[LEDE-DEV] [PATCH v2] ar71xx: Add TP-LINK TL-WR841N v12 support.

Vittorio G (VittGam) openwrt at vittgam.net
Wed Mar 29 21:21:26 PDT 2017


Hello Piotr,

On 27/03/2017 11:22:05 CEST, Piotr Dymacz wrote:
> Hello Vittorio,
> 
> On 26.03.2017 09:55, Vittorio Gambaletta (VittGam) wrote:
>> This router has the same hardware of TP-LINK TL-WR841N v11 (same
>> FCC ID, same TFTP image name...).
>>
>> The stock firmware web interface does not seem to accept the LEDE
>> factory image, but it can be flashed via the u-boot TFTP recovery
>> by long-pressing the reset button after power on.
> 
> So, I have just made a test (using TL-WR841N v9 "converted" to v12 EU) 
> and factory-eu image works without any problems (Firefox 52).

Ok, perfect, then!

> I'm going to pick up your patch with small change in commit message and 
> subject (please, don't add dot at the end of the subject next time).

Thanks for your suggestion. I knew the exact contrary and in fact I'm
adding dot at end of subject every time... Do you know if there is some
place (that I might have very well missed if it exists...) where this
kind of style rules are written?

Cheers,
Vittorio



More information about the Lede-dev mailing list