[LEDE-DEV] [PATCH 00/13] sunxi: upgrade to kernel 4.9 and add A64 support

Lucian Cristian luci at createc.ro
Mon Aug 7 09:13:09 PDT 2017


On 07.08.2017 18:55, Hauke Mehrtens wrote:
>
> On 08/06/2017 08:16 PM, Lucian Cristian wrote:
>> On 04.08.2017 00:37, Hauke Mehrtens wrote:
>>> This upgrades the target to kernel 4.9 and also adds support for the
>>> Allwinner A64 SoC. This was only tested on the pine64+ and I do not own
>>> any older Allwinner SoC.
>>>
>>> Could someone please test this on an older 32 bit Allwinner SoC and
>>> report back some results.
>>>
>>> Hauke Mehrtens (13):
>>>     kernel: add some config options
>>>     sunix: add support for kernel 4.9
>>>     include: u-boot.mk: remove LEDE HOSTCPPFLAGS from u-boot HOSTCPPFLAGS
>>>     uboot-sunxi: update to version 2017.07
>>>     uboot-sunxi: do not depend on dtc being install on host
>>>     uboot-sunxi: revert the usage of binman
>>>     sunxi: fix build of rtc package when module not available
>>>     sunxi: split into cortex A8 and A7 subtarget
>>>     arm-trusted-firmware-sunxi: add new package
>>>     uboot-sunxi: build A64 SoC and pine64 U-Boot
>>>     sunxi: Backport patches needed for A64
>>>     sunxi: Backport patches from kernel 4.11 for A64
>>>     sunxi: Add A64 support with cortex53 subtarget
>>>
>>> ...
>> On LIME2 I get the attached boot log
>>
>>
>> Regards
> Hi Lucian,
>
> Thanks you for testing. Could you send me your patch you applied to add
> LIME2 please.
>
> It looks like executing the init binary failed, could you try to only
> apply my patches till "sunxi: fix build of rtc package when module not
> available" please, I assume the subtarget split is somehow not working.
>
> Hauke

I just added to the image/cortex-a7.mk, and no more dts patching like on 4.4

define Device/sun7i-a20-olinuxino-lime2
   DEVICE_TITLE:=Olimex A20-OLinuXino-LIME2
   DEVICE_PACKAGES:=kmod-ata-core kmod-ata-sunxi kmod-rtc-sunxi kmod-usb-hid
   SUPPORTED_DEVICES:=olimex,a20-olinuxino-lime2
   SUNXI_DTS:=sun7i-a20-olinuxino-lime2
endef

TARGET_DEVICES += sun7i-a20-olinuxino-lime2


and for uboot patch from here

https://github.com/lucize/source/commit/325304c62dd8f6ef1b82b94873397c31226a6f88#diff-1ab1035312dfd60272886d810ef44e7f

I actually own an eMMC version, tried that too, but is the same, for 
eMMC uboot needs this

https://github.com/armbian/build/blob/master/patch/u-boot/u-boot-sunxi/add-lime2-emmc.patch

I'll try without the split

Regards




More information about the Lede-dev mailing list