[LEDE-DEV] rb112/rb133 (adm5120) compile fail

[Denis Periša]

Ah, now I saw if I enable "BROKEN" that it will show as rb1xx, not
generic.. And does compile altho I cannot get ath5k running for some
crypto reason..

Sorry for this, but problem above is maybe someones else.

On Mon, Feb 27, 2017 at 3:42 AM, Denis Periša <darkman.hr at gmail.com> wrote:
> Does anyone use these devices, I cannot compile minimal firmware for them.
>
> Here is build log. (last part)
>
> # Cellvision
> # Compex
> export MAKEFLAGS= ;make V=ss -C lzma-loader
> KDIR=/DISK2/OPENWRT/2017/LEDE/rb133c/build_dir/target-mipsel_mips32_musl/linux-adm5120_router_le
> TARGET_DIR=/DISK2/OPENWRT/2017/LEDE/rb133c/bin/targets/adm5120/router_le
> LOADER=/DISK2/OPENWRT/2017/LEDE/rb133c/bin/targets/adm5120/router_le/lede-adm5120-router_le-wp54g-ramfs.bin
> LOADER_DATA=/DISK2/OPENWRT/2017/LEDE/rb133c/build_dir/target-mipsel_mips32_musl/linux-adm5120_router_le/vmlinux.lzma
> LZMA_TEXT_START=0x80500000 LZMA_STARTUP_ORG=0 CONFIG_PASS_KARGS=
> CONFIG_BOARD= compile loader.bin
> make[6]: Entering directory
> '/DISK2/OPENWRT/2017/LEDE/rb133c/target/linux/adm5120/image/lzma-loader'
> make -C /DISK2/OPENWRT/2017/LEDE/rb133c/build_dir/target-mipsel_mips32_musl/linux-adm5120_router_le/lzma-loader
> CROSS_COMPILE="mipsel-openwrt-linux-musl-" \
>     LZMA_STARTUP_ORG=0 \
>     LZMA_TEXT_START=0x80500000 \
>     LOADER_DATA=/DISK2/OPENWRT/2017/LEDE/rb133c/build_dir/target-mipsel_mips32_musl/linux-adm5120_router_le/vmlinux.lzma
> \
>     CONFIG_BOARD= \
>     CONFIG_PASS_KARGS= \
>     clean all
> make[7]: Entering directory
> '/DISK2/OPENWRT/2017/LEDE/rb133c/build_dir/target-mipsel_mips32_musl/linux-adm5120_router_le/lzma-loader'
> rm -f *.elf *.bin *.o
> mipsel-openwrt-linux-musl-gcc -D__KERNEL__ -Wall -Wstrict-prototypes
> -Wno-trigraphs -Os -fno-strict-aliasing -fno-common
> -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic -ffunction-sections
> -pipe -mlong-calls -fno-common -ffreestanding -fhonour-copts -mabi=32
> -march=mips32 -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap
> -DLOADADDR=0x80001000 -D_LZMA_PROB32 -DLZMA_WRAPPER=1 -D__ASSEMBLY__
> -DLZMA_STARTUP_ORG=0 -c -o head.o head.S
> mipsel-openwrt-linux-musl-gcc -D__KERNEL__ -Wall -Wstrict-prototypes
> -Wno-trigraphs -Os -fno-strict-aliasing -fno-common
> -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic -ffunction-sections
> -pipe -mlong-calls -fno-common -ffreestanding -fhonour-copts -mabi=32
> -march=mips32 -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap
> -DLOADADDR=0x80001000 -D_LZMA_PROB32 -DLZMA_WRAPPER=1 -c -o
> decompress.o decompress.c
> mipsel-openwrt-linux-musl-gcc -D__KERNEL__ -Wall -Wstrict-prototypes
> -Wno-trigraphs -Os -fno-strict-aliasing -fno-common
> -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic -ffunction-sections
> -pipe -mlong-calls -fno-common -ffreestanding -fhonour-copts -mabi=32
> -march=mips32 -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap
> -DLOADADDR=0x80001000 -D_LZMA_PROB32 -DLZMA_WRAPPER=1 -c -o board.o
> board.c
> mipsel-openwrt-linux-musl-gcc -D__KERNEL__ -Wall -Wstrict-prototypes
> -Wno-trigraphs -Os -fno-strict-aliasing -fno-common
> -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic -ffunction-sections
> -pipe -mlong-calls -fno-common -ffreestanding -fhonour-copts -mabi=32
> -march=mips32 -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap
> -DLOADADDR=0x80001000 -D_LZMA_PROB32 -DLZMA_WRAPPER=1 -c -o printf.o
> printf.c
> mipsel-openwrt-linux-musl-gcc -D__KERNEL__ -Wall -Wstrict-prototypes
> -Wno-trigraphs -Os -fno-strict-aliasing -fno-common
> -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic -ffunction-sections
> -pipe -mlong-calls -fno-common -ffreestanding -fhonour-copts -mabi=32
> -march=mips32 -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap
> -DLOADADDR=0x80001000 -D_LZMA_PROB32 -DLZMA_WRAPPER=1 -c -o
> LzmaDecode.o LzmaDecode.c
> mipsel-openwrt-linux-musl-ld -r -b binary --oformat
> elf32-tradlittlemips -T lzma-data.lds -o data.o
> /DISK2/OPENWRT/2017/LEDE/rb133c/build_dir/target-mipsel_mips32_musl/linux-adm5120_router_le/vmlinux.lzma
> mipsel-openwrt-linux-musl-ld -static --gc-sections -no-warn-mismatch
> -e startup -T loader.lds -Ttext 0x80500000 -o loader.elf head.o
> decompress.o board.o printf.o LzmaDecode.o data.o
> mipsel-openwrt-linux-musl-objcopy -O binary -R .reginfo -R .note -R
> .comment -R .mdebug -S loader.elf loader.bin
> mipsel-openwrt-linux-musl-objcopy: Warning: Writing section `.text' to
> huge (ie negative) file offset 0xffffffff80500000.
> mipsel-openwrt-linux-musl-objcopy:loader.bin[.text]: File truncated
> make[7]: *** [Makefile:88: loader.bin] Error 1
> make[7]: Leaving directory
> '/DISK2/OPENWRT/2017/LEDE/rb133c/build_dir/target-mipsel_mips32_musl/linux-adm5120_router_le/lzma-loader'
> make[6]: *** [Makefile:37: loader-compile] Error 2
> make[6]: Leaving directory
> '/DISK2/OPENWRT/2017/LEDE/rb133c/target/linux/adm5120/image/lzma-loader'
> make[5]: *** [Makefile:128: kernel_prepare] Error 2
> make[5]: Leaving directory
> '/DISK2/OPENWRT/2017/LEDE/rb133c/target/linux/adm5120/image'
> make[4]: *** [Makefile:24: install] Error 2
> make[4]: Leaving directory
> '/DISK2/OPENWRT/2017/LEDE/rb133c/target/linux/adm5120'
> make[3]: *** [Makefile:13: install] Error 2
> make[3]: Leaving directory '/DISK2/OPENWRT/2017/LEDE/rb133c/target/linux'
> make[2]: *** [target/Makefile:25: target/linux/install] Error 2
> make[2]: Leaving directory '/DISK2/OPENWRT/2017/LEDE/rb133c'
> make[1]: *** [target/Makefile:19:
> /DISK2/OPENWRT/2017/LEDE/rb133c/staging_dir/target-mipsel_mips32_musl/stamp/.target_install]
> Error 2
> make[1]: Leaving directory '/DISK2/OPENWRT/2017/LEDE/rb133c'
> make: *** [/DISK2/OPENWRT/2017/LEDE/rb133c/include/toplevel.mk:201:
> world] Error 2
>
>
> Thank you for any input!