[LEDE-DEV] kernel: update kernel 4.9 to 4.9.28

[Daniel Engberg]

On 2017-05-16 11:06, Koen Vandeputte wrote:
> On 2017-05-16 10:06, Daniel Engberg wrote:
>>> Hi,
>>> 
>>> Thanks for providing a patch, however it fails when applied to master 
>>> (83e4ed3497d40dc7da9d2d2c2febbf6272815c51) or maybe I'm doing 
>>> something wrong (tm). :-/
>>> 
>>> .....
>>> Applying 
>>> /home/diizzy/testme/source/target/linux/generic/patches-4.9/060-0004-mtd-bcm47xxpart-move-TRX-parsing-code-to-separated-f.patch 
>>> using plaintext:
>>> patching file drivers/mtd/bcm47xxpart.c
>>> Hunk #3 FAILED at 241.
>>> Hunk #4 succeeded at 368 (offset 2 lines).
>>> 1 out of 4 hunks FAILED -- saving rejects to file 
>>> drivers/mtd/bcm47xxpart.c.rej
>>> Patch failed!  Please fix 
>>> /home/diizzy/testme/source/target/linux/generic/patches-4.9/060-0004-mtd-bcm47xxpart-move-TRX-parsing-code-to-separated-f.patch!
>>> Makefile:101: recipe for target 
>>> '/home/diizzy/testme/source/build_dir/toolchain-arm_cortex-a9+vfpv3_gcc-5.4.0_musl_eabi/linux-4.9.20/.prepared' 
>>> failed
>>> make[3]: *** 
>>> [/home/diizzy/testme/source/build_dir/toolchain-arm_cortex-a9+vfpv3_gcc-5.4.0_musl_eabi/linux-4.9.20/.prepared] 
>>> Error 1
>>> make[3]: Leaving directory 
>>> '/home/diizzy/testme/source/toolchain/kernel-headers'
>>> .....
>>> 
>>> Marvell Armada (WRT3200ACM)
>>> 
>>> Best regards,
>>> Daniel
>>> 
>>> _______________________________________________
>>> Lede-dev mailing list
>>> Lede-dev at lists.infradead.org
>>> http://lists.infradead.org/mailman/listinfo/lede-dev
>> 
> 
> Hi Daniel,
> 
> Everything seems fine here.
> 
> I tried to recreate your steps:
> 
> - Download master
> - Checkout that specific commit
> - Apply kernel update patch
> - Select target using make menuconfig
> --> Target System:  Marvel Armada 37x/38x/XP
> --> Target Profile: Linksys WRT3200ACM
> - Make
> 
> See this:
> https://pastebin.com/raw/LditxBLp
> 
> 
> Also applied patches separately:
> https://pastebin.com/raw/GnyrRh8M
> 
> 
> in short:
> 
> Applying
> /mnt/ramdisk/test/firmware/builds/source/target/linux/generic/patches-4.9/060-0003-mtd-bcm47xxsflash-support-reading-flash-out-of-mappi.patch
> using plaintext:
> patching file drivers/mtd/devices/bcm47xxsflash.c
> patching file drivers/mtd/devices/bcm47xxsflash.h
> 
> Applying
> /mnt/ramdisk/test/firmware/builds/source/target/linux/generic/patches-4.9/060-0004-mtd-bcm47xxpart-move-TRX-parsing-code-to-separated-f.patch
> using plaintext:
> patching file drivers/mtd/bcm47xxpart.c
> 
> Applying
> /mnt/ramdisk/test/firmware/builds/source/target/linux/generic/patches-4.9/060-0005-mtd-bcm47xxpart-support-layouts-with-multiple-TRX-pa.patch
> using plaintext:
> patching file drivers/mtd/bcm47xxpart.c
> 
> 
> 
> Please let me know if I missed something above in simulating it.
> 
> Kind Regards,
> 
> Koen

Hi, using the correct email helps... ;-)

Using that checkout works, also... it might have been caused by using 
patch instead of git.

Anyhow, thanks!

Daniel