[LEDE-DEV] MT7621 support Jumbo frames

[Milan Kočvara]

Hello all,
if someone do a testing patch for jumboFrames, I can lend a helping
hand with testing on EdgeRouter X. I think MT7621 know JumboFrames,
because of Ubiquiti FMW allow to set MTU 1536B

2017-04-10 2:06 GMT+02:00  <rosenp at gmail.com>:
> Probably was not in the interest of the driver writers. Based on the
> copyrights though, it's mostly LEDE/OpenWRT developers. Try modifying
> the code to test if jumbo frames work.
>
> On Sun, 2017-04-09 at 21:20 +0200, Jaap Buurman wrote:
>> Hello all,
>>
>> I found the message below in a conversation from back in August, 2016
>> in this mailinglist. I did not find a reply to this question. Has
>> there ever been one? Or does anyone else happen to know the answer to
>> this question? Thank you very much in advance.
>>
>> Yours sincerely,
>>
>> Jaap Buurman
>>
>> August, 2016 message:
>>
>>
>> Hi all,
>>
>> in the MT7621 ethernet driver code
>> (drivers/net/ethernet/mediatek/soc_mt7621.c) the FE_FLAG_JUMBO_FRAME
>> flag is not during the device initialization. This prevents the user
>> to set an MTU greater than 1500. Is this correct? Does MT7621 support
>> jumbo frames?
>>
>> Thanks.
>>
>
> _______________________________________________
> Lede-dev mailing list
> Lede-dev at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/lede-dev