[LEDE-DEV] [PATCH] cns3xxx: add GW2386 support
Tim Harvey
tharvey at gateworks.com
Wed Sep 7 14:05:42 PDT 2016
Signed-off-by: Tim Harvey <tharvey at gateworks.com>
---
.../cns3xxx/files/arch/arm/mach-cns3xxx/laguna.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/target/linux/cns3xxx/files/arch/arm/mach-cns3xxx/laguna.c b/target/linux/cns3xxx/files/arch/arm/mach-cns3xxx/laguna.c
index 667a8e5..fb519d2 100644
--- a/target/linux/cns3xxx/files/arch/arm/mach-cns3xxx/laguna.c
+++ b/target/linux/cns3xxx/files/arch/arm/mach-cns3xxx/laguna.c
@@ -728,6 +728,21 @@ static struct gpio laguna_gpio_gw2387[] = {
{ 113, GPIOF_IN , "DIO5" },
};
+static struct gpio laguna_gpio_gw2386[] = {
+ { 0, GPIOF_IN , "*GPS_PPS" },
+ { 2, GPIOF_IN , "*USB_FAULT#" },
+ { 6, GPIOF_OUT_INIT_LOW , "*USB_PCI_SEL" },
+ { 7, GPIOF_OUT_INIT_LOW , "*GSM_SEL0" },
+ { 8, GPIOF_OUT_INIT_LOW , "*GSM_SEL1" },
+ { 9, GPIOF_OUT_INIT_LOW , "*FP_SER_EN" },
+ { 108, GPIOF_IN , "DIO0" },
+ { 109, GPIOF_IN , "DIO1" },
+ { 110, GPIOF_IN , "DIO2" },
+ { 111, GPIOF_IN , "DIO3" },
+ { 112, GPIOF_IN , "DIO4" },
+ { 113, GPIOF_IN , "DIO5" },
+};
+
static struct gpio laguna_gpio_gw2385[] = {
{ 0, GPIOF_IN , "*GSC_IRQ#" },
{ 1, GPIOF_OUT_INIT_HIGH, "*USB_HST_VBUS_EN" },
@@ -1015,6 +1030,11 @@ static int __init laguna_model_setup(void)
laguna_register_gpio(ARRAY_AND_SIZE(laguna_gpio_gw2387));
// configure LED's
laguna_gpio_leds_data.num_leds = 2;
+ } else if (strncmp(laguna_info.model, "GW2386", 6) == 0) {
+ // configure GPIO's
+ laguna_register_gpio(ARRAY_AND_SIZE(laguna_gpio_gw2386));
+ // configure LED's
+ laguna_gpio_leds_data.num_leds = 2;
} else if (strncmp(laguna_info.model, "GW2385", 6) == 0) {
// configure GPIO's
laguna_register_gpio(ARRAY_AND_SIZE(laguna_gpio_gw2385));
--
1.9.1
More information about the Lede-dev
mailing list