[LEDE-DEV] [PATCH] ar71xx: Support for TP-LINK MR6400
Filip Moc
lede at moc6.cz
Sat Feb 4 05:54:26 PST 2017
>From 2a930f515c38069c2e57ef76f0ffe0d8e2ab115a Mon Sep 17 00:00:00 2001
From: Filip Moc <lede at moc6.cz>
Date: Sat, 4 Feb 2017 14:37:08 +0100
Subject: [LEDE-DEV] [PATCH] ar71xx: Support for TP-LINK MR6400
Add support for TP-Link MR6400
Everything seems to be working.
You can flash via u-boot tftp (serve factory image as /mr6400_tp_recovery.bin
on 192.168.0.66/24, connect to any ethernet port and power on device while
holding the reset button).
File ar71xx/base-files/etc/init.d/enablemodem is based on
ramips/base-files/etc/init.d/enablemodem. Code of enablemodem does not seem
to be platform specific and I think it should be shared.
I suggest merging these files and moving result to adb package.
Another question is how to get board info.
Maybe from `cat /tmp/sysinfo/board_name` or from '/etc/board.json'?
--
2.1.4
>From 2a930f515c38069c2e57ef76f0ffe0d8e2ab115a Mon Sep 17 00:00:00 2001
From: Filip Moc <lede at moc6.cz>
Date: Sat, 4 Feb 2017 10:31:06 +0100
Subject: [PATCH] Add support for TL-MR6400
Signed-off-by: Filip Moc <lede at moc6.cz>
---
target/linux/ar71xx/base-files/etc/board.d/01_leds | 6 +
.../linux/ar71xx/base-files/etc/board.d/02_network | 5 +
target/linux/ar71xx/base-files/etc/diag.sh | 3 +
.../linux/ar71xx/base-files/etc/init.d/enablemodem | 17 +++
target/linux/ar71xx/base-files/lib/ar71xx.sh | 6 +
.../ar71xx/base-files/lib/upgrade/platform.sh | 1 +
target/linux/ar71xx/config-4.4 | 1 +
.../ar71xx/files/arch/mips/ath79/Kconfig.openwrt | 10 ++
target/linux/ar71xx/files/arch/mips/ath79/Makefile | 1 +
.../ar71xx/files/arch/mips/ath79/mach-tl-mr6400.c | 162 +++++++++++++++++++++
.../linux/ar71xx/files/arch/mips/ath79/machtypes.h | 1 +
target/linux/ar71xx/image/tp-link.mk | 11 ++
12 files changed, 224 insertions(+)
create mode 100755 target/linux/ar71xx/base-files/etc/init.d/enablemodem
create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr6400.c
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index b1ecb02..df9fbb9 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -542,6 +542,12 @@ tl-wr941nd-v5)
;;
esac
;;
+tl-mr6400)
+ ucidef_set_led_netdev "lan" "LAN" "tp-link:white:lan" "eth0"
+ ucidef_set_led_netdev "wan" "WAN" "tp-link:white:wan" "eth1"
+ ucidef_set_led_netdev "4g" "4G" "tp-link:white:4g" "usb0"
+ ucidef_set_led_wlan "wlan" "WLAN" "tp-link:white:wlan" "phy0tpt"
+ ;;
tl-wa7210n-v2)
ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
ucidef_set_rssimon "wlan0" "200000" "1"
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index 976440e..ac115bd 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -291,6 +291,11 @@ ar71xx_setup_interfaces()
ucidef_add_switch "switch0" \
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4 at eth1"
;;
+ tl-mr6400)
+ ucidef_set_interfaces_lan_wan "eth0 eth1" "usb0"
+ ucidef_add_switch "switch0" \
+ "0 at eth0" "1:lan" "2:lan" "3:lan"
+ ;;
dir-825-b1|\
nbg460n_550n_550nh|\
tew-673gru|\
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index edcf621..81f7b49 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -339,6 +339,9 @@ get_status_led() {
tl-wa860re)
status_led="tp-link:green:power"
;;
+ tl-mr6400)
+ status_led="tp-link:white:power"
+ ;;
tl-mr3220|\
tl-mr3220-v2|\
tl-mr3420|\
diff --git a/target/linux/ar71xx/base-files/etc/init.d/enablemodem b/target/linux/ar71xx/base-files/etc/init.d/enablemodem
new file mode 100755
index 0000000..0ec07c7
--- /dev/null
+++ b/target/linux/ar71xx/base-files/etc/init.d/enablemodem
@@ -0,0 +1,17 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+
+start() {
+ . /lib/ar71xx.sh
+
+ local board=$(ar71xx_board_name)
+ if [ $board = "tl-mr6400" ]; then
+ adb wait-for-device
+ adb shell chmod +x /WEBSERVER/www/cgi-bin/*
+ adb shell httpd -h /WEBSERVER/www/ &
+ echo "2357 000d" > /sys/bus/usb-serial/drivers/option1/new_id
+ sleep 2
+ adb kill-server
+ fi
+}
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 3ca2c0d..f39a35c 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -294,6 +294,9 @@ tplink_board_detect() {
"342000"*)
model="TP-Link TL-MR3420"
;;
+ "640000"*)
+ model="TP-Link TL-MR6400"
+ ;;
"332000"*)
model="TP-Link TL-WDR3320"
;;
@@ -971,6 +974,9 @@ ar71xx_board_detect() {
*"TL-MR3420 v2")
name="tl-mr3420-v2"
;;
+ *TL-MR6400)
+ name="tl-mr6400"
+ ;;
*"TL-WA701ND v2")
name="tl-wa701nd-v2"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index cf2aab2..0c7108d 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -393,6 +393,7 @@ platform_check_image() {
tl-mr3220|\
tl-mr3420-v2|\
tl-mr3420|\
+ tl-mr6400|\
tl-wa701nd-v2|\
tl-wa7210n-v2|\
tl-wa750re|\
diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4
index 8ba0c2a..048580c 100644
--- a/target/linux/ar71xx/config-4.4
+++ b/target/linux/ar71xx/config-4.4
@@ -167,6 +167,7 @@ CONFIG_ATH79_MACH_TL_MR11U=y
CONFIG_ATH79_MACH_TL_MR13U=y
CONFIG_ATH79_MACH_TL_MR3020=y
CONFIG_ATH79_MACH_TL_MR3X20=y
+CONFIG_ATH79_MACH_TL_MR6400=y
CONFIG_ATH79_MACH_TL_WA701ND_V2=y
CONFIG_ATH79_MACH_TL_WA7210N_V2=y
CONFIG_ATH79_MACH_TL_WA801ND_V3=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index 8b6554c..e79bb6a 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -1336,6 +1336,16 @@ config ATH79_MACH_TL_MR3X20
select ATH79_DEV_M25P80
select ATH79_DEV_USB
+config ATH79_MACH_TL_MR6400
+ bool "TP-LINK TL-MR6400 support"
+ select SOC_QCA953X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_TL_WAX50RE
bool "TP-LINK TL-WA750/850RE support"
select SOC_AR934X
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index e9d69a4..3457eab 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -171,6 +171,7 @@ obj-$(CONFIG_ATH79_MACH_TL_MR11U) += mach-tl-mr11u.o
obj-$(CONFIG_ATH79_MACH_TL_MR13U) += mach-tl-mr13u.o
obj-$(CONFIG_ATH79_MACH_TL_MR3020) += mach-tl-mr3020.o
obj-$(CONFIG_ATH79_MACH_TL_MR3X20) += mach-tl-mr3x20.o
+obj-$(CONFIG_ATH79_MACH_TL_MR6400) += mach-tl-mr6400.o
obj-$(CONFIG_ATH79_MACH_TL_WA701ND_V2) += mach-tl-wa701nd-v2.o
obj-$(CONFIG_ATH79_MACH_TL_WA7210N_V2) += mach-tl-wa7210n-v2.o
obj-$(CONFIG_ATH79_MACH_TL_WA801ND_V3) += mach-tl-wa801nd-v3.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr6400.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr6400.c
new file mode 100644
index 0000000..d9ec576
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr6400.c
@@ -0,0 +1,162 @@
+/*
+ * TP-LINK TL-MR6400 board support
+ *
+ * Copyright (C) 2017 Filip Moc <lede at moc6.cz>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+ * EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+ * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-gpio-buttons.h"
+#include "dev-eth.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define TL_MR6400_GPIO_LTE_POWER 4
+#define TL_MR6400_GPIO_BTN_RESET 12 /* SW2 */
+#define TL_MR6400_GPIO_BTN_RFKILL 14 /* SW3 */
+#define TL_MR6400_GPIO_LED_WAN 0 /* D12 */
+#define TL_MR6400_GPIO_LED_4G 1 /* D11 */
+#define TL_MR6400_GPIO_LED_WPS 3 /* D5 */
+#define TL_MR6400_GPIO_LED_WLAN 11 /* D3 */
+#define TL_MR6400_GPIO_LED_POWER 13 /* D2 */
+#define TL_MR6400_GPIO_LED_LAN 16 /* D4 */
+
+#define TL_MR6400_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_MR6400_KEYS_DEBOUNCE_INTERVAL (3 * TL_MR6400_KEYS_POLL_INTERVAL)
+
+#define TL_MR6400_WMAC_CALDATA_OFFSET 0x1000
+
+static const char *tl_mr6400_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data tl_mr6400_flash_data = {
+ .part_probes = tl_mr6400_part_probes,
+};
+
+static struct gpio_led tl_mr6400_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:white:wan",
+ .gpio = TL_MR6400_GPIO_LED_WAN,
+ .active_low = 0,
+ },
+ {
+ .name = "tp-link:white:4g",
+ .gpio = TL_MR6400_GPIO_LED_4G,
+ .active_low = 0,
+ },
+ {
+ .name = "tp-link:white:wps",
+ .gpio = TL_MR6400_GPIO_LED_WPS,
+ .active_low = 0,
+ },
+ {
+ .name = "tp-link:white:wlan",
+ .gpio = TL_MR6400_GPIO_LED_WLAN,
+ .active_low = 0,
+ },
+ {
+ .name = "tp-link:white:power",
+ .gpio = TL_MR6400_GPIO_LED_POWER,
+ .active_low = 0,
+ },
+ {
+ .name = "tp-link:white:lan",
+ .gpio = TL_MR6400_GPIO_LED_LAN,
+ .active_low = 0,
+ },
+};
+
+static struct gpio_keys_button tl_mr6400_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_MR6400_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_MR6400_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+ {
+ .desc = "rfkill",
+ .type = EV_KEY,
+ .code = KEY_RFKILL,
+ .debounce_interval = TL_MR6400_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_MR6400_GPIO_BTN_RFKILL,
+ .active_low = 1,
+ },
+};
+
+static void __init tl_mr6400_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_register_m25p80(&tl_mr6400_flash_data);
+
+ ath79_register_mdio(0, 0x0);
+
+ /* LAN1, LAN2, LAN3 */
+ ath79_switch_data.phy4_mii_en = 1;
+ ath79_switch_data.phy_poll_mask |= BIT(0);
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
+ ath79_register_eth(1);
+
+ /* LAN4 / WAN */
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
+ ath79_register_eth(0);
+
+ ath79_register_wmac(art + TL_MR6400_WMAC_CALDATA_OFFSET, mac);
+
+ ath79_register_leds_gpio(-1,
+ ARRAY_SIZE(tl_mr6400_leds_gpio),
+ tl_mr6400_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1,
+ TL_MR6400_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_mr6400_gpio_keys),
+ tl_mr6400_gpio_keys);
+
+ gpio_request_one(TL_MR6400_GPIO_LTE_POWER,
+ GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED | GPIOF_ACTIVE_LOW,
+ "LTE power");
+ ath79_register_usb();
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_MR6400, "TL-MR6400", "TP-LINK TL-MR6400",
+ tl_mr6400_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index 12e81db..e8452d5 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -194,6 +194,7 @@ enum ath79_mach_type {
ATH79_MACH_TL_MR3220_V2, /* TP-LINK TL-MR3220 v2 */
ATH79_MACH_TL_MR3420, /* TP-LINK TL-MR3420 */
ATH79_MACH_TL_MR3420_V2, /* TP-LINK TL-MR3420 v2 */
+ ATH79_MACH_TL_MR6400, /* TP-LINK TL-MR6400 */
ATH79_MACH_TL_WA701ND_V2, /* TP-LINK TL-WA701ND v2 */
ATH79_MACH_TL_WA7210N_V2, /* TP-LINK TL-WA7210N v2 */
ATH79_MACH_TL_WA750RE, /* TP-LINK TL-WA750RE */
diff --git a/target/linux/ar71xx/image/tp-link.mk b/target/linux/ar71xx/image/tp-link.mk
index 4d95f48..d6494df 100644
--- a/target/linux/ar71xx/image/tp-link.mk
+++ b/target/linux/ar71xx/image/tp-link.mk
@@ -452,6 +452,17 @@ define Device/tl-mr3420-v2
endef
TARGET_DEVICES += tl-mr3020-v1 tl-mr3040-v1 tl-mr3040-v2 tl-mr3220-v1 tl-mr3220-v2 tl-mr3420-v1 tl-mr3420-v2
+define Device/tl-mr6400-v1
+ $(Device/tplink-8mlzma)
+ DEVICE_TITLE := TP-Link TL-MR6400 v1
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-net kmod-usb-net-rndis kmod-usb-serial kmod-usb-serial-option adb
+ BOARDNAME := TL-MR6400
+ DEVICE_PROFILE := TLMR6400
+ TPLINK_HWID := 0x64000001
+endef
+TARGET_DEVICES += tl-mr6400-v1
+
+
define Device/tl-wpa8630
$(Device/tplink-8mlzma)
DEVICE_TITLE := TP-LINK TL-WPA8630
--
2.1.4
More information about the Lede-dev
mailing list