[LEDE-DEV] [PATCH] ramips: add support for GL-inet GL-MT300N-V2

[Mathias Kresin]

2017-05-05 11:28 GMT+02:00 kysonlok <kysonlok at gmail.com>:
> This patch adds supports for the GL-inet GL-MT300N-V2.
>
> Specification:
> - SoC: MediaTek MT7628AN
> - Flash: 16 MiB (W25Q128FVSG)
> - RAM: 128 MiB DDR
> - Ethernet: 1 x WAN (100 Mbps) and 1 x LAN (100 Mbps)
> - USB: 1 x USB 2.0 port
> - Button: 1 x switch button, 1 x reset button
> - LED: 3 x LEDS
> - UART: 1 x UART on PCB (JP1: 3.3V, RX, TX, GND)
>
> Installation through Luci:
> - The original firmware is LEDE, so both LuCI or sysupgrade can be used.
> - Do not keep settings, for sysupgrade please use the -n option.
>
> Installation through bootloader webserver:
> - Plug power and hold reset button until red LED blink to bright.
> - Install sysupgrade image using web interface on 192.168.1.1.
>
> Signed-off-by: kysonlok <kysonlok at gmail.com>

It seams to me you have missed my review of your patch. Would you
please fix the issues I've outlined in
http://lists.infradead.org/pipermail/lede-dev/2017-May/007293.html.

Mathias