[LEDE-DEV] LEDE v17.01.0 schedule adjusted

Russell Senior russell at personaltelco.net
Wed Feb 15 14:03:03 PST 2017


>>>>> "Russell" == Russell Senior <russell at personaltelco.net> writes:

>>>>> "David" == David Woodhouse <dwmw2 at infradead.org> writes:
David> On Wed, 2017-02-15 at 12:52 -0800, Russell Senior wrote:
>>> I last built on February 1, circa r3226, and that works.

David> But not with an out-of-the-box configuration anyway, right?

Russell> Pretty much.  This was my .config stub:

Russell>  CONFIG_TARGET_x86=y CONFIG_TARGET_x86_geode=y CONFIG_DEVEL=y
Russell> CONFIG_BUILD_LOG=y

I just tried r3499 (master branch), and it works too, although I do see
this stack trace during boot:

[...]
[   10.578574] kmodloader: loading kernel modules from /etc/modules.d/*
[   10.600627] ------------[ cut here ]------------
[   10.614641] WARNING: CPU: 0 PID: 674 at drivers/base/dd.c:344 driver_probe_device+0x58/0x1a5
[   10.640008] Modules linked in: geode_aes(+) cbc button_hotplug aead cryptomgr crypto_null
[   10.665186] CPU: 0 PID: 674 Comm: kmodloader Not tainted 4.9.8 #0
[   10.683549]  00000000 c102aed4 00000158 00000009 cf8d1064 d0884794 00000001 d0884794
[   10.707317]  c102af54 00000009 00000000 00000000 c11988e7 cf8d1064 d0884794 cf8d1098
[   10.731207]  c13f5a00 c1198a89 00000000 d0884794 00000000 c11977f3 cf81ea0c cf9077b0
[   10.755074] Call Trace:
[   10.762538]  [<c102aed4>] ? __warn+0xa9/0xc0
[   10.775470]  [<c102af54>] ? warn_slowpath_null+0xf/0x13
[   10.791246]  [<c11988e7>] ? driver_probe_device+0x58/0x1a5
[   10.807742]  [<c1198a89>] ? __driver_attach+0x55/0x70
[   10.823014]  [<c11977f3>] ? bus_for_each_dev+0x47/0x63
[   10.838547]  [<c1198606>] ? driver_attach+0x11/0x13
[   10.853314]  [<c1198a34>] ? driver_probe_device+0x1a5/0x1a5
[   10.870084]  [<c1198327>] ? bus_add_driver+0xa7/0x17f
[   10.885353]  [<d0886000>] ? 0xd0886000
[   10.896710]  [<c1198e98>] ? driver_register+0x6c/0x9d
[   10.911921]  [<c1000479>] ? do_one_initcall+0x85/0x110
[   10.927447]  [<c103530e>] ? call_usermodehelper_exec+0xc5/0xd0
[   10.945058]  [<c108b67a>] ? free_vmap_area_noflush+0x26/0x63
[   10.962170]  [<c109191a>] ? kmem_cache_alloc+0x58/0x7c
[   10.977650]  [<c106e1a1>] ? do_init_module+0x42/0x18d
[   10.992925]  [<c105a9e2>] ? load_module+0x12a1/0x161f
[   11.008186]  [<c105adec>] ? SyS_init_module+0x8c/0xa3
[   11.023392]  [<c1000ec5>] ? do_fast_syscall_32+0x83/0xe1
[   11.039475]  [<c12bf30e>] ? sysenter_past_esp+0x47/0x75
[   11.055232] ---[ end trace fd70a030d2f480e5 ]---
[   11.069901] Geode LX AES 0000:00:01.2: GEODE AES engine enabled.
[...]


-- 
Russell Senior, President
russell at personaltelco.net



More information about the Lede-dev mailing list