[LEDE-DEV] [RFC 2/6 v2] x86: Add LED & GPIO drivers for the PC Engines APU2 board
Chris Blake
chrisrblake93 at gmail.com
Sat Oct 22 10:39:24 PDT 2016
This patch adds the following drivers to the x86 target:
leds-apu2 - A driver that enables usage of the onboard LEDs and Reset
button wired to the chipset. This driver uses DMI to only enable on the
APU2 board.
gpio-nct5104d - A driver that allows for usage of the SuperIO GPIO chip
on the PC Engines APU boards.
Signed-off-by: Chris Blake <chrisrblake93 at gmail.com>
---
.../linux/x86/files/drivers/gpio/gpio-nct5104d.c | 432 +++++++++++++++++++++
target/linux/x86/files/drivers/leds/leds-apu2.c | 374 ++++++++++++++++++
target/linux/x86/modules.mk | 21 +
.../x86/patches-4.4/800-add-apu2-led-driver.patch | 29 ++
.../patches-4.4/801-add-nct5104d-gpio-driver.patch | 27 ++
5 files changed, 883 insertions(+)
create mode 100644 target/linux/x86/files/drivers/gpio/gpio-nct5104d.c
create mode 100644 target/linux/x86/files/drivers/leds/leds-apu2.c
create mode 100644 target/linux/x86/modules.mk
create mode 100644 target/linux/x86/patches-4.4/800-add-apu2-led-driver.patch
create mode 100644 target/linux/x86/patches-4.4/801-add-nct5104d-gpio-driver.patch
diff --git a/target/linux/x86/files/drivers/gpio/gpio-nct5104d.c b/target/linux/x86/files/drivers/gpio/gpio-nct5104d.c
new file mode 100644
index 0000000..684037c
--- /dev/null
+++ b/target/linux/x86/files/drivers/gpio/gpio-nct5104d.c
@@ -0,0 +1,432 @@
+/*
+ * GPIO driver for NCT5104D
+ *
+ * Author: Tasanakorn Phaipool <tasanakorn at gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#define DRVNAME "gpio-nct5104d"
+
+/*
+ * Super-I/O registers
+ */
+#define SIO_LDSEL 0x07 /* Logical device select */
+#define SIO_CHIPID 0x20 /* Chaip ID (2 bytes) */
+#define SIO_GPIO_ENABLE 0x30 /* GPIO enable */
+#define SIO_GPIO1_MODE 0xE0 /* GPIO1 Mode OpenDrain/Push-Pull */
+#define SIO_GPIO2_MODE 0xE1 /* GPIO2 Mode OpenDrain/Push-Pull */
+
+#define SIO_LD_GPIO 0x07 /* GPIO logical device */
+#define SIO_LD_GPIO_MODE 0x0F /* GPIO mode control device */
+#define SIO_UNLOCK_KEY 0x87 /* Key to enable Super-I/O */
+#define SIO_LOCK_KEY 0xAA /* Key to disable Super-I/O */
+
+#define SIO_NCT5104D_ID 0x1061 /* Chip ID */
+#define SIO_PCENGINES_APU_NCT5104D_ID 0xc452 /* Chip ID */
+
+enum chips { nct5104d };
+
+static const char * const nct5104d_names[] = {
+ "nct5104d"
+};
+
+struct nct5104d_sio {
+ int addr;
+ enum chips type;
+};
+
+struct nct5104d_gpio_bank {
+ struct gpio_chip chip;
+ unsigned int regbase;
+ struct nct5104d_gpio_data *data;
+};
+
+struct nct5104d_gpio_data {
+ struct nct5104d_sio *sio;
+ int nr_bank;
+ struct nct5104d_gpio_bank *bank;
+};
+
+/*
+ * Super-I/O functions.
+ */
+
+static inline int superio_inb(int base, int reg)
+{
+ outb(reg, base);
+ return inb(base + 1);
+}
+
+static int superio_inw(int base, int reg)
+{
+ int val;
+
+ outb(reg++, base);
+ val = inb(base + 1) << 8;
+ outb(reg, base);
+ val |= inb(base + 1);
+
+ return val;
+}
+
+static inline void superio_outb(int base, int reg, int val)
+{
+ outb(reg, base);
+ outb(val, base + 1);
+}
+
+static inline int superio_enter(int base)
+{
+ /* Don't step on other drivers' I/O space by accident. */
+ if (!request_muxed_region(base, 2, DRVNAME)) {
+ pr_err(DRVNAME "I/O address 0x%04x already in use\n", base);
+ return -EBUSY;
+ }
+
+ /* According to the datasheet the key must be send twice. */
+ outb(SIO_UNLOCK_KEY, base);
+ outb(SIO_UNLOCK_KEY, base);
+
+ return 0;
+}
+
+static inline void superio_select(int base, int ld)
+{
+ outb(SIO_LDSEL, base);
+ outb(ld, base + 1);
+}
+
+static inline void superio_exit(int base)
+{
+ outb(SIO_LOCK_KEY, base);
+ release_region(base, 2);
+}
+
+/*
+ * GPIO chip.
+ */
+
+static int nct5104d_gpio_direction_in(struct gpio_chip *chip, unsigned offset);
+static int nct5104d_gpio_get(struct gpio_chip *chip, unsigned offset);
+static int nct5104d_gpio_direction_out(struct gpio_chip *chip,
+ unsigned offset, int value);
+static void nct5104d_gpio_set(struct gpio_chip *chip, unsigned offset, int value);
+
+#define NCT5104D_GPIO_BANK(_base, _ngpio, _regbase) \
+ { \
+ .chip = { \
+ .label = DRVNAME, \
+ .owner = THIS_MODULE, \
+ .direction_input = nct5104d_gpio_direction_in, \
+ .get = nct5104d_gpio_get, \
+ .direction_output = nct5104d_gpio_direction_out, \
+ .set = nct5104d_gpio_set, \
+ .base = _base, \
+ .ngpio = _ngpio, \
+ .can_sleep = true, \
+ }, \
+ .regbase = _regbase, \
+ }
+
+#define gpio_dir(base) (base + 0)
+#define gpio_data(base) (base + 1)
+
+static struct nct5104d_gpio_bank nct5104d_gpio_bank[] = {
+ NCT5104D_GPIO_BANK(0 , 8, 0xE0),
+ NCT5104D_GPIO_BANK(10, 8, 0xE4)
+};
+
+static int nct5104d_gpio_direction_in(struct gpio_chip *chip, unsigned offset)
+{
+ int err;
+ struct nct5104d_gpio_bank *bank =
+ container_of(chip, struct nct5104d_gpio_bank, chip);
+ struct nct5104d_sio *sio = bank->data->sio;
+ u8 dir;
+
+ err = superio_enter(sio->addr);
+ if (err)
+ return err;
+ superio_select(sio->addr, SIO_LD_GPIO);
+
+ dir = superio_inb(sio->addr, gpio_dir(bank->regbase));
+ dir |= (1 << offset);
+ superio_outb(sio->addr, gpio_dir(bank->regbase), dir);
+
+ superio_exit(sio->addr);
+
+ return 0;
+}
+
+static int nct5104d_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ int err;
+ struct nct5104d_gpio_bank *bank =
+ container_of(chip, struct nct5104d_gpio_bank, chip);
+ struct nct5104d_sio *sio = bank->data->sio;
+ u8 data;
+
+ err = superio_enter(sio->addr);
+ if (err)
+ return err;
+ superio_select(sio->addr, SIO_LD_GPIO);
+
+ data = superio_inb(sio->addr, gpio_data(bank->regbase));
+
+ superio_exit(sio->addr);
+
+ return !!(data & 1 << offset);
+}
+
+static int nct5104d_gpio_direction_out(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ int err;
+ struct nct5104d_gpio_bank *bank =
+ container_of(chip, struct nct5104d_gpio_bank, chip);
+ struct nct5104d_sio *sio = bank->data->sio;
+ u8 dir, data_out;
+
+ err = superio_enter(sio->addr);
+ if (err)
+ return err;
+ superio_select(sio->addr, SIO_LD_GPIO);
+
+ data_out = superio_inb(sio->addr, gpio_data(bank->regbase));
+ if (value)
+ data_out |= (1 << offset);
+ else
+ data_out &= ~(1 << offset);
+ superio_outb(sio->addr, gpio_data(bank->regbase), data_out);
+
+ dir = superio_inb(sio->addr, gpio_dir(bank->regbase));
+ dir &= ~(1 << offset);
+ superio_outb(sio->addr, gpio_dir(bank->regbase), dir);
+
+ superio_exit(sio->addr);
+
+ return 0;
+}
+
+static void nct5104d_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ int err;
+ struct nct5104d_gpio_bank *bank =
+ container_of(chip, struct nct5104d_gpio_bank, chip);
+ struct nct5104d_sio *sio = bank->data->sio;
+ u8 data_out;
+
+ err = superio_enter(sio->addr);
+ if (err)
+ return;
+ superio_select(sio->addr, SIO_LD_GPIO);
+
+ data_out = superio_inb(sio->addr, gpio_data(bank->regbase));
+ if (value)
+ data_out |= (1 << offset);
+ else
+ data_out &= ~(1 << offset);
+ superio_outb(sio->addr, gpio_data(bank->regbase), data_out);
+
+ superio_exit(sio->addr);
+}
+
+/*
+ * Platform device and driver.
+ */
+
+static int nct5104d_gpio_probe(struct platform_device *pdev)
+{
+ int err;
+ int i;
+ struct nct5104d_sio *sio = pdev->dev.platform_data;
+ struct nct5104d_gpio_data *data;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ switch (sio->type) {
+ case nct5104d:
+ data->nr_bank = ARRAY_SIZE(nct5104d_gpio_bank);
+ data->bank = nct5104d_gpio_bank;
+ break;
+ default:
+ return -ENODEV;
+ }
+ data->sio = sio;
+
+ platform_set_drvdata(pdev, data);
+
+ /* For each GPIO bank, register a GPIO chip. */
+ for (i = 0; i < data->nr_bank; i++) {
+ struct nct5104d_gpio_bank *bank = &data->bank[i];
+
+ bank->chip.dev = &pdev->dev;
+ bank->data = data;
+
+ err = gpiochip_add(&bank->chip);
+ if (err) {
+ dev_err(&pdev->dev,
+ "Failed to register gpiochip %d: %d\n",
+ i, err);
+ goto err_gpiochip;
+ }
+ }
+
+ return 0;
+
+err_gpiochip:
+ for (i = i - 1; i >= 0; i--) {
+ struct nct5104d_gpio_bank *bank = &data->bank[i];
+
+ gpiochip_remove(&bank->chip);
+ }
+
+ return err;
+}
+
+static int nct5104d_gpio_remove(struct platform_device *pdev)
+{
+ int i;
+ struct nct5104d_gpio_data *data = platform_get_drvdata(pdev);
+
+ for (i = 0; i < data->nr_bank; i++) {
+ struct nct5104d_gpio_bank *bank = &data->bank[i];
+ gpiochip_remove(&bank->chip);
+ }
+
+ return 0;
+}
+
+static int __init nct5104d_find(int addr, struct nct5104d_sio *sio)
+{
+ int err;
+ u16 devid;
+ u8 gpio_cfg;
+
+ err = superio_enter(addr);
+ if (err)
+ return err;
+
+ err = -ENODEV;
+
+ devid = superio_inw(addr, SIO_CHIPID);
+ switch (devid) {
+ case SIO_NCT5104D_ID:
+ case SIO_PCENGINES_APU_NCT5104D_ID:
+ sio->type = nct5104d;
+ /* enable GPIO0 and GPIO1 */
+ superio_select(addr, SIO_LD_GPIO);
+ gpio_cfg = superio_inb(addr, SIO_GPIO_ENABLE);
+ gpio_cfg |= 0x03;
+ superio_outb(addr, SIO_GPIO_ENABLE, gpio_cfg);
+ break;
+ default:
+ pr_info(DRVNAME ": Unsupported device 0x%04x\n", devid);
+ goto err;
+ }
+ sio->addr = addr;
+ err = 0;
+
+ pr_info(DRVNAME ": Found %s at %#x chip id 0x%04x\n",
+ nct5104d_names[sio->type],
+ (unsigned int) addr,
+ (int) superio_inw(addr, SIO_CHIPID));
+
+ superio_select(sio->addr, SIO_LD_GPIO_MODE);
+ superio_outb(sio->addr, SIO_GPIO1_MODE, 0x0);
+ superio_outb(sio->addr, SIO_GPIO2_MODE, 0x0);
+
+err:
+ superio_exit(addr);
+ return err;
+}
+
+static struct platform_device *nct5104d_gpio_pdev;
+
+static int __init
+nct5104d_gpio_device_add(const struct nct5104d_sio *sio)
+{
+ int err;
+
+ nct5104d_gpio_pdev = platform_device_alloc(DRVNAME, -1);
+ if (!nct5104d_gpio_pdev)
+ pr_err(DRVNAME ": Error platform_device_alloc\n");
+ if (!nct5104d_gpio_pdev)
+ return -ENOMEM;
+
+ err = platform_device_add_data(nct5104d_gpio_pdev,
+ sio, sizeof(*sio));
+ if (err) {
+ pr_err(DRVNAME "Platform data allocation failed\n");
+ goto err;
+ }
+
+ err = platform_device_add(nct5104d_gpio_pdev);
+ if (err) {
+ pr_err(DRVNAME "Device addition failed\n");
+ goto err;
+ }
+ pr_info(DRVNAME ": Device added\n");
+ return 0;
+
+err:
+ platform_device_put(nct5104d_gpio_pdev);
+
+ return err;
+}
+
+/*
+ */
+
+static struct platform_driver nct5104d_gpio_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = DRVNAME,
+ },
+ .probe = nct5104d_gpio_probe,
+ .remove = nct5104d_gpio_remove,
+};
+
+static int __init nct5104d_gpio_init(void)
+{
+ int err;
+ struct nct5104d_sio sio;
+
+ if (nct5104d_find(0x2e, &sio) &&
+ nct5104d_find(0x4e, &sio))
+ return -ENODEV;
+
+ err = platform_driver_register(&nct5104d_gpio_driver);
+ if (!err) {
+ pr_info(DRVNAME ": platform_driver_register\n");
+ err = nct5104d_gpio_device_add(&sio);
+ if (err)
+ platform_driver_unregister(&nct5104d_gpio_driver);
+ }
+
+ return err;
+}
+subsys_initcall(nct5104d_gpio_init);
+
+static void __exit nct5104d_gpio_exit(void)
+{
+ platform_device_unregister(nct5104d_gpio_pdev);
+ platform_driver_unregister(&nct5104d_gpio_driver);
+}
+module_exit(nct5104d_gpio_exit);
+
+MODULE_DESCRIPTION("GPIO driver for Super-I/O chips NCT5104D");
+MODULE_AUTHOR("Tasanakorn Phaipool <tasanakorn at gmail.com>");
+MODULE_LICENSE("GPL");
diff --git a/target/linux/x86/files/drivers/leds/leds-apu2.c b/target/linux/x86/files/drivers/leds/leds-apu2.c
new file mode 100644
index 0000000..011eb31
--- /dev/null
+++ b/target/linux/x86/files/drivers/leds/leds-apu2.c
@@ -0,0 +1,374 @@
+/*
+ * APU2 LED/GPIO Driver
+ * Copyright (c) 2016 Christian Lamparter <chunkeey (at) googlemail.com>
+ *
+ * Based on gpio-apu2.c - AMD FCH GPIO support for PC-Engines APU-2 board
+ *
+ * Copyright (c) 2015 Carsten Spiess <fli4l at carsten-spiess.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+ #include <linux/module.h>
+ #include <linux/types.h>
+ #include <linux/miscdevice.h>
+ #include <linux/gpio.h>
+ #include <linux/init.h>
+ #include <linux/pci.h>
+ #include <linux/ioport.h>
+ #include <linux/platform_device.h>
+ #include <linux/uaccess.h>
+ #include <linux/io.h>
+ #include <linux/version.h>
+ #include <linux/dmi.h>
+ #include <linux/string.h>
+
+ #include <linux/leds.h>
+ #include <linux/input.h>
+ #include <linux/gpio_keys.h>
+
+ #define DEVNAME "gpio-apu2"
+
+ #define FCH_ACPI_MMIO_BASE 0xFED80000
+ #define FCH_GPIO_BASE (FCH_ACPI_MMIO_BASE + 0x1500)
+ #define FCH_GPIO_SIZE 0x300
+
+ #define APU_NUM_GPIO 4
+
+ #define GPIO_BIT_DIR 23
+ #define GPIO_BIT_WRITE 22
+ #define GPIO_BIT_READ 16
+
+ /* internal variables */
+ static struct pci_dev *gpio_apu2_pci;
+ static DEFINE_SPINLOCK (gpio_lock);
+
+ /* the watchdog platform device */
+ static struct platform_device *gpio_apu2_platform_device;
+ static struct platform_device *leddev;
+ static struct platform_device *keydev;
+
+ static const struct pci_device_id gpio_apu2_pci_tbl[] ={
+ {PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SMBUS, PCI_ANY_ID, PCI_ANY_ID},
+ { 0, } /* End of list */
+ };
+ MODULE_DEVICE_TABLE (pci, gpio_apu2_pci_tbl);
+
+ /* EGPIO89=GPIO32, AGPIO68=GPIO57, AGPIO69=GPIO58, AGPIO70=GPIO59 */
+ static u8 gpio_offset[APU_NUM_GPIO] = {89, 68, 69, 70};
+
+ static void __iomem *gpio_addr[APU_NUM_GPIO] = {NULL, NULL, NULL, NULL};
+
+ static int gpio_apu2_get_dir (struct gpio_chip *chip, unsigned offset)
+ {
+ u32 val;
+
+ val = ~ioread32 (gpio_addr[offset]);
+
+ return (val >> GPIO_BIT_DIR) & 1;
+ }
+
+ static int gpio_apu2_dir_in (struct gpio_chip *gc, unsigned offset)
+ {
+ u32 val;
+
+ spin_lock_bh (&gpio_lock);
+
+ val = ioread32 (gpio_addr[offset]);
+ val &= ~BIT(GPIO_BIT_DIR);
+ iowrite32 (val, gpio_addr[offset]);
+
+ spin_unlock_bh (&gpio_lock);
+
+ return 0;
+ }
+
+ static int gpio_apu2_dir_out (struct gpio_chip *chip, unsigned offset,
+ int value)
+ {
+ u32 val;
+
+ spin_lock_bh (&gpio_lock);
+
+ val = ioread32 (gpio_addr[offset]);
+ val |= BIT(GPIO_BIT_DIR);
+ iowrite32 (val, gpio_addr[offset]);
+
+ spin_unlock_bh (&gpio_lock);
+
+ return 0;
+ }
+
+ static int gpio_apu2_get_data (struct gpio_chip *chip, unsigned offset)
+ {
+ u32 val;
+
+ val = ioread32 (gpio_addr[offset]);
+
+ return (val >> GPIO_BIT_READ) & 1;
+ }
+
+ static void gpio_apu2_set_data (struct gpio_chip *chip, unsigned offset, int value)
+ {
+ u32 val;
+
+ spin_lock_bh (&gpio_lock);
+
+ val = ioread32 (gpio_addr[offset]);
+
+ if (value)
+ val |= BIT(GPIO_BIT_WRITE);
+ else
+ val &= ~BIT(GPIO_BIT_WRITE);
+
+ iowrite32 (val, gpio_addr[offset]);
+
+ spin_unlock_bh (&gpio_lock);
+ }
+
+ static struct gpio_chip gpio_apu2_chip = {
+ .label = DEVNAME,
+ .owner = THIS_MODULE,
+ .base = -1,
+ .ngpio = APU_NUM_GPIO,
+ .get_direction = gpio_apu2_get_dir,
+ .direction_input = gpio_apu2_dir_in,
+ .direction_output = gpio_apu2_dir_out,
+ .get = gpio_apu2_get_data,
+ .set = gpio_apu2_set_data,
+ };
+
+ /*
+ *
+ */
+ static int gpio_apu2_probe (struct platform_device *dev)
+ {
+ int ret = 0;
+ int i;
+ struct pci_dev *pci_dev = NULL;
+
+ /* Match the PCI device */
+ for_each_pci_dev (pci_dev) {
+ if (pci_match_id (gpio_apu2_pci_tbl, pci_dev) != NULL) {
+ gpio_apu2_pci = pci_dev;
+ break;
+ }
+ }
+
+ if (!gpio_apu2_pci)
+ return -ENODEV;
+
+ pr_info ("%s: PCI Revision ID: 0x%x\n", DEVNAME, gpio_apu2_pci->revision);
+
+ /* Determine type of southbridge chipset */
+ if (gpio_apu2_pci->revision < 0x40) {
+ return -EACCES;
+ }
+
+ /* Request memory region for GPIO's */
+ if (!devm_request_mem_region (&dev->dev, FCH_GPIO_BASE,
+ FCH_GPIO_SIZE, DEVNAME)){
+ pr_err ("%s: request GPIO mem region failed\n", DEVNAME);
+ return -ENXIO;
+ }
+
+ /* Map IO's for GPIO's */
+ for (i = 0; i < APU_NUM_GPIO; i++) {
+ gpio_addr[i] = devm_ioremap (&dev->dev,
+ FCH_GPIO_BASE + (gpio_offset[i] * sizeof (u32)), sizeof (u32));
+ if (!gpio_addr[i]) {
+ pr_err ("%s: map GPIO%d address failed\n", DEVNAME, gpio_offset[i]);
+ return -ENXIO;
+ }
+ }
+
+ gpio_apu2_chip.dev = &dev->dev;
+ ret = gpiochip_add (&gpio_apu2_chip);
+ if (ret) {
+ pr_err ("%s: adding gpiochip failed\n", DEVNAME);
+ }
+
+ return ret;
+ }
+
+ static int gpio_apu2_remove (struct platform_device *dev)
+ {
+ #if LINUX_VERSION_CODE < KERNEL_VERSION(3,18,0)
+ int ret;
+ ret = gpiochip_remove (&gpio_apu2_chip);
+ #else /* LINUX_VERSION_CODE < KERNEL_VERSION(3,18,0) */
+ gpiochip_remove (&gpio_apu2_chip);
+ #endif /* LINUX_VERSION_CODE < KERNEL_VERSION(3,18,0) */
+ return 0;
+ }
+
+ static struct platform_driver gpio_apu2_driver = {
+ .probe = gpio_apu2_probe,
+ .remove = gpio_apu2_remove,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = DEVNAME
+ }
+ };
+
+ static struct gpio_led apu2_leds_gpio[] = {
+ {
+ .name = "apu2:green:power",
+ .gpio = 509,
+ .active_low = 1,
+ },
+ {
+ .name = "apu2:green:led2",
+ .gpio = 510,
+ .active_low = 1,
+ },
+ {
+ .name = "apu2:green:led3",
+ .gpio = 511,
+ .active_low = 1,
+ },
+ };
+
+ static struct gpio_keys_button apu2_gpio_keys[] = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = 60,
+ .gpio = 508,
+ .active_low = 1,
+ },
+ };
+
+ static void register_gpio_keys_polled(int id, unsigned poll_interval,
+ unsigned nbuttons,
+ struct gpio_keys_button *buttons)
+ {
+ struct gpio_keys_platform_data pdata = { };
+ int err;
+
+ keydev = platform_device_alloc("gpio-keys-polled", id);
+ if (!keydev) {
+ printk(KERN_ERR "Failed to allocate gpio-keys platform device\n");
+ return;
+ }
+
+ pdata.poll_interval = poll_interval;
+ pdata.nbuttons = nbuttons;
+ pdata.buttons = buttons;
+
+ err = platform_device_add_data(keydev, &pdata, sizeof(pdata));
+ if (err) {
+ dev_err(&keydev->dev, "failed to add platform data to key driver (%d)", err);
+ goto err_put_pdev;
+ }
+
+ err = platform_device_add(keydev);
+ if (err) {
+ dev_err(&keydev->dev, "failed to register key platform device (%d)", err);
+ goto err_put_pdev;
+ }
+
+ return;
+
+ err_put_pdev:
+ platform_device_put(keydev);
+ keydev = NULL;
+ }
+
+ static void register_leds_gpio(int id, unsigned num_leds, struct gpio_led *leds)
+ {
+ struct gpio_led_platform_data pdata = { };
+ int err;
+
+ leddev = platform_device_alloc("leds-gpio", id);
+ if (!leddev) {
+ printk(KERN_ERR "Failed to allocate leds-gpio platform device\n");
+ return;
+ }
+
+ pdata.num_leds = num_leds;
+ pdata.leds = leds;
+
+ err = platform_device_add_data(leddev, &pdata, sizeof(pdata));
+ if (err) {
+ dev_err(&leddev->dev, "failed to add platform data to key driver (%d)", err);
+ goto err_put_pdev;
+ }
+
+ err = platform_device_add(leddev);
+ if (err) {
+ dev_err(&leddev->dev, "failed to register key platform device (%d)", err);
+ goto err_put_pdev;
+ }
+
+ return;
+
+ err_put_pdev:
+ platform_device_put(leddev);
+ leddev = NULL;
+ }
+
+ static int __init gpio_apu2_init (void)
+ {
+ int err;
+ const char *board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
+ const char *board_name = dmi_get_system_info(DMI_BOARD_NAME);
+
+ /* Match the device name/model */
+ if (!board_name || !board_vendor || strcmp(board_vendor, "PC Engines") || strcasecmp(board_name, "apu2")) {
+ err = -ENODEV;
+ goto exit;
+ }
+
+ pr_info ("%s: load APU2/LED GPIO driver module\n", DEVNAME);
+
+ err = platform_driver_register (&gpio_apu2_driver);
+ if (err)
+ goto exit;
+
+ gpio_apu2_platform_device = platform_device_register_simple (DEVNAME, -1, NULL, 0);
+ if (IS_ERR(gpio_apu2_platform_device)) {
+ err = PTR_ERR(gpio_apu2_platform_device);
+ goto exit_driver;
+ }
+
+ pr_info ("%s: APU2 GPIO/LED driver module loaded\n", DEVNAME);
+
+ register_leds_gpio(-1, ARRAY_SIZE(apu2_leds_gpio), apu2_leds_gpio);
+ register_gpio_keys_polled(-1, 20, ARRAY_SIZE(apu2_gpio_keys), apu2_gpio_keys);
+ return 0;
+
+ exit_driver:
+ platform_driver_unregister (&gpio_apu2_driver);
+ exit:
+ return err;
+ }
+
+ static void __exit gpio_apu2_exit (void)
+ {
+ platform_device_unregister (gpio_apu2_platform_device);
+ platform_device_unregister (leddev);
+ platform_device_unregister (keydev);
+ platform_driver_unregister (&gpio_apu2_driver);
+ pr_info ("%s: APU2 GPIO/LED driver module unloaded\n", DEVNAME);
+ }
+
+ MODULE_AUTHOR ("Carsten Spiess <fli4l at carsten-spiess.de>");
+ MODULE_DESCRIPTION("GPIO driver for AMD FCH on PC-Engines APU-2");
+ MODULE_LICENSE("GPL");
+
+ module_init (gpio_apu2_init);
+ module_exit (gpio_apu2_exit);
diff --git a/target/linux/x86/modules.mk b/target/linux/x86/modules.mk
new file mode 100644
index 0000000..1fc5ce5
--- /dev/null
+++ b/target/linux/x86/modules.mk
@@ -0,0 +1,21 @@
+#
+# Copyright (C) 2016 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define KernelPackage/gpio-nct5104d
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=nct5104d GPIO Support
+ DEPENDS:=@TARGET_x86 @GPIO_SUPPORT
+ KCONFIG:=CONFIG_GPIO_NCT5104D
+ FILES:=$(LINUX_DIR)/drivers/gpio/gpio-nct5104d.ko
+ AUTOLOAD:=$(call AutoLoad,60,gpio-nct5104d)
+endef
+
+define KernelPackage/gpio-nct5104d/description
+ Kernel module for the nct5104d Super I/O chip on PC Engine APU boards.
+endef
+
+$(eval $(call KernelPackage,gpio-nct5104d))
diff --git a/target/linux/x86/patches-4.4/800-add-apu2-led-driver.patch b/target/linux/x86/patches-4.4/800-add-apu2-led-driver.patch
new file mode 100644
index 0000000..5720fc3
--- /dev/null
+++ b/target/linux/x86/patches-4.4/800-add-apu2-led-driver.patch
@@ -0,0 +1,29 @@
+--- a/drivers/leds/Kconfig 2016-09-15 01:29:29.000000000 -0500
++++ b/drivers/leds/Kconfig 2016-09-26 02:36:55.349774421 -0500
+@@ -49,6 +49,15 @@
+ help
+ This option enables support for the LEDs on the AAT1290.
+
++config LEDS_APU2
++ tristate "LED Support for the PCEngines APU2 board"
++ depends on LEDS_CLASS
++ depends on GPIOLIB
++ help
++ This option enables support for the CPU GPIO pins on the PCEngines
++ APU2 board, as well as adds system support for the reset button and
++ front panel LEDs.
++
+ config LEDS_BCM6328
+ tristate "LED Support for Broadcom BCM6328"
+ depends on LEDS_CLASS
+diff -Naur ./a/Makefile ./b/Makefile
+--- a/drivers/leds/Makefile 2016-09-26 02:23:39.787307000 -0500
++++ b/drivers/leds/Makefile 2016-09-26 02:39:41.669443541 -0500
+@@ -8,6 +8,7 @@
+ # LED Platform Drivers
+ obj-$(CONFIG_LEDS_88PM860X) += leds-88pm860x.o
+ obj-$(CONFIG_LEDS_AAT1290) += leds-aat1290.o
++obj-$(CONFIG_LEDS_APU2) += leds-apu2.o
+ obj-$(CONFIG_LEDS_BCM6328) += leds-bcm6328.o
+ obj-$(CONFIG_LEDS_BCM6358) += leds-bcm6358.o
+ obj-$(CONFIG_LEDS_BD2802) += leds-bd2802.o
diff --git a/target/linux/x86/patches-4.4/801-add-nct5104d-gpio-driver.patch b/target/linux/x86/patches-4.4/801-add-nct5104d-gpio-driver.patch
new file mode 100644
index 0000000..c48ccf0
--- /dev/null
+++ b/target/linux/x86/patches-4.4/801-add-nct5104d-gpio-driver.patch
@@ -0,0 +1,27 @@
+--- a/drivers/gpio/Kconfig 2016-09-15 01:29:29.000000000 -0500
++++ b/drivers/gpio/Kconfig 2016-09-26 02:29:15.714674624 -0500
+@@ -307,6 +307,13 @@
+ select GPIO_GENERIC
+ select GENERIC_IRQ_CHIP
+
++config GPIO_NCT5104D
++ tristate "NCT5104D GPIO support"
++ depends on X86 # unconditional access to IO space.
++ select GPIO_GENERIC
++ help
++ Say yes here to support GPIO functionality of NCT5104D super I/O chip.
++
+ config GPIO_OCTEON
+ tristate "Cavium OCTEON GPIO"
+ depends on GPIOLIB && CAVIUM_OCTEON_SOC
+diff -Naur ./a/Makefile ./b/Makefile
+--- a/drivers/gpio/Makefile 2016-09-15 01:29:29.000000000 -0500
++++ b/drivers/gpio/Makefile 2016-09-26 02:25:57.807051231 -0500
+@@ -69,6 +69,7 @@
+ obj-$(CONFIG_GPIO_MVEBU) += gpio-mvebu.o
+ obj-$(CONFIG_GPIO_MXC) += gpio-mxc.o
+ obj-$(CONFIG_GPIO_MXS) += gpio-mxs.o
++obj-$(CONFIG_GPIO_NCT5104D) += gpio-nct5104d.o
+ obj-$(CONFIG_GPIO_OCTEON) += gpio-octeon.o
+ obj-$(CONFIG_GPIO_OMAP) += gpio-omap.o
+ obj-$(CONFIG_GPIO_PCA953X) += gpio-pca953x.o
--
2.7.4
More information about the Lede-dev
mailing list