[LEDE-DEV] [PATCH] ipq806x: Archer C2600: fix switch ports numbering

[Baptiste Jonglez]

From: Baptiste Jonglez <git at bitsofnetworks.org>

The order of LAN ports shown in Luci is reversed compared to what is
written on the case of the device.  Fix the order so that they match.

Signed-off-by: Baptiste Jonglez <git at bitsofnetworks.org>
---
This patch applies cleanly to the lede-17.01 branch and should
be backported there too.

 target/linux/ipq806x/base-files/etc/board.d/02_network | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/target/linux/ipq806x/base-files/etc/board.d/02_network b/target/linux/ipq806x/base-files/etc/board.d/02_network
index 28e42dcaf8..28dc405c8a 100755
--- a/target/linux/ipq806x/base-files/etc/board.d/02_network
+++ b/target/linux/ipq806x/base-files/etc/board.d/02_network
@@ -13,7 +13,6 @@ board=$(board_name)
 
 case "$board" in
 ap148 |\
-c2600 |\
 d7800 |\
 r7500 |\
 r7500v2 |\
@@ -22,6 +21,10 @@ vr2600v)
 	ucidef_add_switch "switch0" \
 		"1:lan" "2:lan" "3:lan" "4:lan" "6 at eth1" "5:wan" "0 at eth0"
 	;;
+c2600)
+	ucidef_add_switch "switch0" \
+		"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "6 at eth1" "5:wan" "0 at eth0"
+	;;
 db149)
 	ucidef_set_interface_lan "eth1 eth2 eth3"
 	ucidef_add_switch "switch0" \
-- 
2.14.1