[LEDE-DEV] [PATCH] ar71xx: change image version for ubiquiti devices
Bill Moffitt
bmoffitt at ayrstone.com
Fri Mar 3 09:01:57 PST 2017
I don't know if it makes any difference, but insofar as there is an
AirOS 6.0 now
(https://community.ubnt.com/t5/airMAX-Updates-Blog/airOS-6-0-Has-Been-Released/ba-p/1769476)
should we change the strong to something like "v7.0.0-" etc.?
On 3/3/2017 7:51 AM, txt.file wrote:
> changes the image version from hardcoded OpenWrt to
> $VERSION_DIST. AirOS shows a notification with the image version
> during a firmware upgrade.
>
> fixes #582
>
> Signed-off-by: Matthias Fritzsche <txt.file at txtfile.eu>
> ---
> target/linux/ar71xx/image/ubnt.mk | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/target/linux/ar71xx/image/ubnt.mk b/target/linux/ar71xx/image/ubnt.mk
> index 7a1fc80..c633ca1 100644
> --- a/target/linux/ar71xx/image/ubnt.mk
> +++ b/target/linux/ar71xx/image/ubnt.mk
> @@ -6,7 +6,7 @@
> # routerboard creates partitions out of the ubnt header
> define Build/mkubntimage
> -$(STAGING_DIR_HOST)/bin/mkfwimage \
> - -B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-OpenWrt-$(REVISION) \
> + -B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \
> -k $(IMAGE_KERNEL) \
> -r $@ \
> -o $@
> @@ -19,7 +19,7 @@ define Build/mkubntimage-split
> dd if=$@ of=$@.old1 bs=1024k count=1; \
> dd if=$@ of=$@.old2 bs=1024k skip=1; \
> $(STAGING_DIR_HOST)/bin/mkfwimage \
> - -B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-OpenWrt-$(REVISION) \
> + -B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \
> -k $@.old1 \
> -r $@.old2 \
> -o $@; \
> @@ -28,7 +28,7 @@ endef
>
> define Build/mkubntimage2
> -$(STAGING_DIR_HOST)/bin/mkfwimage2 -f 0x9f000000 \
> - -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-OpenWrt-$(REVISION) \
> + -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \
> -p jffs2:0x50000:0xf60000:0:0:$@ \
> -o $@.new
> @mv $@.new $@
More information about the Lede-dev
mailing list