[LEDE-DEV] [PATCH 00/13] sunxi: upgrade to kernel 4.9 and add A64 support

[Luis Araneda]

On Wed, Aug 9, 2017 at 6:41 PM, Lucian Cristian <luci at createc.ro> wrote:
> On 09.08.2017 22:08, Hauke Mehrtens wrote:
>>
>> On 08/08/2017 01:13 AM, Lucian Cristian wrote:
>>>
>>> On 07.08.2017 19:47, Lucian Cristian wrote:
>>>>
>>>> On 07.08.2017 19:43, Hauke Mehrtens wrote:
>>>>>
>>>>> ...
>>>>> Hi Lucian,
>>>>>
>>>>> The eMMC version needs an extra device tree file, could you please use
>>>>> this one:
>>>>> arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts
>>>>>
>>>>> We should probably add two device one for the normal lime2 and one
>>>>> lime2-emmc.
>>>>>
>>>>> Hauke
>>>>
>>>> Yes, I know, on 4.4 it worked with or without emmc dts, but since it
>>>> wasn't merged I didn't made a patch for eMMC version, I'll return with
>>>> output asap
>>>>
>>>> Regards
>>>>
>>>>
>>>> _______________________________________________
>>>> Lede-dev mailing list
>>>> Lede-dev at lists.infradead.org
>>>> http://lists.infradead.org/mailman/listinfo/lede-dev
>>>
>>> So I made a test without the split and it worked, but on the same three
>>> with the split I didn't had an option for root partition size on
>>> menuconfig so I made a new git clone and I can confirm that is booting.
>>>
>>> Something must have been broken in my branch!
>>>
>>>
>>> Regards
>>>
>> Hi Lucian,
>>
>> So your device is now booting with my full patch series applied + your
>> change to add the lime2 emmc?
>>
>> Hauke
>>
>> _______________________________________________
>> Lede-dev mailing list
>> Lede-dev at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/lede-dev
>
>
> Yes !
>
>
> Regards
>
>
> _______________________________________________
> Lede-dev mailing list
> Lede-dev at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/lede-dev

Hi,

I've applied your patches, and I've made others to add support for the
Nanopi M1 Plus board, which uses an H3 SoC.
Everything seems working fine, even the WiFi card on the board
(.dts+nvram files).

Are you waiting for more testing to merge this to master? I'm
sure that almost all H3 based boards can be supported, at least at
some basic level.

Regards,

Luis Araneda.