[LEDE-DEV] [PATCH 12/13] sunxi: Backport patches from kernel 4.11 for A64

Hauke Mehrtens hauke at hauke-m.de
Thu Aug 3 14:37:58 PDT 2017


This backports some more patches from kernel 4.11 adding more devices
to the device tree of the A64 SoC.

Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
---
 ...llwinner-add-USB1-related-nodes-of-Allwin.patch | 84 ++++++++++++++++++++++
 ...llwinner-sort-the-nodes-in-sun50i-a64-pin.patch | 40 +++++++++++
 ...llwinner-enable-EHCI1-OHCI1-and-USB-PHY-n.patch | 47 ++++++++++++
 ...4-dts-add-MUSB-node-to-Allwinner-A64-dtsi.patch | 42 +++++++++++
 ...nable-the-MUSB-controller-of-Pine64-in-ho.patch | 32 +++++++++
 ...llwinner-Remove-no-longer-used-pinctrl-su.patch | 31 ++++++++
 .../0019-arm64-allwinner-a64-Add-MMC-nodes.patch   | 69 ++++++++++++++++++
 ...arm64-allwinner-a64-Add-MMC-pinctrl-nodes.patch | 50 +++++++++++++
 ...22-arm64-allwinner-pine64-add-MMC-support.patch | 62 ++++++++++++++++
 ...3-arm64-allwinner-a64-add-UART1-pin-nodes.patch | 35 +++++++++
 .../0024-arm64-allwinner-a64-add-r_ccu-node.patch  | 52 ++++++++++++++
 ...rm64-allwinner-a64-add-R_PIO-pinctrl-node.patch | 35 +++++++++
 ...4-allwinner-a64-add-pmu0-regs-for-USB-PHY.patch | 29 ++++++++
 ...nner-a64-Add-PLL_PERIPH0-clock-to-the-R_C.patch | 32 +++++++++
 14 files changed, 640 insertions(+)
 create mode 100644 target/linux/sunxi/patches-4.9/0013-arm64-dts-allwinner-add-USB1-related-nodes-of-Allwin.patch
 create mode 100644 target/linux/sunxi/patches-4.9/0014-arm64-dts-allwinner-sort-the-nodes-in-sun50i-a64-pin.patch
 create mode 100644 target/linux/sunxi/patches-4.9/0015-arm64-dts-allwinner-enable-EHCI1-OHCI1-and-USB-PHY-n.patch
 create mode 100644 target/linux/sunxi/patches-4.9/0016-arm64-dts-add-MUSB-node-to-Allwinner-A64-dtsi.patch
 create mode 100644 target/linux/sunxi/patches-4.9/0017-arm64-dts-enable-the-MUSB-controller-of-Pine64-in-ho.patch
 create mode 100644 target/linux/sunxi/patches-4.9/0018-arm64-dts-allwinner-Remove-no-longer-used-pinctrl-su.patch
 create mode 100644 target/linux/sunxi/patches-4.9/0019-arm64-allwinner-a64-Add-MMC-nodes.patch
 create mode 100644 target/linux/sunxi/patches-4.9/0020-arm64-allwinner-a64-Add-MMC-pinctrl-nodes.patch
 create mode 100644 target/linux/sunxi/patches-4.9/0022-arm64-allwinner-pine64-add-MMC-support.patch
 create mode 100644 target/linux/sunxi/patches-4.9/0023-arm64-allwinner-a64-add-UART1-pin-nodes.patch
 create mode 100644 target/linux/sunxi/patches-4.9/0024-arm64-allwinner-a64-add-r_ccu-node.patch
 create mode 100644 target/linux/sunxi/patches-4.9/0025-arm64-allwinner-a64-add-R_PIO-pinctrl-node.patch
 create mode 100644 target/linux/sunxi/patches-4.9/0026-arm64-allwinner-a64-add-pmu0-regs-for-USB-PHY.patch
 create mode 100644 target/linux/sunxi/patches-4.9/0027-arm64-allwinner-a64-Add-PLL_PERIPH0-clock-to-the-R_C.patch

diff --git a/target/linux/sunxi/patches-4.9/0013-arm64-dts-allwinner-add-USB1-related-nodes-of-Allwin.patch b/target/linux/sunxi/patches-4.9/0013-arm64-dts-allwinner-add-USB1-related-nodes-of-Allwin.patch
new file mode 100644
index 0000000000..f96570c858
--- /dev/null
+++ b/target/linux/sunxi/patches-4.9/0013-arm64-dts-allwinner-add-USB1-related-nodes-of-Allwin.patch
@@ -0,0 +1,84 @@
+From a004ee350177ece3c059831ea49293d62aea7ca6 Mon Sep 17 00:00:00 2001
+From: Icenowy Zheng <icenowy at aosc.xyz>
+Date: Tue, 22 Nov 2016 23:58:29 +0800
+Subject: arm64: dts: allwinner: add USB1-related nodes of Allwinner A64
+
+Allwinner A64 have two HCI USB controllers, a OTG controller and a USB
+PHY device which have two ports. One of the port is wired to both a HCI
+USB controller and the OTG controller, which is currently not supported.
+The another one is only wired to a HCI controller, and the device node of
+OHCI/EHCI controller of the port can be added now.
+
+Also the A64 USB PHY device node is also added for the HCI controllers to
+work.
+
+Signed-off-by: Icenowy Zheng <icenowy at aosc.xyz>
+Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
+---
+ arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 46 +++++++++++++++++++++++++++
+ 1 file changed, 46 insertions(+)
+
+--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+@@ -42,8 +42,10 @@
+  *     OTHER DEALINGS IN THE SOFTWARE.
+  */
+ 
++#include <dt-bindings/clock/sun50i-a64-ccu.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/pinctrl/sun4i-a10.h>
++#include <dt-bindings/reset/sun50i-a64-ccu.h>
+ 
+ / {
+ 	interrupt-parent = <&gic>;
+@@ -120,6 +122,50 @@
+ 		#size-cells = <1>;
+ 		ranges;
+ 
++		usbphy: phy at 01c19400 {
++			compatible = "allwinner,sun50i-a64-usb-phy";
++			reg = <0x01c19400 0x14>,
++			      <0x01c1b800 0x4>;
++			reg-names = "phy_ctrl",
++				    "pmu1";
++			clocks = <&ccu CLK_USB_PHY0>,
++				 <&ccu CLK_USB_PHY1>;
++			clock-names = "usb0_phy",
++				      "usb1_phy";
++			resets = <&ccu RST_USB_PHY0>,
++				 <&ccu RST_USB_PHY1>;
++			reset-names = "usb0_reset",
++				      "usb1_reset";
++			status = "disabled";
++			#phy-cells = <1>;
++		};
++
++		ehci1: usb at 01c1b000 {
++			compatible = "allwinner,sun50i-a64-ehci", "generic-ehci";
++			reg = <0x01c1b000 0x100>;
++			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
++			clocks = <&ccu CLK_BUS_OHCI1>,
++				 <&ccu CLK_BUS_EHCI1>,
++				 <&ccu CLK_USB_OHCI1>;
++			resets = <&ccu RST_BUS_OHCI1>,
++				 <&ccu RST_BUS_EHCI1>;
++			phys = <&usbphy 1>;
++			phy-names = "usb";
++			status = "disabled";
++		};
++
++		ohci1: usb at 01c1b400 {
++			compatible = "allwinner,sun50i-a64-ohci", "generic-ohci";
++			reg = <0x01c1b400 0x100>;
++			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
++			clocks = <&ccu CLK_BUS_OHCI1>,
++				 <&ccu CLK_USB_OHCI1>;
++			resets = <&ccu RST_BUS_OHCI1>;
++			phys = <&usbphy 1>;
++			phy-names = "usb";
++			status = "disabled";
++		};
++
+ 		ccu: clock at 01c20000 {
+ 			compatible = "allwinner,sun50i-a64-ccu";
+ 			reg = <0x01c20000 0x400>;
diff --git a/target/linux/sunxi/patches-4.9/0014-arm64-dts-allwinner-sort-the-nodes-in-sun50i-a64-pin.patch b/target/linux/sunxi/patches-4.9/0014-arm64-dts-allwinner-sort-the-nodes-in-sun50i-a64-pin.patch
new file mode 100644
index 0000000000..4c7d6dafe2
--- /dev/null
+++ b/target/linux/sunxi/patches-4.9/0014-arm64-dts-allwinner-sort-the-nodes-in-sun50i-a64-pin.patch
@@ -0,0 +1,40 @@
+From ac93c09cdbaf1229c21f67a5db1c3c6df7d503e5 Mon Sep 17 00:00:00 2001
+From: Icenowy Zheng <icenowy at aosc.xyz>
+Date: Tue, 22 Nov 2016 23:58:30 +0800
+Subject: arm64: dts: allwinner: sort the nodes in sun50i-a64-pine64.dts
+
+In this dts file, uart0 node is put before i2c1.
+
+Move the uart0 node to the end to satisfy alphebetical order.
+
+Signed-off-by: Icenowy Zheng <icenowy at aosc.xyz>
+Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
+---
+ arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 12 ++++++------
+ 1 file changed, 6 insertions(+), 6 deletions(-)
+
+--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
+@@ -57,12 +57,6 @@
+ 	};
+ };
+ 
+-&uart0 {
+-	pinctrl-names = "default";
+-	pinctrl-0 = <&uart0_pins_a>;
+-	status = "okay";
+-};
+-
+ &i2c1 {
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&i2c1_pins>;
+@@ -72,3 +66,9 @@
+ &i2c1_pins {
+ 	bias-pull-up;
+ };
++
++&uart0 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&uart0_pins_a>;
++	status = "okay";
++};
diff --git a/target/linux/sunxi/patches-4.9/0015-arm64-dts-allwinner-enable-EHCI1-OHCI1-and-USB-PHY-n.patch b/target/linux/sunxi/patches-4.9/0015-arm64-dts-allwinner-enable-EHCI1-OHCI1-and-USB-PHY-n.patch
new file mode 100644
index 0000000000..451ec595c9
--- /dev/null
+++ b/target/linux/sunxi/patches-4.9/0015-arm64-dts-allwinner-enable-EHCI1-OHCI1-and-USB-PHY-n.patch
@@ -0,0 +1,47 @@
+From d49f9dbc8f0c4521fa56477d051a3bd1158f2595 Mon Sep 17 00:00:00 2001
+From: Icenowy Zheng <icenowy at aosc.xyz>
+Date: Tue, 22 Nov 2016 23:58:31 +0800
+Subject: arm64: dts: allwinner: enable EHCI1, OHCI1 and USB PHY nodes in
+ Pine64
+
+Pine64 have two USB Type-A ports, which are wired to the two ports of
+A64 USB PHY, and the lower port is the EHCI/OHCI1 port.
+
+Enable the necessary nodes to enable the lower USB port to work.
+
+Signed-off-by: Icenowy Zheng <icenowy at aosc.xyz>
+Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
+---
+ arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 12 ++++++++++++
+ 1 file changed, 12 insertions(+)
+
+--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
+@@ -57,6 +57,10 @@
+ 	};
+ };
+ 
++&ehci1 {
++	status = "okay";
++};
++
+ &i2c1 {
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&i2c1_pins>;
+@@ -67,8 +71,16 @@
+ 	bias-pull-up;
+ };
+ 
++&ohci1 {
++	status = "okay";
++};
++
+ &uart0 {
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&uart0_pins_a>;
+ 	status = "okay";
+ };
++
++&usbphy {
++	status = "okay";
++};
diff --git a/target/linux/sunxi/patches-4.9/0016-arm64-dts-add-MUSB-node-to-Allwinner-A64-dtsi.patch b/target/linux/sunxi/patches-4.9/0016-arm64-dts-add-MUSB-node-to-Allwinner-A64-dtsi.patch
new file mode 100644
index 0000000000..804d00521b
--- /dev/null
+++ b/target/linux/sunxi/patches-4.9/0016-arm64-dts-add-MUSB-node-to-Allwinner-A64-dtsi.patch
@@ -0,0 +1,42 @@
+From 972a3ecdf27f3ebdd1ce0dccd1b548ef3c04b8ed Mon Sep 17 00:00:00 2001
+From: Icenowy Zheng <icenowy at aosc.xyz>
+Date: Wed, 23 Nov 2016 00:59:01 +0800
+Subject: arm64: dts: add MUSB node to Allwinner A64 dtsi
+
+Allwinner A64 SoC has a MUSB controller like the one in A33, so add
+a node for it, just use the compatible of A33 MUSB.
+
+Host mode is tested to work properly on Pine64 and will be added into
+the device tree of Pine64 in next patch.
+
+Peripheral mode is also tested on Pine64, by changing dr_mode property
+of usb_otg node and use a non-standard USB Type-A to Type-A cable.
+
+Signed-off-by: Icenowy Zheng <icenowy at aosc.xyz>
+Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
+---
+ arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 13 +++++++++++++
+ 1 file changed, 13 insertions(+)
+
+--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+@@ -122,6 +122,19 @@
+ 		#size-cells = <1>;
+ 		ranges;
+ 
++		usb_otg: usb at 01c19000 {
++			compatible = "allwinner,sun8i-a33-musb";
++			reg = <0x01c19000 0x0400>;
++			clocks = <&ccu CLK_BUS_OTG>;
++			resets = <&ccu RST_BUS_OTG>;
++			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
++			interrupt-names = "mc";
++			phys = <&usbphy 0>;
++			phy-names = "usb";
++			extcon = <&usbphy 0>;
++			status = "disabled";
++		};
++
+ 		usbphy: phy at 01c19400 {
+ 			compatible = "allwinner,sun50i-a64-usb-phy";
+ 			reg = <0x01c19400 0x14>,
diff --git a/target/linux/sunxi/patches-4.9/0017-arm64-dts-enable-the-MUSB-controller-of-Pine64-in-ho.patch b/target/linux/sunxi/patches-4.9/0017-arm64-dts-enable-the-MUSB-controller-of-Pine64-in-ho.patch
new file mode 100644
index 0000000000..3992ab6510
--- /dev/null
+++ b/target/linux/sunxi/patches-4.9/0017-arm64-dts-enable-the-MUSB-controller-of-Pine64-in-ho.patch
@@ -0,0 +1,32 @@
+From f57e8384c5d2417fd8707c577d8e622fc1570b6c Mon Sep 17 00:00:00 2001
+From: Icenowy Zheng <icenowy at aosc.xyz>
+Date: Wed, 23 Nov 2016 00:59:02 +0800
+Subject: arm64: dts: enable the MUSB controller of Pine64 in host-only mode
+
+A64 has a MUSB controller wired to the USB PHY 0, which is connected
+to the upper USB Type-A port of Pine64.
+
+As the port is a Type-A female port, enable it in host-only mode in the
+device tree, which makes devices with USB Type-A male port can work on
+this port (which is originally designed by Pine64 team).
+
+Signed-off-by: Icenowy Zheng <icenowy at aosc.xyz>
+Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
+---
+ arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 5 +++++
+ 1 file changed, 5 insertions(+)
+
+--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
+@@ -81,6 +81,11 @@
+ 	status = "okay";
+ };
+ 
++&usb_otg {
++	dr_mode = "host";
++	status = "okay";
++};
++
+ &usbphy {
+ 	status = "okay";
+ };
diff --git a/target/linux/sunxi/patches-4.9/0018-arm64-dts-allwinner-Remove-no-longer-used-pinctrl-su.patch b/target/linux/sunxi/patches-4.9/0018-arm64-dts-allwinner-Remove-no-longer-used-pinctrl-su.patch
new file mode 100644
index 0000000000..d2d54e937f
--- /dev/null
+++ b/target/linux/sunxi/patches-4.9/0018-arm64-dts-allwinner-Remove-no-longer-used-pinctrl-su.patch
@@ -0,0 +1,31 @@
+From 4f9758302ccaf753cd4ba6a5eb740392a4d24773 Mon Sep 17 00:00:00 2001
+From: Chen-Yu Tsai <wens at csie.org>
+Date: Tue, 24 Jan 2017 10:32:29 +0800
+Subject: arm64: dts: allwinner: Remove no longer used pinctrl/sun4i-a10.h
+ header
+
+All dts files for the sunxi platform have been switched to the generic
+pinconf bindings. As a result, the sunxi specific pinctrl macros are
+no longer used.
+
+Remove the #include entry with the following command:
+
+    sed -i -e '/pinctrl\/sun4i-a10.h/D' \
+	arch/arm64/boot/dts/allwinner/*.dts?
+
+Signed-off-by: Chen-Yu Tsai <wens at csie.org>
+Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
+---
+ arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 1 -
+ 1 file changed, 1 deletion(-)
+
+--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+@@ -44,7 +44,6 @@
+ 
+ #include <dt-bindings/clock/sun50i-a64-ccu.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+-#include <dt-bindings/pinctrl/sun4i-a10.h>
+ #include <dt-bindings/reset/sun50i-a64-ccu.h>
+ 
+ / {
diff --git a/target/linux/sunxi/patches-4.9/0019-arm64-allwinner-a64-Add-MMC-nodes.patch b/target/linux/sunxi/patches-4.9/0019-arm64-allwinner-a64-Add-MMC-nodes.patch
new file mode 100644
index 0000000000..1f91e9bead
--- /dev/null
+++ b/target/linux/sunxi/patches-4.9/0019-arm64-allwinner-a64-Add-MMC-nodes.patch
@@ -0,0 +1,69 @@
+From f3dff3478a8a7b09f9a92023955a151584658893 Mon Sep 17 00:00:00 2001
+From: Andre Przywara <andre.przywara at arm.com>
+Date: Thu, 6 Oct 2016 02:25:22 +0100
+Subject: arm64: allwinner: a64: Add MMC nodes
+
+The A64 has 3 MMC controllers, one of them being especially targeted to
+eMMC. Among other things, it has a data strobe signal and a 8 bits data
+width.
+
+The two other are more usual controllers that will have a 4 bits width at
+most and no data strobe signal, which limits it to more usual SD or MMC
+peripherals.
+
+Signed-off-by: Andre Przywara <andre.przywara at arm.com>
+Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
+Tested-by: Florian Vaussard <florian.vaussard at heig-vd.ch>
+Acked-by: Chen-Yu Tsai <wens at csie.org>
+---
+ arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 39 +++++++++++++++++++++++++++
+ 1 file changed, 39 insertions(+)
+
+--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+@@ -121,6 +121,45 @@
+ 		#size-cells = <1>;
+ 		ranges;
+ 
++		mmc0: mmc at 1c0f000 {
++			compatible = "allwinner,sun50i-a64-mmc";
++			reg = <0x01c0f000 0x1000>;
++			clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
++			clock-names = "ahb", "mmc";
++			resets = <&ccu RST_BUS_MMC0>;
++			reset-names = "ahb";
++			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
++			status = "disabled";
++			#address-cells = <1>;
++			#size-cells = <0>;
++		};
++
++		mmc1: mmc at 1c10000 {
++			compatible = "allwinner,sun50i-a64-mmc";
++			reg = <0x01c10000 0x1000>;
++			clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
++			clock-names = "ahb", "mmc";
++			resets = <&ccu RST_BUS_MMC1>;
++			reset-names = "ahb";
++			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
++			status = "disabled";
++			#address-cells = <1>;
++			#size-cells = <0>;
++		};
++
++		mmc2: mmc at 1c11000 {
++			compatible = "allwinner,sun50i-a64-emmc";
++			reg = <0x01c11000 0x1000>;
++			clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
++			clock-names = "ahb", "mmc";
++			resets = <&ccu RST_BUS_MMC2>;
++			reset-names = "ahb";
++			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
++			status = "disabled";
++			#address-cells = <1>;
++			#size-cells = <0>;
++		};
++
+ 		usb_otg: usb at 01c19000 {
+ 			compatible = "allwinner,sun8i-a33-musb";
+ 			reg = <0x01c19000 0x0400>;
diff --git a/target/linux/sunxi/patches-4.9/0020-arm64-allwinner-a64-Add-MMC-pinctrl-nodes.patch b/target/linux/sunxi/patches-4.9/0020-arm64-allwinner-a64-Add-MMC-pinctrl-nodes.patch
new file mode 100644
index 0000000000..f5af0f819a
--- /dev/null
+++ b/target/linux/sunxi/patches-4.9/0020-arm64-allwinner-a64-Add-MMC-pinctrl-nodes.patch
@@ -0,0 +1,50 @@
+From a3e8f4926248b3c12933aacec4432e9b6de004bb Mon Sep 17 00:00:00 2001
+From: Maxime Ripard <maxime.ripard at free-electrons.com>
+Date: Mon, 9 Jan 2017 16:39:15 +0100
+Subject: arm64: allwinner: a64: Add MMC pinctrl nodes
+
+The A64 only has a single set of pins for each MMC controller. Since we
+already have boards that require all of them, let's add them to the DTSI.
+
+Reviewed-by: Andre Przywara <andre.przywara at arm.com>
+Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
+Tested-by: Florian Vaussard <florian.vaussard at heig-vd.ch>
+Acked-by: Chen-Yu Tsai <wens at csie.org>
+---
+ arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 25 +++++++++++++++++++++++++
+ 1 file changed, 25 insertions(+)
+
+--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+@@ -243,6 +243,31 @@
+ 				function = "i2c1";
+ 			};
+ 
++			mmc0_pins: mmc0-pins {
++				pins = "PF0", "PF1", "PF2", "PF3",
++				       "PF4", "PF5";
++				function = "mmc0";
++				drive-strength = <30>;
++				bias-pull-up;
++			};
++
++			mmc1_pins: mmc1-pins {
++				pins = "PG0", "PG1", "PG2", "PG3",
++				       "PG4", "PG5";
++				function = "mmc1";
++				drive-strength = <30>;
++				bias-pull-up;
++			};
++
++			mmc2_pins: mmc2-pins {
++				pins = "PC1", "PC5", "PC6", "PC8", "PC9",
++				       "PC10","PC11", "PC12", "PC13",
++				       "PC14", "PC15", "PC16";
++				function = "mmc2";
++				drive-strength = <30>;
++				bias-pull-up;
++			};
++
+ 			uart0_pins_a: uart0 at 0 {
+ 				pins = "PB8", "PB9";
+ 				function = "uart0";
diff --git a/target/linux/sunxi/patches-4.9/0022-arm64-allwinner-pine64-add-MMC-support.patch b/target/linux/sunxi/patches-4.9/0022-arm64-allwinner-pine64-add-MMC-support.patch
new file mode 100644
index 0000000000..c60e5104cf
--- /dev/null
+++ b/target/linux/sunxi/patches-4.9/0022-arm64-allwinner-pine64-add-MMC-support.patch
@@ -0,0 +1,62 @@
+From ebe3ae29c6314217edf40d9ee23c36d610ff0fb8 Mon Sep 17 00:00:00 2001
+From: Andre Przywara <andre.przywara at arm.com>
+Date: Tue, 10 Jan 2017 01:22:31 +0000
+Subject: arm64: allwinner: pine64: add MMC support
+
+All Pine64 boards connect an micro-SD card slot to the first MMC
+controller.
+Enable the respective DT node and specify the (always-on) regulator
+and card-detect pin.
+As a micro-SD slot does not feature a write-protect switch, we disable
+this feature.
+
+Signed-off-by: Andre Przywara <andre.przywara at arm.com>
+Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
+Acked-by: Chen-Yu Tsai <wens at csie.org>
+---
+ arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 20 ++++++++++++++++++++
+ 1 file changed, 20 insertions(+)
+
+--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
+@@ -44,6 +44,8 @@
+ 
+ #include "sun50i-a64.dtsi"
+ 
++#include <dt-bindings/gpio/gpio.h>
++
+ / {
+ 	model = "Pine64";
+ 	compatible = "pine64,pine64", "allwinner,sun50i-a64";
+@@ -55,6 +57,13 @@
+ 	chosen {
+ 		stdout-path = "serial0:115200n8";
+ 	};
++
++	reg_vcc3v3: vcc3v3 {
++		compatible = "regulator-fixed";
++		regulator-name = "vcc3v3";
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++	};
+ };
+ 
+ &ehci1 {
+@@ -71,6 +80,17 @@
+ 	bias-pull-up;
+ };
+ 
++&mmc0 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&mmc0_pins>;
++	vmmc-supply = <&reg_vcc3v3>;
++	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
++	cd-inverted;
++	disable-wp;
++	bus-width = <4>;
++	status = "okay";
++};
++
+ &ohci1 {
+ 	status = "okay";
+ };
diff --git a/target/linux/sunxi/patches-4.9/0023-arm64-allwinner-a64-add-UART1-pin-nodes.patch b/target/linux/sunxi/patches-4.9/0023-arm64-allwinner-a64-add-UART1-pin-nodes.patch
new file mode 100644
index 0000000000..998d51435f
--- /dev/null
+++ b/target/linux/sunxi/patches-4.9/0023-arm64-allwinner-a64-add-UART1-pin-nodes.patch
@@ -0,0 +1,35 @@
+From e7ba733d32cc9487b62b07219ad911c77764a681 Mon Sep 17 00:00:00 2001
+From: Andre Przywara <andre.przywara at arm.com>
+Date: Tue, 10 Jan 2017 01:22:32 +0000
+Subject: arm64: allwinner: a64: add UART1 pin nodes
+
+On many boards UART1 connects to a Bluetooth chip, so add the pinctrl
+nodes for the only pins providing access to that UART. That includes
+those pins for hardware flow control (RTS/CTS).
+
+Signed-off-by: Andre Przywara <andre.przywara at arm.com>
+Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
+Acked-by: Chen-Yu Tsai <wens at csie.org>
+---
+ arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 10 ++++++++++
+ 1 file changed, 10 insertions(+)
+
+--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+@@ -272,6 +272,16 @@
+ 				pins = "PB8", "PB9";
+ 				function = "uart0";
+ 			};
++
++			uart1_pins: uart1_pins {
++				pins = "PG6", "PG7";
++				function = "uart1";
++			};
++
++			uart1_rts_cts_pins: uart1_rts_cts_pins {
++				pins = "PG8", "PG9";
++				function = "uart1";
++			};
+ 		};
+ 
+ 		uart0: serial at 1c28000 {
diff --git a/target/linux/sunxi/patches-4.9/0024-arm64-allwinner-a64-add-r_ccu-node.patch b/target/linux/sunxi/patches-4.9/0024-arm64-allwinner-a64-add-r_ccu-node.patch
new file mode 100644
index 0000000000..19a3589708
--- /dev/null
+++ b/target/linux/sunxi/patches-4.9/0024-arm64-allwinner-a64-add-r_ccu-node.patch
@@ -0,0 +1,52 @@
+From 791a9e001d3ba3b552888b0bf3c592a50b71f57e Mon Sep 17 00:00:00 2001
+From: Icenowy Zheng <icenowy at aosc.xyz>
+Date: Tue, 4 Apr 2017 17:50:58 +0800
+Subject: arm64: allwinner: a64: add r_ccu node
+
+A64 SoC have a CCU (r_ccu) in PRCM block.
+
+Add the device node for it.
+
+The mux 3 of R_CCU is an internal oscillator, which is 16MHz according
+to the user manual, and has only 30% accuracy based on our experience
+on older SoCs. The real mesaured value of it on two Pine64 boards is
+around 11MHz, which is around 70% of 16MHz.
+
+Signed-off-by: Icenowy Zheng <icenowy at aosc.xyz>
+Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
+---
+ arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 17 +++++++++++++++++
+ 1 file changed, 17 insertions(+)
+
+--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+@@ -98,6 +98,14 @@
+ 		clock-output-names = "osc32k";
+ 	};
+ 
++	iosc: internal-osc-clk {
++		#clock-cells = <0>;
++		compatible = "fixed-clock";
++		clock-frequency = <16000000>;
++		clock-accuracy = <300000000>;
++		clock-output-names = "iosc";
++	};
++
+ 	psci {
+ 		compatible = "arm,psci-0.2";
+ 		method = "smc";
+@@ -389,5 +397,14 @@
+ 			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ 				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ 		};
++
++		r_ccu: clock at 1f01400 {
++			compatible = "allwinner,sun50i-a64-r-ccu";
++			reg = <0x01f01400 0x100>;
++			clocks = <&osc24M>, <&osc32k>, <&iosc>;
++			clock-names = "hosc", "losc", "iosc";
++			#clock-cells = <1>;
++			#reset-cells = <1>;
++		};
+ 	};
+ };
diff --git a/target/linux/sunxi/patches-4.9/0025-arm64-allwinner-a64-add-R_PIO-pinctrl-node.patch b/target/linux/sunxi/patches-4.9/0025-arm64-allwinner-a64-add-R_PIO-pinctrl-node.patch
new file mode 100644
index 0000000000..ff541ce63e
--- /dev/null
+++ b/target/linux/sunxi/patches-4.9/0025-arm64-allwinner-a64-add-R_PIO-pinctrl-node.patch
@@ -0,0 +1,35 @@
+From ec4279053a6434f685246e022be95d2a62f8c608 Mon Sep 17 00:00:00 2001
+From: Icenowy Zheng <icenowy at aosc.xyz>
+Date: Tue, 4 Apr 2017 17:51:00 +0800
+Subject: arm64: allwinner: a64: add R_PIO pinctrl node
+
+Allwinner A64 have a dedicated pin controller to manage the PL pin bank.
+As the driver and the required clock support are added, add the device
+node for it.
+
+Signed-off-by: Icenowy Zheng <icenowy at aosc.xyz>
+Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
+---
+ arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 12 ++++++++++++
+ 1 file changed, 12 insertions(+)
+
+--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+@@ -406,5 +406,17 @@
+ 			#clock-cells = <1>;
+ 			#reset-cells = <1>;
+ 		};
++
++		r_pio: pinctrl at 01f02c00 {
++			compatible = "allwinner,sun50i-a64-r-pinctrl";
++			reg = <0x01f02c00 0x400>;
++			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
++			clocks = <&r_ccu 3>, <&osc24M>, <&osc32k>;
++			clock-names = "apb", "hosc", "losc";
++			gpio-controller;
++			#gpio-cells = <3>;
++			interrupt-controller;
++			#interrupt-cells = <3>;
++		};
+ 	};
+ };
diff --git a/target/linux/sunxi/patches-4.9/0026-arm64-allwinner-a64-add-pmu0-regs-for-USB-PHY.patch b/target/linux/sunxi/patches-4.9/0026-arm64-allwinner-a64-add-pmu0-regs-for-USB-PHY.patch
new file mode 100644
index 0000000000..0d7803775e
--- /dev/null
+++ b/target/linux/sunxi/patches-4.9/0026-arm64-allwinner-a64-add-pmu0-regs-for-USB-PHY.patch
@@ -0,0 +1,29 @@
+From 0d98479738b950e30bb4f782d60099d44076ad67 Mon Sep 17 00:00:00 2001
+From: Icenowy Zheng <icenowy at aosc.io>
+Date: Wed, 5 Apr 2017 22:30:34 +0800
+Subject: arm64: allwinner: a64: add pmu0 regs for USB PHY
+
+The USB PHY in A64 has a "pmu0" region, which controls the EHCI/OHCI
+controller pair that can be connected to the PHY0.
+
+Add the MMIO region for PHY node.
+
+Signed-off-by: Icenowy Zheng <icenowy at aosc.io>
+Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
+---
+ arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+@@ -184,8 +184,10 @@
+ 		usbphy: phy at 01c19400 {
+ 			compatible = "allwinner,sun50i-a64-usb-phy";
+ 			reg = <0x01c19400 0x14>,
++			      <0x01c1a800 0x4>,
+ 			      <0x01c1b800 0x4>;
+ 			reg-names = "phy_ctrl",
++				    "pmu0",
+ 				    "pmu1";
+ 			clocks = <&ccu CLK_USB_PHY0>,
+ 				 <&ccu CLK_USB_PHY1>;
diff --git a/target/linux/sunxi/patches-4.9/0027-arm64-allwinner-a64-Add-PLL_PERIPH0-clock-to-the-R_C.patch b/target/linux/sunxi/patches-4.9/0027-arm64-allwinner-a64-Add-PLL_PERIPH0-clock-to-the-R_C.patch
new file mode 100644
index 0000000000..319dba6591
--- /dev/null
+++ b/target/linux/sunxi/patches-4.9/0027-arm64-allwinner-a64-Add-PLL_PERIPH0-clock-to-the-R_C.patch
@@ -0,0 +1,32 @@
+From f74994a94063bc85ac1d6ad677ed06b5279c101f Mon Sep 17 00:00:00 2001
+From: Chen-Yu Tsai <wens at csie.org>
+Date: Wed, 31 May 2017 15:58:24 +0800
+Subject: arm64: allwinner: a64: Add PLL_PERIPH0 clock to the R_CCU
+
+The AR100 clock within the R_CCU (PRCM) has the PLL_PERIPH0 as one of
+its parents.
+
+This adds the reference in the device tree describing this relationship.
+This patch uses a raw number for the clock index to ease merging by
+avoiding cross tree dependencies.
+
+Signed-off-by: Chen-Yu Tsai <wens at csie.org>
+Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
+---
+ arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 5 +++--
+ 1 file changed, 3 insertions(+), 2 deletions(-)
+
+--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+@@ -403,8 +403,9 @@
+ 		r_ccu: clock at 1f01400 {
+ 			compatible = "allwinner,sun50i-a64-r-ccu";
+ 			reg = <0x01f01400 0x100>;
+-			clocks = <&osc24M>, <&osc32k>, <&iosc>;
+-			clock-names = "hosc", "losc", "iosc";
++			clocks = <&osc24M>, <&osc32k>, <&iosc>,
++				 <&ccu 11>;
++			clock-names = "hosc", "losc", "iosc", "pll-periph";
+ 			#clock-cells = <1>;
+ 			#reset-cells = <1>;
+ 		};
-- 
2.11.0




More information about the Lede-dev mailing list