[LEDE-DEV] Good or Bad - DSL Status ?
Dennis Schneck
dennisschneck at web.de
Mon Sep 26 10:41:29 PDT 2016
Hello,
is like to know if this good or bad:
DSL Status
DSL Status: UP
Line State: showtime_tc_sync [0x801]
Line Mode: G.993.2 (VDSL2)
Annex: A, B, C
Profile: 17a
Data Rate: 30.760 Mb/s / 5.120 Mb/s
Max. Attainable Data Rate (ATTNDR): 63.123 Mb/s / 33.090 Mb/s
Latency: 8.0 ms / 0.0 ms
Line Attenuation (LATN): 16 dB / 24.4 dB
Signal Attenuation (SATN): 17.9 dB / 23.7 dB
Noise Margin (SNR): 16.3 dB / 26.7 dB
Aggregate Transmit Power(ACTATP): 3.6 dB / 14 dB
Forward Error Correction Seconds (FECS): 51791949 / 0
Errored seconds (ES): 744 / 116
Severely Errored Seconds (SES): 0 / 6
Loss of Signal Seconds (LOSS): 0 / 0
Unavailable Seconds (UAS): 31 / 31
Header Error Code Errors (HEC): 0 / 0
Non Pre-emtive CRC errors (CRC_P): 538 / 0
Pre-emtive CRC errors (CRCP_P): 0 / 0
Line Uptime: 2d 2h 15m 5s
ATU-C System Vendor ID: Broadcom 164.96
Power Management Mode: L0 - Synchronized
Device: VGV7510KW22 - o2 Box 6431 with: LEDE r1640
Normal i should have 50MBit, but the Provider
did it not get working
so they slow down the speed to: 30MBit down
Thanks
Dennis
More information about the Lede-dev
mailing list