, int nents, enum dma_data_direction dir)
++{
++ int i, ret = 0;
++
++ for (i = 0; i < nents; i++) {
++ ret = dma_map_sg(dev, &bam_sgl[i].sgl, 1, dir);
++ if (!ret)
++ break;
++ }
++
++ /* unmap the mapped sgl from previous loop in case of error */
++ if (!ret)
++ qcom_bam_unmap_sg(dev, bam_sgl, i, dir);
++
++ return ret;
++}
++
++/*
++ * qcom_prep_bam_ce - Wrapper function to prepare a single BAM command element
++ * with the data that is passed to this function.
++ * @bam_ce: bam command element
++ * @addr: target address
++ * @command: command in bam_command_type
++ * @data: actual data for write and dest addr for read
++ */
++static inline void qcom_prep_bam_ce(struct bam_cmd_element *bam_ce,
++ uint32_t addr, uint32_t command, uint32_t data)
++{
++ bam_ce->addr = cpu_to_le32(addr);
++ bam_ce->command = cpu_to_le32(command);
++ bam_ce->data = cpu_to_le32(data);
++ bam_ce->mask = 0xFFFFFFFF;
++}
++#endif
+--
+2.7.2
--
2.7.2
More information about the Lede-dev
mailing list