[LEDE-DEV] witi problem how to track and report

[davidea]

hi people, i have a witi routerboard from mqmaker, yesterday i've 
managed to install lede, and start to study it.

i know it has a lot of problem, then how i can track it and report?


the first problemi is that the reboot command doesn't work as aspected


BusyBox v1.25.1 () built-in shell (ash)

      _________
     /        /\      _    ___ ___  ___
    /  LE    /  \    | |  | __|   \| __|
   /    DE  /    \   | |__| _|| |) | _|
  /________/  LE  \  |____|___|___/|___| lede-project.org
  \        \   DE /
   \    LE  \    / 
-----------------------------------------------------------
    \  DE    \  /    Reboot (17.01.0-rc1, r3042-ec095b5)
     \________\/ -----------------------------------------------------------

root at lede:/#
root at lede:/# reboot
root at lede:/# [38735.890000] br-lan: port 2(wlan0) entered disabled state
[38735.900000] br-lan: port 3(wlan1) entered disabled state
[38735.910000] br-lan: port 1(eth0.1) entered disabled state
[38735.930000] device eth0.1 left promiscuous mode
[38735.940000] br-lan: port 1(eth0.1) entered disabled state
[38735.950000] IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready
[38736.040000] device wlan0 left promiscuous mode
[38736.040000] br-lan: port 2(wlan0) entered disabled state
[38736.060000] device wlan1 left promiscuous mode
[38736.070000] br-lan: port 3(wlan1) entered disabled state
[38736.280000] device eth0 left promiscuous mode
[38740.620000] reboot: Restarting system

it hangs here , and i must cycle the power off and on


second problem, the second wan port doesn't work , someone may tell me 
the state of the art about it?


this night i've tried to switch the wifi 5 ghz channel and not all 
channel works (it seems do not change the channel or switch off the 
radio, how i can increse the log level about the wifi process??

setting channel from 36 to 48 , the frequency seems to be the same, and 
if i set to channel 52 it disappears


root at lede:/# iw dev wlan0 info
Interface wlan0
         ifindex 12
         wdev 0x4
         addr 00:00:99:c6:58:fb
         type AP
         wiphy 0
         channel 52 (5260 MHz), width: 80 MHz, center1: 5290 MHz
         txpower 14.00 dBm


thanks