[LEDE-DEV] [PATCH 5/5] ar71xx: add support for D-Link DAP-2695 rev. A1

[Yousong Zhou]

On 12 September 2016 at 00:12, Stijn Tintel <stijn at linux-ipv6.be> wrote:
> Signed-off-by: Stijn Tintel <stijn at linux-ipv6.be>
> ---
>  package/boot/uboot-envtools/files/ar71xx           |   1 +
>  target/linux/ar71xx/base-files/etc/board.d/01_leds |   5 +
>  .../linux/ar71xx/base-files/etc/board.d/02_network |   5 +
>  .../etc/hotplug.d/firmware/11-ath10k-caldata       |   4 +
>  .../base-files/etc/uci-defaults/09_fix-checksum    |   9 +
>  target/linux/ar71xx/base-files/lib/ar71xx.sh       |   3 +
>  .../ar71xx/base-files/lib/upgrade/platform.sh      |  13 ++
>  target/linux/ar71xx/config-4.4                     |   1 +
>  .../ar71xx/files/arch/mips/ath79/Kconfig.openwrt   |   9 +
>  target/linux/ar71xx/files/arch/mips/ath79/Makefile |   1 +
>  .../files/arch/mips/ath79/mach-dap-2695-a1.c       | 191 +++++++++++++++++++++
>  .../linux/ar71xx/files/arch/mips/ath79/machtypes.h |   1 +
>  target/linux/ar71xx/image/generic.mk               |  38 ++++
>  13 files changed, 281 insertions(+)
>  create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-dap-2695-a1.c

We have just got rid of the 09_fix-seama-header by excluding jffs2
marker from the calculation of checksum.  The result image flashes
just fine because it looks like the device will flash the whole
uploaded file instead of just the size in the image header.  If that
is also the case with fixwrgg then we can save a few flash block
erases.

                yousong