[LEDE-DEV] compile hostapd/wpa_supplicant with mesh and sae options

[Carlito Nueno]

I just noticed that when mesh is enabled on wlan0, the ap part does
not work. wlan0-ap does not broadcast ssid.

this is using the wpad-mesh package.

config wifi-iface 'wlan0_ap_radio0'
        option mode 'ap'
        option device 'radio0'
        option network 'lan'
        option ifname 'wlan0-ap'
        option ssid 'mssid'
        option encryption 'psk2+aes'
        option key 'passwd'

config wifi-iface 'wlan0_mesh_radio0'
        option mode 'mesh'
        option device 'radio0'
        option network 'wlan0_mesh_if'
        option ifname 'wlan0-mesh'
        option mesh_id 'mmesh'
        option encryption 'psk2+aes'
        option key 'mpasswd'

On Sun, Dec 10, 2017 at 9:15 PM, Carlito Nueno <carlitonueno at gmail.com> wrote:
> I am testing with wpad-mesh and nodes are connecting and I can ping
> each node, but logread shows below notice ONLY when mesh iface has
> encryption on.
>
> Mon Dec 11 02:54:38 2017 daemon.notice hostapd: handle_probe_req: send failed
> Mon Dec 11 02:54:38 2017 daemon.notice hostapd: handle_probe_req: send failed
>
> On Sun, Dec 10, 2017 at 11:20 AM, Carlito Nueno <carlitonueno at gmail.com> wrote:
>> Thanks! I’ll give it a go and report back.
>>
>> On Sunday, December 10, 2017, Felix Fietkau <nbd at nbd.name> wrote:
>>>
>>> On 2017-12-10 20:03, Carlito Nueno wrote:
>>> > So wpad-mesh can do WPA2 enterprise, EAP and radius? I thought it was
>>> > like wpad-mini plus 80211s features.
>>> It's like wpad + 802.11s, so it should be able to do what you need.
>>>
>>> - Felix