[LEDE-DEV] [PATCH] ar71xx: add support for GL.iNet GL-AR750
Piotr Dymacz
pepe2k at gmail.com
Tue Dec 5 23:10:59 PST 2017
Hello Luochongjun,
On 06.12.2017 07:47, Luochongjun wrote:
> From: Luochongjun <1464691921 at qq.com>
>
> This patch adds supports for the GL.iNet GL-AR750
Thanks for your patch.
I have support for this device in my staging tree [1]. I will look at
your patch and add missing parts (like I2C over GPIO).
[1] https://git.lede-project.org/?p=lede/pepe2k/staging.git;a=summary
--
Cheers,
Piotr
>
> Specifiation:
> - SoC: QCA9531 at 650 MHz
> - Flash: 16 MiB (W25Q128FVSG)
> - RAM: 128 MiB DDR
> - Ethernet: 1 x WAN (100 Mbps) and 2 x LAN (100 Mbps)
> - USB: 1 x USB 2.0 port
> - Button: 1 x switch button, 1 x reset button
> - LED: 3 x LEDS
> - UART: 1 x UART on PCB (JP1: GND, RX, TX, 3.3V)
>
> Installation through Luci:
> - The original firmware is LEDE, so both LuCI or sysupgrade can be used.
> - Do not keep settings, for sysupgrade please use the -n option.
>
> Installation through bootloader webserver:
> - Plug power and hold reset button until red LED blink to bright.
> - Install sysupgrade image using web interface on 192.168.1.1.
>
> Signed-off-by: chongjun Luo <1464691921 at qq.com>
> ---
> target/linux/ar71xx/base-files/etc/board.d/01_leds | 4 +
> .../linux/ar71xx/base-files/etc/board.d/02_network | 1 +
> target/linux/ar71xx/base-files/etc/diag.sh | 3 +-
> .../etc/hotplug.d/firmware/11-ath10k-caldata | 4 +
> target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 +
> .../ar71xx/base-files/lib/upgrade/platform.sh | 1 +
> target/linux/ar71xx/config-4.4 | 1 +
> .../ar71xx/files/arch/mips/ath79/Kconfig.openwrt | 10 ++
> target/linux/ar71xx/files/arch/mips/ath79/Makefile | 1 +
> .../ar71xx/files/arch/mips/ath79/mach-gl-ar750.c | 187 +++++++++++++++++++++
> .../linux/ar71xx/files/arch/mips/ath79/machtypes.h | 1 +
> target/linux/ar71xx/image/generic.mk | 10 ++
> 12 files changed, 225 insertions(+), 1 deletion(-)
> mode change 100644 => 100755 target/linux/ar71xx/base-files/etc/diag.sh
> mode change 100644 => 100755 target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
> mode change 100644 => 100755 target/linux/ar71xx/config-4.4
> mode change 100644 => 100755 target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
> mode change 100644 => 100755 target/linux/ar71xx/files/arch/mips/ath79/Makefile
> create mode 100755 target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar750.c
> mode change 100644 => 100755 target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
> mode change 100644 => 100755 target/linux/ar71xx/image/generic.mk
>
> diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
> index e5baa90..c948902 100755
> --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
> +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
> @@ -391,6 +391,10 @@ dlan-pro-1200-ac)
> gl-ar300m)
> ucidef_set_led_wlan "wlan" "WLAN" "$board:red:wlan" "phy0tpt"
> ;;
> +gl-ar750)
> + ucidef_set_led_wlan "wlan-2g" "WLAN-2G" "gl-ar750:wlan-2g" "phy1tpt"
> + ucidef_set_led_wlan "wlan-5g" "WLAN-5G" "gl-ar750:wlan-5g" "phy0tpt"
> + ;;
> gl-mifi)
> ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
> ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0"
> diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
> index 7cf4212..01887f2 100755
> --- a/target/linux/ar71xx/base-files/etc/board.d/02_network
> +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
> @@ -145,6 +145,7 @@ ar71xx_setup_interfaces()
> dr344|\
> gl-ar150|\
> gl-ar300m|\
> + gl-ar750|\
> gl-domino|\
> gl-inet|\
> gl-mifi|\
> diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
> old mode 100644
> new mode 100755
> index 6cbb357..6e5341d
> --- a/target/linux/ar71xx/base-files/etc/diag.sh
> +++ b/target/linux/ar71xx/base-files/etc/diag.sh
> @@ -75,7 +75,7 @@ get_status_led() {
> ap90q|\
> cpe830|\
> cpe870|\
> - gl-ar300m|\
> + gl-ar300m|\
> gl-inet|\
> gl-mifi)
> status_led="$board:green:lan"
> @@ -521,6 +521,7 @@ set_state() {
> done)
> status_led_on
> case $(board_name) in
> + gl-ar750|\
> gl-ar300m)
> fw_printenv lc >/dev/null 2>&1 && fw_setenv "bootcount" 0
> ;;
> diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
> old mode 100644
> new mode 100755
> index 6a0a59f..d0e7b76
> --- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
> +++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
> @@ -81,6 +81,10 @@ case "$FIRMWARE" in
> ath10kcal_extract "art" 20480 2116
> ath10kcal_patch_mac $(mtd_get_mac_binary art 18)
> ;;
> + gl-ar750)
> + ath10kcal_extract "art" 20480 2116
> + ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0) +1)
> + ;;
> epg5000|\
> esr1750)
> ath10kcal_extract "caldata" 20480 2116
> diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
> index 285fa68..ab37979 100755
> --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
> +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
> @@ -670,6 +670,9 @@ ar71xx_board_detect() {
> *"GL-AR300M")
> name="gl-ar300m"
> ;;
> + *"GL-AR750")
> + name="gl-ar750"
> + ;;
> *"GL-CONNECT INET v1")
> name="gl-inet"
>
> diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> index 172a58b..6d84659 100755
> --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> @@ -249,6 +249,7 @@ platform_check_image() {
> ew-dorin|\
> ew-dorin-router|\
> gl-ar150|\
> + gl-ar750|\
> gl-ar300m|\
> gl-ar300|\
> gl-domino|\
> diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4
> old mode 100644
> new mode 100755
> index 3ba3853..909dca6
> --- a/target/linux/ar71xx/config-4.4
> +++ b/target/linux/ar71xx/config-4.4
> @@ -115,6 +115,7 @@ CONFIG_ATH79_MACH_FRITZ300E=y
> CONFIG_ATH79_MACH_GL_AR150=y
> CONFIG_ATH79_MACH_GL_AR300=y
> CONFIG_ATH79_MACH_GL_AR300M=y
> +CONFIG_ATH79_MACH_GL_AR750=y
> CONFIG_ATH79_MACH_GL_DOMINO=y
> CONFIG_ATH79_MACH_GL_INET=y
> CONFIG_ATH79_MACH_GL_MIFI=y
> diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
> old mode 100644
> new mode 100755
> index 1198fcb..e156536
> --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
> +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
> @@ -761,6 +761,16 @@ config ATH79_MACH_GL_AR300M
> select ATH79_DEV_USB
> select ATH79_DEV_WMAC
>
> +config ATH79_MACH_GL_AR750
> + bool "GL_AR750 support"
> + select SOC_QCA953X
> + select ATH79_DEV_ETH
> + select ATH79_DEV_GPIO_BUTTONS
> + select ATH79_DEV_LEDS_GPIO
> + select ATH79_DEV_M25P80
> + select ATH79_DEV_USB
> + select ATH79_DEV_WMAC
> +
> config ATH79_MACH_GL_DOMINO
> bool "DOMINO support"
> select SOC_AR933X
> diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
> old mode 100644
> new mode 100755
> index 455af76..f3edcba
> --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
> +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
> @@ -121,6 +121,7 @@ obj-$(CONFIG_ATH79_MACH_FRITZ300E) += mach-fritz300e.o
> obj-$(CONFIG_ATH79_MACH_GL_AR150) += mach-gl-ar150.o
> obj-$(CONFIG_ATH79_MACH_GL_AR300) += mach-gl-ar300.o
> obj-$(CONFIG_ATH79_MACH_GL_AR300M) += mach-gl-ar300m.o
> +obj-$(CONFIG_ATH79_MACH_GL_AR750) += mach-gl-ar750.o
> obj-$(CONFIG_ATH79_MACH_GL_DOMINO) += mach-gl-domino.o
> obj-$(CONFIG_ATH79_MACH_GL_INET) += mach-gl-inet.o
> obj-$(CONFIG_ATH79_MACH_GL_MIFI) += mach-gl-mifi.o
> diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar750.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar750.c
> new file mode 100755
> index 0000000..6c04933
> --- /dev/null
> +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar750.c
> @@ -0,0 +1,187 @@
> +/*
> + * GLI AR750 board support
> + *
> + * Copyright (C) 2011 dongyuqi <729650915 at qq.com>
> + * Copyright (C) 2011-2012 Gabor Juhos <juhosg at openwrt.org>
> + * Copyright (C) 2013 alzhao <alzhao at gmail.com>
> + * Copyright (C) 2014 Michel Stempin <michel.stempin at wanadoo.fr>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published
> + * by the Free Software Foundation.
> + */
> +
> +#include <linux/gpio.h>
> +#include <linux/pci.h>
> +
> +#include <asm/mach-ath79/ath79.h>
> +#include <asm/mach-ath79/ar71xx_regs.h>
> +#include <linux/i2c.h>
> +#include <linux/i2c-gpio.h>
> +#include <linux/platform_device.h>
> +
> +#include "common.h"
> +#include "dev-ap9x-pci.h"
> +#include "dev-eth.h"
> +#include "dev-gpio-buttons.h"
> +#include "dev-leds-gpio.h"
> +#include "dev-m25p80.h"
> +#include "dev-usb.h"
> +#include "dev-spi.h"
> +#include "dev-wmac.h"
> +#include "machtypes.h"
> +#include "pci.h"
> +
> +#define GL_AR750_GPIO_LED_USB 2
> +#define GL_AR750_GPIO_LED_WLAN 13
> +#define GL_AR750_GPIO_LED_LAN 14
> +#define GL_AR750_GPIO_LED_SYSTEM 12
> +#define GL_AR750_GPIO_BTN_RESET 3
> +#define GL_AR750_GPIO_BTN_LEFT 0
> +#define GL_AR750_GPIO_BTN_RIGHT 1
> +
> +#define GL_AR750_GPIO_I2C_SCL 16
> +#define GL_AR750_GPIO_I2C_SDA 17
> +
> +#define GL_AR750_KEYS_POLL_INTERVAL 20 /* msecs */
> +#define GL_AR750_KEYS_DEBOUNCE_INTERVAL (3 * GL_AR750_KEYS_POLL_INTERVAL)
> +
> +#define GL_AR750_MAC0_OFFSET 0
> +#define GL_AR750_MAC1_OFFSET 6
> +#define GL_AR750_WMAC_CALDATA_OFFSET 0x1000
> +#define GL_AR750_PCIE_CALDATA_OFFSET 0x5000
> +
> +static struct gpio_led gl_ar750_leds_gpio[] __initdata = {
> + {
> + .name = "gl-ar750:usbpow",
> + .gpio = GL_AR750_GPIO_LED_USB,
> + .active_low = 0,
> + .default_state = 1,
> + },
> + {
> + .name = "gl-ar750:wlan-2g",
> + .gpio = GL_AR750_GPIO_LED_LAN,
> + .active_low = 1,
> + },
> + {
> + .name = "gl-ar750:wlan-5g",
> + .gpio = GL_AR750_GPIO_LED_WLAN,
> + .active_low = 1,
> + },
> + {
> + .name = "gl-ar750:system",
> + .gpio = GL_AR750_GPIO_LED_SYSTEM,
> + .active_low = 1,
> + .default_state = 1,
> + },
> +};
> +
> +static struct gpio_keys_button gl_ar750_gpio_keys[] __initdata = {
> + {
> + .desc = "reset",
> + .type = EV_KEY,
> + .code = KEY_RESTART,
> + .debounce_interval = GL_AR750_KEYS_DEBOUNCE_INTERVAL,
> + .gpio = GL_AR750_GPIO_BTN_RESET,
> + .active_low = 1,
> + },
> + {
> + .desc = "button right",
> + .type = EV_KEY,
> + .code = BTN_0,
> + .debounce_interval = GL_AR750_KEYS_DEBOUNCE_INTERVAL,
> + .gpio = GL_AR750_GPIO_BTN_LEFT,
> + .active_low = 0,
> + },
> + {
> + .desc = "button left",
> + .type = EV_KEY,
> + .code = BTN_1,
> + .debounce_interval = GL_AR750_KEYS_DEBOUNCE_INTERVAL,
> + .gpio = GL_AR750_GPIO_BTN_RIGHT,
> + .active_low = 0,
> + },
> +};
> +
> +static struct spi_board_info gl_ar750_spi_info[] = {
> + {
> + .bus_num = 0,
> + .chip_select = 0,
> + .max_speed_hz = 25000000,
> + .modalias = "m25p80",
> + .platform_data = NULL,
> + },
> + {
> + .bus_num = 0,
> + .chip_select = 1,
> + .max_speed_hz = 25000000,
> + .modalias = "ath79-spinand",
> + .platform_data = NULL,
> + }
> +};
> +
> +static struct ath79_spi_platform_data gl_ar750_spi_data = {
> + .bus_num = 0,
> + .num_chipselect = 2,
> +};
> +
> +static struct i2c_gpio_platform_data gl_ar750_i2c_gpio_data = {
> + .sda_pin = GL_AR750_GPIO_I2C_SDA,
> + .scl_pin = GL_AR750_GPIO_I2C_SCL,
> +};
> +
> +static struct platform_device gl_ar750_i2c_gpio_device = {
> + .name = "i2c-gpio",
> + .id = 0,
> + .dev = {
> + .platform_data = &gl_ar750_i2c_gpio_data,
> + }
> +};
> +
> +
> +static void __init gl_ar750_setup(void)
> +{
> + u8 *art = (u8 *) KSEG1ADDR(0x1f050000);
> + u8 tmpmac[ETH_ALEN];
> +
> + ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE);
> + ath79_register_spi(&gl_ar750_spi_data, gl_ar750_spi_info, 2);
> +
> + /* register gpio LEDs and keys */
> + ath79_register_leds_gpio(-1, ARRAY_SIZE(gl_ar750_leds_gpio),
> + gl_ar750_leds_gpio);
> + ath79_register_gpio_keys_polled(-1, GL_AR750_KEYS_POLL_INTERVAL,
> + ARRAY_SIZE(gl_ar750_gpio_keys),
> + gl_ar750_gpio_keys);
> +
> + ath79_register_mdio(0, 0x0);
> +
> + /* WAN */
> + ath79_init_mac(ath79_eth0_data.mac_addr, art + GL_AR750_MAC0_OFFSET, 0);
> + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
> + ath79_eth0_data.speed = SPEED_100;
> + ath79_eth0_data.duplex = DUPLEX_FULL;
> + ath79_eth0_data.phy_mask = BIT(4);
> + ath79_register_eth(0);
> +
> + /* LAN */
> + ath79_init_mac(ath79_eth1_data.mac_addr, art + GL_AR750_MAC0_OFFSET, 1);
> + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
> + ath79_eth1_data.speed = SPEED_1000;
> + ath79_eth1_data.duplex = DUPLEX_FULL;
> + ath79_switch_data.phy_poll_mask |= BIT(4);
> + ath79_switch_data.phy4_mii_en = 1;
> + ath79_register_eth(1);
> +
> + ath79_init_mac(tmpmac, art + GL_AR750_WMAC_CALDATA_OFFSET + 2, 0);
> + ath79_register_wmac(art + GL_AR750_WMAC_CALDATA_OFFSET, tmpmac);
> + /*register i2c*/
> + platform_device_register(&gl_ar750_i2c_gpio_device);
> + /* enable usb */
> + ath79_register_usb();
> + /* enable pci */
> + ath79_register_pci();
> +}
> +
> +MIPS_MACHINE(ATH79_MACH_GL_AR750, "GL-AR750", "GL-AR750",
> + gl_ar750_setup);
> diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
> old mode 100644
> new mode 100755
> index 0f536f0..0e2690e
> --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
> +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
> @@ -113,6 +113,7 @@ enum ath79_mach_type {
> ATH79_MACH_GL_AR150, /* GL-AR150 support */
> ATH79_MACH_GL_AR300, /* GL-AR300 */
> ATH79_MACH_GL_AR300M, /* GL-AR300M */
> + ATH79_MACH_GL_AR750, /* GL-AR750 */
> ATH79_MACH_GL_DOMINO, /* Domino */
> ATH79_MACH_GL_INET, /* GL-CONNECT GL-INET */
> ATH79_MACH_GL_MIFI, /* GL-MIFI support */
> diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk
> old mode 100644
> new mode 100755
> index eb6d6e5..ceb49a9
> --- a/target/linux/ar71xx/image/generic.mk
> +++ b/target/linux/ar71xx/image/generic.mk
> @@ -287,6 +287,16 @@ define Device/gl-ar300m
> endef
> TARGET_DEVICES += gl-ar300m
>
> +define Device/gl-ar750
> + DEVICE_TITLE := GL.iNet GL-AR750
> + DEVICE_PACKAGES := kmod-usb-core kmod-usb2 uboot-envtools
> + BOARDNAME = GL-AR750
> + IMAGE_SIZE = 16000k
> + CONSOLE = ttyS0,115200
> + MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(art)ro,16000k(firmware)
> +endef
> +TARGET_DEVICES += gl-ar750
> +
> define Device/gl-domino
> DEVICE_TITLE := GL.iNet Domino Pi
> DEVICE_PACKAGES := kmod-usb-core kmod-usb2
>
More information about the Lede-dev
mailing list