[LEDE-DEV] [PATCH v2] ramips: Improve Sanlinking D240 config

[Kristian Evensen]

* The left most mini-PCIe slot (the one attached to SIM2) can be
power-cycled by setting GPIO 0 to high/low.

* The D240 only needs the MT76x2 module, so update makefile to reflect this.
Note that until the default mt7620 target is updated, then kmod-mt76 (and thus
kmod-mt7603) will be selected by default.

v1->v2:
* Rename gpio and remove redundant comment (thanks Piotr Dymacz)

Signed-off-by: Kristian Evensen <kristian.evensen at gmail.com>
---
 target/linux/ramips/dts/D240.dts    | 11 +++++++++++
 target/linux/ramips/image/mt7620.mk |  2 +-
 2 files changed, 12 insertions(+), 1 deletion(-)

diff --git a/target/linux/ramips/dts/D240.dts b/target/linux/ramips/dts/D240.dts
index ef45d38..dbf061c 100644
--- a/target/linux/ramips/dts/D240.dts
+++ b/target/linux/ramips/dts/D240.dts
@@ -46,6 +46,17 @@
 		bootargs = "console=ttyS0,115200";
 	};
 
+	gpio-export {
+		compatible = "gpio-export";
+		#size-cells = <0>;
+
+        power_mpcie2 {
+			gpio-export,name = "power_mpcie2";
+			gpio-export,output = <GPIO_ACTIVE_LOW>;
+			gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
 	gpio-leds {
 		compatible = "gpio-leds";
 
diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk
index 4a76ab3..0410a9a 100644
--- a/target/linux/ramips/image/mt7620.mk
+++ b/target/linux/ramips/image/mt7620.mk
@@ -471,6 +471,6 @@ define Device/d240
   DTS := D240
   IMAGE_SIZE := $(ralink_default_fw_size_16M)
   DEVICE_TITLE := Sanlinking Technologies D240
-  DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-mt76 kmod-sdhci-mt7620
+  DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-mt76-core kmod-mt76x2 kmod-sdhci-mt7620
 endef
 TARGET_DEVICES += d240
-- 
2.9.3