[LEDE-DEV] [PATCH v2 0/3] Add support for the TRENDnet TEW-827DRU (tew827dru)
J Mo
jmomo at jmomo.net
Fri Sep 9 18:35:43 PDT 2016
Second round patch set proposal to add support for the TRENDnet TEW-827DRU.
I think I fixed all of the issues previously noted.
its-maker.sh got a lot of fixes after testing and now supports configurations. It's nearly feature complete. I'm wrote a post over on the OpenWRT forum as documentation with examples et-cetera.
Note that patch 494-mtd-ubi-add-EOF-marker-support.patch currently prevents this device from booting. See LEDE bug FS#161. The patch either needs to get fixed or removed. This isn't a danger to end-users though, as there is a http/web UI recovery loader built into the u-boot image, accessible by holding down the reset button on boot. End-users can recover without opening the chassis to get console, should they install an image without this fix.
jmomo (3):
ipq806x: Add new script: scripts/its-maker.sh
ipq806x: Add support for new device: tew827dru
uboot-envtools: Add tew827dru support
include/image-commands.mk | 16 +
package/boot/uboot-envtools/files/ipq | 3 +
scripts/its-maker.sh | 828 +++++++++++++++++++++
.../linux/ipq806x/base-files/etc/board.d/01_leds | 6 +
.../ipq806x/base-files/etc/board.d/02_network | 4 +
target/linux/ipq806x/base-files/etc/diag.sh | 3 +
.../etc/hotplug.d/firmware/11-ath10k-caldata | 8 +
.../etc/hotplug.d/ieee80211/10_fix_wifi_mac | 3 +
target/linux/ipq806x/base-files/lib/ipq806x.sh | 3 +
.../base-files/lib/preinit/06_set_iface_mac | 23 +
.../ipq806x/base-files/lib/upgrade/platform.sh | 6 +-
.../arch/arm/boot/dts/qcom-ipq8064-tew827dru.dts | 354 +++++++++
target/linux/ipq806x/image/Makefile | 48 +-
.../linux/ipq806x/image/tew827dru-bootconfig.bin | Bin 0 -> 84 bytes
target/linux/ipq806x/image/tew827dru-flash.scr | 57 ++
.../linux/ipq806x/patches-4.4/800-devicetree.patch | 3 +-
16 files changed, 1361 insertions(+), 4 deletions(-)
create mode 100755 scripts/its-maker.sh
create mode 100644 target/linux/ipq806x/base-files/lib/preinit/06_set_iface_mac
create mode 100644 target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-tew827dru.dts
create mode 100644 target/linux/ipq806x/image/tew827dru-bootconfig.bin
create mode 100644 target/linux/ipq806x/image/tew827dru-flash.scr
--
2.9.3
More information about the Lede-dev
mailing list