[LEDE-DEV] USB3.0 regression / trying to isolate / testers needed

[Rafał Miłecki]

On 03/01/2017 08:18 AM, Thomas Reifferscheid wrote:
> When you have a device running Lede that comes with at least one USB3.0
> port then please insert a USB 3.0 drive/thumb drive and power it on. If
> you happen to get similar dmesg messages from your cmdline within the
> first 30 seconds after poweron then please report to FS#177 with a full
> dmesg.

No problem here

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.9.13 (zajec at linux-samsung.lan) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3346+1-9eacb9d7fc) ) #0 SMP Wed Mar 1 06:10:48 2017
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt:Machine model: SmartRG SR400ac
(...)
[    5.799735] usbcore: registered new interface driver usbfs
[    5.805365] usbcore: registered new interface driver hub
[    5.810765] usbcore: registered new device driver usb
[    5.819220] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.826554] ehci-platform: EHCI generic platform driver
[    5.833589] ehci-platform 18021000.ehci: EHCI Host Controller
[    5.839348] ehci-platform 18021000.ehci: new USB bus registered, assigned bus number 1
[    5.847569] ehci-platform 18021000.ehci: irq 36, io mem 0x18021000
[    5.848316] bcm_ns_usb3 18105000.usb3-phy: Registered Broadcom Northstar USB 3.0 PHY driver
[    5.849959] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    5.851094] ohci-platform: OHCI generic platform driver
[    5.851318] ohci-platform 18022000.ohci: Generic Platform OHCI controller
[    5.851353] ohci-platform 18022000.ohci: new USB bus registered, assigned bus number 2
[    5.851504] ohci-platform 18022000.ohci: irq 36, io mem 0x18022000
[    5.923213] ehci-platform 18021000.ehci: USB 2.0 started, EHCI 1.00
[    5.925076] hub 2-0:1.0: USB hub found
[    5.925176] hub 2-0:1.0: 2 ports detected
[    5.930636] xhci-hcd 18023000.xhci: xHCI Host Controller
[    5.930676] xhci-hcd 18023000.xhci: new USB bus registered, assigned bus number 3
[    5.931039] xhci-hcd 18023000.xhci: hcc params 0x02501164 hci version 0x100 quirks 0x02010010
[    5.931096] xhci-hcd 18023000.xhci: irq 37, io mem 0x18023000
[    5.932301] hub 3-0:1.0: USB hub found
[    5.932409] hub 3-0:1.0: config failed, hub doesn't have any ports! (err -19)
[    5.932612] xhci-hcd 18023000.xhci: xHCI Host Controller
[    5.932633] xhci-hcd 18023000.xhci: new USB bus registered, assigned bus number 4
[    5.950320] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    5.951037] hub 4-0:1.0: USB hub found
[    5.951134] hub 4-0:1.0: 1 port detected
[    5.953543] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    5.970438] init: - preinit -
[    6.014412] hub 1-0:1.0: USB hub found
[    6.018233] hub 1-0:1.0: 2 ports detected
[    6.740299] usb 4-1: new SuperSpeed USB device number 2 using xhci-hcd
(...)
root at LEDE:/# uptime
  06:14:24 up 3 min,  load average: 0.08, 0.06, 0.02