[LEDE-DEV] [PATCH] ramips: Add support for GL-MT300N-V2
Piotr Dymacz
pepe2k at gmail.com
Thu May 4 01:29:37 PDT 2017
Hello,
Please, make sure to add a proper SoB line as described in "Submitting
patches": [1].
Also, could you please include in your commit message short description
about the hardware and how to install LEDE on it? Have a look at the
recent ramips board additions for some examples: [2].
[1] https://lede-project.org/submitting-patches
[2]
https://github.com/lede-project/source/search?&q=ramips+add+support+for&type=Commits
--
Cheers,
Piotr
On 04.05.2017 08:41, kysonlok wrote:
> This patches adds support for GL-MT300N-V2 router.
>
> Signed-off-by: kysonlok <kysonlok at gmail.com>
> ---
> target/linux/ramips/base-files/etc/board.d/01_leds | 1 +
> .../linux/ramips/base-files/etc/board.d/02_network | 1 +
> target/linux/ramips/base-files/lib/ramips.sh | 3 +
> .../ramips/base-files/lib/upgrade/platform.sh | 1 +
> target/linux/ramips/dts/GL-MT300N-V2.dts | 135 +++++++++++++++++++++
> target/linux/ramips/image/mt7628.mk | 8 ++
> 6 files changed, 149 insertions(+)
> create mode 100644 target/linux/ramips/dts/GL-MT300N-V2.dts
>
> diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
> index 52542ec..101c1c2 100755
> --- a/target/linux/ramips/base-files/etc/board.d/01_leds
> +++ b/target/linux/ramips/base-files/etc/board.d/01_leds
> @@ -186,6 +186,7 @@ fonera20n)
> ;;
> gl-mt300a|\
> gl-mt300n|\
> +gl-mt300n-v2|\
> gl-mt750)
> set_wifi_led "$board:wlan"
> ;;
> diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
> index 80a3bc2..6af0065 100755
> --- a/target/linux/ramips/base-files/etc/board.d/02_network
> +++ b/target/linux/ramips/base-files/etc/board.d/02_network
> @@ -156,6 +156,7 @@ ramips_setup_interfaces()
> f5d8235-v2|\
> gl-mt300a|\
> gl-mt300n|\
> + gl-mt300n-v2|\
> gl-mt750|\
> hg255d|\
> jhr-n805r|\
> diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
> index 87cb7ff..1e031cd 100755
> --- a/target/linux/ramips/base-files/lib/ramips.sh
> +++ b/target/linux/ramips/base-files/lib/ramips.sh
> @@ -214,6 +214,9 @@ ramips_board_detect() {
> *"GL-MT300N")
> name="gl-mt300n"
> ;;
> + *"GL-MT300N-V2")
> + name="gl-mt300n-v2"
> + ;;
> *"GL-MT750")
> name="gl-mt750"
> ;;
> diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
> index adad8da..2c50c3c 100755
> --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
> +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
> @@ -64,6 +64,7 @@ platform_check_image() {
> freestation5|\
> gl-mt300a|\
> gl-mt300n|\
> + gl-mt300n-v2|\
> gl-mt750|\
> hc5*61|\
> hc5661a|\
> diff --git a/target/linux/ramips/dts/GL-MT300N-V2.dts b/target/linux/ramips/dts/GL-MT300N-V2.dts
> new file mode 100644
> index 0000000..bf64c99
> --- /dev/null
> +++ b/target/linux/ramips/dts/GL-MT300N-V2.dts
> @@ -0,0 +1,135 @@
> +/dts-v1/;
> +
> +#include "mt7628an.dtsi"
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +
> +/{
> + compatible = "GL-MT300N-V2", "ralink,mt7620an-soc";
> + model = "GL-MT300N-V2";
> +
> + chosen {
> + bootargs = "console=ttyS0,115200";
> + };
> +
> + memory at 0 {
> + device_type = "memory";
> + reg = <0x0 0x4000000>;
> + };
> +
> + gpio-leds {
> + compatible = "gpio-leds";
> +
> + usbpow {
> + label = "gl-mt300n-v2:usbpow";
> + gpios = <&gpio0 11 1>;
> + };
> +
> + wan {
> + label = "gl-mt300n-v2:wan";
> + gpios = <&gpio1 11 1>;
> + };
> +
> + wlan {
> + label = "gl-mt300n-v2:wlan";
> + gpios = <&gpio1 12 1>;
> + };
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys-polled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + poll-interval = <20>;
> +
> + reset {
> + label = "reset";
> + gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_RESTART>;
> + };
> +
> + BIT_0 {
> + label = "BIT_0";
> + gpios = <&gpio0 0 1>;
> + linux,code = <0x100>;
> + };
> +
> + BIT_1 {
> + label = "BIT_1";
> + gpios = <&gpio0 3 1>;
> + linux,code = <0x101>;
> + };
> + };
> +
> +};
> +
> +&pinctrl {
> + state_default: pinctrl0 {
> + gpio {
> + ralink,group = "refclk", "gpio", "wled_an", "p0led_an", "p1led_an", "i2c", "i2s";
> + ralink,function = "gpio";
> + };
> + };
> +};
> +
> +ðernet {
> + mtd-mac-address = <&factory 0x04000>;
> +};
> +
> +&wmac {
> + status = "okay";
> + ralink,mtd-eeprom = <&factory 0x04000>;
> +};
> +
> +&i2c {
> + status = "okay";
> +};
> +
> +&spi0 {
> + status = "okay";
> +
> + m25p80 at 0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "jedec,spi-nor";
> + reg = <0>;
> + spi-max-frequency = <10000000>;
> + m25p,chunked-io = <32>;
> +
> + partition at 0 {
> + label = "u-boot";
> + reg = <0x0 0x30000>;
> + read-only;
> + };
> +
> + partition at 30000 {
> + label = "u-boot-env";
> + reg = <0x30000 0x10000>;
> + read-only;
> + };
> +
> + factory: partition at 40000 {
> + label = "factory";
> + reg = <0x40000 0x10000>;
> + read-only;
> + };
> +
> + partition at 50000 {
> + label = "firmware";
> + reg = <0x50000 0xf00000>;
> + };
> + };
> +};
> +
> +&sdhci {
> + status = "okay";
> +};
> +
> +&ehci {
> + status = "okay";
> +};
> +
> +&ohci {
> + status = "okay";
> +};
> diff --git a/target/linux/ramips/image/mt7628.mk b/target/linux/ramips/image/mt7628.mk
> index 6bb04ea..90c7969 100644
> --- a/target/linux/ramips/image/mt7628.mk
> +++ b/target/linux/ramips/image/mt7628.mk
> @@ -26,6 +26,14 @@ define Device/miwifi-nano
> endef
> TARGET_DEVICES += miwifi-nano
>
> +define Device/gl-mt300n-v2
> + DTS := GL-MT300N-V2
> + IMAGE_SIZE := $(ralink_default_fw_size_16M)
> + DEVICE_TITLE := GL-iNet GL-MT300N-V2
> + DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
> +endef
> +TARGET_DEVICES += gl-mt300n-v2
> +
> define Device/vocore2
> DTS := VOCORE2
> IMAGE_SIZE := $(ralink_default_fw_size_16M)
>
More information about the Lede-dev
mailing list