[LEDE-DEV] [PATCH] ar71xx: set status led for the gl-* boards
Wojciech Jowsa
w.jowsa at radytek.com
Tue Feb 28 05:18:19 PST 2017
This sets status_led for the gl-ar300m and gl-mifi boards, and fixes led names
so that they follow correct naming scheme.
It also fixes mangled whitespace in the mach-gl-ar300m.c.
Signed-off-by: Wojciech Jowsa <w.jowsa at radytek.com>
---
target/linux/ar71xx/base-files/etc/board.d/01_leds | 21 +-
target/linux/ar71xx/base-files/etc/diag.sh | 4 +-
.../ar71xx/files/arch/mips/ath79/mach-gl-ar300m.c | 222 ++++++++++-----------
.../ar71xx/files/arch/mips/ath79/mach-gl-mifi.c | 10 +-
4 files changed, 129 insertions(+), 128 deletions(-)
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds
b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index 4dc4bfd..0ed533d 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -312,19 +312,18 @@ dlan-pro-1200-ac)
ucidef_set_led_gpio "plcw" "dLAN" "devolo:status:dlan" "17" "0"
ucidef_set_led_gpio "plcr" "dLAN" "devolo:error:dlan" "16" "0"
;;
-gl-ar150|\
-gl-ar300|\
-gl-ar300m|\
+gl-ar300m)
+ ucidef_set_led_wlan "wlan" "WLAN" "$board:red:wlan" "phy0tpt"
+ ;;
gl-mifi)
+ ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
+ ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0"
+ ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth1"
+ ucidef_set_led_netdev "3gnet" "3GNET" "$board:green:net" "3g-wan"
+ ;;
+gl-ar150|\
+gl-ar300)
ucidef_set_led_wlan "wlan" "WLAN" "$board:wlan" "phy0tpt"
-
- case "$board" in
- gl-mifi)
- ucidef_set_led_netdev "wan" "WAN" "$board:wan" "eth0"
- ucidef_set_led_netdev "lan" "LAN" "$board:lan" "eth1"
- ucidef_set_led_netdev "3gnet" "3GNET" "$board:net" "3g-wan"
- ;;
- esac
;;
gl-domino|\
sc300m|\
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh
b/target/linux/ar71xx/base-files/etc/diag.sh
index 1064641..7987e51 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -61,7 +61,9 @@ get_status_led() {
ap90q|\
cpe830|\
cpe870|\
- gl-inet)
+ gl-inet|\
+ gl-mifi|\
+ gl-ar300m)
status_led="$board:green:lan"
;;
ap96)
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar300m.c
b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar300m.c
index 62906a1..8f4a0c5 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar300m.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar300m.c
@@ -6,9 +6,9 @@
* Copyright (C) 2013 alzhao <alzhao at gmail.com>
* Copyright (C) 2014 Michel Stempin <michel.stempin at wanadoo.fr>
*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
*/
#include <linux/gpio.h>
@@ -37,130 +37,130 @@
#define GL_AR300M_GPIO_BTN_LEFT 0
#define GL_AR300M_GPIO_BTN_RIGHT 1
-#define GL_AR300M_KEYS_POLL_INTERVAL 20 /* msecs */
-#define GL_AR300M_KEYS_DEBOUNCE_INTERVAL (3 * GL_AR300M_KEYS_POLL_INTERVAL)
+#define GL_AR300M_KEYS_POLL_INTERVAL 20 /* msecs */
+#define GL_AR300M_KEYS_DEBOUNCE_INTERVAL (3 *
GL_AR300M_KEYS_POLL_INTERVAL)
-#define GL_AR300M_MAC0_OFFSET 0
-#define GL_AR300M_MAC1_OFFSET 6
-#define GL_AR300M_WMAC_CALDATA_OFFSET 0x1000
-#define GL_AR300M_PCIE_CALDATA_OFFSET 0x5000
+#define GL_AR300M_MAC0_OFFSET 0
+#define GL_AR300M_MAC1_OFFSET 6
+#define GL_AR300M_WMAC_CALDATA_OFFSET 0x1000
+#define GL_AR300M_PCIE_CALDATA_OFFSET 0x5000
static struct gpio_led gl_ar300m_leds_gpio[] __initdata = {
- {
- .name = "gl-ar300m:usb",
- .gpio = GL_AR300M_GPIO_LED_USB,
- .active_low = 0,
- .default_state = 1,
- },
- {
- .name = "gl-ar300m:wlan",
- .gpio = GL_AR300M_GPIO_LED_WLAN,
- .active_low = 1,
- },
- {
- .name = "gl-ar300m:lan",
- .gpio = GL_AR300M_GPIO_LED_LAN,
- .active_low = 1,
- },
- {
- .name = "gl-ar300m:system",
- .gpio = GL_AR300M_GPIO_LED_SYSTEM,
- .active_low = 1,
- .default_state = 1,
- },
+ {
+ .name = "gl-ar300m:green:usb",
+ .gpio = GL_AR300M_GPIO_LED_USB,
+ .active_low = 0,
+ .default_state = 1,
+ },
+ {
+ .name = "gl-ar300m:green:wlan",
+ .gpio = GL_AR300M_GPIO_LED_WLAN,
+ .active_low = 1,
+ },
+ {
+ .name = "gl-ar300m::green:lan",
+ .gpio = GL_AR300M_GPIO_LED_LAN,
+ .active_low = 1,
+ },
+ {
+ .name = "gl-ar300m:green:system",
+ .gpio = GL_AR300M_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ .default_state = 1,
+ },
};
static struct gpio_keys_button gl_ar300m_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = GL_AR300M_KEYS_DEBOUNCE_INTERVAL,
- .gpio = GL_AR300M_GPIO_BTN_RESET,
- .active_low = 1,
- },
- {
- .desc = "button right",
- .type = EV_KEY,
- .code = BTN_0,
- .debounce_interval = GL_AR300M_KEYS_DEBOUNCE_INTERVAL,
- .gpio = GL_AR300M_GPIO_BTN_LEFT,
- .active_low = 0,
- },
- {
- .desc = "button left",
- .type = EV_KEY,
- .code = BTN_1,
- .debounce_interval = GL_AR300M_KEYS_DEBOUNCE_INTERVAL,
- .gpio = GL_AR300M_GPIO_BTN_RIGHT,
- .active_low = 0,
- },
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = GL_AR300M_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = GL_AR300M_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+ {
+ .desc = "button right",
+ .type = EV_KEY,
+ .code = BTN_0,
+ .debounce_interval = GL_AR300M_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = GL_AR300M_GPIO_BTN_LEFT,
+ .active_low = 0,
+ },
+ {
+ .desc = "button left",
+ .type = EV_KEY,
+ .code = BTN_1,
+ .debounce_interval = GL_AR300M_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = GL_AR300M_GPIO_BTN_RIGHT,
+ .active_low = 0,
+ },
};
static struct spi_board_info gl_ar300m_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "m25p80",
- .platform_data = NULL,
- },
- {
- .bus_num = 0,
- .chip_select = 1,
- .max_speed_hz = 25000000,
- .modalias = "ath79-spinand",
- .platform_data = NULL,
- }
+ {
+ .bus_num = 0,
+ .chip_select = 0,
+ .max_speed_hz = 25000000,
+ .modalias = "m25p80",
+ .platform_data = NULL,
+ },
+ {
+ .bus_num = 0,
+ .chip_select = 1,
+ .max_speed_hz = 25000000,
+ .modalias = "ath79-spinand",
+ .platform_data = NULL,
+ }
};
static struct ath79_spi_platform_data gl_ar300m_spi_data = {
- .bus_num = 0,
- .num_chipselect = 2,
+ .bus_num = 0,
+ .num_chipselect = 2,
};
static void __init gl_ar300m_setup(void)
{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
- u8 tmpmac[ETH_ALEN];
-
- ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE);
- ath79_register_spi(&gl_ar300m_spi_data, gl_ar300m_spi_info, 2);
-
- /* register gpio LEDs and keys */
- ath79_register_leds_gpio(-1, ARRAY_SIZE(gl_ar300m_leds_gpio),
- gl_ar300m_leds_gpio);
- ath79_register_gpio_keys_polled(-1, GL_AR300M_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(gl_ar300m_gpio_keys),
- gl_ar300m_gpio_keys);
-
- ath79_register_mdio(0, 0x0);
-
- /* WAN */
- ath79_init_mac(ath79_eth0_data.mac_addr, art + GL_AR300M_MAC0_OFFSET, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.speed = SPEED_100;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_register_eth(0);
-
- /* LAN */
- ath79_init_mac(ath79_eth1_data.mac_addr, art + GL_AR300M_MAC1_OFFSET, 0);
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_switch_data.phy_poll_mask |= BIT(4);
- ath79_switch_data.phy4_mii_en = 1;
- ath79_register_eth(1);
-
- ath79_init_mac(tmpmac, art + GL_AR300M_WMAC_CALDATA_OFFSET + 2, 0);
- ath79_register_wmac(art + GL_AR300M_WMAC_CALDATA_OFFSET, tmpmac);
-
- /* enable usb */
- ath79_register_usb();
- /* enable pci */
- ath79_register_pci();
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+ u8 tmpmac[ETH_ALEN];
+
+ ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE);
+ ath79_register_spi(&gl_ar300m_spi_data, gl_ar300m_spi_info, 2);
+
+ /* register gpio LEDs and keys */
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(gl_ar300m_leds_gpio),
+ gl_ar300m_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, GL_AR300M_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(gl_ar300m_gpio_keys),
+ gl_ar300m_gpio_keys);
+
+ ath79_register_mdio(0, 0x0);
+
+ /* WAN */
+ ath79_init_mac(ath79_eth0_data.mac_addr, art +
GL_AR300M_MAC0_OFFSET, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.phy_mask = BIT(4);
+ ath79_register_eth(0);
+
+ /* LAN */
+ ath79_init_mac(ath79_eth1_data.mac_addr, art +
GL_AR300M_MAC1_OFFSET, 0);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+ ath79_switch_data.phy_poll_mask |= BIT(4);
+ ath79_switch_data.phy4_mii_en = 1;
+ ath79_register_eth(1);
+
+ ath79_init_mac(tmpmac, art + GL_AR300M_WMAC_CALDATA_OFFSET + 2, 0);
+ ath79_register_wmac(art + GL_AR300M_WMAC_CALDATA_OFFSET, tmpmac);
+
+ /* enable usb */
+ ath79_register_usb();
+ /* enable pci */
+ ath79_register_pci();
}
MIPS_MACHINE(ATH79_MACH_GL_AR300M, "GL-AR300M", "GL-AR300M",
- gl_ar300m_setup);
+ gl_ar300m_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-mifi.c
b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-mifi.c
index 42f4415..412c562 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-mifi.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-mifi.c
@@ -41,27 +41,27 @@
static struct gpio_led gl_mifi_leds_gpio[] __initdata = {
{
- .name = "gl-mifi:wan",
+ .name = "gl-mifi:greeen:wan",
.gpio = GL_MIFI_GPIO_LED_WAN,
.active_low = 0,
},
{
- .name = "gl-mifi:lan",
+ .name = "gl-mifi:green:lan",
.gpio = GL_MIFI_GPIO_LED_LAN,
.active_low = 0,
},
{
- .name = "gl-mifi:wlan",
+ .name = "gl-mifi:green:wlan",
.gpio = GL_MIFI_GPIO_LED_WLAN,
.active_low = 0,
},
{
- .name = "gl-mifi:net",
+ .name = "gl-mifi:green:net",
.gpio = GL_MIFI_GPIO_LED_NET,
.active_low = 0,
},
{
- .name = "gl-mifi:3gcontrol",
+ .name = "gl-mifi:green:3gcontrol",
.gpio = GL_MIFI_GPIO_LED_3GCONTROL,
.active_low = 0,
}
More information about the Lede-dev
mailing list