[LEDE-DEV] lantiq: cannot access flash on Netgear DM200 while porting LEDE

[Baptiste Jonglez]

On Sun, Apr 02, 2017 at 06:16:10PM +0200, Hauke Mehrtens wrote:
> The Vendor SDK is based on UGW 6.1.1, based on OpenWrt 12.09 with kernel
> 3.10 and device tree support. Probably even the vendor image uses a
> device tree compiled into the kernel image.
> According to the configuration file in
> /DM200-V1.0.0.44_gpl_src/config/defconfig_dm200
> it would include this dts file:
> /DM200-V1.0.0.44_gpl_src/target/linux/lantiq/image/dts/EASY220.dts
> In this dts file the flash is connected to the SPI controller.

I had already looked hard at the GPL archive (it was useful to find how to
get ethernet working), but I didn't find the DTS.  Thanks a lot!

I will use this DTS to get the SPI-attached flash working, and then there
are still a few things to fix before submitting.

Baptiste
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/lede-dev/attachments/20170403/fa4b2409/attachment.sig>