[LEDE-DEV] [PATCH v5 1/2] ar71xx: Add support for TP-Link MR6400
John Crispin
john at phrozen.org
Wed May 24 02:57:09 PDT 2017
Hi
On 02/04/17 15:25, Filip Moc wrote:
> You can flash via tftp recovery (serve factory image as /mr6400_tp_recovery.bin
> on 192.168.0.66/24, connect to any ethernet port and power on device while
> holding the reset button). Flashing via OEM web interface does not work.
>
> Hardware Specification (v1.0 EU):
> - SoC: QCA9531
> - Flash: Winbond W25Q64FV (8MiB)
> - RAM: EtronTech EM6AB160TSE-5G (64MiB)
> - Wireless: SoC platform only (2.4GHz b/g/n, 2x internal antenna)
> - Ethernet: 2NIC (3x100M + 1x100M)
> - WWAN: TP-LINK LTE MODULE (2x external detachable antenna)
> - Power: DC 12V 1A
>
> Signed-off-by: Filip Moc <lede at moc6.cz>
> ---
I am afraind this no longer applies, sorry for the delay and while
rebasing could you please also add
<snip>
> diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4
> index 206ace6..6c70091 100644
> --- a/target/linux/ar71xx/config-4.4
> +++ b/target/linux/ar71xx/config-4.4
> @@ -169,6 +169,7 @@ CONFIG_ATH79_MACH_TL_MR11U=y
> CONFIG_ATH79_MACH_TL_MR13U=y
> CONFIG_ATH79_MACH_TL_MR3020=y
> CONFIG_ATH79_MACH_TL_MR3X20=y
> +CONFIG_ATH79_MACH_TL_MR6400=y
> CONFIG_ATH79_MACH_TL_WA701ND_V2=y
> CONFIG_ATH79_MACH_TL_WA7210N_V2=y
> CONFIG_ATH79_MACH_TL_WA801ND_V3=y
the symbol as undefined to the nand and mikrotik config files, otherwise
the builders will spew errors
John
> diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
> index 514d05d..aaec03c 100644
> --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
> +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
> @@ -1358,6 +1358,16 @@ config ATH79_MACH_TL_MR3X20
> select ATH79_DEV_M25P80
> select ATH79_DEV_USB
>
> +config ATH79_MACH_TL_MR6400
> + bool "TP-LINK TL-MR6400 support"
> + select SOC_QCA953X
> + select ATH79_DEV_ETH
> + select ATH79_DEV_GPIO_BUTTONS
> + select ATH79_DEV_LEDS_GPIO
> + select ATH79_DEV_M25P80
> + select ATH79_DEV_USB
> + select ATH79_DEV_WMAC
> +
> config ATH79_MACH_TL_WAX50RE
> bool "TP-LINK TL-WA750/850RE support"
> select SOC_AR934X
> diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
> index 6475259..ef2dc40 100644
> --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
> +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
> @@ -174,6 +174,7 @@ obj-$(CONFIG_ATH79_MACH_TL_MR11U) += mach-tl-mr11u.o
> obj-$(CONFIG_ATH79_MACH_TL_MR13U) += mach-tl-mr13u.o
> obj-$(CONFIG_ATH79_MACH_TL_MR3020) += mach-tl-mr3020.o
> obj-$(CONFIG_ATH79_MACH_TL_MR3X20) += mach-tl-mr3x20.o
> +obj-$(CONFIG_ATH79_MACH_TL_MR6400) += mach-tl-mr6400.o
> obj-$(CONFIG_ATH79_MACH_TL_WA701ND_V2) += mach-tl-wa701nd-v2.o
> obj-$(CONFIG_ATH79_MACH_TL_WA7210N_V2) += mach-tl-wa7210n-v2.o
> obj-$(CONFIG_ATH79_MACH_TL_WA801ND_V3) += mach-tl-wa801nd-v3.o
> diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr6400.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr6400.c
> new file mode 100644
> index 0000000..be49c89
> --- /dev/null
> +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr6400.c
> @@ -0,0 +1,151 @@
> +/*
> + * TP-LINK TL-MR6400 board support
> + *
> + * Copyright (C) 2017 Filip Moc <lede at moc6.cz>
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions are met:
> + * * The name of the author may not be used to endorse or promote products
> + * derived from this software without specific prior written permission.
> + *
> + * THIS SOFTWARE IS PROVIDED BY AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
> + * WARRANTIES, ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
> + * DAMAGES ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE.
> + */
> +
> +#include <linux/gpio.h>
> +#include <linux/platform_device.h>
> +
> +#include <asm/mach-ath79/ar71xx_regs.h>
> +
> +#include "common.h"
> +#include "dev-gpio-buttons.h"
> +#include "dev-eth.h"
> +#include "dev-leds-gpio.h"
> +#include "dev-m25p80.h"
> +#include "dev-usb.h"
> +#include "dev-wmac.h"
> +#include "machtypes.h"
> +
> +#define TL_MR6400_GPIO_LTE_POWER 4
> +#define TL_MR6400_GPIO_BTN_RESET 12 /* SW2 */
> +#define TL_MR6400_GPIO_BTN_RFKILL 14 /* SW3 */
> +#define TL_MR6400_GPIO_LED_WAN 0 /* D12 */
> +#define TL_MR6400_GPIO_LED_4G 1 /* D11 */
> +#define TL_MR6400_GPIO_LED_WPS 3 /* D5 */
> +#define TL_MR6400_GPIO_LED_WLAN 11 /* D3 */
> +#define TL_MR6400_GPIO_LED_POWER 13 /* D2 */
> +#define TL_MR6400_GPIO_LED_LAN 16 /* D4 */
> +
> +#define TL_MR6400_KEYS_POLL_INTERVAL 20 /* msecs */
> +#define TL_MR6400_KEYS_DEBOUNCE_INTERVAL (3 * TL_MR6400_KEYS_POLL_INTERVAL)
> +
> +#define TL_MR6400_WMAC_CALDATA_OFFSET 0x1000
> +
> +static const char *tl_mr6400_part_probes[] = {
> + "tp-link",
> + NULL,
> +};
> +
> +static struct flash_platform_data tl_mr6400_flash_data = {
> + .part_probes = tl_mr6400_part_probes,
> + .type = "w25q64",
> +};
> +
> +static struct gpio_led tl_mr6400_leds_gpio[] __initdata = {
> + {
> + .name = "tp-link:white:wan",
> + .gpio = TL_MR6400_GPIO_LED_WAN,
> + .active_low = 0,
> + },
> + {
> + .name = "tp-link:white:4g",
> + .gpio = TL_MR6400_GPIO_LED_4G,
> + .active_low = 0,
> + },
> + {
> + .name = "tp-link:white:wps",
> + .gpio = TL_MR6400_GPIO_LED_WPS,
> + .active_low = 0,
> + },
> + {
> + .name = "tp-link:white:wlan",
> + .gpio = TL_MR6400_GPIO_LED_WLAN,
> + .active_low = 0,
> + },
> + {
> + .name = "tp-link:white:power",
> + .gpio = TL_MR6400_GPIO_LED_POWER,
> + .active_low = 0,
> + },
> + {
> + .name = "tp-link:white:lan",
> + .gpio = TL_MR6400_GPIO_LED_LAN,
> + .active_low = 0,
> + },
> +};
> +
> +static struct gpio_keys_button tl_mr6400_gpio_keys[] __initdata = {
> + {
> + .desc = "reset",
> + .type = EV_KEY,
> + .code = KEY_RESTART,
> + .debounce_interval = TL_MR6400_KEYS_DEBOUNCE_INTERVAL,
> + .gpio = TL_MR6400_GPIO_BTN_RESET,
> + .active_low = 1,
> + },
> + {
> + .desc = "rfkill",
> + .type = EV_KEY,
> + .code = KEY_RFKILL,
> + .debounce_interval = TL_MR6400_KEYS_DEBOUNCE_INTERVAL,
> + .gpio = TL_MR6400_GPIO_BTN_RFKILL,
> + .active_low = 1,
> + },
> +};
> +
> +static void __init tl_mr6400_setup(void)
> +{
> + u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
> + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
> +
> + ath79_register_m25p80(&tl_mr6400_flash_data);
> +
> + ath79_register_mdio(0, 0x0);
> +
> + /* LAN1, LAN2, LAN3 */
> + ath79_switch_data.phy4_mii_en = 1;
> + ath79_switch_data.phy_poll_mask |= BIT(0);
> + ath79_eth1_data.duplex = DUPLEX_FULL;
> + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
> + ath79_eth1_data.speed = SPEED_1000;
> + ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
> + ath79_register_eth(1);
> +
> + /* LAN4 / WAN */
> + ath79_eth0_data.phy_mask = BIT(0);
> + ath79_eth0_data.duplex = DUPLEX_FULL;
> + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
> + ath79_eth0_data.speed = SPEED_100;
> + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
> + ath79_register_eth(0);
> +
> + ath79_register_wmac(art + TL_MR6400_WMAC_CALDATA_OFFSET, mac);
> +
> + ath79_register_leds_gpio(-1,
> + ARRAY_SIZE(tl_mr6400_leds_gpio),
> + tl_mr6400_leds_gpio);
> +
> + ath79_register_gpio_keys_polled(-1,
> + TL_MR6400_KEYS_POLL_INTERVAL,
> + ARRAY_SIZE(tl_mr6400_gpio_keys),
> + tl_mr6400_gpio_keys);
> +
> + gpio_request_one(TL_MR6400_GPIO_LTE_POWER,
> + GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED | GPIOF_ACTIVE_LOW,
> + "LTE power");
> + ath79_register_usb();
> +}
> +
> +MIPS_MACHINE(ATH79_MACH_TL_MR6400, "TL-MR6400", "TP-LINK TL-MR6400",
> + tl_mr6400_setup);
> diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
> index 4cad628..e89ece1 100644
> --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
> +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
> @@ -206,6 +206,7 @@ enum ath79_mach_type {
> ATH79_MACH_TL_MR3220_V2, /* TP-LINK TL-MR3220 v2 */
> ATH79_MACH_TL_MR3420, /* TP-LINK TL-MR3420 */
> ATH79_MACH_TL_MR3420_V2, /* TP-LINK TL-MR3420 v2 */
> + ATH79_MACH_TL_MR6400, /* TP-LINK TL-MR6400 */
> ATH79_MACH_TL_WA701ND_V2, /* TP-LINK TL-WA701ND v2 */
> ATH79_MACH_TL_WA7210N_V2, /* TP-LINK TL-WA7210N v2 */
> ATH79_MACH_TL_WA750RE, /* TP-LINK TL-WA750RE */
> diff --git a/target/linux/ar71xx/image/tp-link.mk b/target/linux/ar71xx/image/tp-link.mk
> index b251135..2a0b06a 100644
> --- a/target/linux/ar71xx/image/tp-link.mk
> +++ b/target/linux/ar71xx/image/tp-link.mk
> @@ -452,6 +452,17 @@ define Device/tl-mr3420-v2
> endef
> TARGET_DEVICES += tl-mr3020-v1 tl-mr3040-v1 tl-mr3040-v2 tl-mr3220-v1 tl-mr3220-v2 tl-mr3420-v1 tl-mr3420-v2
>
> +define Device/tl-mr6400-v1
> + $(Device/tplink-8mlzma)
> + DEVICE_TITLE := TP-LINK TL-MR6400 v1
> + DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-net kmod-usb-net-rndis kmod-usb-serial kmod-usb-serial-option adb
> + BOARDNAME := TL-MR6400
> + DEVICE_PROFILE := TLMR6400
> + TPLINK_HWID := 0x64000001
> +endef
> +TARGET_DEVICES += tl-mr6400-v1
> +
> +
> define Device/tl-wpa8630
> $(Device/tplink-8mlzma)
> DEVICE_TITLE := TP-LINK TL-WPA8630
More information about the Lede-dev
mailing list