[LEDE-DEV] [RFC 7/7] ramips: set blocksize for dch-m225/dir-860l-b1

[Russell Senior]

> Signed-off-by: Mathias Kresin <dev at kresin.me>
> ---
>  target/linux/ramips/image/mt7620.mk | 6 ++++--
>  target/linux/ramips/image/mt7621.mk | 6 ++++--
>  2 files changed, 8 insertions(+), 4 deletions(-)
> 
> diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk
> index 00dd4f2..1df806b 100644
> --- a/target/linux/ramips/image/mt7620.mk
> +++ b/target/linux/ramips/image/mt7620.mk
> @@ -422,14 +422,16 @@ TARGET_DEVICES += tiny-ac
>  dch_m225_mtd_size=7012352
>  define Device/dch-m225
>    DTS := DCH-M225
> +  BLOCKSIZE := 4k
>    IMAGES += factory.bin
>    IMAGE_SIZE := $(dch_m225_mtd_size)
>    IMAGE/sysupgrade.bin := \
> -	append-kernel | pad-offset 65536 64 | append-rootfs | \
> +	append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-rootfs | \
>  	seama -m "dev=/dev/mtdblock/2" -m "type=firmware" | \
>  	pad-rootfs | check-size $$$$(IMAGE_SIZE)
>    IMAGE/factory.bin := \
> -	append-kernel | pad-offset 65536 64 | append-rootfs | pad-rootfs -x 64 | \
> +	append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | \
> +	append-rootfs | pad-rootfs -x 64 | \
>  	seama -m "dev=/dev/mtdblock/2" -m "type=firmware" | \
>  	seama-seal -m "signature=wapn22_dlink.2013gui_dap1320b" | \
>  	check-size $$$$(IMAGE_SIZE)
> diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
> index e602dfb..acc17c3 100644
> --- a/target/linux/ramips/image/mt7621.mk
> +++ b/target/linux/ramips/image/mt7621.mk
> @@ -65,15 +65,17 @@ TARGET_DEVICES += wsr-1166
>  
>  define Device/dir-860l-b1
>    DTS := DIR-860L-B1
> +  BLOCKSIZE := 4k
>    IMAGES += factory.bin
>    KERNEL := kernel-bin | patch-dtb | relocate-kernel | lzma | uImage lzma
>    IMAGE_SIZE := $(ralink_default_fw_size_16M)
>    IMAGE/sysupgrade.bin := \
> -	append-kernel | pad-offset 65536 64 | append-rootfs | \
> +	append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-rootfs | \
>  	seama -m "dev=/dev/mtdblock/2" -m "type=firmware" | \
>  	pad-rootfs | check-size $$$$(IMAGE_SIZE)
>    IMAGE/factory.bin := \
> -	append-kernel | pad-offset 65536 64 | append-rootfs | pad-rootfs -x 64 | \
> +	append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | \
> +	append-rootfs | pad-rootfs -x 64 | \
>  	seama -m "dev=/dev/mtdblock/2" -m "type=firmware" | \
>  	seama-seal -m "signature=wrgac13_dlink.2013gui_dir860lb" | \
>  	check-size $$$$(IMAGE_SIZE)
> -- 
> 2.7.4

This patch broke dir-860l-b1.  Changing BLOCKSIZE for dir-860l-b1 to 64k makes it work again.


-- 
Russell Senior, President
russell at personaltelco.net