[LEDE-DEV] [PATCH] Lantiq Amazon-SE SoC / ADSL Modem Allnet All0333CJ Rev.C

Tino Reichardt list-lede at mcmilk.de
Tue Mar 7 12:07:41 PST 2017


* Bastian Bittorf <bb at npl.de> wrote:
> * Bastian Bittorf <bb at npl.de> [07.03.2017 11:07]:
> > * Tino Reichardt <list-lede at mcmilk.de> [06.03.2017 08:24]:
> > > BE AWARE:
> > > My patch seems to work fine, even the dsl modem seems to be correctly
> > > loaded. But it's not tested currently... so please do not flash your
> > > modems, when they are needed currently ;)
> > 
> > Impressive! i will check if pppoe works later and report.
> 
> it seems, that the modem is not initialised correctly,
> there is e.g. no blinking of the led and 'nas0' will not
> come up and so no pppoe...if somebody has an idea, i can test.

This is my current bootlog:

[...]
[    0.531727] 0x000000010000-0x0000003ff200 : "firmware"
[    0.555144] 2 uimage-fw partitions found on MTD device firmware
[    0.559815] 0x000000010000-0x000000110874 : "kernel"
[    0.571102] 0x000000110874-0x0000003ff200 : "rootfs"
[    0.582522] mtd: device 3 (rootfs) set to be root filesystem
[    0.586987] 1 squashfs-split partitions found on MTD device rootfs
[    0.593060] 0x0000002d0000-0x0000003f0000 : "rootfs_data"
[    0.606262] 0x0000003ff200-0x0000003ffe00 : "uboot_env"
[    0.618026] 0x0000003ffe00-0x000000400000 : "dummy_rootfs"
[    0.631843] Selected EPHY mode
[    0.634260] etop: invalid MAC, using random
[    0.648022] libphy: ltq_mii: probed
[    0.650592] eth0: attached PHY [Generic PHY] (phy_addr=1e180000.etop-ff:08, irq=-1)
[    0.662138] wdt 1f8803f0.watchdog: Init done
[    0.670421] NET: Registered protocol family 17
[    0.673865] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    0.686115] 8021q: 802.1Q VLAN Support v1.8
[    0.723045] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
[    0.735002] Freeing unused kernel memory: 1200K (80314000 - 80440000)
[    3.127473] init: Console is alive
[    3.130483] init: - watchdog -
[    3.859264] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    4.063814] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    4.080946] init: - preinit -
[    8.068482] jffs2: notice: (277) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[    8.087572] mount_root: switching to jffs2 overlay
[    8.152790] urandom-seed: Seeding with /etc/urandom.seed
[    8.716110] procd: - early -
[    8.718146] procd: - watchdog -
[    9.593213] procd: - ubus -
[    9.961355] random: ubusd: uninitialized urandom read (4 bytes read, 39 bits of entropy available)
[    9.972503] random: ubusd: uninitialized urandom read (4 bytes read, 39 bits of entropy available)
[    9.981601] random: ubusd: uninitialized urandom read (4 bytes read, 39 bits of entropy available)
[    9.989488] random: ubusd: uninitialized urandom read (4 bytes read, 39 bits of entropy available)
[    9.999919] random: ubusd: uninitialized urandom read (4 bytes read, 39 bits of entropy available)
[   10.007788] random: ubusd: uninitialized urandom read (4 bytes read, 39 bits of entropy available)
[   10.019285] random: ubusd: uninitialized urandom read (4 bytes read, 39 bits of entropy available)
[   10.028188] random: ubusd: uninitialized urandom read (4 bytes read, 39 bits of entropy available)
[   10.038213] procd: - init -
[   11.040310] kmodloader: loading kernel modules from /etc/modules.d/*
[   11.055903] NET: Registered protocol family 8
[   11.058993] NET: Registered protocol family 20
[   11.075693] IFX MEI Version 5.00.00
[   11.099774] Infineon CPE API Driver version: DSL CPE API V3.24.4.4
[   11.128356] ATM1.0.26    ATM (A1) firmware version 0.16
[   11.132296] ifxmips_atm: ATM init succeed
[   11.330351] nf_conntrack version 0.5.0 (200 buckets, 800 max)
[   11.466418] xt_time: kernel timezone is -0000
[   11.475272] ip_tables: (C) 2000-2006 Netfilter Core Team
[   11.506448] PPP generic driver version 2.4.2
[   11.517892] NET: Registered protocol family 24
[   11.531936] kmodloader: done loading kernel modules from /etc/modules.d/*
[   11.628832] random: ubusd: uninitialized urandom read (4 bytes read, 46 bits of entropy available)
[   11.637421] random: ubus: uninitialized urandom read (4 bytes read, 46 bits of entropy available)
[   24.951827] [DSL_BSP_FWDownload 1615]: 
[   25.125895] [IFX_MEI_DFEMemoryAlloc 1498]: image_size = 322840
[   25.183263] [DSL_BSP_FWDownload 1683]: -> IFX_MEI_BarUpdate()
[   25.404145] [DSL_BSP_FWDownload 1615]: 
[   25.428137] [DSL_BSP_FWDownload 1615]: 
[   25.647045] [DSL_BSP_FWDownload 1615]: 
[   25.659983] [DSL_BSP_FWDownload 1615]: 
[   25.666015] [IFX_MEI_Ioctls 2560]: DSL_FIO_BSP_DSL_START
[   25.670095] [IFX_MEI_RunAdslModem 1318]: allocate 32KB swap buff memory at: 0x807c0000
[   25.927207] [IFX_MEI_IrqHandle 1856]: Got MODEM_READY_MSG
[   25.931446] [IFX_MEI_IrqHandle 1856]: Got MODEM_READY_MSG
[   26.145547] [IFX_MEI_RunAdslModem 1371]: Modem is ready.
[   28.187540] device eth0 entered promiscuous mode
[   32.102065] random: nonblocking pool is initialized


I can test it more on friday... I will also upload an image of it.



-- 
Best regards, TR



More information about the Lede-dev mailing list