[LEDE-DEV] ar71xx: tl-wr940n v4: invalid default switch config

[Piotr Dymacz]

Hi Daniel,

Default network configuration under ar71xx needs adjustment/fix, because of [1].

[1] https://github.com/lede-project/source/commit/73d923ed6baabe3f8844f13216c50a6383a79a46

Cheers,
Piotr

2017-02-06 22:29 GMT+01:00 daniel <daniel at dd-wrt.com>:
> I just flashed a brand new tl-wr940n and the network wasn't configured
> correctly on the first boot.
> I needed to start it in recovery mode, otherwise LAN was not reachable.
>
> This is the generated invalid default config:
> ---
> ...
> config interface 'lan'
>         option type 'bridge'
>         option ifname 'eth1 eth1.1'
>         option proto 'static'
>         option ipaddr '192.168.1.1'
>         option netmask '255.255.255.0'
>         option ip6assign '60'
>
> config switch
>         option name 'switch0'
>         option reset '1'
>         option enable_vlan '1'
>
> config switch_vlan
>         option device 'switch0'
>         option vlan '1'
>         option ports '0 1 2 3 4t'
>
> ...
> ---
>
> I changed it to this one an now LAN + WAN is working properly.
> ---
> ...
> config interface 'lan'
>         option type 'bridge'
>         option ifname 'eth1'
>         option proto 'static'
>         option ipaddr '192.168.1.1'
>         option netmask '255.255.255.0'
>         option ip6assign '60'
>
> config switch
>         option name 'switch0'
>         option reset '1'
>         option enable_vlan '1'
>
> config switch_vlan
>         option device 'switch0'
>         option vlan '1'
>         option ports '0 1 2 3 4'
> ...
> ---
>
>
> Somebody here has the same router and can verify this ?
>
> --
> Regards
>
> Daniel Danzberger
> embeDD GmbH, Breitenweg 10, CH-6370 Stans
>
> _______________________________________________
> Lede-dev mailing list
> Lede-dev at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/lede-dev