[LEDE-DEV] [PATCH] ar71xx: fix vlan settings for some boards

[John Crispin]

On 20/02/2017 19:31, Piotr Dymacz wrote:
> Hello,
> 
> 2017-02-20 13:11 GMT+01:00 Conor O'Gorman <i at conorogorman.net>:
>> On 18/02/17 14:32, Weijie Gao wrote:
>>>
>>> For AR71XX devices, GMAC1 always connects port 0 of the built-in switch,
>>> as the CPU port.
>>>
>>> This patch sets correct vlan for some devices with wrong settings:
>>> a) mark port 0 as CPU port, tagged
>>> b) reverse port order, marking these ports untagged
>>>
>> This change affects all these boards:
>>     dir-615-i1|\
>>     omy-g1|\
>>     r6100|\
>>     smart-300|\
>>     tl-mr3420-v2|\
>>     tl-wdr6500-v2|\
>>     tl-wr841n-v8|\
>>     tl-wr940n-v4|\
>>     tl-wr941nd-v5|\
>>     tl-wr941nd-v6|\
>>     wnr1000-v2|\
>>     wnr2000-v4|\
>>     wnr2200|\
>>     wnr612-v2|\
>>     wpn824n)
>>
>> Which ones have you tested?
> 
> At least for TL-WR841N v8 and TL-MR3420 v2 switch port mapping should be:
> "0 at eth1" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3"
> 
> ---
> Cheers,
> Piotr
> 
> _______________________________________________
> Lede-dev mailing list
> Lede-dev at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/lede-dev
> 

looks like i merged this too early, i had a look at the file beforehand
and concluded that only one board was changed, apparently it was too
early. i'll revert the commit

	John