[LEDE-DEV] [PATCH v2 2/2] ar71xx: Do not use a hardcoded ath10k firmware mac address

[Martin Blumenstingl]

Hi Stijn,

On Sat, Sep 24, 2016 at 2:18 PM, Stijn Segers
<francesco.borromini at inventati.org> wrote:
> Hi Martin,
>
> I just tested your patch on LEDE r1648. I have two Unifis here. I
> inadvertently flashed one before checking its MAC addresses,
> but I did check the second one before and after. MAC before and after flash
> seems to remain identical though. All wired interfaces have the same
> address, wireless has xA and xB. MAC does differ between devices.
Thanks for testing - this confirms that the updated firmware is working fine!
Unfortunately it does not say anything about the changes to the ar71xx
initscript, as the changed code from
target/linux/ar71xx/base-files/lib/preinit/82_patch_ath10k is only
executed for dgl-5500-a1 and tew-823dru.